USB: musb: workaround Blackfin FIFO anomalies
authorBryan Wu <cooloney@kernel.org>
Mon, 21 Dec 2009 14:49:52 +0000 (09:49 -0500)
committerGreg Kroah-Hartman <gregkh@suse.de>
Wed, 23 Dec 2009 19:34:19 +0000 (11:34 -0800)
Some of these workarounds are already in place, but labeled as affecting
all BF52x parts.  Since we have official anomaly numbers now, use those
defines.  And since writing to the FIFO has a similar hang issue as reading
from the FIFO, implement the workaround there too when necessary.

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/musb/blackfin.c
drivers/usb/musb/blackfin.h

index fe4934d9602c9a66d98d1498d5bd5d99a85f2337..ad26e656966510f84ef0244a7f57a56a3faa82c8 100644 (file)
@@ -29,6 +29,8 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 {
        void __iomem *fifo = hw_ep->fifo;
        void __iomem *epio = hw_ep->regs;
+       u8 epnum = hw_ep->epnum;
+       u16 dma_reg = 0;
 
        prefetch((u8 *)src);
 
@@ -39,67 +41,113 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 
        dump_fifo_data(src, len);
 
-       if (unlikely((unsigned long)src & 0x01))
-               outsw_8((unsigned long)fifo, src,
-                       len & 0x01 ? (len >> 1) + 1 : len >> 1);
-       else
-               outsw((unsigned long)fifo, src,
-                       len & 0x01 ? (len >> 1) + 1 : len >> 1);
-}
+       if (!ANOMALY_05000380 && epnum != 0) {
+               flush_dcache_range((unsigned int)src,
+                       (unsigned int)(src + len));
+
+               /* Setup DMA address register */
+               dma_reg = (u16) ((u32) src & 0xFFFF);
+               bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
+               SSYNC();
+
+               dma_reg = (u16) (((u32) src >> 16) & 0xFFFF);
+               bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
+               SSYNC();
+
+               /* Setup DMA count register */
+               bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
+               bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
+               SSYNC();
+
+               /* Enable the DMA */
+               dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION;
+               bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
+               SSYNC();
+
+               /* Wait for compelete */
+               while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
+                       cpu_relax();
+
+               /* acknowledge dma interrupt */
+               bfin_write_USB_DMA_INTERRUPT(1 << epnum);
+               SSYNC();
+
+               /* Reset DMA */
+               bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
+               SSYNC();
+       } else {
+               SSYNC();
+
+               if (unlikely((unsigned long)src & 0x01))
+                       outsw_8((unsigned long)fifo, src,
+                               len & 0x01 ? (len >> 1) + 1 : len >> 1);
+               else
+                       outsw((unsigned long)fifo, src,
+                               len & 0x01 ? (len >> 1) + 1 : len >> 1);
 
+       }
+}
 /*
  * Unload an endpoint's FIFO
  */
 void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 {
        void __iomem *fifo = hw_ep->fifo;
-
-#ifdef CONFIG_BF52x
        u8 epnum = hw_ep->epnum;
        u16 dma_reg = 0;
 
-       invalidate_dcache_range((unsigned int)dst,
-               (unsigned int)(dst + len));
+       if (ANOMALY_05000467 && epnum != 0) {
 
-       /* Setup DMA address register */
-       dma_reg = (u16) ((u32) dst & 0xFFFF);
-       bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
-       SSYNC();
+               invalidate_dcache_range((unsigned int)dst,
+                       (unsigned int)(dst + len));
 
-       dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF);
-       bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
-       SSYNC();
+               /* Setup DMA address register */
+               dma_reg = (u16) ((u32) dst & 0xFFFF);
+               bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
+               SSYNC();
 
-       /* Setup DMA count register */
-       bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
-       bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
-       SSYNC();
+               dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF);
+               bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
+               SSYNC();
 
-       /* Enable the DMA */
-       dma_reg = (epnum << 4) | DMA_ENA | INT_ENA;
-       bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
-       SSYNC();
+               /* Setup DMA count register */
+               bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
+               bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
+               SSYNC();
 
-       /* Wait for compelete */
-       while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
-               cpu_relax();
+               /* Enable the DMA */
+               dma_reg = (epnum << 4) | DMA_ENA | INT_ENA;
+               bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
+               SSYNC();
 
-       /* acknowledge dma interrupt */
-       bfin_write_USB_DMA_INTERRUPT(1 << epnum);
-       SSYNC();
+               /* Wait for compelete */
+               while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
+                       cpu_relax();
 
-       /* Reset DMA */
-       bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
-       SSYNC();
-#else
-       if (unlikely((unsigned long)dst & 0x01))
-               insw_8((unsigned long)fifo, dst,
-                       len & 0x01 ? (len >> 1) + 1 : len >> 1);
-       else
-               insw((unsigned long)fifo, dst,
-                       len & 0x01 ? (len >> 1) + 1 : len >> 1);
-#endif
+               /* acknowledge dma interrupt */
+               bfin_write_USB_DMA_INTERRUPT(1 << epnum);
+               SSYNC();
 
+               /* Reset DMA */
+               bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
+               SSYNC();
+       } else {
+               SSYNC();
+               /* Read the last byte of packet with odd size from address fifo + 4
+                * to trigger 1 byte access to EP0 FIFO.
+                */
+               if (len == 1)
+                       *dst = (u8)inw((unsigned long)fifo + 4);
+               else {
+                       if (unlikely((unsigned long)dst & 0x01))
+                               insw_8((unsigned long)fifo, dst, len >> 1);
+                       else
+                               insw((unsigned long)fifo, dst, len >> 1);
+
+                       if (len & 0x01)
+                               *(dst + len - 1) = (u8)inw((unsigned long)fifo + 4);
+               }
+       }
        DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
                        'R', hw_ep->epnum, fifo, len, dst);
 
index 10b7d7584f4b99e7d6818772a853516e97aec057..bd9352a2ef2a0b89f867121f998a9d3ef486bbed 100644 (file)
@@ -69,7 +69,6 @@ static void dump_fifo_data(u8 *buf, u16 len)
 #define dump_fifo_data(buf, len)       do {} while (0)
 #endif
 
-#ifdef CONFIG_BF52x
 
 #define USB_DMA_BASE           USB_DMA_INTERRUPT
 #define USB_DMAx_CTRL          0x04
@@ -79,7 +78,6 @@ static void dump_fifo_data(u8 *buf, u16 len)
 #define USB_DMAx_COUNT_HIGH    0x14
 
 #define USB_DMA_REG(ep, reg)   (USB_DMA_BASE + 0x20 * ep + reg)
-#endif
 
 /* Almost 1 second */
 #define TIMER_DELAY    (1 * HZ)