rtc: add driver for BQ32000 I2C RTC
authorPiotr Ziecik <kosmo@semihalf.com>
Wed, 16 Dec 2009 00:46:12 +0000 (16:46 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Wed, 16 Dec 2009 15:20:00 +0000 (07:20 -0800)
This patch adds basic support for Texas Instruments BQ32000 I2C RTC.  Only
time reading/writing is implemented.  Advanced features, such as trickle
charger and crystal calibration are not supported.

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/rtc/Kconfig
drivers/rtc/Makefile
drivers/rtc/rtc-bq32k.c [new file with mode: 0644]

index 9930d79fa51fb396a4e52584f691306a5049782d..40c168bf69847914aa4b3d5f7e8b06d5641e2e0b 100644 (file)
@@ -242,6 +242,15 @@ config RTC_DRV_M41T80_WDT
          If you say Y here you will get support for the
          watchdog timer in the ST M41T60 and M41T80 RTC chips series.
 
+config RTC_DRV_BQ32K
+       tristate "TI BQ32000"
+       help
+         If you say Y here you will get support for the TI
+         BQ32000 I2C RTC chip.
+
+         This driver can also be built as a module. If so, the module
+         will be called rtc-bq32k.
+
 config RTC_DRV_DM355EVM
        tristate "TI DaVinci DM355 EVM RTC"
        depends on MFD_DM355EVM_MSP
index 6fa20f4ac3f1046a2fd1826e5cf08ff15a26a875..52f5f3c3b8e0e6aaece82c5fde16f3c1775d3d55 100644 (file)
@@ -23,6 +23,7 @@ obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
 obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
 obj-$(CONFIG_RTC_DRV_AU1XXX)   += rtc-au1xxx.o
 obj-$(CONFIG_RTC_DRV_BFIN)     += rtc-bfin.o
+obj-$(CONFIG_RTC_DRV_BQ32K)    += rtc-bq32k.o
 obj-$(CONFIG_RTC_DRV_BQ4802)   += rtc-bq4802.o
 obj-$(CONFIG_RTC_DRV_CMOS)     += rtc-cmos.o
 obj-$(CONFIG_RTC_DRV_COH901331)        += rtc-coh901331.o
diff --git a/drivers/rtc/rtc-bq32k.c b/drivers/rtc/rtc-bq32k.c
new file mode 100644 (file)
index 0000000..408cc8f
--- /dev/null
@@ -0,0 +1,204 @@
+/*
+ * Driver for TI BQ32000 RTC.
+ *
+ * Copyright (C) 2009 Semihalf.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/bcd.h>
+
+#define BQ32K_SECONDS          0x00    /* Seconds register address */
+#define BQ32K_SECONDS_MASK     0x7F    /* Mask over seconds value */
+#define BQ32K_STOP             0x80    /* Oscillator Stop flat */
+
+#define BQ32K_MINUTES          0x01    /* Minutes register address */
+#define BQ32K_MINUTES_MASK     0x7F    /* Mask over minutes value */
+#define BQ32K_OF               0x80    /* Oscillator Failure flag */
+
+#define BQ32K_HOURS_MASK       0x3F    /* Mask over hours value */
+#define BQ32K_CENT             0x40    /* Century flag */
+#define BQ32K_CENT_EN          0x80    /* Century flag enable bit */
+
+struct bq32k_regs {
+       uint8_t         seconds;
+       uint8_t         minutes;
+       uint8_t         cent_hours;
+       uint8_t         day;
+       uint8_t         date;
+       uint8_t         month;
+       uint8_t         years;
+};
+
+static struct i2c_driver bq32k_driver;
+
+static int bq32k_read(struct device *dev, void *data, uint8_t off, uint8_t len)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct i2c_msg msgs[] = {
+               {
+                       .addr = client->addr,
+                       .flags = 0,
+                       .len = 1,
+                       .buf = &off,
+               }, {
+                       .addr = client->addr,
+                       .flags = I2C_M_RD,
+                       .len = len,
+                       .buf = data,
+               }
+       };
+
+       if (i2c_transfer(client->adapter, msgs, 2) == 2)
+               return 0;
+
+       return -EIO;
+}
+
+static int bq32k_write(struct device *dev, void *data, uint8_t off, uint8_t len)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       uint8_t buffer[len + 1];
+
+       buffer[0] = off;
+       memcpy(&buffer[1], data, len);
+
+       if (i2c_master_send(client, buffer, len + 1) == len + 1)
+               return 0;
+
+       return -EIO;
+}
+
+static int bq32k_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+       struct bq32k_regs regs;
+       int error;
+
+       error = bq32k_read(dev, &regs, 0, sizeof(regs));
+       if (error)
+               return error;
+
+       tm->tm_sec = bcd2bin(regs.seconds & BQ32K_SECONDS_MASK);
+       tm->tm_min = bcd2bin(regs.minutes & BQ32K_SECONDS_MASK);
+       tm->tm_hour = bcd2bin(regs.cent_hours & BQ32K_HOURS_MASK);
+       tm->tm_mday = bcd2bin(regs.date);
+       tm->tm_wday = bcd2bin(regs.day) - 1;
+       tm->tm_mon = bcd2bin(regs.month) - 1;
+       tm->tm_year = bcd2bin(regs.years) +
+                               ((regs.cent_hours & BQ32K_CENT) ? 100 : 0);
+
+       return rtc_valid_tm(tm);
+}
+
+static int bq32k_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+       struct bq32k_regs regs;
+
+       regs.seconds = bin2bcd(tm->tm_sec);
+       regs.minutes = bin2bcd(tm->tm_min);
+       regs.cent_hours = bin2bcd(tm->tm_hour) | BQ32K_CENT_EN;
+       regs.day = bin2bcd(tm->tm_wday + 1);
+       regs.date = bin2bcd(tm->tm_mday);
+       regs.month = bin2bcd(tm->tm_mon + 1);
+
+       if (tm->tm_year >= 100) {
+               regs.cent_hours |= BQ32K_CENT;
+               regs.years = bin2bcd(tm->tm_year - 100);
+       } else
+               regs.years = bin2bcd(tm->tm_year);
+
+       return bq32k_write(dev, &regs, 0, sizeof(regs));
+}
+
+static const struct rtc_class_ops bq32k_rtc_ops = {
+       .read_time      = bq32k_rtc_read_time,
+       .set_time       = bq32k_rtc_set_time,
+};
+
+static int bq32k_probe(struct i2c_client *client,
+                               const struct i2c_device_id *id)
+{
+       struct device *dev = &client->dev;
+       struct rtc_device *rtc;
+       uint8_t reg;
+       int error;
+
+       if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+               return -ENODEV;
+
+       /* Check Oscillator Stop flag */
+       error = bq32k_read(dev, &reg, BQ32K_SECONDS, 1);
+       if (!error && (reg & BQ32K_STOP)) {
+               dev_warn(dev, "Oscillator was halted. Restarting...\n");
+               reg &= ~BQ32K_STOP;
+               error = bq32k_write(dev, &reg, BQ32K_SECONDS, 1);
+       }
+       if (error)
+               return error;
+
+       /* Check Oscillator Failure flag */
+       error = bq32k_read(dev, &reg, BQ32K_MINUTES, 1);
+       if (!error && (reg & BQ32K_OF)) {
+               dev_warn(dev, "Oscillator Failure. Check RTC battery.\n");
+               reg &= ~BQ32K_OF;
+               error = bq32k_write(dev, &reg, BQ32K_MINUTES, 1);
+       }
+       if (error)
+               return error;
+
+       rtc = rtc_device_register(bq32k_driver.driver.name, &client->dev,
+                                               &bq32k_rtc_ops, THIS_MODULE);
+       if (IS_ERR(rtc))
+               return PTR_ERR(rtc);
+
+       i2c_set_clientdata(client, rtc);
+
+       return 0;
+}
+
+static int __devexit bq32k_remove(struct i2c_client *client)
+{
+       struct rtc_device *rtc = i2c_get_clientdata(client);
+
+       rtc_device_unregister(rtc);
+       return 0;
+}
+
+static const struct i2c_device_id bq32k_id[] = {
+       { "bq32000", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, bq32k_id);
+
+static struct i2c_driver bq32k_driver = {
+       .driver = {
+               .name   = "bq32k",
+               .owner  = THIS_MODULE,
+       },
+       .probe          = bq32k_probe,
+       .remove         = __devexit_p(bq32k_remove),
+       .id_table       = bq32k_id,
+};
+
+static __init int bq32k_init(void)
+{
+       return i2c_add_driver(&bq32k_driver);
+}
+module_init(bq32k_init);
+
+static __exit void bq32k_exit(void)
+{
+       i2c_del_driver(&bq32k_driver);
+}
+module_exit(bq32k_exit);
+
+MODULE_AUTHOR("Semihalf, Piotr Ziecik <kosmo@semihalf.com>");
+MODULE_DESCRIPTION("TI BQ32000 I2C RTC driver");
+MODULE_LICENSE("GPL");