ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals.

On n900 uart1 pins are not not used for uart, instead they are
used to connect to a cell modem over ssi. Looks like we're
currently missing these signal names for 3430 for some reason,
and only have some of them listed for 3630. Obviously the signals
are there for 3430 if n900 is using them and they are documented
in some TRMs.

Note that these will eventually be replaced by device tree
based pinctrl-single.c driver. But for now these are needed
to verify the SSI pins for devices like Nokia N900.

Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 17f80e4ab162e4f2d4f15f8d99ccfa03496e225b..c47140bbbec4d8a5243110a68703d2861a7f3cb0 100644 (file)
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -614,16 +614,16 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
                "sys_off_mode", NULL, NULL, NULL,
                "gpio_9", NULL, NULL, "safe_mode"),
        _OMAP3_MUXENTRY(UART1_CTS, 150,
-               "uart1_cts", NULL, NULL, NULL,
+               "uart1_cts", "ssi1_rdy_tx", NULL, NULL,
                "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
        _OMAP3_MUXENTRY(UART1_RTS, 149,
-               "uart1_rts", NULL, NULL, NULL,
+               "uart1_rts", "ssi1_flag_tx", NULL, NULL,
                "gpio_149", NULL, NULL, "safe_mode"),
        _OMAP3_MUXENTRY(UART1_RX, 151,
-               "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk",
+               "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
                "gpio_151", NULL, NULL, "safe_mode"),
        _OMAP3_MUXENTRY(UART1_TX, 148,
-               "uart1_tx", NULL, NULL, NULL,
+               "uart1_tx", "ssi1_dat_tx", NULL, NULL,
                "gpio_148", NULL, NULL, "safe_mode"),
        _OMAP3_MUXENTRY(UART2_CTS, 144,
                "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,