ACPI: thinkpad-acpi: clean-up fan subdriver quirk

Better document the Unitialized HFSP quirk, and modularize it a bit.
This makes the code flow easier to read and reduces LOC.

Apply the Unitialized HFSP closer to the source (i.e. inside the
get_fan_status()), this fixes a harmless buglet where at driver init
with the quirk active, the user could set the hwmon pwm1 attribute and
switch out of pwm1_mode=2 to pwm1_mode=0 without changing pwm1_mode
directly.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Tino Keitel <tino.keitel@tikei.de>
Signed-off-by: Len Brown <len.brown@intel.com>

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index d7d41ae2f2996033dd25b3a6cffe141530aa2c77..213219d938e8f16fdf73a06efe8d84df55738d5f 100644 (file)
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -5896,6 +5896,60 @@ TPACPI_HANDLE(sfan, ec, "SFAN",  /* 570 */
           "JFNS",              /* 770x-JL */
           );                   /* all others */
 
+/*
+ * Unitialized HFSP quirk: ACPI DSDT and EC fail to initialize the
+ * HFSP register at boot, so it contains 0x07 but the Thinkpad could
+ * be in auto mode (0x80).
+ *
+ * This is corrected by any write to HFSP either by the driver, or
+ * by the firmware.
+ *
+ * We assume 0x07 really means auto mode while this quirk is active,
+ * as this is far more likely than the ThinkPad being in level 7,
+ * which is only used by the firmware during thermal emergencies.
+ */
+
+static void fan_quirk1_detect(void)
+{
+       /* In some ThinkPads, neither the EC nor the ACPI
+        * DSDT initialize the HFSP register, and it ends up
+        * being initially set to 0x07 when it *could* be
+        * either 0x07 or 0x80.
+        *
+        * Enable for TP-1Y (T43), TP-78 (R51e),
+        * TP-76 (R52), TP-70 (T43, R52), which are known
+        * to be buggy. */
+       if (fan_control_initial_status == 0x07) {
+               switch (thinkpad_id.ec_model) {
+               case 0x5931: /* TP-1Y */
+               case 0x3837: /* TP-78 */
+               case 0x3637: /* TP-76 */
+               case 0x3037: /* TP-70 */
+                       printk(TPACPI_NOTICE
+                              "fan_init: initial fan status is unknown, "
+                              "assuming it is in auto mode\n");
+                       tp_features.fan_ctrl_status_undef = 1;
+                       ;;
+               }
+       }
+}
+
+static void fan_quirk1_handle(u8 *fan_status)
+{
+       if (unlikely(tp_features.fan_ctrl_status_undef)) {
+               if (*fan_status != fan_control_initial_status) {
+                       /* something changed the HFSP regisnter since
+                        * driver init time, so it is not undefined
+                        * anymore */
+                       tp_features.fan_ctrl_status_undef = 0;
+               } else {
+                       /* Return most likely status. In fact, it
+                        * might be the only possible status */
+                       *fan_status = TP_EC_FAN_AUTO;
+               }
+       }
+}
+
 /*
  * Call with fan_mutex held
  */
@@ -5934,8 +5988,10 @@ static int fan_get_status(u8 *status)
                if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
                        return -EIO;
 
-               if (likely(status))
+               if (likely(status)) {
                        *status = s;
+                       fan_quirk1_handle(status);
+               }
 
                break;
 
@@ -6245,16 +6301,6 @@ static ssize_t fan_pwm1_enable_show(struct device *dev,
        if (res)
                return res;
 
-       if (unlikely(tp_features.fan_ctrl_status_undef)) {
-               if (status != fan_control_initial_status) {
-                       tp_features.fan_ctrl_status_undef = 0;
-               } else {
-                       /* Return most likely status. In fact, it
-                        * might be the only possible status */
-                       status = TP_EC_FAN_AUTO;
-               }
-       }
-
        if (status & TP_EC_FAN_FULLSPEED) {
                mode = 0;
        } else if (status & TP_EC_FAN_AUTO) {
@@ -6319,14 +6365,6 @@ static ssize_t fan_pwm1_show(struct device *dev,
        if (res)
                return res;
 
-       if (unlikely(tp_features.fan_ctrl_status_undef)) {
-               if (status != fan_control_initial_status) {
-                       tp_features.fan_ctrl_status_undef = 0;
-               } else {
-                       status = TP_EC_FAN_AUTO;
-               }
-       }
-
        if ((status &
             (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) != 0)
                status = fan_control_desired_level;
@@ -6458,29 +6496,7 @@ static int __init fan_init(struct ibm_init_struct *iibm)
                if (likely(acpi_ec_read(fan_status_offset,
                                        &fan_control_initial_status))) {
                        fan_status_access_mode = TPACPI_FAN_RD_TPEC;
-
-                       /* In some ThinkPads, neither the EC nor the ACPI
-                        * DSDT initialize the fan status, and it ends up
-                        * being set to 0x07 when it *could* be either
-                        * 0x07 or 0x80.
-                        *
-                        * Enable for TP-1Y (T43), TP-78 (R51e),
-                        * TP-76 (R52), TP-70 (T43, R52), which are known
-                        * to be buggy. */
-                       if (fan_control_initial_status == 0x07) {
-                               switch (thinkpad_id.ec_model) {
-                               case 0x5931: /* TP-1Y */
-                               case 0x3837: /* TP-78 */
-                               case 0x3637: /* TP-76 */
-                               case 0x3037: /* TP-70 */
-                                       printk(TPACPI_NOTICE
-                                              "fan_init: initial fan status "
-                                              "is unknown, assuming it is "
-                                              "in auto mode\n");
-                                       tp_features.fan_ctrl_status_undef = 1;
-                                       ;;
-                               }
-                       }
+                       fan_quirk1_detect();
                } else {
                        printk(TPACPI_ERR
                               "ThinkPad ACPI EC access misbehaving, "
@@ -6669,15 +6685,6 @@ static int fan_read(char *p)
                if (rc < 0)
                        return rc;
 
-               if (unlikely(tp_features.fan_ctrl_status_undef)) {
-                       if (status != fan_control_initial_status)
-                               tp_features.fan_ctrl_status_undef = 0;
-                       else
-                               /* Return most likely status. In fact, it
-                                * might be the only possible status */
-                               status = TP_EC_FAN_AUTO;
-               }
-
                len += sprintf(p + len, "status:\t\t%s\n",
                               (status != 0) ? "enabled" : "disabled");