--- /dev/null
+#ifdef __KERNEL__
+#ifndef _ASM_POWERPC_IRQ_H
+#define _ASM_POWERPC_IRQ_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+
+#include <asm/types.h>
+#include <asm/atomic.h>
+
+/* this number is used when no interrupt has been assigned */
+#define NO_IRQ (-1)
+
+/*
+ * These constants are used for passing information about interrupt
+ * signal polarity and level/edge sensing to the low-level PIC chip
+ * drivers.
+ */
+#define IRQ_SENSE_MASK 0x1
+#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */
+#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */
+
+#define IRQ_POLARITY_MASK 0x2
+#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */
+#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */
+
+/*
+ * IRQ line status macro IRQ_PER_CPU is used
+ */
+#define ARCH_HAS_IRQ_PER_CPU
+
+#define get_irq_desc(irq) (&irq_desc[(irq)])
+
+/* Define a way to iterate across irqs. */
+#define for_each_irq(i) \
+ for ((i) = 0; (i) < NR_IRQS; ++(i))
+
+#ifdef CONFIG_PPC64
+
+/*
+ * Maximum number of interrupt sources that we can handle.
+ */
+#define NR_IRQS 512
+
+/* Interrupt numbers are virtual in case they are sparsely
+ * distributed by the hardware.
+ */
+extern unsigned int virt_irq_to_real_map[NR_IRQS];
+
+/* Create a mapping for a real_irq if it doesn't already exist.
+ * Return the virtual irq as a convenience.
+ */
+int virt_irq_create_mapping(unsigned int real_irq);
+void virt_irq_init(void);
+
+static inline unsigned int virt_irq_to_real(unsigned int virt_irq)
+{
+ return virt_irq_to_real_map[virt_irq];
+}
+
+extern unsigned int real_irq_to_virt_slowpath(unsigned int real_irq);
+
+/*
+ * List of interrupt controllers.
+ */
+#define IC_INVALID 0
+#define IC_OPEN_PIC 1
+#define IC_PPC_XIC 2
+#define IC_BPA_IIC 3
+#define IC_ISERIES 4
+
+extern u64 ppc64_interrupt_controller;
+
+#else /* 32-bit */
+
+#if defined(CONFIG_40x)
+#include <asm/ibm4xx.h>
+
+#ifndef NR_BOARD_IRQS
+#define NR_BOARD_IRQS 0
+#endif
+
+#ifndef UIC_WIDTH /* Number of interrupts per device */
+#define UIC_WIDTH 32
+#endif
+
+#ifndef NR_UICS /* number of UIC devices */
+#define NR_UICS 1
+#endif
+
+#if defined (CONFIG_403)
+/*
+ * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
+ * 32 possible interrupts, a majority of which are not implemented on
+ * all cores. There are six configurable, external interrupt pins and
+ * there are eight internal interrupts for the on-chip serial port
+ * (SPU), DMA controller, and JTAG controller.
+ *
+ */
+
+#define NR_AIC_IRQS 32
+#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS)
+
+#elif !defined (CONFIG_403)
+
+/*
+ * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
+ * possible interrupts as well. There are seven, configurable external
+ * interrupt pins and there are 17 internal interrupts for the on-chip
+ * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
+ *
+ */
+
+
+#define NR_UIC_IRQS UIC_WIDTH
+#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
+#endif
+
+#elif defined(CONFIG_44x)
+#include <asm/ibm44x.h>
+
+#define NR_UIC_IRQS 32
+#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
+
+#elif defined(CONFIG_8xx)
+
+/* Now include the board configuration specific associations.
+*/
+#include <asm/mpc8xx.h>
+
+/* The MPC8xx cores have 16 possible interrupts. There are eight
+ * possible level sensitive interrupts assigned and generated internally
+ * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
+ * There are eight external interrupts (IRQs) that can be configured
+ * as either level or edge sensitive.
+ *
+ * On some implementations, there is also the possibility of an 8259
+ * through the PCI and PCI-ISA bridges.
+ *
+ * We are "flattening" the interrupt vectors of the cascaded CPM
+ * and 8259 interrupt controllers so that we can uniquely identify
+ * any interrupt source with a single integer.
+ */
+#define NR_SIU_INTS 16
+#define NR_CPM_INTS 32
+#ifndef NR_8259_INTS
+#define NR_8259_INTS 0
+#endif
+
+#define SIU_IRQ_OFFSET 0
+#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS)
+#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS)
+
+#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
+
+/* These values must be zero-based and map 1:1 with the SIU configuration.
+ * They are used throughout the 8xx I/O subsystem to generate
+ * interrupt masks, flags, and other control patterns. This is why the
+ * current kernel assumption of the 8259 as the base controller is such
+ * a pain in the butt.
+ */
+#define SIU_IRQ0 (0) /* Highest priority */
+#define SIU_LEVEL0 (1)
+#define SIU_IRQ1 (2)
+#define SIU_LEVEL1 (3)
+#define SIU_IRQ2 (4)
+#define SIU_LEVEL2 (5)
+#define SIU_IRQ3 (6)
+#define SIU_LEVEL3 (7)
+#define SIU_IRQ4 (8)
+#define SIU_LEVEL4 (9)
+#define SIU_IRQ5 (10)
+#define SIU_LEVEL5 (11)
+#define SIU_IRQ6 (12)
+#define SIU_LEVEL6 (13)
+#define SIU_IRQ7 (14)
+#define SIU_LEVEL7 (15)
+
+#define MPC8xx_INT_FEC1 SIU_LEVEL1
+#define MPC8xx_INT_FEC2 SIU_LEVEL3
+
+#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1)
+#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2)
+#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3)
+#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4)
+#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1)
+#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2)
+
+/* The internal interrupts we can configure as we see fit.
+ * My personal preference is CPM at level 2, which puts it above the
+ * MBX PCI/ISA/IDE interrupts.
+ */
+#ifndef PIT_INTERRUPT
+#define PIT_INTERRUPT SIU_LEVEL0
+#endif
+#ifndef CPM_INTERRUPT
+#define CPM_INTERRUPT SIU_LEVEL2
+#endif
+#ifndef PCMCIA_INTERRUPT
+#define PCMCIA_INTERRUPT SIU_LEVEL6
+#endif
+#ifndef DEC_INTERRUPT
+#define DEC_INTERRUPT SIU_LEVEL7
+#endif
+
+/* Some internal interrupt registers use an 8-bit mask for the interrupt
+ * level instead of a number.
+ */
+#define mk_int_int_mask(IL) (1 << (7 - (IL/2)))
+
+#elif defined(CONFIG_83xx)
+#include <asm/mpc83xx.h>
+
+#define NR_IRQS (NR_IPIC_INTS)
+
+#elif defined(CONFIG_85xx)
+/* Now include the board configuration specific associations.
+*/
+#include <asm/mpc85xx.h>
+
+/* The MPC8548 openpic has 48 internal interrupts and 12 external
+ * interrupts.
+ *
+ * We are "flattening" the interrupt vectors of the cascaded CPM
+ * so that we can uniquely identify any interrupt source with a
+ * single integer.
+ */
+#define NR_CPM_INTS 64
+#define NR_EPIC_INTS 60
+#ifndef NR_8259_INTS
+#define NR_8259_INTS 0
+#endif
+#define NUM_8259_INTERRUPTS NR_8259_INTS
+
+#ifndef CPM_IRQ_OFFSET
+#define CPM_IRQ_OFFSET 0
+#endif
+
+#define NR_IRQS (NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS)
+
+/* Internal IRQs on MPC85xx OpenPIC */
+
+#ifndef MPC85xx_OPENPIC_IRQ_OFFSET
+#ifdef CONFIG_CPM2
+#define MPC85xx_OPENPIC_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS)
+#else
+#define MPC85xx_OPENPIC_IRQ_OFFSET 0
+#endif
+#endif
+
+/* Not all of these exist on all MPC85xx implementations */
+#define MPC85xx_IRQ_L2CACHE ( 0 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_ECM ( 1 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DDR ( 2 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_LBIU ( 3 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA0 ( 4 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA1 ( 5 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA2 ( 6 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA3 ( 7 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PCI1 ( 8 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PCI2 ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_ERROR ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_BELL (10 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_TX (11 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_RX (12 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_TX (13 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_RX (14 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC3_TX (15 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC3_RX (16 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC3_ERROR (17 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_ERROR (18 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_TX (19 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_RX (20 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC4_TX (21 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC4_RX (22 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC4_ERROR (23 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_ERROR (24 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_FEC (25 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DUART (26 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_IIC1 (27 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PERFMON (28 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_SEC2 (29 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_CPM (30 + MPC85xx_OPENPIC_IRQ_OFFSET)
+
+/* The 12 external interrupt lines */
+#define MPC85xx_IRQ_EXT0 (48 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT1 (49 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT2 (50 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT3 (51 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT4 (52 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT5 (53 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT6 (54 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT7 (55 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT8 (56 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT9 (57 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT10 (58 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT11 (59 + MPC85xx_OPENPIC_IRQ_OFFSET)
+
+/* CPM related interrupts */
+#define SIU_INT_ERROR ((uint)0x00+CPM_IRQ_OFFSET)
+#define SIU_INT_I2C ((uint)0x01+CPM_IRQ_OFFSET)
+#define SIU_INT_SPI ((uint)0x02+CPM_IRQ_OFFSET)
+#define SIU_INT_RISC ((uint)0x03+CPM_IRQ_OFFSET)
+#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
+#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET)
+#define SIU_INT_USB ((uint)0x0b+CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER1 ((uint)0x0c+CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER2 ((uint)0x0d+CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER3 ((uint)0x0e+CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER4 ((uint)0x0f+CPM_IRQ_OFFSET)
+#define SIU_INT_FCC1 ((uint)0x20+CPM_IRQ_OFFSET)
+#define SIU_INT_FCC2 ((uint)0x21+CPM_IRQ_OFFSET)
+#define SIU_INT_FCC3 ((uint)0x22+CPM_IRQ_OFFSET)
+#define SIU_INT_MCC1 ((uint)0x24+CPM_IRQ_OFFSET)
+#define SIU_INT_MCC2 ((uint)0x25+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET)
+#define SIU_INT_PC15 ((uint)0x30+CPM_IRQ_OFFSET)
+#define SIU_INT_PC14 ((uint)0x31+CPM_IRQ_OFFSET)
+#define SIU_INT_PC13 ((uint)0x32+CPM_IRQ_OFFSET)
+#define SIU_INT_PC12 ((uint)0x33+CPM_IRQ_OFFSET)
+#define SIU_INT_PC11 ((uint)0x34+CPM_IRQ_OFFSET)
+#define SIU_INT_PC10 ((uint)0x35+CPM_IRQ_OFFSET)
+#define SIU_INT_PC9 ((uint)0x36+CPM_IRQ_OFFSET)
+#define SIU_INT_PC8 ((uint)0x37+CPM_IRQ_OFFSET)
+#define SIU_INT_PC7 ((uint)0x38+CPM_IRQ_OFFSET)
+#define SIU_INT_PC6 ((uint)0x39+CPM_IRQ_OFFSET)
+#define SIU_INT_PC5 ((uint)0x3a+CPM_IRQ_OFFSET)
+#define SIU_INT_PC4 ((uint)0x3b+CPM_IRQ_OFFSET)
+#define SIU_INT_PC3 ((uint)0x3c+CPM_IRQ_OFFSET)
+#define SIU_INT_PC2 ((uint)0x3d+CPM_IRQ_OFFSET)
+#define SIU_INT_PC1 ((uint)0x3e+CPM_IRQ_OFFSET)
+#define SIU_INT_PC0 ((uint)0x3f+CPM_IRQ_OFFSET)
+
+#else /* CONFIG_40x + CONFIG_8xx */
+/*
+ * this is the # irq's for all ppc arch's (pmac/chrp/prep)
+ * so it is the max of them all
+ */
+#define NR_IRQS 256
+#define __DO_IRQ_CANON 1
+
+#ifndef CONFIG_8260
+
+#define NUM_8259_INTERRUPTS 16
+
+#else /* CONFIG_8260 */
+
+/* The 8260 has an internal interrupt controller with a maximum of
+ * 64 IRQs. We will use NR_IRQs from above since it is large enough.
+ * Don't be confused by the 8260 documentation where they list an
+ * "interrupt number" and "interrupt vector". We are only interested
+ * in the interrupt vector. There are "reserved" holes where the
+ * vector number increases, but the interrupt number in the table does not.
+ * (Document errata updates have fixed this...make sure you have up to
+ * date processor documentation -- Dan).
+ */
+
+#ifndef CPM_IRQ_OFFSET
+#define CPM_IRQ_OFFSET 0
+#endif
+
+#define NR_CPM_INTS 64
+
+#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET)
+#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET)
+#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET)
+#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET)
+#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET)
+#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET)
+#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET)
+#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET)
+#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET)
+#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET)
+#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET)
+#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET)
+#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET)
+#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET)
+#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET)
+#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET)
+#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET)
+#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET)
+#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET)
+#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET)
+#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET)
+#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET)
+#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET)
+#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET)
+#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET)
+#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET)
+#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET)
+#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET)
+#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET)
+
+#endif /* CONFIG_8260 */
+
+#endif
+
+#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
+/* pedantic: these are long because they are used with set_bit --RR */
+extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+extern atomic_t ppc_n_lost_interrupts;
+
+#endif
+
+/*
+ * Because many systems have two overlapping names spaces for
+ * interrupts (ISA and XICS for example), and the ISA interrupts
+ * have historically not been easy to renumber, we allow ISA
+ * interrupts to take values 0 - 15, and shift up the remaining
+ * interrupts by 0x10.
+ */
+#define NUM_ISA_INTERRUPTS 0x10
+extern int __irq_offset_value;
+
+static inline int irq_offset_up(int irq)
+{
+ return(irq + __irq_offset_value);
+}
+
+static inline int irq_offset_down(int irq)
+{
+ return(irq - __irq_offset_value);
+}
+
+static inline int irq_offset_value(void)
+{
+ return __irq_offset_value;
+}
+
+#ifdef __DO_IRQ_CANON
+extern int ppc_do_canonicalize_irqs;
+#else
+#define ppc_do_canonicalize_irqs 0
+#endif
+
+static __inline__ int irq_canonicalize(int irq)
+{
+ if (ppc_do_canonicalize_irqs && irq == 2)
+ irq = 9;
+ return irq;
+}
+
+extern int distribute_irqs;
+
+struct irqaction;
+struct pt_regs;
+
+#ifdef CONFIG_IRQSTACKS
+/*
+ * Per-cpu stacks for handling hard and soft interrupts.
+ */
+extern struct thread_info *hardirq_ctx[NR_CPUS];
+extern struct thread_info *softirq_ctx[NR_CPUS];
+
+extern void irq_ctx_init(void);
+extern void call_do_softirq(struct thread_info *tp);
+extern int call_handle_IRQ_event(int irq, struct pt_regs *regs,
+ struct irqaction *action, struct thread_info *tp);
+
+#define __ARCH_HAS_DO_SOFTIRQ
+
+#else
+#define irq_ctx_init()
+
+#endif /* CONFIG_IRQSTACKS */
+
+#endif /* _ASM_IRQ_H */
+#endif /* __KERNEL__ */
+++ /dev/null
-#ifdef __KERNEL__
-#ifndef _ASM_IRQ_H
-#define _ASM_IRQ_H
-
-#include <linux/config.h>
-#include <asm/machdep.h> /* ppc_md */
-#include <asm/atomic.h>
-
-/*
- * These constants are used for passing information about interrupt
- * signal polarity and level/edge sensing to the low-level PIC chip
- * drivers.
- */
-#define IRQ_SENSE_MASK 0x1
-#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */
-#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */
-
-#define IRQ_POLARITY_MASK 0x2
-#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */
-#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */
-
-/*
- * IRQ line status macro IRQ_PER_CPU is used
- */
-#define ARCH_HAS_IRQ_PER_CPU
-
-#define get_irq_desc(irq) (&irq_desc[(irq)])
-
-/* Define a way to iterate across irqs. */
-#define for_each_irq(i) \
- for ((i) = 0; (i) < NR_IRQS; ++(i))
-
-#if defined(CONFIG_40x)
-#include <asm/ibm4xx.h>
-
-#ifndef NR_BOARD_IRQS
-#define NR_BOARD_IRQS 0
-#endif
-
-#ifndef UIC_WIDTH /* Number of interrupts per device */
-#define UIC_WIDTH 32
-#endif
-
-#ifndef NR_UICS /* number of UIC devices */
-#define NR_UICS 1
-#endif
-
-#if defined (CONFIG_403)
-/*
- * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
- * 32 possible interrupts, a majority of which are not implemented on
- * all cores. There are six configurable, external interrupt pins and
- * there are eight internal interrupts for the on-chip serial port
- * (SPU), DMA controller, and JTAG controller.
- *
- */
-
-#define NR_AIC_IRQS 32
-#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS)
-
-#elif !defined (CONFIG_403)
-
-/*
- * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
- * possible interrupts as well. There are seven, configurable external
- * interrupt pins and there are 17 internal interrupts for the on-chip
- * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
- *
- */
-
-
-#define NR_UIC_IRQS UIC_WIDTH
-#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-#endif
-static __inline__ int
-irq_canonicalize(int irq)
-{
- return (irq);
-}
-
-#elif defined(CONFIG_44x)
-#include <asm/ibm44x.h>
-
-#define NR_UIC_IRQS 32
-#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-
-static __inline__ int
-irq_canonicalize(int irq)
-{
- return (irq);
-}
-
-#elif defined(CONFIG_8xx)
-
-/* Now include the board configuration specific associations.
-*/
-#include <asm/mpc8xx.h>
-
-/* The MPC8xx cores have 16 possible interrupts. There are eight
- * possible level sensitive interrupts assigned and generated internally
- * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
- * There are eight external interrupts (IRQs) that can be configured
- * as either level or edge sensitive.
- *
- * On some implementations, there is also the possibility of an 8259
- * through the PCI and PCI-ISA bridges.
- *
- * We are "flattening" the interrupt vectors of the cascaded CPM
- * and 8259 interrupt controllers so that we can uniquely identify
- * any interrupt source with a single integer.
- */
-#define NR_SIU_INTS 16
-#define NR_CPM_INTS 32
-#ifndef NR_8259_INTS
-#define NR_8259_INTS 0
-#endif
-
-#define SIU_IRQ_OFFSET 0
-#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS)
-#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS)
-
-#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
-
-/* These values must be zero-based and map 1:1 with the SIU configuration.
- * They are used throughout the 8xx I/O subsystem to generate
- * interrupt masks, flags, and other control patterns. This is why the
- * current kernel assumption of the 8259 as the base controller is such
- * a pain in the butt.
- */
-#define SIU_IRQ0 (0) /* Highest priority */
-#define SIU_LEVEL0 (1)
-#define SIU_IRQ1 (2)
-#define SIU_LEVEL1 (3)
-#define SIU_IRQ2 (4)
-#define SIU_LEVEL2 (5)
-#define SIU_IRQ3 (6)
-#define SIU_LEVEL3 (7)
-#define SIU_IRQ4 (8)
-#define SIU_LEVEL4 (9)
-#define SIU_IRQ5 (10)
-#define SIU_LEVEL5 (11)
-#define SIU_IRQ6 (12)
-#define SIU_LEVEL6 (13)
-#define SIU_IRQ7 (14)
-#define SIU_LEVEL7 (15)
-
-#define MPC8xx_INT_FEC1 SIU_LEVEL1
-#define MPC8xx_INT_FEC2 SIU_LEVEL3
-
-#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1)
-#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2)
-#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3)
-#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4)
-#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1)
-#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2)
-
-/* The internal interrupts we can configure as we see fit.
- * My personal preference is CPM at level 2, which puts it above the
- * MBX PCI/ISA/IDE interrupts.
- */
-#ifndef PIT_INTERRUPT
-#define PIT_INTERRUPT SIU_LEVEL0
-#endif
-#ifndef CPM_INTERRUPT
-#define CPM_INTERRUPT SIU_LEVEL2
-#endif
-#ifndef PCMCIA_INTERRUPT
-#define PCMCIA_INTERRUPT SIU_LEVEL6
-#endif
-#ifndef DEC_INTERRUPT
-#define DEC_INTERRUPT SIU_LEVEL7
-#endif
-
-/* Some internal interrupt registers use an 8-bit mask for the interrupt
- * level instead of a number.
- */
-#define mk_int_int_mask(IL) (1 << (7 - (IL/2)))
-
-/* always the same on 8xx -- Cort */
-static __inline__ int irq_canonicalize(int irq)
-{
- return irq;
-}
-
-#elif defined(CONFIG_83xx)
-#include <asm/mpc83xx.h>
-
-static __inline__ int irq_canonicalize(int irq)
-{
- return irq;
-}
-
-#define NR_IRQS (NR_IPIC_INTS)
-
-#elif defined(CONFIG_85xx)
-/* Now include the board configuration specific associations.
-*/
-#include <asm/mpc85xx.h>
-
-/* The MPC8548 openpic has 48 internal interrupts and 12 external
- * interrupts.
- *
- * We are "flattening" the interrupt vectors of the cascaded CPM
- * so that we can uniquely identify any interrupt source with a
- * single integer.
- */
-#define NR_CPM_INTS 64
-#define NR_EPIC_INTS 60
-#ifndef NR_8259_INTS
-#define NR_8259_INTS 0
-#endif
-#define NUM_8259_INTERRUPTS NR_8259_INTS
-
-#ifndef CPM_IRQ_OFFSET
-#define CPM_IRQ_OFFSET 0
-#endif
-
-#define NR_IRQS (NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS)
-
-/* Internal IRQs on MPC85xx OpenPIC */
-
-#ifndef MPC85xx_OPENPIC_IRQ_OFFSET
-#ifdef CONFIG_CPM2
-#define MPC85xx_OPENPIC_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS)
-#else
-#define MPC85xx_OPENPIC_IRQ_OFFSET 0
-#endif
-#endif
-
-/* Not all of these exist on all MPC85xx implementations */
-#define MPC85xx_IRQ_L2CACHE ( 0 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_ECM ( 1 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_DDR ( 2 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_LBIU ( 3 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_DMA0 ( 4 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_DMA1 ( 5 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_DMA2 ( 6 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_DMA3 ( 7 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_PCI1 ( 8 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_PCI2 ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_RIO_ERROR ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_RIO_BELL (10 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_RIO_TX (11 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_RIO_RX (12 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC1_TX (13 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC1_RX (14 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC3_TX (15 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC3_RX (16 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC3_ERROR (17 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC1_ERROR (18 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC2_TX (19 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC2_RX (20 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC4_TX (21 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC4_RX (22 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC4_ERROR (23 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_TSEC2_ERROR (24 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_FEC (25 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_DUART (26 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_IIC1 (27 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_PERFMON (28 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_SEC2 (29 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_CPM (30 + MPC85xx_OPENPIC_IRQ_OFFSET)
-
-/* The 12 external interrupt lines */
-#define MPC85xx_IRQ_EXT0 (48 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT1 (49 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT2 (50 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT3 (51 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT4 (52 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT5 (53 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT6 (54 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT7 (55 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT8 (56 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT9 (57 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT10 (58 + MPC85xx_OPENPIC_IRQ_OFFSET)
-#define MPC85xx_IRQ_EXT11 (59 + MPC85xx_OPENPIC_IRQ_OFFSET)
-
-/* CPM related interrupts */
-#define SIU_INT_ERROR ((uint)0x00+CPM_IRQ_OFFSET)
-#define SIU_INT_I2C ((uint)0x01+CPM_IRQ_OFFSET)
-#define SIU_INT_SPI ((uint)0x02+CPM_IRQ_OFFSET)
-#define SIU_INT_RISC ((uint)0x03+CPM_IRQ_OFFSET)
-#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
-#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET)
-#define SIU_INT_USB ((uint)0x0b+CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER1 ((uint)0x0c+CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER2 ((uint)0x0d+CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER3 ((uint)0x0e+CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER4 ((uint)0x0f+CPM_IRQ_OFFSET)
-#define SIU_INT_FCC1 ((uint)0x20+CPM_IRQ_OFFSET)
-#define SIU_INT_FCC2 ((uint)0x21+CPM_IRQ_OFFSET)
-#define SIU_INT_FCC3 ((uint)0x22+CPM_IRQ_OFFSET)
-#define SIU_INT_MCC1 ((uint)0x24+CPM_IRQ_OFFSET)
-#define SIU_INT_MCC2 ((uint)0x25+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET)
-#define SIU_INT_PC15 ((uint)0x30+CPM_IRQ_OFFSET)
-#define SIU_INT_PC14 ((uint)0x31+CPM_IRQ_OFFSET)
-#define SIU_INT_PC13 ((uint)0x32+CPM_IRQ_OFFSET)
-#define SIU_INT_PC12 ((uint)0x33+CPM_IRQ_OFFSET)
-#define SIU_INT_PC11 ((uint)0x34+CPM_IRQ_OFFSET)
-#define SIU_INT_PC10 ((uint)0x35+CPM_IRQ_OFFSET)
-#define SIU_INT_PC9 ((uint)0x36+CPM_IRQ_OFFSET)
-#define SIU_INT_PC8 ((uint)0x37+CPM_IRQ_OFFSET)
-#define SIU_INT_PC7 ((uint)0x38+CPM_IRQ_OFFSET)
-#define SIU_INT_PC6 ((uint)0x39+CPM_IRQ_OFFSET)
-#define SIU_INT_PC5 ((uint)0x3a+CPM_IRQ_OFFSET)
-#define SIU_INT_PC4 ((uint)0x3b+CPM_IRQ_OFFSET)
-#define SIU_INT_PC3 ((uint)0x3c+CPM_IRQ_OFFSET)
-#define SIU_INT_PC2 ((uint)0x3d+CPM_IRQ_OFFSET)
-#define SIU_INT_PC1 ((uint)0x3e+CPM_IRQ_OFFSET)
-#define SIU_INT_PC0 ((uint)0x3f+CPM_IRQ_OFFSET)
-
-static __inline__ int irq_canonicalize(int irq)
-{
- return irq;
-}
-
-#else /* CONFIG_40x + CONFIG_8xx */
-/*
- * this is the # irq's for all ppc arch's (pmac/chrp/prep)
- * so it is the max of them all
- */
-#define NR_IRQS 256
-
-#ifndef CONFIG_8260
-
-#define NUM_8259_INTERRUPTS 16
-
-#else /* CONFIG_8260 */
-
-/* The 8260 has an internal interrupt controller with a maximum of
- * 64 IRQs. We will use NR_IRQs from above since it is large enough.
- * Don't be confused by the 8260 documentation where they list an
- * "interrupt number" and "interrupt vector". We are only interested
- * in the interrupt vector. There are "reserved" holes where the
- * vector number increases, but the interrupt number in the table does not.
- * (Document errata updates have fixed this...make sure you have up to
- * date processor documentation -- Dan).
- */
-
-#ifndef CPM_IRQ_OFFSET
-#define CPM_IRQ_OFFSET 0
-#endif
-
-#define NR_CPM_INTS 64
-
-#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET)
-#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET)
-#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET)
-#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET)
-#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET)
-#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET)
-#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET)
-#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET)
-#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET)
-#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET)
-#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET)
-#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET)
-#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET)
-#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET)
-#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET)
-#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET)
-#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET)
-#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET)
-#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET)
-#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET)
-#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET)
-#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET)
-#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET)
-#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET)
-#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET)
-#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET)
-#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET)
-#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET)
-#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET)
-
-#endif /* CONFIG_8260 */
-
-/*
- * This gets called from serial.c, which is now used on
- * powermacs as well as prep/chrp boxes.
- * Prep and chrp both have cascaded 8259 PICs.
- */
-static __inline__ int irq_canonicalize(int irq)
-{
- if (ppc_md.irq_canonicalize)
- return ppc_md.irq_canonicalize(irq);
- return irq;
-}
-
-#endif
-
-#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
-/* pedantic: these are long because they are used with set_bit --RR */
-extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
-extern atomic_t ppc_n_lost_interrupts;
-
-#endif /* _ASM_IRQ_H */
-#endif /* __KERNEL__ */
+++ /dev/null
-#ifdef __KERNEL__
-#ifndef _ASM_IRQ_H
-#define _ASM_IRQ_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-#include <linux/threads.h>
-
-/*
- * Maximum number of interrupt sources that we can handle.
- */
-#define NR_IRQS 512
-
-/* this number is used when no interrupt has been assigned */
-#define NO_IRQ (-1)
-
-/*
- * These constants are used for passing information about interrupt
- * signal polarity and level/edge sensing to the low-level PIC chip
- * drivers.
- */
-#define IRQ_SENSE_MASK 0x1
-#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */
-#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */
-
-#define IRQ_POLARITY_MASK 0x2
-#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */
-#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */
-
-/*
- * IRQ line status macro IRQ_PER_CPU is used
- */
-#define ARCH_HAS_IRQ_PER_CPU
-
-#define get_irq_desc(irq) (&irq_desc[(irq)])
-
-/* Define a way to iterate across irqs. */
-#define for_each_irq(i) \
- for ((i) = 0; (i) < NR_IRQS; ++(i))
-
-/* Interrupt numbers are virtual in case they are sparsely
- * distributed by the hardware.
- */
-extern unsigned int virt_irq_to_real_map[NR_IRQS];
-
-/* Create a mapping for a real_irq if it doesn't already exist.
- * Return the virtual irq as a convenience.
- */
-int virt_irq_create_mapping(unsigned int real_irq);
-void virt_irq_init(void);
-
-static inline unsigned int virt_irq_to_real(unsigned int virt_irq)
-{
- return virt_irq_to_real_map[virt_irq];
-}
-
-extern unsigned int real_irq_to_virt_slowpath(unsigned int real_irq);
-
-/*
- * Because many systems have two overlapping names spaces for
- * interrupts (ISA and XICS for example), and the ISA interrupts
- * have historically not been easy to renumber, we allow ISA
- * interrupts to take values 0 - 15, and shift up the remaining
- * interrupts by 0x10.
- */
-#define NUM_ISA_INTERRUPTS 0x10
-extern int __irq_offset_value;
-
-static inline int irq_offset_up(int irq)
-{
- return(irq + __irq_offset_value);
-}
-
-static inline int irq_offset_down(int irq)
-{
- return(irq - __irq_offset_value);
-}
-
-static inline int irq_offset_value(void)
-{
- return __irq_offset_value;
-}
-
-static __inline__ int irq_canonicalize(int irq)
-{
- return irq;
-}
-
-extern int distribute_irqs;
-
-struct irqaction;
-struct pt_regs;
-
-#ifdef CONFIG_IRQSTACKS
-/*
- * Per-cpu stacks for handling hard and soft interrupts.
- */
-extern struct thread_info *hardirq_ctx[NR_CPUS];
-extern struct thread_info *softirq_ctx[NR_CPUS];
-
-extern void irq_ctx_init(void);
-extern void call_do_softirq(struct thread_info *tp);
-extern int call_handle_IRQ_event(int irq, struct pt_regs *regs,
- struct irqaction *action, struct thread_info *tp);
-
-#define __ARCH_HAS_DO_SOFTIRQ
-
-#else
-#define irq_ctx_init()
-
-#endif /* CONFIG_IRQSTACKS */
-
-#endif /* _ASM_IRQ_H */
-#endif /* __KERNEL__ */
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff