* drm_atomic_helper_wait_for_fences - wait for fences stashed in plane state
* @dev: DRM device
* @state: atomic state object with old state structures
- * @pre_swap: if true, do an interruptible wait
+ * @pre_swap: If true, do an interruptible wait, and @state is the new state.
+ * Otherwise @state is the old state.
*
* For implicit sync, driver should fish the exclusive fence out from the
* incoming fb's and stash it in the drm_plane_state. This is called after
* drm_atomic_helper_swap_state() so it uses the current plane state (and
* just uses the atomic state to find the changed planes)
*
+ * Note that @pre_swap is needed since the point where we block for fences moves
+ * around depending upon whether an atomic commit is blocking or
+ * non-blocking. For async commit all waiting needs to happen after
+ * drm_atomic_helper_swap_state() is called, but for synchronous commits we want
+ * to wait **before** we do anything that can't be easily rolled back. That is
+ * before we call drm_atomic_helper_swap_state().
+ *
* Returns zero if success or < 0 if dma_fence_wait() fails.
*/
int drm_atomic_helper_wait_for_fences(struct drm_device *dev,
/**
* drm_atomic_helper_commit_tail - commit atomic update to hardware
- * @state: new modeset state to be committed
+ * @old_state: atomic state object with old state structures
*
* This is the default implemenation for the ->atomic_commit_tail() hook of the
* &drm_mode_config_helper_funcs vtable.
*
* For drivers supporting runtime PM the recommended sequence is instead ::
*
- * drm_atomic_helper_commit_modeset_disables(dev, state);
+ * drm_atomic_helper_commit_modeset_disables(dev, old_state);
*
- * drm_atomic_helper_commit_modeset_enables(dev, state);
+ * drm_atomic_helper_commit_modeset_enables(dev, old_state);
*
- * drm_atomic_helper_commit_planes(dev, state,
+ * drm_atomic_helper_commit_planes(dev, old_state,
* DRM_PLANE_COMMIT_ACTIVE_ONLY);
*
* for committing the atomic update to hardware. See the kerneldoc entries for
* these three functions for more details.
*/
-void drm_atomic_helper_commit_tail(struct drm_atomic_state *state)
+void drm_atomic_helper_commit_tail(struct drm_atomic_state *old_state)
{
- struct drm_device *dev = state->dev;
+ struct drm_device *dev = old_state->dev;
- drm_atomic_helper_commit_modeset_disables(dev, state);
+ drm_atomic_helper_commit_modeset_disables(dev, old_state);
- drm_atomic_helper_commit_planes(dev, state, 0);
+ drm_atomic_helper_commit_planes(dev, old_state, 0);
- drm_atomic_helper_commit_modeset_enables(dev, state);
+ drm_atomic_helper_commit_modeset_enables(dev, old_state);
- drm_atomic_helper_commit_hw_done(state);
+ drm_atomic_helper_commit_hw_done(old_state);
- drm_atomic_helper_wait_for_vblanks(dev, state);
+ drm_atomic_helper_wait_for_vblanks(dev, old_state);
- drm_atomic_helper_cleanup_planes(dev, state);
+ drm_atomic_helper_cleanup_planes(dev, old_state);
}
EXPORT_SYMBOL(drm_atomic_helper_commit_tail);
-static void commit_tail(struct drm_atomic_state *state)
+static void commit_tail(struct drm_atomic_state *old_state)
{
- struct drm_device *dev = state->dev;
+ struct drm_device *dev = old_state->dev;
struct drm_mode_config_helper_funcs *funcs;
funcs = dev->mode_config.helper_private;
- drm_atomic_helper_wait_for_fences(dev, state, false);
+ drm_atomic_helper_wait_for_fences(dev, old_state, false);
- drm_atomic_helper_wait_for_dependencies(state);
+ drm_atomic_helper_wait_for_dependencies(old_state);
if (funcs && funcs->atomic_commit_tail)
- funcs->atomic_commit_tail(state);
+ funcs->atomic_commit_tail(old_state);
else
- drm_atomic_helper_commit_tail(state);
+ drm_atomic_helper_commit_tail(old_state);
- drm_atomic_helper_commit_cleanup_done(state);
+ drm_atomic_helper_commit_cleanup_done(old_state);
- drm_atomic_state_put(state);
+ drm_atomic_state_put(old_state);
}
static void commit_work(struct work_struct *work)
/**
* drm_atomic_helper_wait_for_dependencies - wait for required preceeding commits
- * @state: new modeset state to be committed
+ * @old_state: atomic state object with old state structures
*
* This function waits for all preceeding commits that touch the same CRTC as
- * @state to both be committed to the hardware (as signalled by
+ * @old_state to both be committed to the hardware (as signalled by
* drm_atomic_helper_commit_hw_done) and executed by the hardware (as signalled
* by calling drm_crtc_vblank_send_event on the event member of
* &drm_crtc_state).
* This is part of the atomic helper support for nonblocking commits, see
* drm_atomic_helper_setup_commit() for an overview.
*/
-void drm_atomic_helper_wait_for_dependencies(struct drm_atomic_state *state)
+void drm_atomic_helper_wait_for_dependencies(struct drm_atomic_state *old_state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int i;
long ret;
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ for_each_crtc_in_state(old_state, crtc, crtc_state, i) {
spin_lock(&crtc->commit_lock);
commit = preceeding_commit(crtc);
if (commit)
/**
* drm_atomic_helper_commit_hw_done - setup possible nonblocking commit
- * @state: new modeset state to be committed
+ * @old_state: atomic state object with old state structures
*
* This function is used to signal completion of the hardware commit step. After
* this step the driver is not allowed to read or change any permanent software
* This is part of the atomic helper support for nonblocking commits, see
* drm_atomic_helper_setup_commit() for an overview.
*/
-void drm_atomic_helper_commit_hw_done(struct drm_atomic_state *state)
+void drm_atomic_helper_commit_hw_done(struct drm_atomic_state *old_state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
struct drm_crtc_commit *commit;
int i;
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- commit = state->crtcs[i].commit;
+ for_each_crtc_in_state(old_state, crtc, crtc_state, i) {
+ commit = old_state->crtcs[i].commit;
if (!commit)
continue;
/**
* drm_atomic_helper_commit_cleanup_done - signal completion of commit
- * @state: new modeset state to be committed
+ * @old_state: atomic state object with old state structures
*
- * This signals completion of the atomic update @state, including any cleanup
- * work. If used, it must be called right before calling
+ * This signals completion of the atomic update @old_state, including any
+ * cleanup work. If used, it must be called right before calling
* drm_atomic_state_put().
*
* This is part of the atomic helper support for nonblocking commits, see
* drm_atomic_helper_setup_commit() for an overview.
*/
-void drm_atomic_helper_commit_cleanup_done(struct drm_atomic_state *state)
+void drm_atomic_helper_commit_cleanup_done(struct drm_atomic_state *old_state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int i;
long ret;
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- commit = state->crtcs[i].commit;
+ for_each_crtc_in_state(old_state, crtc, crtc_state, i) {
+ commit = old_state->crtcs[i].commit;
if (WARN_ON(!commit))
continue;
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff