[media] au0828-cards: remove a comment about i2c clock stretching
authorMauro Carvalho Chehab <mchehab@osg.samsung.com>
Mon, 22 Sep 2014 20:48:01 +0000 (17:48 -0300)
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>
Mon, 22 Sep 2014 20:48:01 +0000 (17:48 -0300)
This comment is already at the au0828-i2c where it belongs.
So, remove it from a board's entry. It doesn't make any sense
there, as we're setting the clock to 250kHz there, slowing it
down only at the au0828-i2c.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/usb/au0828/au0828-cards.c

index d229c6dbddb93d1dddd6e2b04da9bec5e1c1c47f..585a8f84228c470f541d6eb7df9ec19db84f52cd 100644 (file)
@@ -73,12 +73,6 @@ struct au0828_board au0828_boards[] = {
                .tuner_type = TUNER_XC5000,
                .tuner_addr = 0x61,
                .has_ir_i2c = 1,
-               /* The au0828 hardware i2c implementation does not properly
-                  support the xc5000's i2c clock stretching.  So we need to
-                  lower the clock frequency enough where the 15us clock
-                  stretch fits inside of a normal clock cycle, or else the
-                  au0828 fails to set the STOP bit.  A 30 KHz clock puts the
-                  clock pulse width at 18us */
                .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
                .input = {
                        {