+The pvrusb2 driver
+==================
-$Id$
-Mike Isely <isely@pobox.com>
+Author: Mike Isely <isely@pobox.com>
- pvrusb2 driver
+Background
+----------
-Background:
+This driver is intended for the "Hauppauge WinTV PVR USB 2.0", which
+is a USB 2.0 hosted TV Tuner. This driver is a work in progress.
+Its history started with the reverse-engineering effort by Björn
+Danielsson <pvrusb2@dax.nu> whose web page can be found here:
+http://pvrusb2.dax.nu/
- This driver is intended for the "Hauppauge WinTV PVR USB 2.0", which
- is a USB 2.0 hosted TV Tuner. This driver is a work in progress.
- Its history started with the reverse-engineering effort by Björn
- Danielsson <pvrusb2@dax.nu> whose web page can be found here:
+From there Aurelien Alleaume <slts@free.fr> began an effort to
+create a video4linux compatible driver. I began with Aurelien's
+last known snapshot and evolved the driver to the state it is in
+here.
- http://pvrusb2.dax.nu/
+More information on this driver can be found at:
+http://www.isely.net/pvrusb2.html
- From there Aurelien Alleaume <slts@free.fr> began an effort to
- create a video4linux compatible driver. I began with Aurelien's
- last known snapshot and evolved the driver to the state it is in
- here.
- More information on this driver can be found at:
+This driver has a strong separation of layers. They are very
+roughly:
- http://www.isely.net/pvrusb2.html
+1. Low level wire-protocol implementation with the device.
+2. I2C adaptor implementation and corresponding I2C client drivers
+ implemented elsewhere in V4L.
- This driver has a strong separation of layers. They are very
- roughly:
+3. High level hardware driver implementation which coordinates all
+ activities that ensure correct operation of the device.
- 1a. Low level wire-protocol implementation with the device.
+4. A "context" layer which manages instancing of driver, setup,
+ tear-down, arbitration, and interaction with high level
+ interfaces appropriately as devices are hotplugged in the
+ system.
- 1b. I2C adaptor implementation and corresponding I2C client drivers
- implemented elsewhere in V4L.
-
- 1c. High level hardware driver implementation which coordinates all
- activities that ensure correct operation of the device.
-
- 2. A "context" layer which manages instancing of driver, setup,
- tear-down, arbitration, and interaction with high level
- interfaces appropriately as devices are hotplugged in the
- system.
-
- 3. High level interfaces which glue the driver to various published
- Linux APIs (V4L, sysfs, maybe DVB in the future).
-
- The most important shearing layer is between the top 2 layers. A
- lot of work went into the driver to ensure that any kind of
- conceivable API can be laid on top of the core driver. (Yes, the
- driver internally leverages V4L to do its work but that really has
- nothing to do with the API published by the driver to the outside
- world.) The architecture allows for different APIs to
- simultaneously access the driver. I have a strong sense of fairness
- about APIs and also feel that it is a good design principle to keep
- implementation and interface isolated from each other. Thus while
- right now the V4L high level interface is the most complete, the
- sysfs high level interface will work equally well for similar
- functions, and there's no reason I see right now why it shouldn't be
- possible to produce a DVB high level interface that can sit right
- alongside V4L.
-
- NOTE: Complete documentation on the pvrusb2 driver is contained in
- the html files within the doc directory; these are exactly the same
- as what is on the web site at the time. Browse those files
- (especially the FAQ) before asking questions.
+5. High level interfaces which glue the driver to various published
+ Linux APIs (V4L, sysfs, maybe DVB in the future).
+The most important shearing layer is between the top 2 layers. A
+lot of work went into the driver to ensure that any kind of
+conceivable API can be laid on top of the core driver. (Yes, the
+driver internally leverages V4L to do its work but that really has
+nothing to do with the API published by the driver to the outside
+world.) The architecture allows for different APIs to
+simultaneously access the driver. I have a strong sense of fairness
+about APIs and also feel that it is a good design principle to keep
+implementation and interface isolated from each other. Thus while
+right now the V4L high level interface is the most complete, the
+sysfs high level interface will work equally well for similar
+functions, and there's no reason I see right now why it shouldn't be
+possible to produce a DVB high level interface that can sit right
+alongside V4L.
Building
+--------
- To build these modules essentially amounts to just running "Make",
- but you need the kernel source tree nearby and you will likely also
- want to set a few controlling environment variables first in order
- to link things up with that source tree. Please see the Makefile
- here for comments that explain how to do that.
+To build these modules essentially amounts to just running "Make",
+but you need the kernel source tree nearby and you will likely also
+want to set a few controlling environment variables first in order
+to link things up with that source tree. Please see the Makefile
+here for comments that explain how to do that.
+Source file list / functional overview
+--------------------------------------
-Source file list / functional overview:
+(Note: The term "module" used below generally refers to loosely
+defined functional units within the pvrusb2 driver and bears no
+relation to the Linux kernel's concept of a loadable module.)
- (Note: The term "module" used below generally refers to loosely
- defined functional units within the pvrusb2 driver and bears no
- relation to the Linux kernel's concept of a loadable module.)
-
- pvrusb2-audio.[ch] - This is glue logic that resides between this
+pvrusb2-audio.[ch] - This is glue logic that resides between this
driver and the msp3400.ko I2C client driver (which is found
elsewhere in V4L).
- pvrusb2-context.[ch] - This module implements the context for an
+pvrusb2-context.[ch] - This module implements the context for an
instance of the driver. Everything else eventually ties back to
or is otherwise instanced within the data structures implemented
here. Hotplugging is ultimately coordinated here. All high level
the tuner's frequency through sysfs while simultaneously streaming
video through V4L out to an instance of mplayer).
- pvrusb2-debug.h - This header defines a printk() wrapper and a mask
+pvrusb2-debug.h - This header defines a printk() wrapper and a mask
of debugging bit definitions for the various kinds of debug
messages that can be enabled within the driver.
- pvrusb2-debugifc.[ch] - This module implements a crude command line
+pvrusb2-debugifc.[ch] - This module implements a crude command line
oriented debug interface into the driver. Aside from being part
of the process for implementing manual firmware extraction (see
the pvrusb2 web site mentioned earlier), probably I'm the only one
who has ever used this. It is mainly a debugging aid.
- pvrusb2-eeprom.[ch] - This is glue logic that resides between this
+pvrusb2-eeprom.[ch] - This is glue logic that resides between this
driver the tveeprom.ko module, which is itself implemented
elsewhere in V4L.
- pvrusb2-encoder.[ch] - This module implements all protocol needed to
+pvrusb2-encoder.[ch] - This module implements all protocol needed to
interact with the Conexant mpeg2 encoder chip within the pvrusb2
device. It is a crude echo of corresponding logic in ivtv,
however the design goals (strict isolation) and physical layer
(proxy through USB instead of PCI) are enough different that this
implementation had to be completely different.
- pvrusb2-hdw-internal.h - This header defines the core data structure
+pvrusb2-hdw-internal.h - This header defines the core data structure
in the driver used to track ALL internal state related to control
of the hardware. Nobody outside of the core hardware-handling
modules should have any business using this header. All external
level interfaces are restricted to the API defined in
pvrusb2-hdw.h and NOT this header.
- pvrusb2-hdw.h - This header defines the full internal API for
+pvrusb2-hdw.h - This header defines the full internal API for
controlling the hardware. High level interfaces (e.g. V4L, sysfs)
will work through here.
- pvrusb2-hdw.c - This module implements all the various bits of logic
+pvrusb2-hdw.c - This module implements all the various bits of logic
that handle overall control of a specific pvrusb2 device.
(Policy, instantiation, and arbitration of pvrusb2 devices fall
within the jurisdiction of pvrusb-context not here).
- pvrusb2-i2c-chips-*.c - These modules implement the glue logic to
+pvrusb2-i2c-chips-\*.c - These modules implement the glue logic to
tie together and configure various I2C modules as they attach to
the I2C bus. There are two versions of this file. The "v4l2"
version is intended to be used in-tree alongside V4L, where we
from ivtv or older kernel snapshots (or even the support modules
in the standalone snapshot).
- pvrusb2-i2c-cmd-v4l1.[ch] - This module implements generic V4L1
+pvrusb2-i2c-cmd-v4l1.[ch] - This module implements generic V4L1
compatible commands to the I2C modules. It is here where state
changes inside the pvrusb2 driver are translated into V4L1
commands that are in turn send to the various I2C modules.
- pvrusb2-i2c-cmd-v4l2.[ch] - This module implements generic V4L2
+pvrusb2-i2c-cmd-v4l2.[ch] - This module implements generic V4L2
compatible commands to the I2C modules. It is here where state
changes inside the pvrusb2 driver are translated into V4L2
commands that are in turn send to the various I2C modules.
- pvrusb2-i2c-core.[ch] - This module provides an implementation of a
+pvrusb2-i2c-core.[ch] - This module provides an implementation of a
kernel-friendly I2C adaptor driver, through which other external
I2C client drivers (e.g. msp3400, tuner, lirc) may connect and
operate corresponding chips within the pvrusb2 device. It is
pvrusb2-context, and then ultimately made available to users
through one of the high level interfaces).
- pvrusb2-io.[ch] - This module implements a very low level ring of
+pvrusb2-io.[ch] - This module implements a very low level ring of
transfer buffers, required in order to stream data from the
device. This module is *very* low level. It only operates the
buffers and makes no attempt to define any policy or mechanism for
how such buffers might be used.
- pvrusb2-ioread.[ch] - This module layers on top of pvrusb2-io.[ch]
+pvrusb2-ioread.[ch] - This module layers on top of pvrusb2-io.[ch]
to provide a streaming API usable by a read() system call style of
I/O. Right now this is the only layer on top of pvrusb2-io.[ch],
however the underlying architecture here was intended to allow for
other styles of I/O to be implemented with additional modules, like
mmap()'ed buffers or something even more exotic.
- pvrusb2-main.c - This is the top level of the driver. Module level
+pvrusb2-main.c - This is the top level of the driver. Module level
and USB core entry points are here. This is our "main".
- pvrusb2-sysfs.[ch] - This is the high level interface which ties the
+pvrusb2-sysfs.[ch] - This is the high level interface which ties the
pvrusb2 driver into sysfs. Through this interface you can do
everything with the driver except actually stream data.
- pvrusb2-tuner.[ch] - This is glue logic that resides between this
+pvrusb2-tuner.[ch] - This is glue logic that resides between this
driver and the tuner.ko I2C client driver (which is found
elsewhere in V4L).
- pvrusb2-util.h - This header defines some common macros used
+pvrusb2-util.h - This header defines some common macros used
throughout the driver. These macros are not really specific to
the driver, but they had to go somewhere.
- pvrusb2-v4l2.[ch] - This is the high level interface which ties the
+pvrusb2-v4l2.[ch] - This is the high level interface which ties the
pvrusb2 driver into video4linux. It is through here that V4L
applications can open and operate the driver in the usual V4L
ways. Note that **ALL** V4L functionality is published only
through here and nowhere else.
- pvrusb2-video-*.[ch] - This is glue logic that resides between this
+pvrusb2-video-\*.[ch] - This is glue logic that resides between this
driver and the saa711x.ko I2C client driver (which is found
elsewhere in V4L). Note that saa711x.ko used to be known as
saa7115.ko in ivtv. There are two versions of this; one is
selected depending on the particular saa711[5x].ko that is found.
- pvrusb2.h - This header contains compile time tunable parameters
+pvrusb2.h - This header contains compile time tunable parameters
(and at the moment the driver has very little that needs to be
tuned).
-
-
- -Mike Isely
- isely@pobox.com
-
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff