ARM: dts: NSP: Add BCM958625HR switch ports

Add the layout of the switch ports found on the BCM958625HR reference
board. The CPU port is hooked up to the AMAC0 Ethernet controlelr
adapter, so we also enable it.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 03b8bbeb694fcb65c2abf5db7903b5094a9030dc..4239e58cf97fccc7d0b2bf625e8d28e22104a164 100644 (file)
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -109,3 +109,52 @@
                groups = "nand_grp";
        };
 };
+
+&amac0 {
+       status = "okay";
+};
+
+&srab {
+       compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+       status = "okay";
+
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                       label = "port0";
+                       reg = <0>;
+               };
+
+               port@1 {
+                       label = "port1";
+                       reg = <1>;
+               };
+
+               port@2 {
+                       label = "port2";
+                       reg = <2>;
+               };
+
+               port@3 {
+                       label = "port3";
+                       reg = <3>;
+               };
+
+               port@4 {
+                       label = "port4";
+                       reg = <4>;
+               };
+
+               port@5 {
+                       ethernet = <&amac0>;
+                       label = "cpu";
+                       reg = <5>;
+                       fixed-link {
+                               speed = <1000>;
+                               full-duplex;
+                       };
+               };
+       };
+};