e1000e: fix dma error handling issues
authorAlexander Duyck <alexander.h.duyck@intel.com>
Thu, 19 Mar 2009 01:12:50 +0000 (01:12 +0000)
committerDavid S. Miller <davem@davemloft.net>
Fri, 20 Mar 2009 08:17:20 +0000 (01:17 -0700)
There were a few issues I noticed in e1000e. These include a double free
of the skb if mapping fails, and the fact that context descriptors appear
to be left in the descriptor ring after the failure.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/e1000e/netdev.c

index 402d2dd7d68fb29f27d9d53b93b6785530e0cc46..da876d59a9ca47f3a53bf5fa54b9b79b677074e6 100644 (file)
@@ -574,6 +574,7 @@ static void e1000_put_txbuf(struct e1000_adapter *adapter,
                dev_kfree_skb_any(buffer_info->skb);
                buffer_info->skb = NULL;
        }
+       buffer_info->time_stamp = 0;
 }
 
 static void e1000_print_tx_hang(struct e1000_adapter *adapter)
@@ -678,17 +679,10 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
        }
 
        if (adapter->detect_tx_hung) {
-               /*
-                * Detect a transmit hang in hardware, this serializes the
-                * check with the clearing of time_stamp and movement of i
-                */
+               /* Detect a transmit hang in hardware, this serializes the
+                * check with the clearing of time_stamp and movement of i */
                adapter->detect_tx_hung = 0;
-               /*
-                * read barrier to make sure that the ->dma member and time
-                * stamp are updated fully
-                */
-               smp_rmb();
-               if (tx_ring->buffer_info[eop].dma &&
+               if (tx_ring->buffer_info[eop].time_stamp &&
                    time_after(jiffies, tx_ring->buffer_info[eop].time_stamp
                               + (adapter->tx_timeout_factor * HZ))
                    && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
@@ -3824,39 +3818,41 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
                        unsigned int mss)
 {
        struct e1000_ring *tx_ring = adapter->tx_ring;
+       struct e1000_buffer *buffer_info;
        unsigned int len = skb_headlen(skb);
        unsigned int offset, size, count = 0, i;
        unsigned int f;
-       dma_addr_t map;
+       dma_addr_t *map;
 
        i = tx_ring->next_to_use;
 
        if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
                dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
                adapter->tx_dma_failed++;
-               dev_kfree_skb(skb);
-               return -2;
+               return 0;
        }
 
-       map = skb_shinfo(skb)->dma_maps[0];
+       map = skb_shinfo(skb)->dma_maps;
        offset = 0;
 
        while (len) {
-               struct e1000_buffer *buffer_info = &tx_ring->buffer_info[i];
+               buffer_info = &tx_ring->buffer_info[i];
                size = min(len, max_per_txd);
 
                buffer_info->length = size;
-               /* set time_stamp *before* dma to help avoid a possible race */
                buffer_info->time_stamp = jiffies;
-               buffer_info->dma = map + offset;
                buffer_info->next_to_watch = i;
+               buffer_info->dma = map[0] + offset;
+               count++;
 
                len -= size;
                offset += size;
-               count++;
-               i++;
-               if (i == tx_ring->count)
-                       i = 0;
+
+               if (len) {
+                       i++;
+                       if (i == tx_ring->count)
+                               i = 0;
+               }
        }
 
        for (f = 0; f < nr_frags; f++) {
@@ -3864,37 +3860,29 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 
                frag = &skb_shinfo(skb)->frags[f];
                len = frag->size;
-               map = skb_shinfo(skb)->dma_maps[f + 1];
                offset = 0;
 
                while (len) {
-                       struct e1000_buffer *buffer_info;
+                       i++;
+                       if (i == tx_ring->count)
+                               i = 0;
+
                        buffer_info = &tx_ring->buffer_info[i];
                        size = min(len, max_per_txd);
 
                        buffer_info->length = size;
                        buffer_info->time_stamp = jiffies;
-                       buffer_info->dma = map + offset;
                        buffer_info->next_to_watch = i;
+                       buffer_info->dma = map[f + 1] + offset;
 
                        len -= size;
                        offset += size;
                        count++;
-
-                       i++;
-                       if (i == tx_ring->count)
-                               i = 0;
                }
        }
 
-       if (i == 0)
-               i = tx_ring->count - 1;
-       else
-               i--;
-
        tx_ring->buffer_info[i].skb = skb;
        tx_ring->buffer_info[first].next_to_watch = i;
-       smp_wmb();
 
        return count;
 }
@@ -4145,20 +4133,20 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
        if (skb->protocol == htons(ETH_P_IP))
                tx_flags |= E1000_TX_FLAGS_IPV4;
 
+       /* if count is 0 then mapping error has occured */
        count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
-       if (count < 0) {
-               /* handle pci_map_single() error in e1000_tx_map */
+       if (count) {
+               e1000_tx_queue(adapter, tx_flags, count);
+               netdev->trans_start = jiffies;
+               /* Make sure there is space in the ring for the next send. */
+               e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
+
+       } else {
                dev_kfree_skb_any(skb);
-               return NETDEV_TX_OK;
+               tx_ring->buffer_info[first].time_stamp = 0;
+               tx_ring->next_to_use = first;
        }
 
-       e1000_tx_queue(adapter, tx_flags, count);
-
-       netdev->trans_start = jiffies;
-
-       /* Make sure there is space in the ring for the next send. */
-       e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
-
        return NETDEV_TX_OK;
 }