drm/i915: Reorganize the DSI enable/disable sequence
authorShobhit Kumar <shobhit.kumar@intel.com>
Wed, 11 Dec 2013 12:22:05 +0000 (17:52 +0530)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Wed, 11 Dec 2013 22:52:19 +0000 (23:52 +0100)
Basically ULPS handling during enable/disable has been moved to
pre_enable and post_disable phases. PLL and panel power disable
also has been moved to post_disable phase. The ULPS entry/exit
sequneces as suggested by HW team is as follows -

During enable time -
set DEVICE_READY --> Clear DEVICE_READY --> set DEVICE_READY

And during disable time to flush all FIFOs -
set ENTER_SLEEP --> EXIT_SLEEP --> ENTER_SLEEP

Also during disbale sequnece sub-encoder disable is moved to the end
after port is disabled.

v2: Based on comments from Ville
    - Detailed epxlaination in the commit messgae
    - Moved parameter changes out into another patch
    - Backlight enabling will be a new patch

v3: Updated as per Jani's comments
    - Removed the I915_WRITE_BITS as it is not needed
    - Moved panel_reset and send_otp_cmds hooks to dsi_pre_enable
    - Moved disable_panel_power hook to dsi_post_disable
    - Replace hardcoding with AFE_LATCHOUT

v4: Make intel_dsi_device_ready and intel_dsi_clear_device_ready static

Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_dsi.c
drivers/gpu/drm/i915/intel_dsi.h

index 1016e7b0337ef427759474661893f5895594479c..e9bcb46dba5fcc61154a4c91b4fb1a7438839540 100644 (file)
@@ -101,46 +101,57 @@ static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder)
        vlv_enable_dsi_pll(encoder);
 }
 
-static void intel_dsi_pre_enable(struct intel_encoder *encoder)
+static void intel_dsi_device_ready(struct intel_encoder *encoder)
 {
+       struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+       struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+       int pipe = intel_crtc->pipe;
+       u32 val;
+
        DRM_DEBUG_KMS("\n");
-}
 
-static void intel_dsi_enable(struct intel_encoder *encoder)
+       val = I915_READ(MIPI_PORT_CTRL(pipe));
+       I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD);
+       usleep_range(1000, 1500);
+       I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT);
+       usleep_range(2000, 2500);
+       I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY);
+       usleep_range(2000, 2500);
+       I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00);
+       usleep_range(2000, 2500);
+       I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY);
+       usleep_range(2000, 2500);
+}
+static void intel_dsi_pre_enable(struct intel_encoder *encoder)
 {
-       struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
-       struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
        struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
-       int pipe = intel_crtc->pipe;
-       u32 temp;
 
        DRM_DEBUG_KMS("\n");
 
        if (intel_dsi->dev.dev_ops->panel_reset)
                intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev);
 
-       temp = I915_READ(MIPI_DEVICE_READY(pipe));
-       if ((temp & DEVICE_READY) == 0) {
-               temp &= ~ULPS_STATE_MASK;
-               I915_WRITE(MIPI_DEVICE_READY(pipe), temp | DEVICE_READY);
-       } else if (temp & ULPS_STATE_MASK) {
-               temp &= ~ULPS_STATE_MASK;
-               I915_WRITE(MIPI_DEVICE_READY(pipe), temp | ULPS_STATE_EXIT);
-               /*
-                * We need to ensure that there is a minimum of 1 ms time
-                * available before clearing the UPLS exit state.
-                */
-               msleep(2);
-               I915_WRITE(MIPI_DEVICE_READY(pipe), temp);
-       }
+       /* put device in ready state */
+       intel_dsi_device_ready(encoder);
 
        if (intel_dsi->dev.dev_ops->send_otp_cmds)
                intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev);
+}
+
+static void intel_dsi_enable(struct intel_encoder *encoder)
+{
+       struct drm_device *dev = encoder->base.dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
+       struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+       struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+       int pipe = intel_crtc->pipe;
+       u32 temp;
+
+       DRM_DEBUG_KMS("\n");
 
        if (is_cmd_mode(intel_dsi))
                I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(pipe), 8 * 4);
-
-       if (is_vid_mode(intel_dsi)) {
+       else {
                msleep(20); /* XXX */
                dpi_send_cmd(intel_dsi, TURN_ON);
                msleep(100);
@@ -157,7 +168,8 @@ static void intel_dsi_enable(struct intel_encoder *encoder)
 
 static void intel_dsi_disable(struct intel_encoder *encoder)
 {
-       struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+       struct drm_device *dev = encoder->base.dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
        struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
        int pipe = intel_crtc->pipe;
@@ -165,8 +177,6 @@ static void intel_dsi_disable(struct intel_encoder *encoder)
 
        DRM_DEBUG_KMS("\n");
 
-       intel_dsi->dev.dev_ops->disable(&intel_dsi->dev);
-
        if (is_vid_mode(intel_dsi)) {
                dpi_send_cmd(intel_dsi, SHUTDOWN);
                msleep(10);
@@ -179,20 +189,54 @@ static void intel_dsi_disable(struct intel_encoder *encoder)
                msleep(2);
        }
 
-       temp = I915_READ(MIPI_DEVICE_READY(pipe));
-       if (temp & DEVICE_READY) {
-               temp &= ~DEVICE_READY;
-               temp &= ~ULPS_STATE_MASK;
-               I915_WRITE(MIPI_DEVICE_READY(pipe), temp);
-       }
+       /* if disable packets are sent before sending shutdown packet then in
+        * some next enable sequence send turn on packet error is observed */
+       if (intel_dsi->dev.dev_ops->disable)
+               intel_dsi->dev.dev_ops->disable(&intel_dsi->dev);
 }
 
-static void intel_dsi_post_disable(struct intel_encoder *encoder)
+static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
 {
+       struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+       struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+       int pipe = intel_crtc->pipe;
+       u32 val;
+
        DRM_DEBUG_KMS("\n");
 
+       I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER);
+       usleep_range(2000, 2500);
+
+       I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT);
+       usleep_range(2000, 2500);
+
+       I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER);
+       usleep_range(2000, 2500);
+
+       val = I915_READ(MIPI_PORT_CTRL(pipe));
+       I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD);
+       usleep_range(1000, 1500);
+
+       if (wait_for(((I915_READ(MIPI_PORT_CTRL(pipe)) & AFE_LATCHOUT)
+                                       == 0x00000), 30))
+               DRM_ERROR("DSI LP not going Low\n");
+
+       I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00);
+       usleep_range(2000, 2500);
+
        vlv_disable_dsi_pll(encoder);
 }
+static void intel_dsi_post_disable(struct intel_encoder *encoder)
+{
+       struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+
+       DRM_DEBUG_KMS("\n");
+
+       intel_dsi_clear_device_ready(encoder);
+
+       if (intel_dsi->dev.dev_ops->disable_panel_power)
+               intel_dsi->dev.dev_ops->disable_panel_power(&intel_dsi->dev);
+}
 
 static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
                                   enum pipe *pipe)
index 14509d65f78d7becd83e95b9f859efc2c6ea7231..387dfe13cd9bd7a4795e3476f141389b45645c84 100644 (file)
@@ -41,6 +41,8 @@ struct intel_dsi_dev_ops {
 
        void (*panel_reset)(struct intel_dsi_device *dsi);
 
+       void (*disable_panel_power)(struct intel_dsi_device *dsi);
+
        /* one time programmable commands if needed */
        void (*send_otp_cmds)(struct intel_dsi_device *dsi);