serial: 8250_fintek: Add F81216 Support

Fintek F81216 is a LPC to 4 UARTs device. It's the F81216 series but
support less functional than F81216AD/F81216H

The following list is brief descriptions of F81216 series:

F81216H (0105)
	9Bit/High baud rate(not implements with mainline)
	RS485, 128Bytes FIFO (implemented)

F81216AD (0216)
	9Bit(not implements with mainline)
	RS485(implemented)

F81216 (0208)
	basically 16550A

Suggested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index e039a33e59e3b793eb20ac637a7dcf94d4e11392..523d873731be102beff4ddb15686e28e750b0f6f 100644 (file)
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -23,6 +23,7 @@
 #define CHIP_ID2  0x21
 #define CHIP_ID_F81216AD 0x1602
 #define CHIP_ID_F81216H 0x0501
+#define CHIP_ID_F81216 0x0802
 #define VENDOR_ID1 0x23
 #define VENDOR_ID1_VAL 0x19
 #define VENDOR_ID2 0x24
@@ -107,8 +108,14 @@ static int fintek_8250_check_id(struct fintek_8250 *pdata)
        chip = sio_read_reg(pdata, CHIP_ID1);
        chip |= sio_read_reg(pdata, CHIP_ID2) << 8;
 
-       if (chip != CHIP_ID_F81216AD && chip != CHIP_ID_F81216H)
+       switch (chip) {
+       case CHIP_ID_F81216AD:
+       case CHIP_ID_F81216H:
+       case CHIP_ID_F81216:
+               break;
+       default:
                return -ENODEV;
+       }
 
        pdata->pid = chip;
        return 0;
@@ -235,6 +242,21 @@ static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address,
        return -ENODEV;
 }
 
+static void fintek_8250_set_rs485_handler(struct uart_8250_port *uart)
+{
+       struct fintek_8250 *pdata = uart->port.private_data;
+
+       switch (pdata->pid) {
+       case CHIP_ID_F81216AD:
+       case CHIP_ID_F81216H:
+               uart->port.rs485_config = fintek_8250_rs485_config;
+               break;
+
+       default: /* No RS485 Auto direction functional */
+               break;
+       }
+}
+
 int fintek_8250_probe(struct uart_8250_port *uart)
 {
        struct fintek_8250 *pdata;
@@ -248,8 +270,8 @@ int fintek_8250_probe(struct uart_8250_port *uart)
                return -ENOMEM;
 
        memcpy(pdata, &probe_data, sizeof(probe_data));
-       uart->port.rs485_config = fintek_8250_rs485_config;
        uart->port.private_data = pdata;
+       fintek_8250_set_rs485_handler(uart);
 
        return 0;
 }