spi/bcm63xx: don't use the stopping state

We do not need to use a flag to indicate if the master driver is stopping
it is sufficient to perform spi master unregistering in the platform
driver's remove function.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 63b0028a8bd35bdaec2b5791acdaf399ca7e0889..80e5ed34e0d91ae30d1286c53ec130d27dc15557 100644 (file)
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -39,8 +39,6 @@
 #define DRV_VER                "0.1.2"
 
 struct bcm63xx_spi {
-       spinlock_t              lock;
-       int                     stopping;
        struct completion       done;
 
        void __iomem            *regs;
@@ -161,9 +159,6 @@ static int bcm63xx_spi_setup(struct spi_device *spi)
 
        bs = spi_master_get_devdata(spi->master);
 
-       if (bs->stopping)
-               return -ESHUTDOWN;
-
        if (!spi->bits_per_word)
                spi->bits_per_word = 8;
 
@@ -410,10 +405,8 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
        master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
        master->transfer_one_message = bcm63xx_spi_transfer_one;
        bs->speed_hz = pdata->speed_hz;
-       bs->stopping = 0;
        bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
        bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
-       spin_lock_init(&bs->lock);
 
        /* Initialize hardware */
        clk_enable(bs->clk);
@@ -447,18 +440,16 @@ static int __devexit bcm63xx_spi_remove(struct platform_device *pdev)
        struct spi_master *master = platform_get_drvdata(pdev);
        struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 
+       spi_unregister_master(master);
+
        /* reset spi block */
        bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-       spin_lock(&bs->lock);
-       bs->stopping = 1;
 
        /* HW shutdown */
        clk_disable(bs->clk);
        clk_put(bs->clk);
 
-       spin_unlock(&bs->lock);
        platform_set_drvdata(pdev, 0);
-       spi_unregister_master(master);
 
        return 0;
 }