powerpc/mpc85xx: Add BSC9132 QDS Support
authorharninder rai <harninder.rai@freescale.com>
Thu, 15 May 2014 07:45:33 +0000 (13:15 +0530)
committerScott Wood <scottwood@freescale.com>
Thu, 22 May 2014 23:08:32 +0000 (18:08 -0500)
- BSC9132 is an integrated device that targets Femto base station market.
  It combines Power Architecture e500v2 and DSP StarCore SC3850 technologies
  with MAPLE-B2F baseband acceleration processing elements

- BSC9132QDS Overview
     2Gbyte DDR3 (on board DDR)
     32Mbyte 16bit NOR flash
     128Mbyte 2K page size NAND Flash
     256 Kbit M24256 I2C EEPROM
     128 Mbit SPI Flash memory
     SD slot
     eTSEC1: Connected to SGMII PHY
     eTSEC2: Connected to SGMII PHY
     DUART interface: supports one UARTs up to 115200 bps for console display

Signed-off-by: Harninder Rai <harninder.rai@freescale.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Documentation/devicetree/bindings/powerpc/fsl/board.txt
arch/powerpc/boot/dts/bsc9132qds.dts [new file with mode: 0644]
arch/powerpc/boot/dts/bsc9132qds.dtsi [new file with mode: 0644]
arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi [new file with mode: 0644]
arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi [new file with mode: 0644]
arch/powerpc/platforms/85xx/Kconfig
arch/powerpc/platforms/85xx/Makefile
arch/powerpc/platforms/85xx/bsc913x_qds.c [new file with mode: 0644]

index 380914e965e084c7f6f61e1444eac87bcef3dc81..700dec4774fa912b5958a2bd82c0b0c55569ae2c 100644 (file)
@@ -67,3 +67,20 @@ Example:
                        gpio-controller;
                };
        };
+
+* Freescale on-board FPGA connected on I2C bus
+
+Some Freescale boards like BSC9132QDS have on board FPGA connected on
+the i2c bus.
+
+Required properties:
+- compatible: Should be a board-specific string followed by a string
+  indicating the type of FPGA.  Example:
+       "fsl,<board>-fpga", "fsl,fpga-qixis-i2c"
+- reg: Should contain the address of the FPGA
+
+Example:
+       fpga: fpga@66 {
+               compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+               reg = <0x66>;
+       };
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts b/arch/powerpc/boot/dts/bsc9132qds.dts
new file mode 100644 (file)
index 0000000..6cab106
--- /dev/null
@@ -0,0 +1,35 @@
+/*
+ * BSC9132 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/bsc9132si-pre.dtsi"
+
+/ {
+       model = "fsl,bsc9132qds";
+       compatible = "fsl,bsc9132qds";
+
+       memory {
+               device_type = "memory";
+       };
+
+       ifc: ifc@ff71e000 {
+               /* NOR, NAND Flash on board */
+               ranges = <0x0 0x0 0x0 0x88000000 0x08000000
+                         0x1 0x0 0x0 0xff800000 0x00010000>;
+               reg = <0x0 0xff71e000 0x0 0x2000>;
+       };
+
+       soc: soc@ff700000 {
+               ranges = <0x0 0x0 0xff700000 0x100000>;
+       };
+};
+
+/include/ "bsc9132qds.dtsi"
+/include/ "fsl/bsc9132si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dtsi b/arch/powerpc/boot/dts/bsc9132qds.dtsi
new file mode 100644 (file)
index 0000000..af8e888
--- /dev/null
@@ -0,0 +1,101 @@
+/*
+ * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+       nor@0,0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "cfi-flash";
+               reg = <0x0 0x0 0x8000000>;
+               bank-width = <2>;
+               device-width = <1>;
+       };
+
+       nand@1,0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "fsl,ifc-nand";
+               reg = <0x1 0x0 0x4000>;
+       };
+};
+
+&soc {
+       spi@7000 {
+               flash@0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "spansion,s25sl12801";
+                       reg = <0>;
+                       spi-max-frequency = <30000000>;
+               };
+       };
+
+       i2c@3000 {
+               fpga: fpga@66 {
+                       compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+                       reg = <0x66>;
+               };
+       };
+
+       usb@22000 {
+               phy_type = "ulpi";
+       };
+
+       mdio@24000 {
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+               };
+
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+               };
+
+               tbi0: tbi-phy@11 {
+                       reg = <0x1f>;
+                       device_type = "tbi-phy";
+               };
+       };
+
+       enet0: ethernet@b0000 {
+               phy-handle = <&phy0>;
+               tbi-handle = <&tbi0>;
+               phy-connection-type = "sgmii";
+       };
+
+       enet1: ethernet@b1000 {
+               phy-handle = <&phy1>;
+               tbi-handle = <&tbi0>;
+               phy-connection-type = "sgmii";
+       };
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
new file mode 100644 (file)
index 0000000..c723071
--- /dev/null
@@ -0,0 +1,185 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+       #address-cells = <2>;
+       #size-cells = <1>;
+       compatible = "fsl,ifc", "simple-bus";
+       /* FIXME: Test whether interrupts are split */
+       interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+&soc {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       device_type = "soc";
+       compatible = "fsl,bsc9132-immr", "simple-bus";
+       bus-frequency = <0>;            // Filled out by uboot.
+
+       ecm-law@0 {
+               compatible = "fsl,ecm-law";
+               reg = <0x0 0x1000>;
+               fsl,num-laws = <12>;
+       };
+
+       ecm@1000 {
+               compatible = "fsl,bsc9132-ecm", "fsl,ecm";
+               reg = <0x1000 0x1000>;
+               interrupts = <16 2 0 0>;
+       };
+
+       memory-controller@2000 {
+               compatible = "fsl,bsc9132-memory-controller";
+               reg = <0x2000 0x1000>;
+               interrupts = <16 2 1 8>;
+       };
+
+/include/ "pq3-i2c-0.dtsi"
+       i2c@3000 {
+               interrupts = <17 2 0 0>;
+       };
+
+/include/ "pq3-i2c-1.dtsi"
+       i2c@3100 {
+               interrupts = <17 2 0 0>;
+       };
+
+/include/ "pq3-duart-0.dtsi"
+       serial0: serial@4500 {
+               interrupts = <18 2 0 0>;
+       };
+
+       serial1: serial@4600 {
+               interrupts = <18 2 0 0 >;
+       };
+/include/ "pq3-espi-0.dtsi"
+       spi0: spi@7000 {
+               fsl,espi-num-chipselects = <1>;
+               interrupts = <22 0x2 0 0>;
+       };
+
+/include/ "pq3-gpio-0.dtsi"
+       gpio-controller@f000 {
+               interrupts = <19 0x2 0 0>;
+               };
+
+       L2: l2-cache-controller@20000 {
+               compatible = "fsl,bsc9132-l2-cache-controller";
+               reg = <0x20000 0x1000>;
+               cache-line-size = <32>; // 32 bytes
+               cache-size = <0x40000>; // L2,256K
+               interrupts = <16 2 1 0>;
+       };
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+       dma-channel@0 {
+               interrupts = <62 2 0 0>;
+       };
+
+       dma-channel@80 {
+               interrupts = <63 2 0 0>;
+       };
+
+       dma-channel@100 {
+               interrupts = <64 2 0 0>;
+       };
+
+       dma-channel@180 {
+               interrupts = <65 2 0 0>;
+       };
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+       compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+       interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+       sdhc@2e000 {
+               fsl,sdhci-auto-cmd12;
+               interrupts = <41 0x2 0 0>;
+       };
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+       interrupts       = <57 2 0 0>;
+
+       sec_jr0: jr@1000 {
+               interrupts       = <58 2 0 0>;
+       };
+
+       sec_jr1: jr@2000 {
+               interrupts       = <59 2 0 0>;
+       };
+
+       sec_jr2: jr@3000 {
+               interrupts       = <60 2 0 0>;
+       };
+
+       sec_jr3: jr@4000 {
+               interrupts       = <61 2 0 0>;
+       };
+};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+       queue-group@b0000 {
+               fsl,rx-bit-map = <0xff>;
+               fsl,tx-bit-map = <0xff>;
+               interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+       };
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+       queue-group@b1000 {
+               fsl,rx-bit-map = <0xff>;
+               fsl,tx-bit-map = <0xff>;
+               interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+       };
+};
+
+global-utilities@e0000 {
+               compatible = "fsl,bsc9132-guts";
+               reg = <0xe0000 0x1000>;
+               fsl,has-rstcr;
+       };
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
new file mode 100644 (file)
index 0000000..301a9db
--- /dev/null
@@ -0,0 +1,66 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <2>;
+       interrupt-parent = <&mpic>;
+
+       aliases {
+               serial0 = &serial0;
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0: PowerPC,e500v2@0 {
+                       device_type = "cpu";
+                       reg = <0x0>;
+                       next-level-cache = <&L2>;
+               };
+
+               cpu1: PowerPC,e500v2@1 {
+                       device_type = "cpu";
+                       reg = <0x1>;
+                       next-level-cache = <&L2>;
+               };
+       };
+};
index a3cd2afee511c579324eaba23db12ae19b8224a1..f442120e0033d0767473356909a92e8dfe8df0a5 100644 (file)
@@ -38,6 +38,15 @@ config C293_PCIE
          help
          This option enables support for the C293PCIE board
 
+config BSC9132_QDS
+       bool "Freescale BSC9132QDS"
+       select DEFAULT_UIMAGE
+       help
+         This option enables support for the Freescale BSC9132 QDS board.
+         BSC9132 is a heterogeneous SoC containing dual e500v2 powerpc cores
+         and dual StarCore SC3850 DSP cores.
+         Manufacturer : Freescale Semiconductor, Inc
+
 config MPC8540_ADS
        bool "Freescale MPC8540 ADS"
        select DEFAULT_UIMAGE
index 822103e8d34f3dd78d6da6db94a677d00008408e..7303260466255605ec7bc6f4e1ebcad9ba8f29ec 100644 (file)
@@ -6,6 +6,7 @@ obj-$(CONFIG_SMP) += smp.o
 obj-y += common.o
 
 obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
+obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
 obj-$(CONFIG_C293_PCIE)   += c293pcie.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
diff --git a/arch/powerpc/platforms/85xx/bsc913x_qds.c b/arch/powerpc/platforms/85xx/bsc913x_qds.c
new file mode 100644 (file)
index 0000000..f0927e5
--- /dev/null
@@ -0,0 +1,74 @@
+/*
+ * BSC913xQDS Board Setup
+ *
+ * Author:
+ *   Harninder Rai <harninder.rai@freescale.com>
+ *   Priyanka Jain <Priyanka.Jain@freescale.com>
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/udbg.h>
+
+#include "mpc85xx.h"
+#include "smp.h"
+
+void __init bsc913x_qds_pic_init(void)
+{
+       struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+         MPIC_SINGLE_DEST_CPU,
+         0, 256, " OpenPIC  ");
+
+       if (!mpic)
+               pr_err("bsc913x: Failed to allocate MPIC structure\n");
+       else
+               mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init bsc913x_qds_setup_arch(void)
+{
+       if (ppc_md.progress)
+               ppc_md.progress("bsc913x_qds_setup_arch()", 0);
+
+#if defined(CONFIG_SMP)
+       mpc85xx_smp_init();
+#endif
+
+       pr_info("bsc913x board from Freescale Semiconductor\n");
+}
+
+machine_device_initcall(bsc9132_qds, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+
+static int __init bsc9132_qds_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       return of_flat_dt_is_compatible(root, "fsl,bsc9132qds");
+}
+
+define_machine(bsc9132_qds) {
+       .name                   = "BSC9132 QDS",
+       .probe                  = bsc9132_qds_probe,
+       .setup_arch             = bsc913x_qds_setup_arch,
+       .init_IRQ               = bsc913x_qds_pic_init,
+       .get_irq                = mpic_get_irq,
+       .restart                = fsl_rstcr_restart,
+       .calibrate_decr         = generic_calibrate_decr,
+       .progress               = udbg_progress,
+};