system control coprocessor. Documentation from ARM can be found
at http://infocenter.arm.com, search for "TCM Status Register"
to see documents for all CPUs. Reading this register you can
-determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
-machine.
+determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present
+in the machine.
There is further a TCM region register (search for "TCM Region
Registers" at the ARM site) that can report and modify the location
the MMU, but notice that the TCM if often used in situations where
the MMU is turned off. To avoid confusion the current Linux
implementation will map the TCM 1 to 1 from physical to virtual
-memory in the location specified by the machine.
+memory in the location specified by the kernel. Currently Linux
+will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and
+on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM.
+
+Newer versions of the region registers also support dividing these
+TCMs in two separate banks, so for example an 8KiB ITCM is divided
+into two 4KiB banks with its own control registers. The idea is to
+be able to lock and hide one of the banks for use by the secure
+world (TrustZone).
TCM is used for a few things:
memory. Such a heap is great for things like saving
device state when shutting off device power domains.
-A machine that has TCM memory shall select HAVE_TCM in
-arch/arm/Kconfig for itself, and then the
-rest of the functionality will depend on the physical
-location and size of ITCM and DTCM to be defined in
-mach/memory.h for the machine. Code that needs to use
-TCM shall #include <asm/tcm.h> If the TCM is not located
-at the place given in memory.h it will be moved using
-the TCM Region registers.
+A machine that has TCM memory shall select HAVE_TCM from
+arch/arm/Kconfig for itself. Code that needs to use TCM shall
+#include <asm/tcm.h>
Functions to go into itcm can be tagged like this:
int __tcmfunc foo(int bar);
+Since these are marked to become long_calls and you may want
+to have functions called locally inside the TCM without
+wasting space, there is also the __tcmlocalfunc prefix that
+will make the call relative.
+
Variables to go into dtcm can be tagged like this:
int __tcmdata foo;
#include <mach/memory.h>
#include "tcm.h"
-/* Scream and warn about misuse */
-#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \
- !defined(DTCM_OFFSET) || !defined(DTCM_END)
-#error "TCM support selected but offsets not defined!"
-#endif
-
static struct gen_pool *tcm_pool;
/* TCM section definitions from the linker */
extern char __itcm_start, __sitcm_text, __eitcm_text;
extern char __dtcm_start, __sdtcm_data, __edtcm_data;
+/* These will be increased as we run */
+u32 dtcm_end = DTCM_OFFSET;
+u32 itcm_end = ITCM_OFFSET;
+
/*
* TCM memory resources
*/
static struct resource dtcm_res = {
.name = "DTCM RAM",
.start = DTCM_OFFSET,
- .end = DTCM_END,
+ .end = DTCM_OFFSET,
.flags = IORESOURCE_MEM
};
static struct resource itcm_res = {
.name = "ITCM RAM",
.start = ITCM_OFFSET,
- .end = ITCM_END,
+ .end = ITCM_OFFSET,
.flags = IORESOURCE_MEM
};
{
.virtual = DTCM_OFFSET,
.pfn = __phys_to_pfn(DTCM_OFFSET),
- .length = (DTCM_END - DTCM_OFFSET + 1),
+ .length = 0,
.type = MT_MEMORY_DTCM
}
};
{
.virtual = ITCM_OFFSET,
.pfn = __phys_to_pfn(ITCM_OFFSET),
- .length = (ITCM_END - ITCM_OFFSET + 1),
+ .length = 0,
.type = MT_MEMORY_ITCM
}
};
}
EXPORT_SYMBOL(tcm_free);
-static void __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
- u32 offset, u32 expected_size)
+static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
+ u32 *offset)
{
const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128,
256, 512, 1024, -1, -1, -1, -1 };
tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f];
if (tcm_size < 0) {
- pr_err("CPU: %sTCM%d of unknown size!\n",
+ pr_err("CPU: %sTCM%d of unknown size\n",
type ? "I" : "D", bank);
+ return -EINVAL;
+ } else if (tcm_size > 32) {
+ pr_err("CPU: %sTCM%d larger than 32k found\n",
+ type ? "I" : "D", bank);
+ return -EINVAL;
} else {
pr_info("CPU: found %sTCM%d %dk @ %08x, %senabled\n",
type ? "I" : "D",
(tcm_region & 1) ? "" : "not ");
}
- if (tcm_size != (expected_size >> 10)) {
- pr_crit("CPU: %sTCM%d was detected %dk but expected %dk!\n",
- type ? "I" : "D",
- bank,
- tcm_size,
- (expected_size >> 10));
- /* Adjust to the expected size? what can we do... */
- }
-
/* Force move the TCM bank to where we want it, enable */
- tcm_region = offset | (tcm_region & 0x00000ffeU) | 1;
+ tcm_region = *offset | (tcm_region & 0x00000ffeU) | 1;
if (!type)
asm("mcr p15, 0, %0, c9, c1, 0"
: /* No output operands */
: "r" (tcm_region));
+ /* Increase offset */
+ *offset += (tcm_size << 10);
+
pr_info("CPU: moved %sTCM%d %dk to %08x, enabled\n",
type ? "I" : "D",
bank,
tcm_size,
(tcm_region & 0xfffff000U));
+ return 0;
}
-/* We expect to find what is configured for the platform */
-#define DTCM_EXPECTED (DTCM_END - DTCM_OFFSET + 1)
-#define ITCM_EXPECTED (ITCM_END - ITCM_OFFSET + 1)
-
/*
* This initializes the TCM memory
*/
{
u32 tcm_status = read_cpuid_tcmstatus();
u8 dtcm_banks = (tcm_status >> 16) & 0x03;
- u32 dtcm_banksize = DTCM_EXPECTED / dtcm_banks;
u8 itcm_banks = (tcm_status & 0x03);
- u32 itcm_banksize = ITCM_EXPECTED / itcm_banks;
char *start;
char *end;
char *ram;
+ int ret;
int i;
/* Setup DTCM if present */
- for (i = 0; i < dtcm_banks; i++) {
- setup_tcm_bank(0, i, dtcm_banks,
- DTCM_OFFSET + (i * dtcm_banksize),
- dtcm_banksize);
+ if (dtcm_banks > 0) {
+ for (i = 0; i < dtcm_banks; i++) {
+ ret = setup_tcm_bank(0, i, dtcm_banks, &dtcm_end);
+ if (ret)
+ return;
+ }
+ dtcm_res.end = dtcm_end - 1;
request_resource(&iomem_resource, &dtcm_res);
+ dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET;
iotable_init(dtcm_iomap, 1);
/* Copy data from RAM to DTCM */
start = &__sdtcm_data;
end = &__edtcm_data;
ram = &__dtcm_start;
+ /* This means you compiled more code than fits into DTCM */
+ BUG_ON((end - start) > (dtcm_end - DTCM_OFFSET));
memcpy(start, ram, (end-start));
pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
}
/* Setup ITCM if present */
- for (i = 0; i < itcm_banks; i++) {
- setup_tcm_bank(1, i, itcm_banks,
- ITCM_OFFSET + (i * itcm_banksize),
- itcm_banksize);
+ if (itcm_banks > 0) {
+ for (i = 0; i < itcm_banks; i++) {
+ ret = setup_tcm_bank(1, i, itcm_banks, &itcm_end);
+ if (ret)
+ return;
+ }
+ itcm_res.end = itcm_end - 1;
request_resource(&iomem_resource, &itcm_res);
+ itcm_iomap[0].length = itcm_end - ITCM_OFFSET;
iotable_init(itcm_iomap, 1);
/* Copy code from RAM to ITCM */
start = &__sitcm_text;
end = &__eitcm_text;
ram = &__itcm_start;
+ /* This means you compiled more code than fits into ITCM */
+ BUG_ON((end - start) > (itcm_end - ITCM_OFFSET));
memcpy(start, ram, (end-start));
pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
}
/* Add the rest of DTCM to the TCM pool */
if (tcm_status & (0x03 << 16)) {
- if (dtcm_pool_start < DTCM_END) {
+ if (dtcm_pool_start < dtcm_end) {
ret = gen_pool_add(tcm_pool, dtcm_pool_start,
- DTCM_END - dtcm_pool_start + 1, -1);
+ dtcm_end - dtcm_pool_start, -1);
if (ret) {
pr_err("CPU DTCM: could not add DTCM " \
"remainder to pool!\n");
}
pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \
"the TCM memory pool\n",
- DTCM_END - dtcm_pool_start + 1,
+ dtcm_end - dtcm_pool_start,
dtcm_pool_start);
}
}
/* Add the rest of ITCM to the TCM pool */
if (tcm_status & 0x03) {
- if (itcm_pool_start < ITCM_END) {
+ if (itcm_pool_start < itcm_end) {
ret = gen_pool_add(tcm_pool, itcm_pool_start,
- ITCM_END - itcm_pool_start + 1, -1);
+ itcm_end - itcm_pool_start, -1);
if (ret) {
pr_err("CPU ITCM: could not add ITCM " \
"remainder to pool!\n");
}
pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \
"the TCM memory pool\n",
- ITCM_END - itcm_pool_start + 1,
+ itcm_end - itcm_pool_start,
itcm_pool_start);
}
}
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff