ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
authorH. Nikolaus Schaller <hns@goldelico.com>
Mon, 14 Nov 2016 11:55:15 +0000 (12:55 +0100)
committerTony Lindgren <tony@atomide.com>
Mon, 14 Nov 2016 21:03:21 +0000 (13:03 -0800)
DDR3L is usually specified as

JEDEC standard 1.35V(1.28V~1.45V) & 1.5V(1.425V~1.575V)

Therefore setting smps6 regulator to 1.2V is definitively below
minimum. It appears that real world chips are more forgiving than
data sheets indicate, but let's set the regulator right.

Note: a board that uses other voltages (DDR with 1.5V) can
overwrite by referencing &smps6_reg.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/omap5-board-common.dtsi

index 60a33c4b7b8200bf64f4c2f7faf70bf7454cd26c..4caadb25324977e67c40d4ebde2929cd6782cbf8 100644 (file)
                                smps6_reg: smps6 {
                                        /* VDD_DDR3 - over VDD_SMPS6 */
                                        regulator-name = "smps6";
-                                       regulator-min-microvolt = <1200000>;
-                                       regulator-max-microvolt = <1200000>;
+                                       regulator-min-microvolt = <1350000>;
+                                       regulator-max-microvolt = <1350000>;
                                        regulator-always-on;
                                        regulator-boot-on;
                                };