ARM: dts: Add smc91x GPMC configuration for 2430sdp
authorTony Lindgren <tony@atomide.com>
Thu, 30 Oct 2014 00:16:47 +0000 (17:16 -0700)
committerTony Lindgren <tony@atomide.com>
Thu, 30 Oct 2014 15:50:26 +0000 (08:50 -0700)
Let's use the bootloader values except for the partially configured
wait-pin that does not seem to work.

Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/omap2430-sdp.dts

index 2c90d29b4cad7f166a7961bd882b59e19ff1cc64..05eca2e4430f1032b92caa0bd0651094e552a9f3 100644 (file)
                interrupts = <21 IRQ_TYPE_LEVEL_LOW>;   /* gpio149 */
                reg = <5 0x300 0xf>;
                bank-width = <2>;
-               gpmc,mux-add-data;
-        };
+               gpmc,sync-clk-ps = <0>;
+               gpmc,mux-add-data = <2>;
+               gpmc,device-width = <1>;
+               gpmc,cycle2cycle-samecsen = <1>;
+               gpmc,cycle2cycle-diffcsen = <1>;
+               gpmc,cs-on-ns = <7>;
+               gpmc,cs-rd-off-ns = <233>;
+               gpmc,cs-wr-off-ns = <233>;
+               gpmc,adv-on-ns = <22>;
+               gpmc,adv-rd-off-ns = <60>;
+               gpmc,adv-wr-off-ns = <60>;
+               gpmc,oe-on-ns = <67>;
+               gpmc,oe-off-ns = <210>;
+               gpmc,we-on-ns = <67>;
+               gpmc,we-off-ns = <210>;
+               gpmc,rd-cycle-ns = <233>;
+               gpmc,wr-cycle-ns = <233>;
+               gpmc,access-ns = <233>;
+               gpmc,page-burst-access-ns = <30>;
+               gpmc,bus-turnaround-ns = <30>;
+               gpmc,cycle2cycle-delay-ns = <30>;
+               gpmc,wait-monitoring-ns = <0>;
+               gpmc,clk-activation-ns = <0>;
+               gpmc,wr-data-mux-bus-ns = <0>;
+               gpmc,wr-access-ns = <0>;
+       };
 };