staging: comedi: daqboard2000: rename register offset macros
authorIan Abbott <abbotti@mev.co.uk>
Thu, 19 May 2016 18:15:19 +0000 (19:15 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Sat, 18 Jun 2016 03:57:54 +0000 (20:57 -0700)
Rename the macros defining register offsets to avoid CamelCase, and to
use namespace associated with the driver.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/daqboard2000.c

index c99773d20451fcd8d5f2d3e1cac471024791c723..32053ee388bd37835054409ec4b3bc39ad43e362 100644 (file)
@@ -151,35 +151,35 @@ static const struct comedi_lrange range_daqboard2000_ai = {
 /*
  * Register Memory Map
  */
-#define acqControl                     0x00            /* u16 */
-#define acqScanListFIFO                        0x02            /* u16 */
-#define acqPacerClockDivLow            0x04            /* u32 */
-#define acqScanCounter                 0x08            /* u16 */
-#define acqPacerClockDivHigh           0x0a            /* u16 */
-#define acqTriggerCount                        0x0c            /* u16 */
-#define acqResultsFIFO                 0x10            /* u16 */
-#define acqResultsShadow               0x14            /* u16 */
-#define acqAdcResult                   0x18            /* u16 */
-#define dacScanCounter                 0x1c            /* u16 */
-#define dacControl                     0x20            /* u16 */
-#define dacFIFO                                0x24            /* s16 */
-#define dacPacerClockDiv               0x2a            /* u16 */
-#define refDacs                                0x2c            /* u16 */
-#define dioControl                     0x30            /* u16 */
-#define dioP3hsioData                  0x32            /* s16 */
-#define dioP3Control                   0x34            /* u16 */
-#define calEepromControl               0x36            /* u16 */
-#define dacSetting(x)                  (0x38 + (x) * 2) /* s16 */
-#define dioP2ExpansionIO8Bit           0x40            /* s16 */
-#define ctrTmrControl                  0x80            /* u16 */
-#define ctrInput(x)                    (0x88 + (x) * 2) /* s16 */
-#define timerDivisor(x)                        (0xa0 + (x) * 2) /* u16 */
-#define dmaControl                     0xb0            /* u16 */
-#define trigControl                    0xb2            /* u16 */
-#define calEeprom                      0xb8            /* u16 */
-#define acqDigitalMark                 0xba            /* u16 */
-#define trigDacs                       0xbc            /* u16 */
-#define dioP2ExpansionIO16Bit(x)       (0xc0 + (x) * 2) /* s16 */
+#define DB2K_REG_ACQ_CONTROL                   0x00            /* u16 */
+#define DB2K_REG_ACQ_SCAN_LIST_FIFO            0x02            /* u16 */
+#define DB2K_REG_ACQ_PACER_CLOCK_DIV_LOW       0x04            /* u32 */
+#define DB2K_REG_ACQ_SCAN_COUNTER              0x08            /* u16 */
+#define DB2K_REG_ACQ_PACER_CLOCK_DIV_HIGH      0x0a            /* u16 */
+#define DB2K_REG_ACQ_TRIGGER_COUNT             0x0c            /* u16 */
+#define DB2K_REG_ACQ_RESULTS_FIFO              0x10            /* u16 */
+#define DB2K_REG_ACQ_RESULTS_SHADOW            0x14            /* u16 */
+#define DB2K_REG_ACQ_ADC_RESULT                        0x18            /* u16 */
+#define DB2K_REG_DAC_SCAN_COUNTER              0x1c            /* u16 */
+#define DB2K_REG_DAC_CONTROL                   0x20            /* u16 */
+#define DB2K_REG_DAC_FIFO                      0x24            /* s16 */
+#define DB2K_REG_DAC_PACER_CLOCK_DIV           0x2a            /* u16 */
+#define DB2K_REG_REF_DACS                      0x2c            /* u16 */
+#define DB2K_REG_DIO_CONTROL                   0x30            /* u16 */
+#define DB2K_REG_P3_HSIO_DATA                  0x32            /* s16 */
+#define DB2K_REG_P3_CONTROL                    0x34            /* u16 */
+#define DB2K_REG_CAL_EEPROM_CONTROL            0x36            /* u16 */
+#define DB2K_REG_DAC_SETTING(x)                        (0x38 + (x) * 2) /* s16 */
+#define DB2K_REG_DIO_P2_EXP_IO_8_BIT           0x40            /* s16 */
+#define DB2K_REG_COUNTER_TIMER_CONTROL         0x80            /* u16 */
+#define DB2K_REG_COUNTER_INPUT(x)              (0x88 + (x) * 2) /* s16 */
+#define DB2K_REG_TIMER_DIV(x)                  (0xa0 + (x) * 2) /* u16 */
+#define DB2K_REG_DMA_CONTROL                   0xb0            /* u16 */
+#define DB2K_REG_TRIG_CONTROL                  0xb2            /* u16 */
+#define DB2K_REG_CAL_EEPROM                    0xb8            /* u16 */
+#define DB2K_REG_ACQ_DIGITAL_MARK              0xba            /* u16 */
+#define DB2K_REG_TRIG_DACS                     0xbc            /* u16 */
+#define DB2K_REG_DIO_P2_EXP_IO_16_BIT(x)       (0xc0 + (x) * 2) /* s16 */
 
 /* Scan Sequencer programming */
 #define DAQBOARD2000_SeqStartScanList            0x0011
@@ -279,8 +279,9 @@ struct daqboard2000_private {
 
 static void writeAcqScanListEntry(struct comedi_device *dev, u16 entry)
 {
-       writew(entry & 0x00ff, dev->mmio + acqScanListFIFO);
-       writew((entry >> 8) & 0x00ff, dev->mmio + acqScanListFIFO);
+       writew(entry & 0x00ff, dev->mmio + DB2K_REG_ACQ_SCAN_LIST_FIFO);
+       writew((entry >> 8) & 0x00ff,
+              dev->mmio + DB2K_REG_ACQ_SCAN_LIST_FIFO);
 }
 
 static void setup_sampling(struct comedi_device *dev, int chan, int gain)
@@ -330,7 +331,7 @@ static int daqboard2000_ai_status(struct comedi_device *dev,
 {
        unsigned int status;
 
-       status = readw(dev->mmio + acqControl);
+       status = readw(dev->mmio + DB2K_REG_ACQ_CONTROL);
        if (status & context)
                return 0;
        return -EBUSY;
@@ -347,15 +348,16 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
 
        writew(DAQBOARD2000_AcqResetScanListFifo |
               DAQBOARD2000_AcqResetResultsFifo |
-              DAQBOARD2000_AcqResetConfigPipe, dev->mmio + acqControl);
+              DAQBOARD2000_AcqResetConfigPipe,
+              dev->mmio + DB2K_REG_ACQ_CONTROL);
 
        /*
         * If pacer clock is not set to some high value (> 10 us), we
         * risk multiple samples to be put into the result FIFO.
         */
        /* 1 second, should be long enough */
-       writel(1000000, dev->mmio + acqPacerClockDivLow);
-       writew(0, dev->mmio + acqPacerClockDivHigh);
+       writel(1000000, dev->mmio + DB2K_REG_ACQ_PACER_CLOCK_DIV_LOW);
+       writew(0, dev->mmio + DB2K_REG_ACQ_PACER_CLOCK_DIV_HIGH);
 
        gain = CR_RANGE(insn->chanspec);
        chan = CR_CHAN(insn->chanspec);
@@ -369,14 +371,16 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
        for (i = 0; i < insn->n; i++) {
                setup_sampling(dev, chan, gain);
                /* Enable reading from the scanlist FIFO */
-               writew(DAQBOARD2000_SeqStartScanList, dev->mmio + acqControl);
+               writew(DAQBOARD2000_SeqStartScanList,
+                      dev->mmio + DB2K_REG_ACQ_CONTROL);
 
                ret = comedi_timeout(dev, s, insn, daqboard2000_ai_status,
                                     DAQBOARD2000_AcqConfigPipeFull);
                if (ret)
                        return ret;
 
-               writew(DAQBOARD2000_AdcPacerEnable, dev->mmio + acqControl);
+               writew(DAQBOARD2000_AdcPacerEnable,
+                      dev->mmio + DB2K_REG_ACQ_CONTROL);
 
                ret = comedi_timeout(dev, s, insn, daqboard2000_ai_status,
                                     DAQBOARD2000_AcqLogicScanning);
@@ -388,9 +392,11 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
                if (ret)
                        return ret;
 
-               data[i] = readw(dev->mmio + acqResultsFIFO);
-               writew(DAQBOARD2000_AdcPacerDisable, dev->mmio + acqControl);
-               writew(DAQBOARD2000_SeqStopScanList, dev->mmio + acqControl);
+               data[i] = readw(dev->mmio + DB2K_REG_ACQ_RESULTS_FIFO);
+               writew(DAQBOARD2000_AdcPacerDisable,
+                      dev->mmio + DB2K_REG_ACQ_CONTROL);
+               writew(DAQBOARD2000_SeqStopScanList,
+                      dev->mmio + DB2K_REG_ACQ_CONTROL);
        }
 
        return i;
@@ -404,7 +410,7 @@ static int daqboard2000_ao_eoc(struct comedi_device *dev,
        unsigned int chan = CR_CHAN(insn->chanspec);
        unsigned int status;
 
-       status = readw(dev->mmio + dacControl);
+       status = readw(dev->mmio + DB2K_REG_DAC_CONTROL);
        if ((status & ((chan + 1) * 0x0010)) == 0)
                return 0;
        return -EBUSY;
@@ -422,7 +428,7 @@ static int daqboard2000_ao_insn_write(struct comedi_device *dev,
                unsigned int val = data[i];
                int ret;
 
-               writew(val, dev->mmio + dacSetting(chan));
+               writew(val, dev->mmio + DB2K_REG_DAC_SETTING(chan));
 
                ret = comedi_timeout(dev, s, insn, daqboard2000_ao_eoc, 0);
                if (ret)
@@ -550,18 +556,20 @@ static void daqboard2000_adcDisarm(struct comedi_device *dev)
        /* Disable hardware triggers */
        udelay(2);
        writew(DAQBOARD2000_TrigAnalog | DAQBOARD2000_TrigDisable,
-              dev->mmio + trigControl);
+              dev->mmio + DB2K_REG_TRIG_CONTROL);
        udelay(2);
        writew(DAQBOARD2000_TrigTTL | DAQBOARD2000_TrigDisable,
-              dev->mmio + trigControl);
+              dev->mmio + DB2K_REG_TRIG_CONTROL);
 
        /* Stop the scan list FIFO from loading the configuration pipe */
        udelay(2);
-       writew(DAQBOARD2000_SeqStopScanList, dev->mmio + acqControl);
+       writew(DAQBOARD2000_SeqStopScanList,
+              dev->mmio + DB2K_REG_ACQ_CONTROL);
 
        /* Stop the pacer clock */
        udelay(2);
-       writew(DAQBOARD2000_AdcPacerDisable, dev->mmio + acqControl);
+       writew(DAQBOARD2000_AdcPacerDisable,
+              dev->mmio + DB2K_REG_ACQ_CONTROL);
 
        /* Stop the input dma (abort channel 1) */
        daqboard2000_adcStopDmaTransfer(dev);
@@ -573,18 +581,20 @@ static void daqboard2000_activateReferenceDacs(struct comedi_device *dev)
        int timeout;
 
        /*  Set the + reference dac value in the FPGA */
-       writew(0x80 | DAQBOARD2000_PosRefDacSelect, dev->mmio + refDacs);
+       writew(0x80 | DAQBOARD2000_PosRefDacSelect,
+              dev->mmio + DB2K_REG_REF_DACS);
        for (timeout = 0; timeout < 20; timeout++) {
-               val = readw(dev->mmio + dacControl);
+               val = readw(dev->mmio + DB2K_REG_DAC_CONTROL);
                if ((val & DAQBOARD2000_RefBusy) == 0)
                        break;
                udelay(2);
        }
 
        /*  Set the - reference dac value in the FPGA */
-       writew(0x80 | DAQBOARD2000_NegRefDacSelect, dev->mmio + refDacs);
+       writew(0x80 | DAQBOARD2000_NegRefDacSelect,
+              dev->mmio + DB2K_REG_REF_DACS);
        for (timeout = 0; timeout < 20; timeout++) {
-               val = readw(dev->mmio + dacControl);
+               val = readw(dev->mmio + DB2K_REG_DAC_CONTROL);
                if ((val & DAQBOARD2000_RefBusy) == 0)
                        break;
                udelay(2);
@@ -711,7 +721,7 @@ static int daqboard2000_auto_attach(struct comedi_device *dev,
 
        s = &dev->subdevices[2];
        return subdev_8255_init(dev, s, daqboard2000_8255_cb,
-                               dioP2ExpansionIO8Bit);
+                               DB2K_REG_DIO_P2_EXP_IO_8_BIT);
 }
 
 static void daqboard2000_detach(struct comedi_device *dev)