V4L/DVB (11022): zoran/bt819: use new notify functionality.
authorHans Verkuil <hverkuil@xs4all.nl>
Sun, 8 Mar 2009 20:04:38 +0000 (17:04 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Mon, 30 Mar 2009 15:43:21 +0000 (12:43 -0300)
Bt819 needs the parent driver to drive a GPIO pin low and high in order to
reset its fifo. Use the new notify callback for this.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/bt819.c
drivers/media/video/zoran/zoran_card.c
drivers/media/video/zoran/zoran_device.c
drivers/media/video/zoran/zoran_device.h
drivers/media/video/zoran/zoran_driver.c
include/media/bt819.h [new file with mode: 0644]

index e0d8e2b186d185ea2f3da1b754f6ff12d3830693..217294d56414be4c1b88c94545edeaef05860ab6 100644 (file)
 #include <linux/types.h>
 #include <linux/ioctl.h>
 #include <linux/delay.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv.h>
+#include <media/bt819.h>
 
 MODULE_DESCRIPTION("Brooktree-819 video decoder driver");
 MODULE_AUTHOR("Mike Bernson & Dave Perks");
@@ -250,7 +251,11 @@ static int bt819_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 
        v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std);
 
+       if (sd->v4l2_dev == NULL || sd->v4l2_dev->notify == NULL)
+               v4l2_err(sd, "no notify found!\n");
+
        if (std & V4L2_STD_NTSC) {
+               v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, 0);
                bt819_setbit(decoder, 0x01, 0, 1);
                bt819_setbit(decoder, 0x01, 1, 0);
                bt819_setbit(decoder, 0x01, 5, 0);
@@ -259,6 +264,7 @@ static int bt819_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
                /* bt819_setbit(decoder, 0x1a,  5, 1); */
                timing = &timing_data[1];
        } else if (std & V4L2_STD_PAL) {
+               v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, 0);
                bt819_setbit(decoder, 0x01, 0, 1);
                bt819_setbit(decoder, 0x01, 1, 1);
                bt819_setbit(decoder, 0x01, 5, 1);
@@ -283,6 +289,7 @@ static int bt819_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
        bt819_write(decoder, 0x08, (timing->hscale >> 8) & 0xff);
        bt819_write(decoder, 0x09, timing->hscale & 0xff);
        decoder->norm = std;
+       v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, 0);
        return 0;
 }
 
@@ -295,7 +302,11 @@ static int bt819_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *ro
        if (route->input < 0 || route->input > 7)
                return -EINVAL;
 
+       if (sd->v4l2_dev == NULL || sd->v4l2_dev->notify == NULL)
+               v4l2_err(sd, "no notify found!\n");
+
        if (decoder->input != route->input) {
+               v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, 0);
                decoder->input = route->input;
                /* select mode */
                if (decoder->input == 0) {
@@ -305,6 +316,7 @@ static int bt819_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *ro
                        bt819_setbit(decoder, 0x0b, 6, 1);
                        bt819_setbit(decoder, 0x1a, 1, 0);
                }
+               v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, 0);
        }
        return 0;
 }
index b5d228d91b06416fad4aa0cfe222aa103212cf09..ec9b6ef560902ebd455ff486aa1cbcf6e98e71e0 100644 (file)
@@ -39,7 +39,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/videodev2.h>
-#include <media/v4l2-common.h>
 #include <linux/spinlock.h>
 #include <linux/sem.h>
 #include <linux/kmod.h>
@@ -48,8 +47,9 @@
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
+#include <media/v4l2-common.h>
+#include <media/bt819.h>
 
 #include "videocodec.h"
 #include "zoran.h"
@@ -1196,6 +1196,19 @@ zoran_setup_videocodec (struct zoran *zr,
        return m;
 }
 
+static int zoran_subdev_notify(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+       struct zoran *zr = to_zoran(sd->v4l2_dev);
+
+       /* Bt819 needs to reset its FIFO buffer using #FRST pin and
+          LML33 card uses GPIO(7) for that. */
+       if (cmd == BT819_FIFO_RESET_LOW)
+               GPIO(zr, 7, 0);
+       else if (cmd == BT819_FIFO_RESET_HIGH)
+               GPIO(zr, 7, 1);
+       return 0;
+}
+
 /*
  *   Scan for a Buz card (actually for the PCI controller ZR36057),
  *   request the irq and map the io memory
@@ -1226,6 +1239,7 @@ static int __devinit zoran_probe(struct pci_dev *pdev,
                        ZORAN_NAME, __func__);
                return -ENOMEM;
        }
+       zr->v4l2_dev.notify = zoran_subdev_notify;
        if (v4l2_device_register(&pdev->dev, &zr->v4l2_dev))
                goto zr_free_mem;
        zr->pci_dev = pdev;
index f8bcd1a248c29c56b2dcdfb8a2fca0c7736d1840..e0223deed35edfc268917b5c22976ad25be1d1cb 100644 (file)
@@ -1584,8 +1584,8 @@ zoran_init_hardware (struct zoran *zr)
        route.input = zr->card.input[zr->input].muxsel;
 
        decoder_call(zr, core, init, 0);
-       decoder_s_std(zr, zr->norm);
-       decoder_s_routing(zr, &route);
+       decoder_call(zr, tuner, s_std, zr->norm);
+       decoder_call(zr, video, s_routing, &route);
 
        encoder_call(zr, core, init, 0);
        encoder_call(zr, video, s_std_output, zr->norm);
@@ -1650,35 +1650,3 @@ zr36057_init_vfe (struct zoran *zr)
                reg |= ZR36057_VDCR_Triton;
        btwrite(reg, ZR36057_VDCR);
 }
-
-/*
- * Interface to decoder and encoder chips using i2c bus
- */
-
-int decoder_s_std(struct zoran *zr, v4l2_std_id std)
-{
-       int res;
-
-       /* Bt819 needs to reset its FIFO buffer using #FRST pin and
-          LML33 card uses GPIO(7) for that. */
-       if (zr->card.type == LML33)
-               GPIO(zr, 7, 0);
-       res = decoder_call(zr, tuner, s_std, std);
-       if (zr->card.type == LML33)
-               GPIO(zr, 7, 1); /* Pull #FRST high. */
-       return res;
-}
-
-int decoder_s_routing(struct zoran *zr, struct v4l2_routing *route)
-{
-       int res;
-
-       /* Bt819 needs to reset its FIFO buffer using #FRST pin and
-          LML33 card uses GPIO(7) for that. */
-       if (zr->card.type == LML33)
-               GPIO(zr, 7, 0);
-       res = decoder_call(zr, video, s_routing, route);
-       if (zr->card.type == LML33)
-               GPIO(zr, 7, 1); /* Pull #FRST high. */
-       return res;
-}
index 85414e17524e0bff7b5a9c402b82e393b285f529..07f2c23ff7401a3b5e6653f0133477939c4ca2a3 100644 (file)
@@ -92,7 +92,4 @@ extern int pass_through;
 #define encoder_call(zr, o, f, args...) \
        v4l2_subdev_call(zr->encoder, o, f, ##args)
 
-int decoder_s_std(struct zoran *zr, v4l2_std_id std);
-int decoder_s_routing(struct zoran *zr, struct v4l2_routing *route);
-
 #endif                         /* __ZORAN_DEVICE_H__ */
index 60501f256b2854eb008b6628e105baeb8a225834..1e87fb9f71466e93905ff8fed7f30dfccea05023 100644 (file)
@@ -1449,7 +1449,7 @@ zoran_set_norm (struct zoran *zr,
                v4l2_std_id std = 0;
 
                decoder_call(zr, video, querystd, &std);
-               decoder_s_std(zr, std);
+               decoder_call(zr, tuner, s_std, std);
 
                /* let changes come into effect */
                ssleep(2);
@@ -1461,7 +1461,7 @@ zoran_set_norm (struct zoran *zr,
                                "%s: %s - no norm detected\n",
                                ZR_DEVNAME(zr), __func__);
                        /* reset norm */
-                       decoder_s_std(zr, zr->norm);
+                       decoder_call(zr, tuner, s_std, zr->norm);
                        return -EIO;
                }
 
@@ -1480,7 +1480,7 @@ zoran_set_norm (struct zoran *zr,
        if (on)
                zr36057_overlay(zr, 0);
 
-       decoder_s_std(zr, norm);
+       decoder_call(zr, tuner, s_std, norm);
        encoder_call(zr, video, s_std_output, norm);
 
        if (on)
@@ -1522,7 +1522,7 @@ zoran_set_input (struct zoran *zr,
        route.input = zr->card.input[input].muxsel;
        zr->input = input;
 
-       decoder_s_routing(zr, &route);
+       decoder_call(zr, video, s_routing, &route);
 
        return 0;
 }
@@ -1775,7 +1775,7 @@ jpgreqbuf_unlock_and_return:
                        goto gstat_unlock_and_return;
                }
 
-               decoder_s_routing(zr, &route);
+               decoder_call(zr, video, s_routing, &route);
 
                /* sleep 1 second */
                ssleep(1);
@@ -1786,7 +1786,7 @@ jpgreqbuf_unlock_and_return:
 
                /* restore previous input and norm */
                route.input = zr->card.input[zr->input].muxsel;
-               decoder_s_routing(zr, &route);
+               decoder_call(zr, video, s_routing, &route);
 gstat_unlock_and_return:
                mutex_unlock(&zr->resource_lock);
 
diff --git a/include/media/bt819.h b/include/media/bt819.h
new file mode 100644 (file)
index 0000000..38f666b
--- /dev/null
@@ -0,0 +1,33 @@
+/*
+    bt819.h - bt819 notifications
+
+    Copyright (C) 2009 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _BT819_H_
+#define _BT819_H_
+
+#include <linux/ioctl.h>
+
+/* v4l2_device notifications. */
+
+/* Needed to reset the FIFO buffer when changing the input
+   or the video standard. */
+#define BT819_FIFO_RESET_LOW   _IO('b', 0)
+#define BT819_FIFO_RESET_HIGH  _IO('b', 1)
+
+#endif