ARM: dts: NSP: Add PCI support

Add PCI support to the Northstar Plus SoC.  This uses the existing
pcie-iproc driver.  So, all that is needed is device tree entries in the
DTS.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 58aca277e4a7e6ba8411524c5120ac02afda3459..85fb1c8a24212ad21e6f0fb9083f2dfde14da395 100644 (file)
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -96,7 +96,7 @@
 
        axi {
                compatible = "simple-bus";
-               ranges = <0x00000000 0x18000000 0x00001000>;
+               ranges = <0x00000000 0x18000000 0x00015000>;
                #address-cells = <1>;
                #size-cells = <1>;
 
@@ -115,5 +115,77 @@
                        clock-frequency = <62499840>;
                        status = "disabled";
                };
+
+               pcie0: pcie@18012000 {
+                       compatible = "brcm,iproc-pcie";
+                       reg = <0x12000 0x1000>;
+
+                       #interrupt-cells = <1>;
+                       interrupt-map-mask = <0 0 0 0>;
+                       interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
+
+                       linux,pci-domain = <0>;
+
+                       bus-range = <0x00 0xff>;
+
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       device_type = "pci";
+
+                       /* Note: The HW does not support I/O resources.  So,
+                        * only the memory resource range is being specified.
+                        */
+                       ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+                       status = "disabled";
+               };
+
+               pcie1: pcie@18013000 {
+                       compatible = "brcm,iproc-pcie";
+                       reg = <0x13000 0x1000>;
+
+                       #interrupt-cells = <1>;
+                       interrupt-map-mask = <0 0 0 0>;
+                       interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
+
+                       linux,pci-domain = <1>;
+
+                       bus-range = <0x00 0xff>;
+
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       device_type = "pci";
+
+                       /* Note: The HW does not support I/O resources.  So,
+                        * only the memory resource range is being specified.
+                        */
+                       ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+                       status = "disabled";
+               };
+
+               pcie2: pcie@18014000 {
+                       compatible = "brcm,iproc-pcie";
+                       reg = <0x14000 0x1000>;
+
+                       #interrupt-cells = <1>;
+                       interrupt-map-mask = <0 0 0 0>;
+                       interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
+
+                       linux,pci-domain = <2>;
+
+                       bus-range = <0x00 0xff>;
+
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       device_type = "pci";
+
+                       /* Note: The HW does not support I/O resources.  So,
+                        * only the memory resource range is being specified.
+                        */
+                       ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
+
+                       status = "disabled";
+               };
        };
 };

diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 16303dbd35df3d0ce0a5238a1e8c303c4d225df1..48592687cfeb5eca42f7f3a6a0af954f0e0d2951 100644 (file)
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -55,3 +55,15 @@
 &uart1 {
        status = "okay";
 };
+
+&pcie0 {
+       status = "okay";
+};
+
+&pcie1 {
+       status = "okay";
+};
+
+&pcie2 {
+       status = "okay";
+};