ARM: dts: imx7d: Invert legacy PCI irq mapping

According to i.MX7D reference manual (Rev. 0.1, table 7-1, page 1221)
legacy PCI interrupt mapping is as follows:

 - PCIE INT A is IRQ 122
 - PCIE INT B is IRQ 123
 - PCIE INT C is IRQ 124
 - PCIE INT D is IRQ 125

Invert the mapping information in corresponding DT node to reflect
that.

Cc: yurovsky@gmail.com
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Fixes: a816d5750edf ("ARM: dts: imx7d: Add node for PCIe controller")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index f46814a7ea44100ff0dbd44f054bb17ed6c9d740..4d308d17f040c71157db72a8d81abf8de9dd4d8e 100644 (file)
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -144,10 +144,10 @@
                interrupt-names = "msi";
                #interrupt-cells = <1>;
                interrupt-map-mask = <0 0 0 0x7>;
-               interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-                               <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-                               <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-                               <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                               <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                               <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+                               <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
                         <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
                         <&clks IMX7D_PCIE_PHY_ROOT_CLK>;