[PATCH] FRV: Use the generic IRQ stuff
authorDavid Howells <dhowells@redhat.com>
Tue, 26 Sep 2006 06:32:04 +0000 (23:32 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Tue, 26 Sep 2006 15:48:53 +0000 (08:48 -0700)
Make the FRV arch use the generic IRQ code rather than having its own
routines for doing so.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 files changed:
arch/frv/Kconfig
arch/frv/kernel/Makefile
arch/frv/kernel/irq-mb93091.c
arch/frv/kernel/irq-mb93093.c
arch/frv/kernel/irq-mb93493.c
arch/frv/kernel/irq-routing.c [deleted file]
arch/frv/kernel/irq.c
arch/frv/kernel/setup.c
arch/frv/kernel/time.c
arch/frv/mb93090-mb00/pci-irq.c
include/asm-frv/cpu-irqs.h
include/asm-frv/hardirq.h
include/asm-frv/irq-routing.h [deleted file]
include/asm-frv/irq.h
include/asm-frv/mb93091-fpga-irqs.h
include/asm-frv/mb93093-fpga-irqs.h
include/asm-frv/mb93493-irqs.h
include/asm-frv/mb93493-regs.h

index a601a17cf568b8f409fc39e2023bef84d557d012..5833808fb823bd19824de4c95412d1f7c4f5eb06 100644 (file)
@@ -27,7 +27,7 @@ config GENERIC_CALIBRATE_DELAY
 
 config GENERIC_HARDIRQS
        bool
-       default n
+       default y
 
 config GENERIC_TIME
        bool
@@ -251,6 +251,12 @@ config MB93091_NO_MB
 endchoice
 endif
 
+config FUJITSU_MB93493
+       bool "MB93493 Multimedia chip"
+       help
+         Select this option if the MB93493 multimedia chip is going to be
+         used.
+
 choice
        prompt "GP-Relative data support"
        default GPREL_DATA_8
index 5a827b349b5e989a9de3032dd2bc572a3c4fb79a..32db3499c4611f2f79f2ea250e48c59a1084480f 100644 (file)
@@ -10,15 +10,14 @@ extra-y:= head.o init_task.o vmlinux.lds
 obj-y := $(heads-y) entry.o entry-table.o break.o switch_to.o kernel_thread.o \
         process.o traps.o ptrace.o signal.o dma.o \
         sys_frv.o time.o semaphore.o setup.o frv_ksyms.o \
-        debug-stub.o irq.o irq-routing.o sleep.o uaccess.o
+        debug-stub.o irq.o sleep.o uaccess.o
 
 obj-$(CONFIG_GDBSTUB)          += gdb-stub.o gdb-io.o
 
 obj-$(CONFIG_MB93091_VDK)      += irq-mb93091.o
-obj-$(CONFIG_MB93093_PDK)      += irq-mb93093.o
-obj-$(CONFIG_FUJITSU_MB93493)  += irq-mb93493.o
 obj-$(CONFIG_PM)               += pm.o cmode.o
 obj-$(CONFIG_MB93093_PDK)      += pm-mb93093.o
+obj-$(CONFIG_FUJITSU_MB93493)  += irq-mb93493.o
 obj-$(CONFIG_SYSCTL)           += sysctl.o
 obj-$(CONFIG_FUTEX)            += futex.o
 obj-$(CONFIG_MODULES)          += module.o
index 1381abcd5cc95e7082d77b3b1760ce5ca808761b..635d23437666abb75461879507be76568ac96a6d 100644 (file)
@@ -24,7 +24,6 @@
 #include <asm/delay.h>
 #include <asm/irq.h>
 #include <asm/irc-regs.h>
-#include <asm/irq-routing.h>
 
 #define __reg16(ADDR) (*(volatile unsigned short *)(ADDR))
 
 #define __get_IFR()    ({ __reg16(0xffc0000c); })
 #define __clr_IFR(M)   do { __reg16(0xffc0000c) = ~(M); wmb(); } while(0)
 
-static void frv_fpga_doirq(struct irq_source *source);
-static void frv_fpga_control(struct irq_group *group, int irq, int on);
 
-/*****************************************************************************/
 /*
- * FPGA IRQ multiplexor
+ * on-motherboard FPGA PIC operations
  */
-static struct irq_source frv_fpga[4] = {
-#define __FPGA(X, M)                                   \
-       [X] = {                                         \
-               .muxname        = "fpga."#X,            \
-               .irqmask        = M,                    \
-               .doirq          = frv_fpga_doirq,       \
-       }
+static void frv_fpga_enable(unsigned int irq)
+{
+       uint16_t imr = __get_IMR();
 
-       __FPGA(0, 0x0028),
-       __FPGA(1, 0x0050),
-       __FPGA(2, 0x1c00),
-       __FPGA(3, 0x6386),
-};
-
-static struct irq_group frv_fpga_irqs = {
-       .first_irq      = IRQ_BASE_FPGA,
-       .control        = frv_fpga_control,
-       .sources = {
-               [ 1] = &frv_fpga[3],
-               [ 2] = &frv_fpga[3],
-               [ 3] = &frv_fpga[0],
-               [ 4] = &frv_fpga[1],
-               [ 5] = &frv_fpga[0],
-               [ 6] = &frv_fpga[1],
-               [ 7] = &frv_fpga[3],
-               [ 8] = &frv_fpga[3],
-               [ 9] = &frv_fpga[3],
-               [10] = &frv_fpga[2],
-               [11] = &frv_fpga[2],
-               [12] = &frv_fpga[2],
-               [13] = &frv_fpga[3],
-               [14] = &frv_fpga[3],
-       },
-};
+       imr &= ~(1 << (irq - IRQ_BASE_FPGA));
 
+       __set_IMR(imr);
+}
 
-static void frv_fpga_control(struct irq_group *group, int index, int on)
+static void frv_fpga_disable(unsigned int irq)
 {
        uint16_t imr = __get_IMR();
 
-       if (on)
-               imr &= ~(1 << index);
-       else
-               imr |= 1 << index;
+       imr |= 1 << (irq - IRQ_BASE_FPGA);
 
        __set_IMR(imr);
 }
 
-static void frv_fpga_doirq(struct irq_source *source)
+static void frv_fpga_ack(unsigned int irq)
+{
+       __clr_IFR(1 << (irq - IRQ_BASE_FPGA));
+}
+
+static void frv_fpga_end(unsigned int irq)
+{
+}
+
+static struct irq_chip frv_fpga_pic = {
+       .name           = "mb93091",
+       .enable         = frv_fpga_enable,
+       .disable        = frv_fpga_disable,
+       .ack            = frv_fpga_ack,
+       .mask           = frv_fpga_disable,
+       .unmask         = frv_fpga_enable,
+       .end            = frv_fpga_end,
+};
+
+/*
+ * FPGA PIC interrupt handler
+ */
+static irqreturn_t fpga_interrupt(int irq, void *_mask, struct pt_regs *regs)
 {
-       uint16_t mask, imr;
+       uint16_t imr, mask = (unsigned long) _mask;
+       irqreturn_t iret = 0;
 
        imr = __get_IMR();
-       mask = source->irqmask & ~imr & __get_IFR();
-       if (mask) {
-               __set_IMR(imr | mask);
-               __clr_IFR(mask);
-               distribute_irqs(&frv_fpga_irqs, mask);
-               __set_IMR(imr);
+       mask = mask & ~imr & __get_IFR();
+
+       /* poll all the triggered IRQs */
+       while (mask) {
+               int irq;
+
+               asm("scan %1,gr0,%0" : "=r"(irq) : "r"(mask));
+               irq = 31 - irq;
+               mask &= ~(1 << irq);
+
+               if (__do_IRQ(IRQ_BASE_FPGA + irq, regs))
+                       iret |= IRQ_HANDLED;
        }
+
+       return iret;
 }
 
+/*
+ * define an interrupt action for each FPGA PIC output
+ * - use dev_id to indicate the FPGA PIC input to output mappings
+ */
+static struct irqaction fpga_irq[4]  = {
+       [0] = {
+               .handler        = fpga_interrupt,
+               .flags          = IRQF_DISABLED | IRQF_SHARED,
+               .mask           = CPU_MASK_NONE,
+               .name           = "fpga.0",
+               .dev_id         = (void *) 0x0028UL,
+       },
+       [1] = {
+               .handler        = fpga_interrupt,
+               .flags          = IRQF_DISABLED | IRQF_SHARED,
+               .mask           = CPU_MASK_NONE,
+               .name           = "fpga.1",
+               .dev_id         = (void *) 0x0050UL,
+       },
+       [2] = {
+               .handler        = fpga_interrupt,
+               .flags          = IRQF_DISABLED | IRQF_SHARED,
+               .mask           = CPU_MASK_NONE,
+               .name           = "fpga.2",
+               .dev_id         = (void *) 0x1c00UL,
+       },
+       [3] = {
+               .handler        = fpga_interrupt,
+               .flags          = IRQF_DISABLED | IRQF_SHARED,
+               .mask           = CPU_MASK_NONE,
+               .name           = "fpga.3",
+               .dev_id         = (void *) 0x6386UL,
+       }
+};
+
+/*
+ * initialise the motherboard FPGA's PIC
+ */
 void __init fpga_init(void)
 {
+       int irq;
+
+       /* all PIC inputs are all set to be low-level driven, apart from the
+        * NMI button (15) which is fixed at falling-edge
+        */
        __set_IMR(0x7ffe);
        __clr_IFR(0x0000);
 
-       frv_irq_route_external(&frv_fpga[0], IRQ_CPU_EXTERNAL0);
-       frv_irq_route_external(&frv_fpga[1], IRQ_CPU_EXTERNAL1);
-       frv_irq_route_external(&frv_fpga[2], IRQ_CPU_EXTERNAL2);
-       frv_irq_route_external(&frv_fpga[3], IRQ_CPU_EXTERNAL3);
-       frv_irq_set_group(&frv_fpga_irqs);
+       for (irq = IRQ_BASE_FPGA + 1; irq <= IRQ_BASE_FPGA + 14; irq++)
+               set_irq_chip_and_handler(irq, &frv_fpga_pic, handle_level_irq);
+
+       set_irq_chip_and_handler(IRQ_FPGA_NMI, &frv_fpga_pic, handle_edge_irq);
+
+       /* the FPGA drives the first four external IRQ inputs on the CPU PIC */
+       setup_irq(IRQ_CPU_EXTERNAL0, &fpga_irq[0]);
+       setup_irq(IRQ_CPU_EXTERNAL1, &fpga_irq[1]);
+       setup_irq(IRQ_CPU_EXTERNAL2, &fpga_irq[2]);
+       setup_irq(IRQ_CPU_EXTERNAL3, &fpga_irq[3]);
 }
index 48b2a6420888c12cc83d52aa46e31c8f84e0119f..f60db7988e78418b8851c424a5576bf24a59cbf5 100644 (file)
@@ -1,6 +1,6 @@
 /* irq-mb93093.c: MB93093 FPGA interrupt handling
  *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
  *
  * This program is free software; you can redistribute it and/or
@@ -24,7 +24,6 @@
 #include <asm/delay.h>
 #include <asm/irq.h>
 #include <asm/irc-regs.h>
-#include <asm/irq-routing.h>
 
 #define __reg16(ADDR) (*(volatile unsigned short *)(__region_CS2 + (ADDR)))
 
 #define __get_IFR()    ({ __reg16(0x02); })
 #define __clr_IFR(M)   do { __reg16(0x02) = ~(M); wmb(); } while(0)
 
-static void frv_fpga_doirq(struct irq_source *source);
-static void frv_fpga_control(struct irq_group *group, int irq, int on);
-
-/*****************************************************************************/
 /*
- * FPGA IRQ multiplexor
+ * off-CPU FPGA PIC operations
  */
-static struct irq_source frv_fpga[4] = {
-#define __FPGA(X, M)                                   \
-       [X] = {                                         \
-               .muxname        = "fpga."#X,            \
-               .irqmask        = M,                    \
-               .doirq          = frv_fpga_doirq,       \
-       }
-
-       __FPGA(0, 0x0700),
-};
+static void frv_fpga_enable(unsigned int irq)
+{
+       uint16_t imr = __get_IMR();
 
-static struct irq_group frv_fpga_irqs = {
-       .first_irq      = IRQ_BASE_FPGA,
-       .control        = frv_fpga_control,
-       .sources = {
-               [ 8] = &frv_fpga[0],
-               [ 9] = &frv_fpga[0],
-               [10] = &frv_fpga[0],
-       },
-};
+       imr &= ~(1 << (irq - IRQ_BASE_FPGA));
 
+       __set_IMR(imr);
+}
 
-static void frv_fpga_control(struct irq_group *group, int index, int on)
+static void frv_fpga_disable(unsigned int irq)
 {
        uint16_t imr = __get_IMR();
 
-       if (on)
-               imr &= ~(1 << index);
-       else
-               imr |= 1 << index;
+       imr |= 1 << (irq - IRQ_BASE_FPGA);
 
        __set_IMR(imr);
 }
 
-static void frv_fpga_doirq(struct irq_source *source)
+static void frv_fpga_ack(unsigned int irq)
+{
+       __clr_IFR(1 << (irq - IRQ_BASE_FPGA));
+}
+
+static void frv_fpga_end(unsigned int irq)
+{
+}
+
+static struct irq_chip frv_fpga_pic = {
+       .name           = "mb93093",
+       .enable         = frv_fpga_enable,
+       .disable        = frv_fpga_disable,
+       .ack            = frv_fpga_ack,
+       .mask           = frv_fpga_disable,
+       .unmask         = frv_fpga_enable,
+       .end            = frv_fpga_end,
+};
+
+/*
+ * FPGA PIC interrupt handler
+ */
+static irqreturn_t fpga_interrupt(int irq, void *_mask, struct pt_regs *regs)
 {
-       uint16_t mask, imr;
+       uint16_t imr, mask = (unsigned long) _mask;
+       irqreturn_t iret = 0;
 
        imr = __get_IMR();
-       mask = source->irqmask & ~imr & __get_IFR();
-       if (mask) {
-               __set_IMR(imr | mask);
-               __clr_IFR(mask);
-               distribute_irqs(&frv_fpga_irqs, mask);
-               __set_IMR(imr);
+       mask = mask & ~imr & __get_IFR();
+
+       /* poll all the triggered IRQs */
+       while (mask) {
+               int irq;
+
+               asm("scan %1,gr0,%0" : "=r"(irq) : "r"(mask));
+               irq = 31 - irq;
+               mask &= ~(1 << irq);
+
+               if (__do_IRQ(IRQ_BASE_FPGA + irq, regs))
+                       iret |= IRQ_HANDLED;
        }
+
+       return iret;
 }
 
+/*
+ * define an interrupt action for each FPGA PIC output
+ * - use dev_id to indicate the FPGA PIC input to output mappings
+ */
+static struct irqaction fpga_irq[1]  = {
+       [0] = {
+               .handler        = fpga_interrupt,
+               .flags          = IRQF_DISABLED,
+               .mask           = CPU_MASK_NONE,
+               .name           = "fpga.0",
+               .dev_id         = (void *) 0x0700UL,
+       }
+};
+
+/*
+ * initialise the motherboard FPGA's PIC
+ */
 void __init fpga_init(void)
 {
+       int irq;
+
+       /* all PIC inputs are all set to be edge triggered */
        __set_IMR(0x0700);
        __clr_IFR(0x0000);
 
-       frv_irq_route_external(&frv_fpga[0], IRQ_CPU_EXTERNAL2);
-       frv_irq_set_group(&frv_fpga_irqs);
+       for (irq = IRQ_BASE_FPGA + 8; irq <= IRQ_BASE_FPGA + 10; irq++)
+               set_irq_chip_and_handler(irq, &frv_fpga_pic, handle_edge_irq);
+
+       /* the FPGA drives external IRQ input #2 on the CPU PIC */
+       setup_irq(IRQ_CPU_EXTERNAL2, &fpga_irq[0]);
 }
index 988d035640e19f6d479c6cdca17827fcc9c0c75e..8ad9abfc7c1355ffc9fe32b9295d0c397d52c973 100644 (file)
@@ -1,6 +1,6 @@
 /* irq-mb93493.c: MB93493 companion chip interrupt handler
  *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
  *
  * This program is free software; you can redistribute it and/or
 #include <asm/delay.h>
 #include <asm/irq.h>
 #include <asm/irc-regs.h>
-#include <asm/irq-routing.h>
 #include <asm/mb93493-irqs.h>
+#include <asm/mb93493-regs.h>
 
-static void frv_mb93493_doirq(struct irq_source *source);
+#define IRQ_ROUTE_ONE(X) (X##_ROUTE << (X - IRQ_BASE_MB93493))
+
+#define IRQ_ROUTING                                    \
+       (IRQ_ROUTE_ONE(IRQ_MB93493_VDC)         |       \
+        IRQ_ROUTE_ONE(IRQ_MB93493_VCC)         |       \
+        IRQ_ROUTE_ONE(IRQ_MB93493_AUDIO_OUT)   |       \
+        IRQ_ROUTE_ONE(IRQ_MB93493_I2C_0)       |       \
+        IRQ_ROUTE_ONE(IRQ_MB93493_I2C_1)       |       \
+        IRQ_ROUTE_ONE(IRQ_MB93493_USB)         |       \
+        IRQ_ROUTE_ONE(IRQ_MB93493_LOCAL_BUS)   |       \
+        IRQ_ROUTE_ONE(IRQ_MB93493_PCMCIA)      |       \
+        IRQ_ROUTE_ONE(IRQ_MB93493_GPIO)        |       \
+        IRQ_ROUTE_ONE(IRQ_MB93493_AUDIO_IN))
 
-/*****************************************************************************/
 /*
- * MB93493 companion chip IRQ multiplexor
+ * daughter board PIC operations
  */
-static struct irq_source frv_mb93493[2] = {
-       [0] = {
-               .muxname                = "mb93493.0",
-               .muxdata                = __region_CS3 + 0x3d0,
-               .doirq                  = frv_mb93493_doirq,
-               .irqmask                = 0x0000,
-       },
-       [1] = {
-               .muxname                = "mb93493.1",
-               .muxdata                = __region_CS3 + 0x3d4,
-               .doirq                  = frv_mb93493_doirq,
-               .irqmask                = 0x0000,
-       },
-};
-
-static void frv_mb93493_control(struct irq_group *group, int index, int on)
+static void frv_mb93493_enable(unsigned int irq)
 {
-       struct irq_source *source;
        uint32_t iqsr;
+       volatile void *piqsr;
 
-       if ((frv_mb93493[0].irqmask & (1 << index)))
-               source = &frv_mb93493[0];
+       if (IRQ_ROUTING & (1 << (irq - IRQ_BASE_MB93493)))
+               piqsr = __addr_MB93493_IQSR(1);
        else
-               source = &frv_mb93493[1];
+               piqsr = __addr_MB93493_IQSR(0);
 
-       iqsr = readl(source->muxdata);
-       if (on)
-               iqsr |= 1 << (index + 16);
+       iqsr = readl(piqsr);
+       iqsr |= 1 << (irq - IRQ_BASE_MB93493 + 16);
+       writel(iqsr, piqsr);
+}
+
+static void frv_mb93493_disable(unsigned int irq)
+{
+       uint32_t iqsr;
+       volatile void *piqsr;
+
+       if (IRQ_ROUTING & (1 << (irq - IRQ_BASE_MB93493)))
+               piqsr = __addr_MB93493_IQSR(1);
        else
-               iqsr &= ~(1 << (index + 16));
+               piqsr = __addr_MB93493_IQSR(0);
 
-       writel(iqsr, source->muxdata);
+       iqsr = readl(piqsr);
+       iqsr &= ~(1 << (irq - IRQ_BASE_MB93493 + 16));
+       writel(iqsr, piqsr);
 }
 
-static struct irq_group frv_mb93493_irqs = {
-       .first_irq      = IRQ_BASE_MB93493,
-       .control        = frv_mb93493_control,
-};
-
-static void frv_mb93493_doirq(struct irq_source *source)
+static void frv_mb93493_ack(unsigned int irq)
 {
-       uint32_t mask = readl(source->muxdata);
-       mask = mask & (mask >> 16) & 0xffff;
+}
 
-       if (mask)
-               distribute_irqs(&frv_mb93493_irqs, mask);
+static void frv_mb93493_end(unsigned int irq)
+{
 }
 
-static void __init mb93493_irq_route(int irq, int source)
+static struct irq_chip frv_mb93493_pic = {
+       .name           = "mb93093",
+       .enable         = frv_mb93493_enable,
+       .disable        = frv_mb93493_disable,
+       .ack            = frv_mb93493_ack,
+       .mask           = frv_mb93493_disable,
+       .unmask         = frv_mb93493_enable,
+       .end            = frv_mb93493_end,
+};
+
+/*
+ * MB93493 PIC interrupt handler
+ */
+static irqreturn_t mb93493_interrupt(int irq, void *_piqsr, struct pt_regs *regs)
 {
-       frv_mb93493[source].irqmask |= 1 << (irq - IRQ_BASE_MB93493);
-       frv_mb93493_irqs.sources[irq - IRQ_BASE_MB93493] = &frv_mb93493[source];
+       volatile void *piqsr = _piqsr;
+       irqreturn_t iret = 0;
+       uint32_t iqsr;
+
+       iqsr = readl(piqsr);
+       iqsr = iqsr & (iqsr >> 16) & 0xffff;
+
+       /* poll all the triggered IRQs */
+       while (iqsr) {
+               int irq;
+
+               asm("scan %1,gr0,%0" : "=r"(irq) : "r"(iqsr));
+               irq = 31 - irq;
+               iqsr &= ~(1 << irq);
+
+               if (__do_IRQ(IRQ_BASE_MB93493 + irq, regs))
+                       iret |= IRQ_HANDLED;
+       }
+
+       return iret;
 }
 
-void __init route_mb93493_irqs(void)
+/*
+ * define an interrupt action for each MB93493 PIC output
+ * - use dev_id to indicate the MB93493 PIC input to output mappings
+ */
+static struct irqaction mb93493_irq[2]  = {
+       [0] = {
+               .handler        = mb93493_interrupt,
+               .flags          = IRQF_DISABLED | IRQF_SHARED,
+               .mask           = CPU_MASK_NONE,
+               .name           = "mb93493.0",
+               .dev_id         = (void *) __addr_MB93493_IQSR(0),
+       },
+       [1] = {
+               .handler        = mb93493_interrupt,
+               .flags          = IRQF_DISABLED | IRQF_SHARED,
+               .mask           = CPU_MASK_NONE,
+               .name           = "mb93493.1",
+               .dev_id         = (void *) __addr_MB93493_IQSR(1),
+       }
+};
+
+/*
+ * initialise the motherboard MB93493's PIC
+ */
+void __init mb93493_init(void)
 {
-       frv_irq_route_external(&frv_mb93493[0], IRQ_CPU_MB93493_0);
-       frv_irq_route_external(&frv_mb93493[1], IRQ_CPU_MB93493_1);
-
-       frv_irq_set_group(&frv_mb93493_irqs);
-
-       mb93493_irq_route(IRQ_MB93493_VDC,              IRQ_MB93493_VDC_ROUTE);
-       mb93493_irq_route(IRQ_MB93493_VCC,              IRQ_MB93493_VCC_ROUTE);
-       mb93493_irq_route(IRQ_MB93493_AUDIO_IN,         IRQ_MB93493_AUDIO_IN_ROUTE);
-       mb93493_irq_route(IRQ_MB93493_I2C_0,            IRQ_MB93493_I2C_0_ROUTE);
-       mb93493_irq_route(IRQ_MB93493_I2C_1,            IRQ_MB93493_I2C_1_ROUTE);
-       mb93493_irq_route(IRQ_MB93493_USB,              IRQ_MB93493_USB_ROUTE);
-       mb93493_irq_route(IRQ_MB93493_LOCAL_BUS,        IRQ_MB93493_LOCAL_BUS_ROUTE);
-       mb93493_irq_route(IRQ_MB93493_PCMCIA,           IRQ_MB93493_PCMCIA_ROUTE);
-       mb93493_irq_route(IRQ_MB93493_GPIO,             IRQ_MB93493_GPIO_ROUTE);
-       mb93493_irq_route(IRQ_MB93493_AUDIO_OUT,        IRQ_MB93493_AUDIO_OUT_ROUTE);
+       int irq;
+
+       for (irq = IRQ_BASE_MB93493 + 0; irq <= IRQ_BASE_MB93493 + 10; irq++)
+               set_irq_chip_and_handler(irq, &frv_mb93493_pic, handle_edge_irq);
+
+       /* the MB93493 drives external IRQ inputs on the CPU PIC */
+       setup_irq(IRQ_CPU_MB93493_0, &mb93493_irq[0]);
+       setup_irq(IRQ_CPU_MB93493_1, &mb93493_irq[1]);
 }
diff --git a/arch/frv/kernel/irq-routing.c b/arch/frv/kernel/irq-routing.c
deleted file mode 100644 (file)
index 53886ad..0000000
+++ /dev/null
@@ -1,291 +0,0 @@
-/* irq-routing.c: IRQ routing
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/serial_reg.h>
-#include <asm/io.h>
-#include <asm/irq-routing.h>
-#include <asm/irc-regs.h>
-#include <asm/serial-regs.h>
-#include <asm/dma.h>
-
-struct irq_level frv_irq_levels[16] = {
-       [0 ... 15] = {
-               .lock   = SPIN_LOCK_UNLOCKED,
-       }
-};
-
-struct irq_group *irq_groups[NR_IRQ_GROUPS];
-
-extern struct irq_group frv_cpu_irqs;
-
-void __init frv_irq_route(struct irq_source *source, int irqlevel)
-{
-       source->level = &frv_irq_levels[irqlevel];
-       source->next = frv_irq_levels[irqlevel].sources;
-       frv_irq_levels[irqlevel].sources = source;
-}
-
-void __init frv_irq_route_external(struct irq_source *source, int irq)
-{
-       int irqlevel = 0;
-
-       switch (irq) {
-       case IRQ_CPU_EXTERNAL0: irqlevel = IRQ_XIRQ0_LEVEL; break;
-       case IRQ_CPU_EXTERNAL1: irqlevel = IRQ_XIRQ1_LEVEL; break;
-       case IRQ_CPU_EXTERNAL2: irqlevel = IRQ_XIRQ2_LEVEL; break;
-       case IRQ_CPU_EXTERNAL3: irqlevel = IRQ_XIRQ3_LEVEL; break;
-       case IRQ_CPU_EXTERNAL4: irqlevel = IRQ_XIRQ4_LEVEL; break;
-       case IRQ_CPU_EXTERNAL5: irqlevel = IRQ_XIRQ5_LEVEL; break;
-       case IRQ_CPU_EXTERNAL6: irqlevel = IRQ_XIRQ6_LEVEL; break;
-       case IRQ_CPU_EXTERNAL7: irqlevel = IRQ_XIRQ7_LEVEL; break;
-       default: BUG();
-       }
-
-       source->level = &frv_irq_levels[irqlevel];
-       source->next = frv_irq_levels[irqlevel].sources;
-       frv_irq_levels[irqlevel].sources = source;
-}
-
-void __init frv_irq_set_group(struct irq_group *group)
-{
-       irq_groups[group->first_irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP] = group;
-}
-
-void distribute_irqs(struct irq_group *group, unsigned long irqmask)
-{
-       struct irqaction *action;
-       int irq;
-
-       while (irqmask) {
-               asm("scan %1,gr0,%0" : "=r"(irq) : "r"(irqmask));
-               if (irq < 0 || irq > 31)
-                       asm volatile("break");
-               irq = 31 - irq;
-
-               irqmask &= ~(1 << irq);
-               action = group->actions[irq];
-
-               irq += group->first_irq;
-
-               if (action) {
-                       int status = 0;
-
-//                     if (!(action->flags & IRQF_DISABLED))
-//                             local_irq_enable();
-
-                       do {
-                               status |= action->flags;
-                               action->handler(irq, action->dev_id, __frame);
-                               action = action->next;
-                       } while (action);
-
-                       if (status & IRQF_SAMPLE_RANDOM)
-                               add_interrupt_randomness(irq);
-                       local_irq_disable();
-               }
-       }
-}
-
-/*****************************************************************************/
-/*
- * CPU UART interrupts
- */
-static void frv_cpuuart_doirq(struct irq_source *source)
-{
-//     uint8_t iir = readb(source->muxdata + UART_IIR * 8);
-//     if ((iir & 0x0f) != UART_IIR_NO_INT)
-               distribute_irqs(&frv_cpu_irqs, source->irqmask);
-}
-
-struct irq_source frv_cpuuart[2] = {
-#define __CPUUART(X, A)                                                \
-       [X] = {                                                 \
-               .muxname        = "uart",                       \
-               .muxdata        = (volatile void __iomem *)(unsigned long)A,\
-               .irqmask        = 1 << IRQ_CPU_UART##X,         \
-               .doirq          = frv_cpuuart_doirq,            \
-       }
-
-       __CPUUART(0, UART0_BASE),
-       __CPUUART(1, UART1_BASE),
-};
-
-/*****************************************************************************/
-/*
- * CPU DMA interrupts
- */
-static void frv_cpudma_doirq(struct irq_source *source)
-{
-       uint32_t cstr = readl(source->muxdata + DMAC_CSTRx);
-       if (cstr & DMAC_CSTRx_INT)
-               distribute_irqs(&frv_cpu_irqs, source->irqmask);
-}
-
-struct irq_source frv_cpudma[8] = {
-#define __CPUDMA(X, A)                                         \
-       [X] = {                                                 \
-               .muxname        = "dma",                        \
-               .muxdata        = (volatile void __iomem *)(unsigned long)A,\
-               .irqmask        = 1 << IRQ_CPU_DMA##X,          \
-               .doirq          = frv_cpudma_doirq,             \
-       }
-
-       __CPUDMA(0, 0xfe000900),
-       __CPUDMA(1, 0xfe000980),
-       __CPUDMA(2, 0xfe000a00),
-       __CPUDMA(3, 0xfe000a80),
-       __CPUDMA(4, 0xfe001000),
-       __CPUDMA(5, 0xfe001080),
-       __CPUDMA(6, 0xfe001100),
-       __CPUDMA(7, 0xfe001180),
-};
-
-/*****************************************************************************/
-/*
- * CPU timer interrupts - can't tell whether they've generated an interrupt or not
- */
-static void frv_cputimer_doirq(struct irq_source *source)
-{
-       distribute_irqs(&frv_cpu_irqs, source->irqmask);
-}
-
-struct irq_source frv_cputimer[3] = {
-#define __CPUTIMER(X)                                          \
-       [X] = {                                                 \
-               .muxname        = "timer",                      \
-               .muxdata        = NULL,                         \
-               .irqmask        = 1 << IRQ_CPU_TIMER##X,        \
-               .doirq          = frv_cputimer_doirq,           \
-       }
-
-       __CPUTIMER(0),
-       __CPUTIMER(1),
-       __CPUTIMER(2),
-};
-
-/*****************************************************************************/
-/*
- * external CPU interrupts - can't tell directly whether they've generated an interrupt or not
- */
-static void frv_cpuexternal_doirq(struct irq_source *source)
-{
-       distribute_irqs(&frv_cpu_irqs, source->irqmask);
-}
-
-struct irq_source frv_cpuexternal[8] = {
-#define __CPUEXTERNAL(X)                                       \
-       [X] = {                                                 \
-               .muxname        = "ext",                        \
-               .muxdata        = NULL,                         \
-               .irqmask        = 1 << IRQ_CPU_EXTERNAL##X,     \
-               .doirq          = frv_cpuexternal_doirq,        \
-       }
-
-       __CPUEXTERNAL(0),
-       __CPUEXTERNAL(1),
-       __CPUEXTERNAL(2),
-       __CPUEXTERNAL(3),
-       __CPUEXTERNAL(4),
-       __CPUEXTERNAL(5),
-       __CPUEXTERNAL(6),
-       __CPUEXTERNAL(7),
-};
-
-#define set_IRR(N,A,B,C,D) __set_IRR(N, (A << 28) | (B << 24) | (C << 20) | (D << 16))
-
-struct irq_group frv_cpu_irqs = {
-       .sources = {
-               [IRQ_CPU_UART0]         = &frv_cpuuart[0],
-               [IRQ_CPU_UART1]         = &frv_cpuuart[1],
-               [IRQ_CPU_TIMER0]        = &frv_cputimer[0],
-               [IRQ_CPU_TIMER1]        = &frv_cputimer[1],
-               [IRQ_CPU_TIMER2]        = &frv_cputimer[2],
-               [IRQ_CPU_DMA0]          = &frv_cpudma[0],
-               [IRQ_CPU_DMA1]          = &frv_cpudma[1],
-               [IRQ_CPU_DMA2]          = &frv_cpudma[2],
-               [IRQ_CPU_DMA3]          = &frv_cpudma[3],
-               [IRQ_CPU_DMA4]          = &frv_cpudma[4],
-               [IRQ_CPU_DMA5]          = &frv_cpudma[5],
-               [IRQ_CPU_DMA6]          = &frv_cpudma[6],
-               [IRQ_CPU_DMA7]          = &frv_cpudma[7],
-               [IRQ_CPU_EXTERNAL0]     = &frv_cpuexternal[0],
-               [IRQ_CPU_EXTERNAL1]     = &frv_cpuexternal[1],
-               [IRQ_CPU_EXTERNAL2]     = &frv_cpuexternal[2],
-               [IRQ_CPU_EXTERNAL3]     = &frv_cpuexternal[3],
-               [IRQ_CPU_EXTERNAL4]     = &frv_cpuexternal[4],
-               [IRQ_CPU_EXTERNAL5]     = &frv_cpuexternal[5],
-               [IRQ_CPU_EXTERNAL6]     = &frv_cpuexternal[6],
-               [IRQ_CPU_EXTERNAL7]     = &frv_cpuexternal[7],
-       },
-};
-
-/*****************************************************************************/
-/*
- * route the CPU's interrupt sources
- */
-void __init route_cpu_irqs(void)
-{
-       frv_irq_set_group(&frv_cpu_irqs);
-
-       __set_IITMR(0, 0x003f0000);     /* DMA0-3, TIMER0-2 IRQ detect levels */
-       __set_IITMR(1, 0x20000000);     /* ERR0-1, UART0-1, DMA4-7 IRQ detect levels */
-
-       /* route UART and error interrupts */
-       frv_irq_route(&frv_cpuuart[0],  IRQ_UART0_LEVEL);
-       frv_irq_route(&frv_cpuuart[1],  IRQ_UART1_LEVEL);
-
-       set_IRR(6, IRQ_GDBSTUB_LEVEL, IRQ_GDBSTUB_LEVEL, IRQ_UART1_LEVEL, IRQ_UART0_LEVEL);
-
-       /* route DMA channel interrupts */
-       frv_irq_route(&frv_cpudma[0],   IRQ_DMA0_LEVEL);
-       frv_irq_route(&frv_cpudma[1],   IRQ_DMA1_LEVEL);
-       frv_irq_route(&frv_cpudma[2],   IRQ_DMA2_LEVEL);
-       frv_irq_route(&frv_cpudma[3],   IRQ_DMA3_LEVEL);
-       frv_irq_route(&frv_cpudma[4],   IRQ_DMA4_LEVEL);
-       frv_irq_route(&frv_cpudma[5],   IRQ_DMA5_LEVEL);
-       frv_irq_route(&frv_cpudma[6],   IRQ_DMA6_LEVEL);
-       frv_irq_route(&frv_cpudma[7],   IRQ_DMA7_LEVEL);
-
-       set_IRR(4, IRQ_DMA3_LEVEL, IRQ_DMA2_LEVEL, IRQ_DMA1_LEVEL, IRQ_DMA0_LEVEL);
-       set_IRR(7, IRQ_DMA7_LEVEL, IRQ_DMA6_LEVEL, IRQ_DMA5_LEVEL, IRQ_DMA4_LEVEL);
-
-       /* route timer interrupts */
-       frv_irq_route(&frv_cputimer[0], IRQ_TIMER0_LEVEL);
-       frv_irq_route(&frv_cputimer[1], IRQ_TIMER1_LEVEL);
-       frv_irq_route(&frv_cputimer[2], IRQ_TIMER2_LEVEL);
-
-       set_IRR(5, 0, IRQ_TIMER2_LEVEL, IRQ_TIMER1_LEVEL, IRQ_TIMER0_LEVEL);
-
-       /* route external interrupts */
-       frv_irq_route(&frv_cpuexternal[0], IRQ_XIRQ0_LEVEL);
-       frv_irq_route(&frv_cpuexternal[1], IRQ_XIRQ1_LEVEL);
-       frv_irq_route(&frv_cpuexternal[2], IRQ_XIRQ2_LEVEL);
-       frv_irq_route(&frv_cpuexternal[3], IRQ_XIRQ3_LEVEL);
-       frv_irq_route(&frv_cpuexternal[4], IRQ_XIRQ4_LEVEL);
-       frv_irq_route(&frv_cpuexternal[5], IRQ_XIRQ5_LEVEL);
-       frv_irq_route(&frv_cpuexternal[6], IRQ_XIRQ6_LEVEL);
-       frv_irq_route(&frv_cpuexternal[7], IRQ_XIRQ7_LEVEL);
-
-       set_IRR(2, IRQ_XIRQ7_LEVEL, IRQ_XIRQ6_LEVEL, IRQ_XIRQ5_LEVEL, IRQ_XIRQ4_LEVEL);
-       set_IRR(3, IRQ_XIRQ3_LEVEL, IRQ_XIRQ2_LEVEL, IRQ_XIRQ1_LEVEL, IRQ_XIRQ0_LEVEL);
-
-#if defined(CONFIG_MB93091_VDK)
-       __set_TM1(0x55550000);          /* XIRQ7-0 all active low */
-#elif defined(CONFIG_MB93093_PDK)
-       __set_TM1(0x15550000);          /* XIRQ7 active high, 6-0 all active low */
-#else
-#error dont know external IRQ trigger levels for this setup
-#endif
-
-} /* end route_cpu_irqs() */
index 08967010be04a5c702ad1d42e9e96e6df47534a3..e1ab9f2e43fb36e01445261a9885ede7052fc6a9 100644 (file)
@@ -1,6 +1,6 @@
 /* irq.c: FRV IRQ handling
  *
- * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2003, 2004, 2006 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
  *
  * This program is free software; you can redistribute it and/or
@@ -9,13 +9,6 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-/*
- * (mostly architecture independent, will move to kernel/irq.c in 2.5.)
- *
- * IRQs are in fact implemented a bit like signal handlers for the kernel.
- * Naturally it's not a 1:1 relation, but there are similarities.
- */
-
 #include <linux/ptrace.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <asm/delay.h>
 #include <asm/irq.h>
 #include <asm/irc-regs.h>
-#include <asm/irq-routing.h>
 #include <asm/gdb-stub.h>
 
-extern void __init fpga_init(void);
-extern void __init route_mb93493_irqs(void);
-
-static void register_irq_proc (unsigned int irq);
+#define set_IRR(N,A,B,C,D) __set_IRR(N, (A << 28) | (B << 24) | (C << 20) | (D << 16))
 
-/*
- * Special irq handlers.
- */
+extern void __init fpga_init(void);
+#ifdef CONFIG_FUJITSU_MB93493
+extern void __init mb93493_init(void);
+#endif
 
-irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs) { return IRQ_HANDLED; }
+#define __reg16(ADDR) (*(volatile unsigned short *)(ADDR))
 
 atomic_t irq_err_count;
 
@@ -64,215 +54,99 @@ atomic_t irq_err_count;
  */
 int show_interrupts(struct seq_file *p, void *v)
 {
-       struct irqaction *action;
-       struct irq_group *group;
+       int i = *(loff_t *) v, cpu;
+       struct irqaction * action;
        unsigned long flags;
-       int level, grp, ix, i, j;
-
-       i = *(loff_t *) v;
-
-       switch (i) {
-       case 0:
-               seq_printf(p, "           ");
-               for_each_online_cpu(j)
-                       seq_printf(p, "CPU%d       ",j);
-
-               seq_putc(p, '\n');
-               break;
 
-       case 1 ... NR_IRQ_GROUPS * NR_IRQ_ACTIONS_PER_GROUP:
-               local_irq_save(flags);
-
-               grp = (i - 1) / NR_IRQ_ACTIONS_PER_GROUP;
-               group = irq_groups[grp];
-               if (!group)
-                       goto skip;
-
-               ix = (i - 1) % NR_IRQ_ACTIONS_PER_GROUP;
-               action = group->actions[ix];
-               if (!action)
-                       goto skip;
-
-               seq_printf(p, "%3d: ", i - 1);
-
-#ifndef CONFIG_SMP
-               seq_printf(p, "%10u ", kstat_irqs(i));
-#else
-               for_each_online_cpu(j)
-                       seq_printf(p, "%10u ", kstat_cpu(j).irqs[i - 1]);
-#endif
-
-               level = group->sources[ix]->level - frv_irq_levels;
-
-               seq_printf(p, " %12s@%x", group->sources[ix]->muxname, level);
-               seq_printf(p, "  %s", action->name);
-
-               for (action = action->next; action; action = action->next)
-                       seq_printf(p, ", %s", action->name);
+       if (i == 0) {
+               char cpuname[12];
 
+               seq_printf(p, "    ");
+               for_each_present_cpu(cpu) {
+                       sprintf(cpuname, "CPU%d", cpu);
+                       seq_printf(p, " %10s", cpuname);
+               }
                seq_putc(p, '\n');
-skip:
-               local_irq_restore(flags);
-               break;
+       }
 
-       case NR_IRQ_GROUPS * NR_IRQ_ACTIONS_PER_GROUP + 1:
-               seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
-               break;
+       if (i < NR_IRQS) {
+               spin_lock_irqsave(&irq_desc[i].lock, flags);
+               action = irq_desc[i].action;
+               if (action) {
+                       seq_printf(p, "%3d: ", i);
+                       for_each_present_cpu(cpu)
+                               seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+                       seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
+                       seq_printf(p, "  %s", action->name);
+                       for (action = action->next;
+                            action;
+                            action = action->next)
+                               seq_printf(p, ", %s", action->name);
+
+                       seq_putc(p, '\n');
+               }
 
-       default:
-               break;
+               spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+       } else if (i == NR_IRQS) {
+               seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count));
        }
 
        return 0;
 }
 
-
 /*
- * Generic enable/disable code: this just calls
- * down into the PIC-specific version for the actual
- * hardware disable after having gotten the irq
- * controller lock.
+ * on-CPU PIC operations
  */
-
-/**
- *     disable_irq_nosync - disable an irq without waiting
- *     @irq: Interrupt to disable
- *
- *     Disable the selected interrupt line.  Disables and Enables are
- *     nested.
- *     Unlike disable_irq(), this function does not ensure existing
- *     instances of the IRQ handler have completed before returning.
- *
- *     This function may be called from IRQ context.
- */
-
-void disable_irq_nosync(unsigned int irq)
+static void frv_cpupic_enable(unsigned int irqlevel)
 {
-       struct irq_source *source;
-       struct irq_group *group;
-       struct irq_level *level;
-       unsigned long flags;
-       int idx = irq & (NR_IRQ_ACTIONS_PER_GROUP - 1);
-
-       group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP];
-       if (!group)
-               BUG();
-
-       source = group->sources[idx];
-       if (!source)
-               BUG();
-
-       level = source->level;
-
-       spin_lock_irqsave(&level->lock, flags);
-
-       if (group->control) {
-               if (!group->disable_cnt[idx]++)
-                       group->control(group, idx, 0);
-       } else if (!level->disable_count++) {
-               __set_MASK(level - frv_irq_levels);
-       }
-
-       spin_unlock_irqrestore(&level->lock, flags);
+       __clr_MASK(irqlevel);
 }
 
-EXPORT_SYMBOL(disable_irq_nosync);
-
-/**
- *     disable_irq - disable an irq and wait for completion
- *     @irq: Interrupt to disable
- *
- *     Disable the selected interrupt line.  Enables and Disables are
- *     nested.
- *     This function waits for any pending IRQ handlers for this interrupt
- *     to complete before returning. If you use this function while
- *     holding a resource the IRQ handler may need you will deadlock.
- *
- *     This function may be called - with care - from IRQ context.
- */
-
-void disable_irq(unsigned int irq)
+static void frv_cpupic_disable(unsigned int irqlevel)
 {
-       disable_irq_nosync(irq);
-
-#ifdef CONFIG_SMP
-       if (!local_irq_count(smp_processor_id())) {
-               do {
-                       barrier();
-               } while (irq_desc[irq].status & IRQ_INPROGRESS);
-       }
-#endif
+       __set_MASK(irqlevel);
 }
 
-EXPORT_SYMBOL(disable_irq);
-
-/**
- *     enable_irq - enable handling of an irq
- *     @irq: Interrupt to enable
- *
- *     Undoes the effect of one call to disable_irq().  If this
- *     matches the last disable, processing of interrupts on this
- *     IRQ line is re-enabled.
- *
- *     This function may be called from IRQ context.
- */
-
-void enable_irq(unsigned int irq)
+static void frv_cpupic_ack(unsigned int irqlevel)
 {
-       struct irq_source *source;
-       struct irq_group *group;
-       struct irq_level *level;
-       unsigned long flags;
-       int idx = irq & (NR_IRQ_ACTIONS_PER_GROUP - 1);
-       int count;
-
-       group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP];
-       if (!group)
-               BUG();
-
-       source = group->sources[idx];
-       if (!source)
-               BUG();
-
-       level = source->level;
-
-       spin_lock_irqsave(&level->lock, flags);
-
-       if (group->control)
-               count = group->disable_cnt[idx];
-       else
-               count = level->disable_count;
-
-       switch (count) {
-       case 1:
-               if (group->control) {
-                       if (group->actions[idx])
-                               group->control(group, idx, 1);
-               } else {
-                       if (level->usage)
-                               __clr_MASK(level - frv_irq_levels);
-               }
-               /* fall-through */
+       __set_MASK(irqlevel);
+       __clr_RC(irqlevel);
+       __clr_IRL();
+}
 
-       default:
-               count--;
-               break;
+static void frv_cpupic_mask(unsigned int irqlevel)
+{
+       __set_MASK(irqlevel);
+}
 
-       case 0:
-               printk("enable_irq(%u) unbalanced from %p\n", irq, __builtin_return_address(0));
-       }
+static void frv_cpupic_mask_ack(unsigned int irqlevel)
+{
+       __set_MASK(irqlevel);
+       __clr_RC(irqlevel);
+       __clr_IRL();
+}
 
-       if (group->control)
-               group->disable_cnt[idx] = count;
-       else
-               level->disable_count = count;
+static void frv_cpupic_unmask(unsigned int irqlevel)
+{
+       __clr_MASK(irqlevel);
+}
 
-       spin_unlock_irqrestore(&level->lock, flags);
+static void frv_cpupic_end(unsigned int irqlevel)
+{
+       __clr_MASK(irqlevel);
 }
 
-EXPORT_SYMBOL(enable_irq);
+static struct irq_chip frv_cpu_pic = {
+       .name           = "cpu",
+       .enable         = frv_cpupic_enable,
+       .disable        = frv_cpupic_disable,
+       .ack            = frv_cpupic_ack,
+       .mask           = frv_cpupic_mask,
+       .mask_ack       = frv_cpupic_mask_ack,
+       .unmask         = frv_cpupic_unmask,
+       .end            = frv_cpupic_end,
+};
 
-/*****************************************************************************/
 /*
  * handles all normal device IRQ's
  * - registers are referred to by the __frame variable (GR28)
@@ -281,463 +155,65 @@ EXPORT_SYMBOL(enable_irq);
  */
 asmlinkage void do_IRQ(void)
 {
-       struct irq_source *source;
-       int level, cpu;
-
        irq_enter();
-
-       level = (__frame->tbr >> 4) & 0xf;
-       cpu = smp_processor_id();
-
-       if ((unsigned long) __frame - (unsigned long) (current + 1) < 512)
-               BUG();
-
-       __set_MASK(level);
-       __clr_RC(level);
-       __clr_IRL();
-
-       kstat_this_cpu.irqs[level]++;
-
-       for (source = frv_irq_levels[level].sources; source; source = source->next)
-               source->doirq(source);
-
-       __clr_MASK(level);
-
+       __do_IRQ(__get_IRL(), __frame);
        irq_exit();
+}
 
-} /* end do_IRQ() */
-
-/*****************************************************************************/
 /*
  * handles all NMIs when not co-opted by the debugger
  * - registers are referred to by the __frame variable (GR28)
  */
 asmlinkage void do_NMI(void)
 {
-} /* end do_NMI() */
-
-/*****************************************************************************/
-/**
- *     request_irq - allocate an interrupt line
- *     @irq: Interrupt line to allocate
- *     @handler: Function to be called when the IRQ occurs
- *     @irqflags: Interrupt type flags
- *     @devname: An ascii name for the claiming device
- *     @dev_id: A cookie passed back to the handler function
- *
- *     This call allocates interrupt resources and enables the
- *     interrupt line and IRQ handling. From the point this
- *     call is made your handler function may be invoked. Since
- *     your handler function must clear any interrupt the board
- *     raises, you must take care both to initialise your hardware
- *     and to set up the interrupt handler in the right order.
- *
- *     Dev_id must be globally unique. Normally the address of the
- *     device data structure is used as the cookie. Since the handler
- *     receives this value it makes sense to use it.
- *
- *     If your interrupt is shared you must pass a non NULL dev_id
- *     as this is required when freeing the interrupt.
- *
- *     Flags:
- *
- *     IRQF_SHARED             Interrupt is shared
- *
- *     IRQF_DISABLED   Disable local interrupts while processing
- *
- *     IRQF_SAMPLE_RANDOM      The interrupt can be used for entropy
- *
- */
-
-int request_irq(unsigned int irq,
-               irqreturn_t (*handler)(int, void *, struct pt_regs *),
-               unsigned long irqflags,
-               const char * devname,
-               void *dev_id)
-{
-       int retval;
-       struct irqaction *action;
-
-#if 1
-       /*
-        * Sanity-check: shared interrupts should REALLY pass in
-        * a real dev-ID, otherwise we'll have trouble later trying
-        * to figure out which interrupt is which (messes up the
-        * interrupt freeing logic etc).
-        */
-       if (irqflags & IRQF_SHARED) {
-               if (!dev_id)
-                       printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n",
-                              devname, (&irq)[-1]);
-       }
-#endif
-
-       if ((irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP) >= NR_IRQ_GROUPS)
-               return -EINVAL;
-       if (!handler)
-               return -EINVAL;
-
-       action = (struct irqaction *) kmalloc(sizeof(struct irqaction), GFP_KERNEL);
-       if (!action)
-               return -ENOMEM;
-
-       action->handler = handler;
-       action->flags = irqflags;
-       action->mask = CPU_MASK_NONE;
-       action->name = devname;
-       action->next = NULL;
-       action->dev_id = dev_id;
-
-       retval = setup_irq(irq, action);
-       if (retval)
-               kfree(action);
-       return retval;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-/**
- *     free_irq - free an interrupt
- *     @irq: Interrupt line to free
- *     @dev_id: Device identity to free
- *
- *     Remove an interrupt handler. The handler is removed and if the
- *     interrupt line is no longer in use by any driver it is disabled.
- *     On a shared IRQ the caller must ensure the interrupt is disabled
- *     on the card it drives before calling this function. The function
- *     does not return until any executing interrupts for this IRQ
- *     have completed.
- *
- *     This function may be called from interrupt context.
- *
- *     Bugs: Attempting to free an irq in a handler for the same irq hangs
- *           the machine.
- */
-
-void free_irq(unsigned int irq, void *dev_id)
-{
-       struct irq_source *source;
-       struct irq_group *group;
-       struct irq_level *level;
-       struct irqaction **p, **pp;
-       unsigned long flags;
-
-       if ((irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP) >= NR_IRQ_GROUPS)
-               return;
-
-       group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP];
-       if (!group)
-               BUG();
-
-       source = group->sources[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)];
-       if (!source)
-               BUG();
-
-       level = source->level;
-       p = &group->actions[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)];
-
-       spin_lock_irqsave(&level->lock, flags);
-
-       for (pp = p; *pp; pp = &(*pp)->next) {
-               struct irqaction *action = *pp;
-
-               if (action->dev_id != dev_id)
-                       continue;
-
-               /* found it - remove from the list of entries */
-               *pp = action->next;
-
-               level->usage--;
-
-               if (p == pp && group->control)
-                       group->control(group, irq & (NR_IRQ_ACTIONS_PER_GROUP - 1), 0);
-
-               if (level->usage == 0)
-                       __set_MASK(level - frv_irq_levels);
-
-               spin_unlock_irqrestore(&level->lock,flags);
-
-#ifdef CONFIG_SMP
-               /* Wait to make sure it's not being used on another CPU */
-               while (desc->status & IRQ_INPROGRESS)
-                       barrier();
-#endif
-               kfree(action);
-               return;
-       }
-}
-
-EXPORT_SYMBOL(free_irq);
-
-/*
- * IRQ autodetection code..
- *
- * This depends on the fact that any interrupt that comes in on to an
- * unassigned IRQ will cause GxICR_DETECT to be set
- */
-
-static DECLARE_MUTEX(probe_sem);
-
-/**
- *     probe_irq_on    - begin an interrupt autodetect
- *
- *     Commence probing for an interrupt. The interrupts are scanned
- *     and a mask of potential interrupt lines is returned.
- *
- */
-
-unsigned long probe_irq_on(void)
-{
-       down(&probe_sem);
-       return 0;
 }
 
-EXPORT_SYMBOL(probe_irq_on);
-
-/*
- * Return a mask of triggered interrupts (this
- * can handle only legacy ISA interrupts).
- */
-
-/**
- *     probe_irq_mask - scan a bitmap of interrupt lines
- *     @val:   mask of interrupts to consider
- *
- *     Scan the ISA bus interrupt lines and return a bitmap of
- *     active interrupts. The interrupt probe logic state is then
- *     returned to its previous value.
- *
- *     Note: we need to scan all the irq's even though we will
- *     only return ISA irq numbers - just so that we reset them
- *     all to a known state.
- */
-unsigned int probe_irq_mask(unsigned long xmask)
-{
-       up(&probe_sem);
-       return 0;
-}
-
-EXPORT_SYMBOL(probe_irq_mask);
-
 /*
- * Return the one interrupt that triggered (this can
- * handle any interrupt source).
- */
-
-/**
- *     probe_irq_off   - end an interrupt autodetect
- *     @xmask: mask of potential interrupts (unused)
- *
- *     Scans the unused interrupt lines and returns the line which
- *     appears to have triggered the interrupt. If no interrupt was
- *     found then zero is returned. If more than one interrupt is
- *     found then minus the first candidate is returned to indicate
- *     their is doubt.
- *
- *     The interrupt probe logic state is returned to its previous
- *     value.
- *
- *     BUGS: When used in a module (which arguably shouldnt happen)
- *     nothing prevents two IRQ probe callers from overlapping. The
- *     results of this are non-optimal.
+ * initialise the interrupt system
  */
-
-int probe_irq_off(unsigned long xmask)
-{
-       up(&probe_sem);
-       return -1;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
-/* this was setup_x86_irq but it seems pretty generic */
-int setup_irq(unsigned int irq, struct irqaction *new)
-{
-       struct irq_source *source;
-       struct irq_group *group;
-       struct irq_level *level;
-       struct irqaction **p, **pp;
-       unsigned long flags;
-
-       group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP];
-       if (!group)
-               BUG();
-
-       source = group->sources[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)];
-       if (!source)
-               BUG();
-
-       level = source->level;
-
-       p = &group->actions[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)];
-
-       /*
-        * Some drivers like serial.c use request_irq() heavily,
-        * so we have to be careful not to interfere with a
-        * running system.
-        */
-       if (new->flags & IRQF_SAMPLE_RANDOM) {
-               /*
-                * This function might sleep, we want to call it first,
-                * outside of the atomic block.
-                * Yes, this might clear the entropy pool if the wrong
-                * driver is attempted to be loaded, without actually
-                * installing a new handler, but is this really a problem,
-                * only the sysadmin is able to do this.
-                */
-               rand_initialize_irq(irq);
-       }
-
-       /* must juggle the interrupt processing stuff with interrupts disabled */
-       spin_lock_irqsave(&level->lock, flags);
-
-       /* can't share interrupts unless all parties agree to */
-       if (level->usage != 0 && !(level->flags & new->flags & IRQF_SHARED)) {
-               spin_unlock_irqrestore(&level->lock,flags);
-               return -EBUSY;
-       }
-
-       /* add new interrupt at end of irq queue */
-       pp = p;
-       while (*pp)
-               pp = &(*pp)->next;
-
-       *pp = new;
-
-       level->usage++;
-       level->flags = new->flags;
-
-       /* turn the interrupts on */
-       if (level->usage == 1)
-               __clr_MASK(level - frv_irq_levels);
-
-       if (p == pp && group->control)
-               group->control(group, irq & (NR_IRQ_ACTIONS_PER_GROUP - 1), 1);
-
-       spin_unlock_irqrestore(&level->lock, flags);
-       register_irq_proc(irq);
-       return 0;
-}
-
-static struct proc_dir_entry * root_irq_dir;
-static struct proc_dir_entry * irq_dir [NR_IRQS];
-
-#define HEX_DIGITS 8
-
-static unsigned int parse_hex_value (const char __user *buffer,
-                                    unsigned long count, unsigned long *ret)
-{
-       unsigned char hexnum [HEX_DIGITS];
-       unsigned long value;
-       int i;
-
-       if (!count)
-               return -EINVAL;
-       if (count > HEX_DIGITS)
-               count = HEX_DIGITS;
-       if (copy_from_user(hexnum, buffer, count))
-               return -EFAULT;
-
-       /*
-        * Parse the first 8 characters as a hex string, any non-hex char
-        * is end-of-string. '00e1', 'e1', '00E1', 'E1' are all the same.
-        */
-       value = 0;
-
-       for (i = 0; i < count; i++) {
-               unsigned int c = hexnum[i];
-
-               switch (c) {
-                       case '0' ... '9': c -= '0'; break;
-                       case 'a' ... 'f': c -= 'a'-10; break;
-                       case 'A' ... 'F': c -= 'A'-10; break;
-               default:
-                       goto out;
-               }
-               value = (value << 4) | c;
-       }
-out:
-       *ret = value;
-       return 0;
-}
-
-
-static int prof_cpu_mask_read_proc (char *page, char **start, off_t off,
-                       int count, int *eof, void *data)
-{
-       unsigned long *mask = (unsigned long *) data;
-       if (count < HEX_DIGITS+1)
-               return -EINVAL;
-       return sprintf (page, "%08lx\n", *mask);
-}
-
-static int prof_cpu_mask_write_proc (struct file *file, const char __user *buffer,
-                                       unsigned long count, void *data)
-{
-       unsigned long *mask = (unsigned long *) data, full_count = count, err;
-       unsigned long new_value;
-
-       show_state();
-       err = parse_hex_value(buffer, count, &new_value);
-       if (err)
-               return err;
-
-       *mask = new_value;
-       return full_count;
-}
-
-#define MAX_NAMELEN 10
-
-static void register_irq_proc (unsigned int irq)
-{
-       char name [MAX_NAMELEN];
-
-       if (!root_irq_dir || irq_dir[irq])
-               return;
-
-       memset(name, 0, MAX_NAMELEN);
-       sprintf(name, "%d", irq);
-
-       /* create /proc/irq/1234 */
-       irq_dir[irq] = proc_mkdir(name, root_irq_dir);
-}
-
-unsigned long prof_cpu_mask = -1;
-
-void init_irq_proc (void)
+void __init init_IRQ(void)
 {
-       struct proc_dir_entry *entry;
-       int i;
+       int level;
 
-       /* create /proc/irq */
-       root_irq_dir = proc_mkdir("irq", NULL);
+       for (level = 1; level <= 14; level++)
+               set_irq_chip_and_handler(level, &frv_cpu_pic,
+                                        handle_level_irq);
 
-       /* create /proc/irq/prof_cpu_mask */
-       entry = create_proc_entry("prof_cpu_mask", 0600, root_irq_dir);
-       if (!entry)
-           return;
+       set_irq_handler(IRQ_CPU_TIMER0, handle_edge_irq);
 
-       entry->nlink = 1;
-       entry->data = (void *)&prof_cpu_mask;
-       entry->read_proc = prof_cpu_mask_read_proc;
-       entry->write_proc = prof_cpu_mask_write_proc;
-
-       /*
-        * Create entries for all existing IRQs.
+       /* set the trigger levels for internal interrupt sources
+        * - timers all falling-edge
+        * - ERR0 is rising-edge
+        * - all others are high-level
         */
-       for (i = 0; i < NR_IRQS; i++)
-               register_irq_proc(i);
-}
+       __set_IITMR(0, 0x003f0000);     /* DMA0-3, TIMER0-2 */
+       __set_IITMR(1, 0x20000000);     /* ERR0-1, UART0-1, DMA4-7 */
+
+       /* route internal interrupts */
+       set_IRR(4, IRQ_DMA3_LEVEL, IRQ_DMA2_LEVEL, IRQ_DMA1_LEVEL,
+               IRQ_DMA0_LEVEL);
+       set_IRR(5, 0, IRQ_TIMER2_LEVEL, IRQ_TIMER1_LEVEL, IRQ_TIMER0_LEVEL);
+       set_IRR(6, IRQ_GDBSTUB_LEVEL, IRQ_GDBSTUB_LEVEL,
+               IRQ_UART1_LEVEL, IRQ_UART0_LEVEL);
+       set_IRR(7, IRQ_DMA7_LEVEL, IRQ_DMA6_LEVEL, IRQ_DMA5_LEVEL,
+               IRQ_DMA4_LEVEL);
+
+       /* route external interrupts */
+       set_IRR(2, IRQ_XIRQ7_LEVEL, IRQ_XIRQ6_LEVEL, IRQ_XIRQ5_LEVEL,
+               IRQ_XIRQ4_LEVEL);
+       set_IRR(3, IRQ_XIRQ3_LEVEL, IRQ_XIRQ2_LEVEL, IRQ_XIRQ1_LEVEL,
+               IRQ_XIRQ0_LEVEL);
+
+#if defined(CONFIG_MB93091_VDK)
+       __set_TM1(0x55550000);          /* XIRQ7-0 all active low */
+#elif defined(CONFIG_MB93093_PDK)
+       __set_TM1(0x15550000);          /* XIRQ7 active high, 6-0 all active low */
+#else
+#error dont know external IRQ trigger levels for this setup
+#endif
 
-/*****************************************************************************/
-/*
- * initialise the interrupt system
- */
-void __init init_IRQ(void)
-{
-       route_cpu_irqs();
        fpga_init();
 #ifdef CONFIG_FUJITSU_MB93493
-       route_mb93493_irqs();
+       mb93493_init();
 #endif
-} /* end init_IRQ() */
+}
index af08ccd4ed6e44bdaf085faf1007404c447557eb..d96a57e5f030a93f4f57b5181d4146a6472a65d0 100644 (file)
@@ -43,7 +43,6 @@
 #include <asm/mb-regs.h>
 #include <asm/mb93493-regs.h>
 #include <asm/gdb-stub.h>
-#include <asm/irq-routing.h>
 #include <asm/io.h>
 
 #ifdef CONFIG_BLK_DEV_INITRD
index 68a77fe3bb40bfccc2b5f7da15bb87e69a32ad1f..3d0284bccb940ba2d62c8c3e9e26f099065ff0b4 100644 (file)
@@ -26,7 +26,6 @@
 #include <asm/timer-regs.h>
 #include <asm/mb-regs.h>
 #include <asm/mb86943a.h>
-#include <asm/irq-routing.h>
 
 #include <linux/timex.h>
 
index 2278c80bd88c277a2d109938b2bda035d5f1f8be..ba587523c015e7755b5e670ec62c96586ead264c 100644 (file)
@@ -15,7 +15,6 @@
 
 #include <asm/io.h>
 #include <asm/smp.h>
-#include <asm/irq-routing.h>
 
 #include "pci-frv.h"
 
index 5cd691e1f8c4ed03eeb4c506fa4eb609c720b4f3..478f3498fcfebdf9ce7aef3c5b758ce7cf12a029 100644 (file)
 
 #ifndef __ASSEMBLY__
 
-#include <asm/irq-routing.h>
-
-#define IRQ_BASE_CPU           (NR_IRQ_ACTIONS_PER_GROUP * 0)
-
-/* IRQ IDs presented to drivers */
-enum {
-       IRQ_CPU__UNUSED = IRQ_BASE_CPU,
-       IRQ_CPU_UART0,
-       IRQ_CPU_UART1,
-       IRQ_CPU_TIMER0,
-       IRQ_CPU_TIMER1,
-       IRQ_CPU_TIMER2,
-       IRQ_CPU_DMA0,
-       IRQ_CPU_DMA1,
-       IRQ_CPU_DMA2,
-       IRQ_CPU_DMA3,
-       IRQ_CPU_DMA4,
-       IRQ_CPU_DMA5,
-       IRQ_CPU_DMA6,
-       IRQ_CPU_DMA7,
-       IRQ_CPU_EXTERNAL0,
-       IRQ_CPU_EXTERNAL1,
-       IRQ_CPU_EXTERNAL2,
-       IRQ_CPU_EXTERNAL3,
-       IRQ_CPU_EXTERNAL4,
-       IRQ_CPU_EXTERNAL5,
-       IRQ_CPU_EXTERNAL6,
-       IRQ_CPU_EXTERNAL7,
-};
-
 /* IRQ to level mappings */
 #define IRQ_GDBSTUB_LEVEL      15
 #define IRQ_UART_LEVEL         13
@@ -82,6 +52,30 @@ enum {
 #define IRQ_XIRQ6_LEVEL                7
 #define IRQ_XIRQ7_LEVEL                8
 
+/* IRQ IDs presented to drivers */
+#define IRQ_CPU__UNUSED                IRQ_BASE_CPU
+#define IRQ_CPU_UART0          (IRQ_BASE_CPU + IRQ_UART0_LEVEL)
+#define IRQ_CPU_UART1          (IRQ_BASE_CPU + IRQ_UART1_LEVEL)
+#define IRQ_CPU_TIMER0         (IRQ_BASE_CPU + IRQ_TIMER0_LEVEL)
+#define IRQ_CPU_TIMER1         (IRQ_BASE_CPU + IRQ_TIMER1_LEVEL)
+#define IRQ_CPU_TIMER2         (IRQ_BASE_CPU + IRQ_TIMER2_LEVEL)
+#define IRQ_CPU_DMA0           (IRQ_BASE_CPU + IRQ_DMA0_LEVEL)
+#define IRQ_CPU_DMA1           (IRQ_BASE_CPU + IRQ_DMA1_LEVEL)
+#define IRQ_CPU_DMA2           (IRQ_BASE_CPU + IRQ_DMA2_LEVEL)
+#define IRQ_CPU_DMA3           (IRQ_BASE_CPU + IRQ_DMA3_LEVEL)
+#define IRQ_CPU_DMA4           (IRQ_BASE_CPU + IRQ_DMA4_LEVEL)
+#define IRQ_CPU_DMA5           (IRQ_BASE_CPU + IRQ_DMA5_LEVEL)
+#define IRQ_CPU_DMA6           (IRQ_BASE_CPU + IRQ_DMA6_LEVEL)
+#define IRQ_CPU_DMA7           (IRQ_BASE_CPU + IRQ_DMA7_LEVEL)
+#define IRQ_CPU_EXTERNAL0      (IRQ_BASE_CPU + IRQ_XIRQ0_LEVEL)
+#define IRQ_CPU_EXTERNAL1      (IRQ_BASE_CPU + IRQ_XIRQ1_LEVEL)
+#define IRQ_CPU_EXTERNAL2      (IRQ_BASE_CPU + IRQ_XIRQ2_LEVEL)
+#define IRQ_CPU_EXTERNAL3      (IRQ_BASE_CPU + IRQ_XIRQ3_LEVEL)
+#define IRQ_CPU_EXTERNAL4      (IRQ_BASE_CPU + IRQ_XIRQ4_LEVEL)
+#define IRQ_CPU_EXTERNAL5      (IRQ_BASE_CPU + IRQ_XIRQ5_LEVEL)
+#define IRQ_CPU_EXTERNAL6      (IRQ_BASE_CPU + IRQ_XIRQ6_LEVEL)
+#define IRQ_CPU_EXTERNAL7      (IRQ_BASE_CPU + IRQ_XIRQ7_LEVEL)
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_CPU_IRQS_H */
index 7581b5a7559a1d507175aaff954ebdd286706343..fc47515822a2d9da8bd43ab2864d8638a6fa7c87 100644 (file)
@@ -26,5 +26,10 @@ typedef struct {
 #error SMP not available on FR-V
 #endif /* CONFIG_SMP */
 
+extern atomic_t irq_err_count;
+static inline void ack_bad_irq(int irq)
+{
+       atomic_inc(&irq_err_count);
+}
 
 #endif
diff --git a/include/asm-frv/irq-routing.h b/include/asm-frv/irq-routing.h
deleted file mode 100644 (file)
index ac3ab90..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-/* irq-routing.h: multiplexed IRQ routing
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_IRQ_ROUTING_H
-#define _ASM_IRQ_ROUTING_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/spinlock.h>
-#include <asm/irq.h>
-
-struct irq_source;
-struct irq_level;
-
-/*
- * IRQ action distribution sets
- */
-struct irq_group {
-       int                     first_irq;      /* first IRQ distributed here */
-       void (*control)(struct irq_group *group, int index, int on);
-
-       struct irqaction        *actions[NR_IRQ_ACTIONS_PER_GROUP];     /* IRQ action chains */
-       struct irq_source       *sources[NR_IRQ_ACTIONS_PER_GROUP];     /* IRQ sources */
-       int                     disable_cnt[NR_IRQ_ACTIONS_PER_GROUP];  /* disable counts */
-};
-
-/*
- * IRQ source manager
- */
-struct irq_source {
-       struct irq_source       *next;
-       struct irq_level        *level;
-       const char              *muxname;
-       volatile void __iomem   *muxdata;
-       unsigned long           irqmask;
-
-       void (*doirq)(struct irq_source *source);
-};
-
-/*
- * IRQ level management (per CPU IRQ priority / entry vector)
- */
-struct irq_level {
-       int                     usage;
-       int                     disable_count;
-       unsigned long           flags;          /* current IRQF_DISABLED and IRQF_SHARED settings */
-       spinlock_t              lock;
-       struct irq_source       *sources;
-};
-
-extern struct irq_level frv_irq_levels[16];
-extern struct irq_group *irq_groups[NR_IRQ_GROUPS];
-
-extern void frv_irq_route(struct irq_source *source, int irqlevel);
-extern void frv_irq_route_external(struct irq_source *source, int irq);
-extern void frv_irq_set_group(struct irq_group *group);
-extern void distribute_irqs(struct irq_group *group, unsigned long irqmask);
-extern void route_cpu_irqs(void);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_IRQ_ROUTING_H */
index 58b619215a50c7e279a310185911b88c2b40bb02..8fefd6b827aab3dea697294d99cec7e4934a4429 100644 (file)
@@ -1,6 +1,6 @@
 /* irq.h: FRV IRQ definitions
  *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
  *
  * This program is free software; you can redistribute it and/or
 #ifndef _ASM_IRQ_H_
 #define _ASM_IRQ_H_
 
-
-/*
- * the system has an on-CPU PIC and another PIC on the FPGA and other PICs on other peripherals,
- * so we do some routing in irq-routing.[ch] to reduce the number of false-positives seen by
- * drivers
- */
-
 /* this number is used when no interrupt has been assigned */
 #define NO_IRQ                         (-1)
 
-#define NR_IRQ_LOG2_ACTIONS_PER_GROUP  5
-#define NR_IRQ_ACTIONS_PER_GROUP       (1 << NR_IRQ_LOG2_ACTIONS_PER_GROUP)
-#define NR_IRQ_GROUPS                  4
-#define NR_IRQS                                (NR_IRQ_ACTIONS_PER_GROUP * NR_IRQ_GROUPS)
+#define NR_IRQS                                48
+#define IRQ_BASE_CPU                   (0 * 16)
+#define IRQ_BASE_FPGA                  (1 * 16)
+#define IRQ_BASE_MB93493               (2 * 16)
 
 /* probe returns a 32-bit IRQ mask:-/ */
-#define MIN_PROBE_IRQ  (NR_IRQS - 32)
+#define MIN_PROBE_IRQ                  (NR_IRQS - 32)
 
+#ifndef __ASSEMBLY__
 static inline int irq_canonicalize(int irq)
 {
        return irq;
 }
-
-extern void disable_irq_nosync(unsigned int irq);
-extern void disable_irq(unsigned int irq);
-extern void enable_irq(unsigned int irq);
-
+#endif
 
 #endif /* _ASM_IRQ_H_ */
index 341bfc52a0eb2520386c4bfe081fa7a28b3486bd..19778c5ba9d651a299483ca28bc201f83d9afe8c 100644 (file)
 #ifndef _ASM_MB93091_FPGA_IRQS_H
 #define _ASM_MB93091_FPGA_IRQS_H
 
-#ifndef __ASSEMBLY__
-
-#include <asm/irq-routing.h>
+#include <asm/irq.h>
 
-#define IRQ_BASE_FPGA          (NR_IRQ_ACTIONS_PER_GROUP * 1)
+#ifndef __ASSEMBLY__
 
 /* IRQ IDs presented to drivers */
 enum {
index 1e0f11c2fcdb6df3fa9709e428d4dbde01c12e30..590266b1a6d32455b5b3bdef99500f163e11338f 100644 (file)
 #ifndef _ASM_MB93093_FPGA_IRQS_H
 #define _ASM_MB93093_FPGA_IRQS_H
 
-#ifndef __ASSEMBLY__
-
-#include <asm/irq-routing.h>
+#include <asm/irq.h>
 
-#define IRQ_BASE_FPGA          (NR_IRQ_ACTIONS_PER_GROUP * 1)
+#ifndef __ASSEMBLY__
 
 /* IRQ IDs presented to drivers */
 enum {
index 15096e731325b4bd821dfc88102cbccd98fcf427..82c7aeddd33354b7373b253687f887b46b58557c 100644 (file)
 #ifndef _ASM_MB93493_IRQS_H
 #define _ASM_MB93493_IRQS_H
 
-#ifndef __ASSEMBLY__
-
-#include <asm/irq-routing.h>
+#include <asm/irq.h>
 
-#define IRQ_BASE_MB93493       (NR_IRQ_ACTIONS_PER_GROUP * 2)
+#ifndef __ASSEMBLY__
 
 /* IRQ IDs presented to drivers */
 enum {
index c54aa9d14468142e17afc51c73cdf6a0ebc8e84c..8a1f6aac8cf1b78dc7fdb15f8bc67a4cf7dc7810 100644 (file)
@@ -15,6 +15,7 @@
 #include <asm/mb-regs.h>
 #include <asm/mb93493-irqs.h>
 
+#define __addr_MB93493(X)      ((volatile unsigned long *)(__region_CS3 + (X)))
 #define __get_MB93493(X)       ({ *(volatile unsigned long *)(__region_CS3 + (X)); })
 
 #define __set_MB93493(X,V)                                             \
@@ -26,6 +27,7 @@ do {                                                                  \
 #define __set_MB93493_STSR(X,V)        __set_MB93493(0x3c0 + (X) * 4, (V))
 #define MB93493_STSR_EN
 
+#define __addr_MB93493_IQSR(X) __addr_MB93493(0x3d0 + (X) * 4)
 #define __get_MB93493_IQSR(X)  __get_MB93493(0x3d0 + (X) * 4)
 #define __set_MB93493_IQSR(X,V)        __set_MB93493(0x3d0 + (X) * 4, (V))