usb: gadget: pch_udc: Fix usb/gadget/pch_udc: Fix ether gadget connect/disconnect...
authorTomoya MORINAGA <tomoya.rohm@gmail.com>
Thu, 12 Jan 2012 02:27:08 +0000 (11:27 +0900)
committerFelipe Balbi <balbi@ti.com>
Tue, 24 Jan 2012 09:35:13 +0000 (11:35 +0200)
ISSUE:
After a USB cable is connect/disconnected, the system rarely freezes.

CAUSE:
Since the USB device controller cannot know to disconnect the USB cable, when
it is used without detecting VBUS by GPIO, the UDC driver does not notify to
USB Gadget.

Since USB Gadget cannot know to disconnect, a false setting occurred when the
USB cable is connected/disconnect repeatedly.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
drivers/usb/gadget/pch_udc.c

index 842ca6349a90e04f8a94056d75e377747729ad91..c2f19752c074cf3993dbd888b8a87e68b109d163 100644 (file)
@@ -311,6 +311,7 @@ struct pch_udc_ep {
  * @registered:                driver regsitered with system
  * @suspended:         driver in suspended state
  * @connected:         gadget driver associated
+ * @vbus_session:      required vbus_session state
  * @set_cfg_not_acked: pending acknowledgement 4 setup
  * @waiting_zlp_ack:   pending acknowledgement 4 ZLP
  * @data_requests:     DMA pool for data requests
@@ -337,6 +338,7 @@ struct pch_udc_dev {
                        registered:1,
                        suspended:1,
                        connected:1,
+                       vbus_session:1,
                        set_cfg_not_acked:1,
                        waiting_zlp_ack:1;
        struct pci_pool         *data_requests;
@@ -553,6 +555,31 @@ static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
        pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
 }
 
+/**
+ * pch_udc_reconnect() - This API initializes usb device controller,
+ *                                             and clear the disconnect status.
+ * @dev:               Reference to pch_udc_regs structure
+ */
+static void pch_udc_init(struct pch_udc_dev *dev);
+static void pch_udc_reconnect(struct pch_udc_dev *dev)
+{
+       pch_udc_init(dev);
+
+       /* enable device interrupts */
+       /* pch_udc_enable_interrupts() */
+       pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR,
+                       UDC_DEVINT_UR | UDC_DEVINT_US |
+                       UDC_DEVINT_ENUM |
+                       UDC_DEVINT_SI | UDC_DEVINT_SC);
+
+       /* Clear the disconnect */
+       pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+       pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+       mdelay(1);
+       /* Resume USB signalling */
+       pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
 /**
  * pch_udc_vbus_session() - set or clearr the disconnect status.
  * @dev:       Reference to pch_udc_regs structure
@@ -563,10 +590,18 @@ static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
 static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
                                          int is_active)
 {
-       if (is_active)
-               pch_udc_clear_disconnect(dev);
-       else
+       if (is_active) {
+               pch_udc_reconnect(dev);
+               dev->vbus_session = 1;
+       } else {
+               if (dev->driver && dev->driver->disconnect) {
+                       spin_unlock(&dev->lock);
+                       dev->driver->disconnect(&dev->gadget);
+                       spin_lock(&dev->lock);
+               }
                pch_udc_set_disconnect(dev);
+               dev->vbus_session = 0;
+       }
 }
 
 /**
@@ -1126,7 +1161,17 @@ static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
        if (!gadget)
                return -EINVAL;
        dev = container_of(gadget, struct pch_udc_dev, gadget);
-       pch_udc_vbus_session(dev, is_on);
+       if (is_on) {
+               pch_udc_reconnect(dev);
+       } else {
+               if (dev->driver && dev->driver->disconnect) {
+                       spin_unlock(&dev->lock);
+                       dev->driver->disconnect(&dev->gadget);
+                       spin_lock(&dev->lock);
+               }
+               pch_udc_set_disconnect(dev);
+       }
+
        return 0;
 }
 
@@ -2482,6 +2527,15 @@ static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr)
                        dev->driver->suspend(&dev->gadget);
                        spin_lock(&dev->lock);
                }
+
+               if (dev->vbus_session == 0) {
+                       if (dev->driver && dev->driver->disconnect) {
+                               spin_unlock(&dev->lock);
+                               dev->driver->disconnect(&dev->gadget);
+                               spin_lock(&dev->lock);
+                       }
+                       pch_udc_reconnect(dev);
+               }
                dev_dbg(&dev->pdev->dev, "USB_SUSPEND\n");
        }
        /* Clear the SOF interrupt, if enabled */
@@ -2509,6 +2563,14 @@ static irqreturn_t pch_udc_isr(int irq, void *pdev)
        dev_intr = pch_udc_read_device_interrupts(dev);
        ep_intr = pch_udc_read_ep_interrupts(dev);
 
+       /* For a hot plug, this find that the controller is hung up. */
+       if (dev_intr == ep_intr)
+               if (dev_intr == pch_udc_readl(dev, UDC_DEVCFG_ADDR)) {
+                       dev_dbg(&dev->pdev->dev, "UDC: Hung up\n");
+                       /* The controller is reset */
+                       pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+                       return IRQ_HANDLED;
+               }
        if (dev_intr)
                /* Clear device interrupts */
                pch_udc_write_device_interrupts(dev, dev_intr);