Fix all references to Documentation/ide/ide.txt.
Add/update ide/00-INDEX file.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
- directory with info about Linux on Intel 32 bit architecture.
ia64/
- directory with info about Linux on Intel 64 bit architecture.
-ide.txt
- - important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
infiniband/
- directory with documents concerning Linux InfiniBand support.
initrd.txt
---------------
0. The ide-cd relies on the ide disk driver. See
- Documentation/ide.txt for up-to-date information on the ide
+ Documentation/ide/ide.txt for up-to-date information on the ide
driver.
1. Make sure that the ide and ide-cd drivers are compiled into the
Depending on what type of IDE interface you have, you may need to
specify additional configuration options. See
- Documentation/ide.txt.
+ Documentation/ide/ide.txt.
2. You should also ensure that the iso9660 filesystem is either
compiled into the kernel or available as a loadable module. You
on the primary IDE interface are called `hda' and `hdb',
respectively. The drives on the secondary interface are called
`hdc' and `hdd'. (Interfaces at other locations get other letters
- in the third position; see Documentation/ide.txt.)
+ in the third position; see Documentation/ide/ide.txt.)
If you want your CDROM drive to be found automatically by the
driver, you should make sure your IDE interface uses either the
be jumpered as `master'. (If for some reason you cannot configure
your system in this manner, you can probably still use the driver.
You may have to pass extra configuration information to the kernel
- when you boot, however. See Documentation/ide.txt for more
+ when you boot, however. See Documentation/ide/ide.txt for more
information.)
4. Boot the system. If the drive is recognized, you should see a
This section discusses some common problems encountered when trying to
use the driver, and some possible solutions. Note that if you are
experiencing problems, you should probably also review
-Documentation/ide.txt for current information about the underlying
+Documentation/ide/ide.txt for current information about the underlying
IDE support code. Some of these items apply only to earlier versions
of the driver, but are mentioned here for completeness.
a. Drive is not detected during booting.
- Review the configuration instructions above and in
- Documentation/ide.txt, and check how your hardware is
+ Documentation/ide/ide.txt, and check how your hardware is
configured.
- If your drive is the only device on an IDE interface, it should
- If your IDE interface is not at the standard addresses of 0x170
or 0x1f0, you'll need to explicitly inform the driver using a
- lilo option. See Documentation/ide.txt. (This feature was
+ lilo option. See Documentation/ide/ide.txt. (This feature was
added around kernel version 1.3.30.)
- If the autoprobing is not finding your drive, you can tell the
Support for some interfaces needing extra initialization is
provided in later 1.3.x kernels. You may need to turn on
additional kernel configuration options to get them to work;
- see Documentation/ide.txt.
+ see Documentation/ide/ide.txt.
Even if support is not available for your interface, you may be
able to get it to work with the following procedure. First boot
be worked around by specifying the `serialize' option when
booting. Recent kernels should be able to detect the need for
this automatically in most cases, but the detection is not
- foolproof. See Documentation/ide.txt for more information
+ foolproof. See Documentation/ide/ide.txt for more information
about the `serialize' option and the CMD640B.
- Note that many MS-DOS CDROM drivers will work with such buggy
--- /dev/null
+00-INDEX
+ - this file
+ChangeLog.ide-cd.1994-2004
+ - ide-cd changelog
+ChangeLog.ide-floppy.1996-2002
+ - ide-floppy changelog
+ChangeLog.ide-tape.1995-2002
+ - ide-tape changelog
+ide-tape.txt
+ - info on the IDE ATAPI streaming tape driver
+ide.txt
+ - important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
Format: <cyl>,<head>,<sect>
hd?= [HW] (E)IDE subsystem
- hd?lun= See Documentation/ide.txt.
+ hd?lun= See Documentation/ide/ide.txt.
highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
size of <nn>. This works even on boxes that have no
ide= [HW] (E)IDE subsystem
Format: ide=nodma or ide=doubler or ide=reverse
- See Documentation/ide.txt.
+ See Documentation/ide/ide.txt.
ide?= [HW] (E)IDE subsystem
Format: ide?=noprobe or chipset specific parameters.
- See Documentation/ide.txt.
+ See Documentation/ide/ide.txt.
idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
- See Documentation/ide.txt.
+ See Documentation/ide/ide.txt.
idle= [X86]
Format: idle=poll or idle=mwait
To compile this driver as a module, choose M here: the
module will be called ide.
- For further information, please read <file:Documentation/ide.txt>.
+ For further information, please read <file:Documentation/ide/ide.txt>.
If unsure, say Y.
Useful information about large (>540 MB) IDE disks, multiple
interfaces, what to do if ATA/IDE devices are not automatically
detected, sound card ATA/IDE ports, module support, and other
- topics, is contained in <file:Documentation/ide.txt>. For detailed
+ topics, is contained in <file:Documentation/ide/ide.txt>. For detailed
information about hard drives, consult the Disk-HOWTO and the
Multi-Disk-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
<ftp://ibiblio.org/pub/Linux/system/hardware/>.
To compile this driver as a module, choose M here and read
- <file:Documentation/ide.txt>. The module will be called ide-mod.
+ <file:Documentation/ide/ide.txt>. The module will be called ide-mod.
Do not compile this driver as a module if your root file system (the
one containing the directory /) is located on an IDE device.
if BLK_DEV_IDE
-comment "Please see Documentation/ide.txt for help/info on IDE drives"
+comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
config BLK_DEV_IDE_SATA
bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
along with other IDE devices, as "hdb" or "hdc", or something
similar, and will be mapped to a character device such as "ht0"
(check the boot messages with dmesg). Be sure to consult the
- <file:drivers/ide/ide-tape.c> and <file:Documentation/ide.txt> files
- for usage information.
+ <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.txt>
+ files for usage information.
To compile this driver as a module, choose M here: the
module will be called ide-tape.
The CMD640 chip is also used on add-in cards by Acculogic, and on
the "CSA-6400E PCI to IDE controller" that some people have. For
- details, read <file:Documentation/ide.txt>.
+ details, read <file:Documentation/ide/ide.txt>.
config BLK_DEV_CMD640_ENHANCED
bool "CMD640 enhanced support"
help
This option includes support for setting/autotuning PIO modes and
prefetch on CMD640 IDE interfaces. For details, read
- <file:Documentation/ide.txt>. If you have a CMD640 IDE interface
+ <file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface
and your BIOS does not already do this for you, then say Y here.
Otherwise say N.
This driver is enabled at runtime using the "ali14xx.probe" kernel
boot parameter. It enables support for the secondary IDE interface
of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
- I/O speeds to be set as well. See the files
- <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c>
- for more info.
+ I/O speeds to be set as well.
+ See the files <file:Documentation/ide/ide.txt> and
+ <file:drivers/ide/legacy/ali14xx.c> for more info.
config BLK_DEV_DTC2278
tristate "DTC-2278 support"
This driver is enabled at runtime using the "dtc2278.probe" kernel
boot parameter. It enables support for the secondary IDE interface
of the DTC-2278 card, and permits faster I/O speeds to be set as
- well. See the <file:Documentation/ide.txt> and
+ well. See the <file:Documentation/ide/ide.txt> and
<file:drivers/ide/legacy/dtc2278.c> files for more info.
config BLK_DEV_HT6560B
This driver is enabled at runtime using the "ht6560b.probe" kernel
boot parameter. It enables support for the secondary IDE interface
of the Holtek card, and permits faster I/O speeds to be set as well.
- See the <file:Documentation/ide.txt> and
+ See the <file:Documentation/ide/ide.txt> and
<file:drivers/ide/legacy/ht6560b.c> files for more info.
config BLK_DEV_QD65XX
help
This driver is enabled at runtime using the "qd65xx.probe" kernel
boot parameter. It permits faster I/O speeds to be set. See the
- <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
+ <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
for more info.
config BLK_DEV_UMC8672
This driver is enabled at runtime using the "umc8672.probe" kernel
boot parameter. It enables support for the secondary IDE interface
of the UMC-8672, and permits faster I/O speeds to be set as well.
- See the files <file:Documentation/ide.txt> and
+ See the files <file:Documentation/ide/ide.txt> and
<file:drivers/ide/legacy/umc8672.c> for more info.
endif
* ide_setup() gets called VERY EARLY during initialization,
* to handle kernel "command line" strings beginning with "hdx=" or "ide".
*
- * Remember to update Documentation/ide.txt if you change something here.
+ * Remember to update Documentation/ide/ide.txt if you change something here.
*/
static int __init ide_setup(char *s)
{
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff