ARM: dts: imx51-babbage: Sort nodes by name

This patch sorts nodes by name and moves "iomux" configuration at
the bottom of file.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index ed9d769b1a23cefe41912c6668de6209326d7ac5..6484b739ae3799992060ff97ecf108d9f42f9905 100644 (file)
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -21,6 +21,20 @@
                reg = <0x90000000 0x20000000>;
        };
 
+       clocks {
+               ckih1 {
+                       clock-frequency = <22579200>;
+               };
+
+               clk_26M: codec_clock {
+                       compatible = "fixed-clock";
+                       reg=<0>;
+                       #clock-cells = <0>;
+                       clock-frequency = <26000000>;
+                       gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+               };
+       };
+
        display0: display@di0 {
                compatible = "fsl,imx-parallel-display";
                interface-pix-fmt = "rgb24";
@@ -104,34 +118,6 @@
                };
        };
 
-       sound {
-               compatible = "fsl,imx51-babbage-sgtl5000",
-                            "fsl,imx-audio-sgtl5000";
-               model = "imx51-babbage-sgtl5000";
-               ssi-controller = <&ssi2>;
-               audio-codec = <&sgtl5000>;
-               audio-routing =
-                       "MIC_IN", "Mic Jack",
-                       "Mic Jack", "Mic Bias",
-                       "Headphone Jack", "HP_OUT";
-               mux-int-port = <2>;
-               mux-ext-port = <3>;
-       };
-
-       clocks {
-               ckih1 {
-                       clock-frequency = <22579200>;
-               };
-
-               clk_26M: codec_clock {
-                       compatible = "fixed-clock";
-                       reg=<0>;
-                       #clock-cells = <0>;
-                       clock-frequency = <26000000>;
-                       gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-               };
-       };
-
        regulators {
                compatible = "simple-bus";
                #address-cells = <1>;
@@ -162,6 +148,20 @@
                };
        };
 
+       sound {
+               compatible = "fsl,imx51-babbage-sgtl5000",
+                            "fsl,imx-audio-sgtl5000";
+               model = "imx51-babbage-sgtl5000";
+               ssi-controller = <&ssi2>;
+               audio-codec = <&sgtl5000>;
+               audio-routing =
+                       "MIC_IN", "Mic Jack",
+                       "Mic Jack", "Mic Bias",
+                       "Headphone Jack", "HP_OUT";
+               mux-int-port = <2>;
+               mux-ext-port = <3>;
+       };
+
        usbphy {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -176,26 +176,9 @@
        };
 };
 
-&esdhc1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_esdhc1>;
-       fsl,cd-controller;
-       fsl,wp-controller;
-       status = "okay";
-};
-
-&esdhc2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_esdhc2>;
-       cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-       wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-       status = "okay";
-};
-
-&uart3 {
+&audmux {
        pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart3>;
-       fsl,uart-has-rtscts;
+       pinctrl-0 = <&pinctrl_audmux>;
        status = "okay";
 };
 
@@ -327,6 +310,47 @@
        };
 };
 
+&esdhc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_esdhc1>;
+       fsl,cd-controller;
+       fsl,wp-controller;
+       status = "okay";
+};
+
+&esdhc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_esdhc2>;
+       cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+       wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
+&fec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_fec>;
+       phy-mode = "mii";
+       phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+       phy-reset-duration = <1>;
+       status = "okay";
+};
+
+&i2c2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c2>;
+       status = "okay";
+
+       sgtl5000: codec@0a {
+               compatible = "fsl,sgtl5000";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_clkcodec>;
+               reg = <0x0a>;
+               clocks = <&clk_26M>;
+               VDDA-supply = <&vdig_reg>;
+               VDDIO-supply = <&vvideo_reg>;
+       };
+};
+
 &ipu_di0_disp0 {
        remote-endpoint = <&display0_in>;
 };
@@ -335,11 +359,72 @@
        remote-endpoint = <&display1_in>;
 };
 
+&kpp {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_kpp>;
+       linux,keymap = <
+               MATRIX_KEY(0, 0, KEY_UP)
+               MATRIX_KEY(0, 1, KEY_DOWN)
+               MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
+               MATRIX_KEY(0, 3, KEY_HOME)
+               MATRIX_KEY(1, 0, KEY_RIGHT)
+               MATRIX_KEY(1, 1, KEY_LEFT)
+               MATRIX_KEY(1, 2, KEY_ENTER)
+               MATRIX_KEY(1, 3, KEY_VOLUMEUP)
+               MATRIX_KEY(2, 0, KEY_F6)
+               MATRIX_KEY(2, 1, KEY_F8)
+               MATRIX_KEY(2, 2, KEY_F9)
+               MATRIX_KEY(2, 3, KEY_F10)
+               MATRIX_KEY(3, 0, KEY_F1)
+               MATRIX_KEY(3, 1, KEY_F2)
+               MATRIX_KEY(3, 2, KEY_F3)
+               MATRIX_KEY(3, 3, KEY_POWER)
+       >;
+       status = "okay";
+};
+
 &ssi2 {
        fsl,mode = "i2s-slave";
        status = "okay";
 };
 
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       fsl,uart-has-rtscts;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart3>;
+       fsl,uart-has-rtscts;
+       status = "okay";
+};
+
+&usbh1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbh1>;
+       vbus-supply = <&reg_usbh1_vbus>;
+       fsl,usbphy = <&usbh1phy>;
+       phy_type = "ulpi";
+       status = "okay";
+};
+
+&usbotg {
+       dr_mode = "otg";
+       disable-over-current;
+       phy_type = "utmi_wide";
+       vbus-supply = <&reg_usbotg_vbus>;
+       status = "okay";
+};
+
 &iomuxc {
        imx51-babbage {
                pinctrl_audmux: audmuxgrp {
@@ -412,7 +497,7 @@
                                MX51_PAD_NANDF_CS6__FEC_TDATA3          0x80000000
                                MX51_PAD_NANDF_CS7__FEC_TX_EN           0x80000000
                                MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK      0x80000000
-                               MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */
+                               MX51_PAD_EIM_A20__GPIO2_14              0x85 /* Reset */
                        >;
                };
 
@@ -564,88 +649,3 @@
                };
        };
 };
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-       fsl,uart-has-rtscts;
-       status = "okay";
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart2>;
-       status = "okay";
-};
-
-&i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_i2c2>;
-       status = "okay";
-
-       sgtl5000: codec@0a {
-               compatible = "fsl,sgtl5000";
-               pinctrl-names = "default";
-               pinctrl-0 = <&pinctrl_clkcodec>;
-               reg = <0x0a>;
-               clocks = <&clk_26M>;
-               VDDA-supply = <&vdig_reg>;
-               VDDIO-supply = <&vvideo_reg>;
-       };
-};
-
-&audmux {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_audmux>;
-       status = "okay";
-};
-
-&fec {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_fec>;
-       phy-mode = "mii";
-       phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-       phy-reset-duration = <1>;
-       status = "okay";
-};
-
-&kpp {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_kpp>;
-       linux,keymap = <
-               MATRIX_KEY(0, 0, KEY_UP)
-               MATRIX_KEY(0, 1, KEY_DOWN)
-               MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
-               MATRIX_KEY(0, 3, KEY_HOME)
-               MATRIX_KEY(1, 0, KEY_RIGHT)
-               MATRIX_KEY(1, 1, KEY_LEFT)
-               MATRIX_KEY(1, 2, KEY_ENTER)
-               MATRIX_KEY(1, 3, KEY_VOLUMEUP)
-               MATRIX_KEY(2, 0, KEY_F6)
-               MATRIX_KEY(2, 1, KEY_F8)
-               MATRIX_KEY(2, 2, KEY_F9)
-               MATRIX_KEY(2, 3, KEY_F10)
-               MATRIX_KEY(3, 0, KEY_F1)
-               MATRIX_KEY(3, 1, KEY_F2)
-               MATRIX_KEY(3, 2, KEY_F3)
-               MATRIX_KEY(3, 3, KEY_POWER)
-               >;
-       status = "okay";
-};
-
-&usbh1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usbh1>;
-       vbus-supply = <&reg_usbh1_vbus>;
-       fsl,usbphy = <&usbh1phy>;
-       phy_type = "ulpi";
-       status = "okay";
-};
-
-&usbotg {
-       dr_mode = "otg";
-       disable-over-current;
-       phy_type = "utmi_wide";
-       vbus-supply = <&reg_usbotg_vbus>;
-       status = "okay";
-};