Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
authorDavid S. Miller <davem@davemloft.net>
Sat, 28 Jun 2008 08:19:40 +0000 (01:19 -0700)
committerDavid S. Miller <davem@davemloft.net>
Sat, 28 Jun 2008 08:19:40 +0000 (01:19 -0700)
Conflicts:

drivers/net/wireless/iwlwifi/iwl4965-base.c

33 files changed:
1  2 
drivers/net/e1000e/netdev.c
drivers/net/igb/igb_main.c
drivers/net/ixgbe/ixgbe_main.c
drivers/net/pcmcia/axnet_cs.c
drivers/net/qla3xxx.c
drivers/net/s2io.c
drivers/net/s2io.h
drivers/net/wireless/b43/main.c
drivers/net/wireless/b43legacy/dma.c
drivers/net/wireless/b43legacy/main.c
drivers/net/wireless/iwlwifi/iwl-scan.c
drivers/net/wireless/iwlwifi/iwl3945-base.c
drivers/net/wireless/rt2x00/rt2500usb.c
drivers/net/wireless/rt2x00/rt2x00.h
drivers/net/wireless/rt2x00/rt2x00dev.c
drivers/net/wireless/rt2x00/rt2x00mac.c
drivers/net/wireless/rt2x00/rt73usb.c
include/linux/netdevice.h
include/net/ipv6.h
include/net/net_namespace.h
net/core/dev.c
net/core/skbuff.c
net/ipv4/ip_fragment.c
net/ipv4/tcp.c
net/ipv4/tcp_ipv4.c
net/ipv6/ip6_input.c
net/ipv6/ipv6_sockglue.c
net/ipv6/reassembly.c
net/ipv6/route.c
net/ipv6/tcp_ipv6.c
net/mac80211/key.c
net/sctp/socket.c
net/unix/af_unix.c

Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
index 5f533b93ad5df4c042f7103a2c0b371879419a32,3e612d0a13e8fc927c766c09507067a0d009a988..069157eea05cfd44f346326e587e569dee5fe720
@@@ -2372,13 -2373,15 +2372,15 @@@ static int b43legacy_op_tx(struct ieee8
        /* DMA-TX is done without a global lock. */
        if (b43legacy_using_pio(dev)) {
                spin_lock_irqsave(&wl->irq_lock, flags);
 -              err = b43legacy_pio_tx(dev, skb, ctl);
 +              err = b43legacy_pio_tx(dev, skb);
                spin_unlock_irqrestore(&wl->irq_lock, flags);
        } else
 -              err = b43legacy_dma_tx(dev, skb, ctl);
 +              err = b43legacy_dma_tx(dev, skb);
  out:
-       if (unlikely(err))
-               return NETDEV_TX_BUSY;
+       if (unlikely(err)) {
+               /* Drop the packet. */
+               dev_kfree_skb_any(skb);
+       }
        return NETDEV_TX_OK;
  }
  
index 5ca181f7125dd81d55c16767ba766c59b4d0ab96,0000000000000000000000000000000000000000..5b420b43af5cb8b067ed5354eec768e002b65b00
mode 100644,000000..100644
--- /dev/null
@@@ -1,921 -1,0 +1,924 @@@
-                      (priv->scan_bands == 2) ? "2.4" : "5.2",
 +/******************************************************************************
 + *
 + * GPL LICENSE SUMMARY
 + *
 + * Copyright(c) 2008 Intel Corporation. All rights reserved.
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of version 2 of the GNU General Public License as
 + * published by the Free Software Foundation.
 + *
 + * This program is distributed in the hope that it will be useful, but
 + * WITHOUT ANY WARRANTY; without even the implied warranty of
 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 + * General Public License for more details.
 + *
 + * You should have received a copy of the GNU General Public License
 + * along with this program; if not, write to the Free Software
 + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 + * USA
 + *
 + * The full GNU General Public License is included in this distribution
 + * in the file called LICENSE.GPL.
 + *
 + * Contact Information:
 + * Tomas Winkler <tomas.winkler@intel.com>
 + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 + *****************************************************************************/
 +#include <net/mac80211.h>
 +#include <linux/etherdevice.h>
 +
 +#include "iwl-eeprom.h"
 +#include "iwl-dev.h"
 +#include "iwl-core.h"
 +#include "iwl-sta.h"
 +#include "iwl-io.h"
 +#include "iwl-helpers.h"
 +
 +/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
 + * sending probe req.  This should be set long enough to hear probe responses
 + * from more than one AP.  */
 +#define IWL_ACTIVE_DWELL_TIME_24    (20)       /* all times in msec */
 +#define IWL_ACTIVE_DWELL_TIME_52    (10)
 +
 +/* For faster active scanning, scan will move to the next channel if fewer than
 + * PLCP_QUIET_THRESH packets are heard on this channel within
 + * ACTIVE_QUIET_TIME after sending probe request.  This shortens the dwell
 + * time if it's a quiet channel (nothing responded to our probe, and there's
 + * no other traffic).
 + * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
 +#define IWL_PLCP_QUIET_THRESH       __constant_cpu_to_le16(1)  /* packets */
 +#define IWL_ACTIVE_QUIET_TIME       __constant_cpu_to_le16(5)  /* msec */
 +
 +/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
 + * Must be set longer than active dwell time.
 + * For the most reliable scan, set > AP beacon interval (typically 100msec). */
 +#define IWL_PASSIVE_DWELL_TIME_24   (20)       /* all times in msec */
 +#define IWL_PASSIVE_DWELL_TIME_52   (10)
 +#define IWL_PASSIVE_DWELL_BASE      (100)
 +#define IWL_CHANNEL_TUNE_TIME       5
 +
 +static int scan_tx_ant[3] = {
 +      RATE_MCS_ANT_A_MSK, RATE_MCS_ANT_B_MSK, RATE_MCS_ANT_C_MSK
 +};
 +
 +static int iwl_is_empty_essid(const char *essid, int essid_len)
 +{
 +      /* Single white space is for Linksys APs */
 +      if (essid_len == 1 && essid[0] == ' ')
 +              return 1;
 +
 +      /* Otherwise, if the entire essid is 0, we assume it is hidden */
 +      while (essid_len) {
 +              essid_len--;
 +              if (essid[essid_len] != '\0')
 +                      return 0;
 +      }
 +
 +      return 1;
 +}
 +
 +
 +
 +const char *iwl_escape_essid(const char *essid, u8 essid_len)
 +{
 +      static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
 +      const char *s = essid;
 +      char *d = escaped;
 +
 +      if (iwl_is_empty_essid(essid, essid_len)) {
 +              memcpy(escaped, "<hidden>", sizeof("<hidden>"));
 +              return escaped;
 +      }
 +
 +      essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
 +      while (essid_len--) {
 +              if (*s == '\0') {
 +                      *d++ = '\\';
 +                      *d++ = '0';
 +                      s++;
 +              } else
 +                      *d++ = *s++;
 +      }
 +      *d = '\0';
 +      return escaped;
 +}
 +EXPORT_SYMBOL(iwl_escape_essid);
 +
 +/**
 + * iwl_scan_cancel - Cancel any currently executing HW scan
 + *
 + * NOTE: priv->mutex is not required before calling this function
 + */
 +int iwl_scan_cancel(struct iwl_priv *priv)
 +{
 +      if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
 +              clear_bit(STATUS_SCANNING, &priv->status);
 +              return 0;
 +      }
 +
 +      if (test_bit(STATUS_SCANNING, &priv->status)) {
 +              if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
 +                      IWL_DEBUG_SCAN("Queuing scan abort.\n");
 +                      set_bit(STATUS_SCAN_ABORTING, &priv->status);
 +                      queue_work(priv->workqueue, &priv->abort_scan);
 +
 +              } else
 +                      IWL_DEBUG_SCAN("Scan abort already in progress.\n");
 +
 +              return test_bit(STATUS_SCANNING, &priv->status);
 +      }
 +
 +      return 0;
 +}
 +EXPORT_SYMBOL(iwl_scan_cancel);
 +/**
 + * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
 + * @ms: amount of time to wait (in milliseconds) for scan to abort
 + *
 + * NOTE: priv->mutex must be held before calling this function
 + */
 +int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
 +{
 +      unsigned long now = jiffies;
 +      int ret;
 +
 +      ret = iwl_scan_cancel(priv);
 +      if (ret && ms) {
 +              mutex_unlock(&priv->mutex);
 +              while (!time_after(jiffies, now + msecs_to_jiffies(ms)) &&
 +                              test_bit(STATUS_SCANNING, &priv->status))
 +                      msleep(1);
 +              mutex_lock(&priv->mutex);
 +
 +              return test_bit(STATUS_SCANNING, &priv->status);
 +      }
 +
 +      return ret;
 +}
 +EXPORT_SYMBOL(iwl_scan_cancel_timeout);
 +
 +static int iwl_send_scan_abort(struct iwl_priv *priv)
 +{
 +      int ret = 0;
 +      struct iwl_rx_packet *res;
 +      struct iwl_host_cmd cmd = {
 +              .id = REPLY_SCAN_ABORT_CMD,
 +              .meta.flags = CMD_WANT_SKB,
 +      };
 +
 +      /* If there isn't a scan actively going on in the hardware
 +       * then we are in between scan bands and not actually
 +       * actively scanning, so don't send the abort command */
 +      if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
 +              clear_bit(STATUS_SCAN_ABORTING, &priv->status);
 +              return 0;
 +      }
 +
 +      ret = iwl_send_cmd_sync(priv, &cmd);
 +      if (ret) {
 +              clear_bit(STATUS_SCAN_ABORTING, &priv->status);
 +              return ret;
 +      }
 +
 +      res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
 +      if (res->u.status != CAN_ABORT_STATUS) {
 +              /* The scan abort will return 1 for success or
 +               * 2 for "failure".  A failure condition can be
 +               * due to simply not being in an active scan which
 +               * can occur if we send the scan abort before we
 +               * the microcode has notified us that a scan is
 +               * completed. */
 +              IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
 +              clear_bit(STATUS_SCAN_ABORTING, &priv->status);
 +              clear_bit(STATUS_SCAN_HW, &priv->status);
 +      }
 +
 +      dev_kfree_skb_any(cmd.meta.u.skb);
 +
 +      return ret;
 +}
 +
 +
 +/* Service response to REPLY_SCAN_CMD (0x80) */
 +static void iwl_rx_reply_scan(struct iwl_priv *priv,
 +                            struct iwl_rx_mem_buffer *rxb)
 +{
 +#ifdef CONFIG_IWLWIFI_DEBUG
 +      struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 +      struct iwl_scanreq_notification *notif =
 +          (struct iwl_scanreq_notification *)pkt->u.raw;
 +
 +      IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
 +#endif
 +}
 +
 +/* Service SCAN_START_NOTIFICATION (0x82) */
 +static void iwl_rx_scan_start_notif(struct iwl_priv *priv,
 +                                  struct iwl_rx_mem_buffer *rxb)
 +{
 +      struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 +      struct iwl_scanstart_notification *notif =
 +          (struct iwl_scanstart_notification *)pkt->u.raw;
 +      priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
 +      IWL_DEBUG_SCAN("Scan start: "
 +                     "%d [802.11%s] "
 +                     "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
 +                     notif->channel,
 +                     notif->band ? "bg" : "a",
 +                     notif->tsf_high,
 +                     notif->tsf_low, notif->status, notif->beacon_timer);
 +}
 +
 +/* Service SCAN_RESULTS_NOTIFICATION (0x83) */
 +static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
 +                                    struct iwl_rx_mem_buffer *rxb)
 +{
 +#ifdef CONFIG_IWLWIFI_DEBUG
 +      struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 +      struct iwl_scanresults_notification *notif =
 +          (struct iwl_scanresults_notification *)pkt->u.raw;
 +
 +      IWL_DEBUG_SCAN("Scan ch.res: "
 +                     "%d [802.11%s] "
 +                     "(TSF: 0x%08X:%08X) - %d "
 +                     "elapsed=%lu usec (%dms since last)\n",
 +                     notif->channel,
 +                     notif->band ? "bg" : "a",
 +                     le32_to_cpu(notif->tsf_high),
 +                     le32_to_cpu(notif->tsf_low),
 +                     le32_to_cpu(notif->statistics[0]),
 +                     le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf,
 +                     jiffies_to_msecs(elapsed_jiffies
 +                                      (priv->last_scan_jiffies, jiffies)));
 +#endif
 +
 +      priv->last_scan_jiffies = jiffies;
 +      priv->next_scan_jiffies = 0;
 +}
 +
 +/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
 +static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 +                                     struct iwl_rx_mem_buffer *rxb)
 +{
 +      struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 +      struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
 +
 +      IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
 +                     scan_notif->scanned_channels,
 +                     scan_notif->tsf_low,
 +                     scan_notif->tsf_high, scan_notif->status);
 +
 +      /* The HW is no longer scanning */
 +      clear_bit(STATUS_SCAN_HW, &priv->status);
 +
 +      /* The scan completion notification came in, so kill that timer... */
 +      cancel_delayed_work(&priv->scan_check);
 +
 +      IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
-       /* Remove this scanned band from the list
-        * of pending bands to scan */
-       priv->scan_bands--;
++                     (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
++                                              "2.4" : "5.2",
 +                     jiffies_to_msecs(elapsed_jiffies
 +                                      (priv->scan_pass_start, jiffies)));
 +
-               if (priv->scan_bands > 0)
++      /* Remove this scanned band from the list of pending
++       * bands to scan, band G precedes A in order of scanning
++       * as seen in iwl_bg_request_scan */
++      if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
++              priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
++      else if (priv->scan_bands &  BIT(IEEE80211_BAND_5GHZ))
++              priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
 +
 +      /* If a request to abort was given, or the scan did not succeed
 +       * then we reset the scan state machine and terminate,
 +       * re-queuing another scan if one has been requested */
 +      if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
 +              IWL_DEBUG_INFO("Aborted scan completed.\n");
 +              clear_bit(STATUS_SCAN_ABORTING, &priv->status);
 +      } else {
 +              /* If there are more bands on this scan pass reschedule */
-                       IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
++              if (priv->scan_bands)
 +                      goto reschedule;
 +      }
 +
 +      priv->last_scan_jiffies = jiffies;
 +      priv->next_scan_jiffies = 0;
 +      IWL_DEBUG_INFO("Setting scan to off\n");
 +
 +      clear_bit(STATUS_SCANNING, &priv->status);
 +
 +      IWL_DEBUG_INFO("Scan took %dms\n",
 +              jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
 +
 +      queue_work(priv->workqueue, &priv->scan_completed);
 +
 +      return;
 +
 +reschedule:
 +      priv->scan_pass_start = jiffies;
 +      queue_work(priv->workqueue, &priv->request_scan);
 +}
 +
 +void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
 +{
 +      /* scan handlers */
 +      priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan;
 +      priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif;
 +      priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
 +                                      iwl_rx_scan_results_notif;
 +      priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
 +                                      iwl_rx_scan_complete_notif;
 +}
 +EXPORT_SYMBOL(iwl_setup_rx_scan_handlers);
 +
 +static inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
 +                                              enum ieee80211_band band)
 +{
 +      if (band == IEEE80211_BAND_5GHZ)
 +              return IWL_ACTIVE_DWELL_TIME_52;
 +      else
 +              return IWL_ACTIVE_DWELL_TIME_24;
 +}
 +
 +static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
 +                                        enum ieee80211_band band)
 +{
 +      u16 active = iwl_get_active_dwell_time(priv, band);
 +      u16 passive = (band != IEEE80211_BAND_5GHZ) ?
 +          IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
 +          IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
 +
 +      if (iwl_is_associated(priv)) {
 +              /* If we're associated, we clamp the maximum passive
 +               * dwell time to be 98% of the beacon interval (minus
 +               * 2 * channel tune time) */
 +              passive = priv->beacon_int;
 +              if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
 +                      passive = IWL_PASSIVE_DWELL_BASE;
 +              passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
 +      }
 +
 +      if (passive <= active)
 +              passive = active + 1;
 +
 +      return passive;
 +}
 +
 +static int iwl_get_channels_for_scan(struct iwl_priv *priv,
 +                                   enum ieee80211_band band,
 +                                   u8 is_active, u8 direct_mask,
 +                                   struct iwl_scan_channel *scan_ch)
 +{
 +      const struct ieee80211_channel *channels = NULL;
 +      const struct ieee80211_supported_band *sband;
 +      const struct iwl_channel_info *ch_info;
 +      u16 passive_dwell = 0;
 +      u16 active_dwell = 0;
 +      int added, i;
 +
 +      sband = iwl_get_hw_mode(priv, band);
 +      if (!sband)
 +              return 0;
 +
 +      channels = sband->channels;
 +
 +      active_dwell = iwl_get_active_dwell_time(priv, band);
 +      passive_dwell = iwl_get_passive_dwell_time(priv, band);
 +
 +      for (i = 0, added = 0; i < sband->n_channels; i++) {
 +              if (channels[i].flags & IEEE80211_CHAN_DISABLED)
 +                      continue;
 +
 +              scan_ch->channel =
 +                      ieee80211_frequency_to_channel(channels[i].center_freq);
 +
 +              ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
 +              if (!is_channel_valid(ch_info)) {
-       priv->scan_bands = 2;
++                      IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
 +                                     scan_ch->channel);
 +                      continue;
 +              }
 +
 +              if (!is_active || is_channel_passive(ch_info) ||
 +                  (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
 +                      scan_ch->type = 0;
 +              else
 +                      scan_ch->type = 1;
 +
 +              if (scan_ch->type & 1)
 +                      scan_ch->type |= (direct_mask << 1);
 +
 +              scan_ch->active_dwell = cpu_to_le16(active_dwell);
 +              scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
 +
 +              /* Set txpower levels to defaults */
 +              scan_ch->dsp_atten = 110;
 +
 +              if (band == IEEE80211_BAND_5GHZ)
 +                      scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
 +              else {
 +                      scan_ch->tx_gain = ((1 << 5) | (5 << 3));
 +                      /* NOTE: if we were doing 6Mb OFDM for scans we'd use
 +                       * power level:
 +                       * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
 +                       */
 +              }
 +
 +              IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
 +                             scan_ch->channel,
 +                             (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
 +                             (scan_ch->type & 1) ?
 +                             active_dwell : passive_dwell);
 +
 +              scan_ch++;
 +              added++;
 +      }
 +
 +      IWL_DEBUG_SCAN("total channels to scan %d \n", added);
 +      return added;
 +}
 +
 +void iwl_init_scan_params(struct iwl_priv *priv)
 +{
 +      if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ])
 +              priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = RATE_MCS_ANT_INIT_IND;
 +      if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
 +              priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = RATE_MCS_ANT_INIT_IND;
 +}
 +
 +int iwl_scan_initiate(struct iwl_priv *priv)
 +{
 +      if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
 +              IWL_ERROR("APs don't scan.\n");
 +              return 0;
 +      }
 +
 +      if (!iwl_is_ready_rf(priv)) {
 +              IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
 +              return -EIO;
 +      }
 +
 +      if (test_bit(STATUS_SCANNING, &priv->status)) {
 +              IWL_DEBUG_SCAN("Scan already in progress.\n");
 +              return -EAGAIN;
 +      }
 +
 +      if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
 +              IWL_DEBUG_SCAN("Scan request while abort pending.  "
 +                             "Queuing.\n");
 +              return -EAGAIN;
 +      }
 +
 +      IWL_DEBUG_INFO("Starting scan...\n");
-       switch (priv->scan_bands) {
-       case 2:
++      if (priv->cfg->sku & IWL_SKU_G)
++              priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
++      if (priv->cfg->sku & IWL_SKU_A)
++              priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
 +      set_bit(STATUS_SCANNING, &priv->status);
 +      priv->scan_start = jiffies;
 +      priv->scan_pass_start = priv->scan_start;
 +
 +      queue_work(priv->workqueue, &priv->request_scan);
 +
 +      return 0;
 +}
 +EXPORT_SYMBOL(iwl_scan_initiate);
 +
 +#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
 +
 +static void iwl_bg_scan_check(struct work_struct *data)
 +{
 +      struct iwl_priv *priv =
 +          container_of(data, struct iwl_priv, scan_check.work);
 +
 +      if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 +              return;
 +
 +      mutex_lock(&priv->mutex);
 +      if (test_bit(STATUS_SCANNING, &priv->status) ||
 +          test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
 +              IWL_DEBUG(IWL_DL_SCAN, "Scan completion watchdog resetting "
 +                      "adapter (%dms)\n",
 +                      jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
 +
 +              if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
 +                      iwl_send_scan_abort(priv);
 +      }
 +      mutex_unlock(&priv->mutex);
 +}
 +/**
 + * iwl_supported_rate_to_ie - fill in the supported rate in IE field
 + *
 + * return : set the bit for each supported rate insert in ie
 + */
 +static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate,
 +                                  u16 basic_rate, int *left)
 +{
 +      u16 ret_rates = 0, bit;
 +      int i;
 +      u8 *cnt = ie;
 +      u8 *rates = ie + 1;
 +
 +      for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
 +              if (bit & supported_rate) {
 +                      ret_rates |= bit;
 +                      rates[*cnt] = iwl_rates[i].ieee |
 +                              ((bit & basic_rate) ? 0x80 : 0x00);
 +                      (*cnt)++;
 +                      (*left)--;
 +                      if ((*left <= 0) ||
 +                          (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
 +                              break;
 +              }
 +      }
 +
 +      return ret_rates;
 +}
 +
 +
 +static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband,
 +                           u8 *pos, int *left)
 +{
 +      struct ieee80211_ht_cap *ht_cap;
 +
 +      if (!sband || !sband->ht_info.ht_supported)
 +              return;
 +
 +      if (*left < sizeof(struct ieee80211_ht_cap))
 +              return;
 +
 +      *pos++ = sizeof(struct ieee80211_ht_cap);
 +      ht_cap = (struct ieee80211_ht_cap *) pos;
 +
 +      ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap);
 +      memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16);
 +      ht_cap->ampdu_params_info =
 +              (sband->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) |
 +              ((sband->ht_info.ampdu_density << 2) &
 +                      IEEE80211_HT_CAP_AMPDU_DENSITY);
 +      *left -= sizeof(struct ieee80211_ht_cap);
 +}
 +
 +/**
 + * iwl_fill_probe_req - fill in all required fields and IE for probe request
 + */
 +
 +static u16 iwl_fill_probe_req(struct iwl_priv *priv,
 +                                enum ieee80211_band band,
 +                                struct ieee80211_mgmt *frame,
 +                                int left)
 +{
 +      int len = 0;
 +      u8 *pos = NULL;
 +      u16 active_rates, ret_rates, cck_rates, active_rate_basic;
 +      const struct ieee80211_supported_band *sband =
 +                                              iwl_get_hw_mode(priv, band);
 +
 +
 +      /* Make sure there is enough space for the probe request,
 +       * two mandatory IEs and the data */
 +      left -= 24;
 +      if (left < 0)
 +              return 0;
 +
 +      frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
 +      memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
 +      memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
 +      memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
 +      frame->seq_ctrl = 0;
 +
 +      len += 24;
 +
 +      /* ...next IE... */
 +      pos = &frame->u.probe_req.variable[0];
 +
 +      /* fill in our indirect SSID IE */
 +      left -= 2;
 +      if (left < 0)
 +              return 0;
 +      *pos++ = WLAN_EID_SSID;
 +      *pos++ = 0;
 +
 +      len += 2;
 +
 +      /* fill in supported rate */
 +      left -= 2;
 +      if (left < 0)
 +              return 0;
 +
 +      *pos++ = WLAN_EID_SUPP_RATES;
 +      *pos = 0;
 +
 +      /* exclude 60M rate */
 +      active_rates = priv->rates_mask;
 +      active_rates &= ~IWL_RATE_60M_MASK;
 +
 +      active_rate_basic = active_rates & IWL_BASIC_RATES_MASK;
 +
 +      cck_rates = IWL_CCK_RATES_MASK & active_rates;
 +      ret_rates = iwl_supported_rate_to_ie(pos, cck_rates,
 +                                           active_rate_basic, &left);
 +      active_rates &= ~ret_rates;
 +
 +      ret_rates = iwl_supported_rate_to_ie(pos, active_rates,
 +                                           active_rate_basic, &left);
 +      active_rates &= ~ret_rates;
 +
 +      len += 2 + *pos;
 +      pos += (*pos) + 1;
 +
 +      if (active_rates == 0)
 +              goto fill_end;
 +
 +      /* fill in supported extended rate */
 +      /* ...next IE... */
 +      left -= 2;
 +      if (left < 0)
 +              return 0;
 +      /* ... fill it in... */
 +      *pos++ = WLAN_EID_EXT_SUPP_RATES;
 +      *pos = 0;
 +      iwl_supported_rate_to_ie(pos, active_rates, active_rate_basic, &left);
 +      if (*pos > 0) {
 +              len += 2 + *pos;
 +              pos += (*pos) + 1;
 +      } else {
 +              pos--;
 +      }
 +
 + fill_end:
 +
 +      left -= 2;
 +      if (left < 0)
 +              return 0;
 +
 +      *pos++ = WLAN_EID_HT_CAPABILITY;
 +      *pos = 0;
 +      iwl_ht_cap_to_ie(sband, pos, &left);
 +      if (*pos > 0)
 +              len += 2 + *pos;
 +
 +      return (u16)len;
 +}
 +
 +static u32 iwl_scan_tx_ant(struct iwl_priv *priv, enum ieee80211_band band)
 +{
 +      int i, ind;
 +
 +      ind = priv->scan_tx_ant[band];
 +      for (i = 0; i < priv->hw_params.tx_chains_num; i++) {
 +              ind = (ind+1) >= priv->hw_params.tx_chains_num ? 0 : ind+1;
 +              if (priv->hw_params.valid_tx_ant & (1 << ind)) {
 +                      priv->scan_tx_ant[band] = ind;
 +                      break;
 +              }
 +      }
 +
 +      return scan_tx_ant[ind];
 +}
 +
 +
 +static void iwl_bg_request_scan(struct work_struct *data)
 +{
 +      struct iwl_priv *priv =
 +          container_of(data, struct iwl_priv, request_scan);
 +      struct iwl_host_cmd cmd = {
 +              .id = REPLY_SCAN_CMD,
 +              .len = sizeof(struct iwl_scan_cmd),
 +              .meta.flags = CMD_SIZE_HUGE,
 +      };
 +      struct iwl_scan_cmd *scan;
 +      struct ieee80211_conf *conf = NULL;
 +      int ret = 0;
 +      u32 tx_ant;
 +      u16 cmd_len;
 +      enum ieee80211_band band;
 +      u8 direct_mask;
 +      u8 rx_chain = 0x7; /* bitmap: ABC chains */
 +
 +      conf = ieee80211_get_hw_conf(priv->hw);
 +
 +      mutex_lock(&priv->mutex);
 +
 +      if (!iwl_is_ready(priv)) {
 +              IWL_WARNING("request scan called when driver not ready.\n");
 +              goto done;
 +      }
 +
 +      /* Make sure the scan wasn't cancelled before this queued work
 +       * was given the chance to run... */
 +      if (!test_bit(STATUS_SCANNING, &priv->status))
 +              goto done;
 +
 +      /* This should never be called or scheduled if there is currently
 +       * a scan active in the hardware. */
 +      if (test_bit(STATUS_SCAN_HW, &priv->status)) {
 +              IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
 +                             "Ignoring second request.\n");
 +              ret = -EIO;
 +              goto done;
 +      }
 +
 +      if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
 +              IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
 +              goto done;
 +      }
 +
 +      if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
 +              IWL_DEBUG_HC("Scan request while abort pending.  Queuing.\n");
 +              goto done;
 +      }
 +
 +      if (iwl_is_rfkill(priv)) {
 +              IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
 +              goto done;
 +      }
 +
 +      if (!test_bit(STATUS_READY, &priv->status)) {
 +              IWL_DEBUG_HC("Scan request while uninitialized.  Queuing.\n");
 +              goto done;
 +      }
 +
 +      if (!priv->scan_bands) {
 +              IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
 +              goto done;
 +      }
 +
 +      if (!priv->scan) {
 +              priv->scan = kmalloc(sizeof(struct iwl_scan_cmd) +
 +                                   IWL_MAX_SCAN_SIZE, GFP_KERNEL);
 +              if (!priv->scan) {
 +                      ret = -ENOMEM;
 +                      goto done;
 +              }
 +      }
 +      scan = priv->scan;
 +      memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
 +
 +      scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
 +      scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
 +
 +      if (iwl_is_associated(priv)) {
 +              u16 interval = 0;
 +              u32 extra;
 +              u32 suspend_time = 100;
 +              u32 scan_suspend_time = 100;
 +              unsigned long flags;
 +
 +              IWL_DEBUG_INFO("Scanning while associated...\n");
 +
 +              spin_lock_irqsave(&priv->lock, flags);
 +              interval = priv->beacon_int;
 +              spin_unlock_irqrestore(&priv->lock, flags);
 +
 +              scan->suspend_time = 0;
 +              scan->max_out_time = cpu_to_le32(200 * 1024);
 +              if (!interval)
 +                      interval = suspend_time;
 +
 +              extra = (suspend_time / interval) << 22;
 +              scan_suspend_time = (extra |
 +                  ((suspend_time % interval) * 1024));
 +              scan->suspend_time = cpu_to_le32(scan_suspend_time);
 +              IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
 +                             scan_suspend_time, interval);
 +      }
 +
 +      /* We should add the ability for user to lock to PASSIVE ONLY */
 +      if (priv->one_direct_scan) {
 +              IWL_DEBUG_SCAN("Start direct scan for '%s'\n",
 +                              iwl_escape_essid(priv->direct_ssid,
 +                              priv->direct_ssid_len));
 +              scan->direct_scan[0].id = WLAN_EID_SSID;
 +              scan->direct_scan[0].len = priv->direct_ssid_len;
 +              memcpy(scan->direct_scan[0].ssid,
 +                     priv->direct_ssid, priv->direct_ssid_len);
 +              direct_mask = 1;
 +      } else if (!iwl_is_associated(priv) && priv->essid_len) {
 +              IWL_DEBUG_SCAN("Start direct scan for '%s' (not associated)\n",
 +                              iwl_escape_essid(priv->essid, priv->essid_len));
 +              scan->direct_scan[0].id = WLAN_EID_SSID;
 +              scan->direct_scan[0].len = priv->essid_len;
 +              memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
 +              direct_mask = 1;
 +      } else {
 +              IWL_DEBUG_SCAN("Start indirect scan.\n");
 +              direct_mask = 0;
 +      }
 +
 +      scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
 +      scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
 +      scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 +
 +
-               break;
-       case 1:
++      if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
 +              band = IEEE80211_BAND_2GHZ;
 +              scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
 +              tx_ant = iwl_scan_tx_ant(priv, band);
 +              if (priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK)
 +                      scan->tx_cmd.rate_n_flags =
 +                              iwl_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
 +                                                      tx_ant);
 +              else
 +                      scan->tx_cmd.rate_n_flags =
 +                              iwl_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
 +                                                      tx_ant |
 +                                                      RATE_MCS_CCK_MSK);
 +              scan->good_CRC_th = 0;
-               break;
-       default:
++      } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
 +              band = IEEE80211_BAND_5GHZ;
 +              tx_ant = iwl_scan_tx_ant(priv, band);
 +              scan->tx_cmd.rate_n_flags =
 +                              iwl_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
 +                                                      tx_ant);
 +              scan->good_CRC_th = IWL_GOOD_CRC_TH;
 +
 +              /* Force use of chains B and C (0x6) for scan Rx for 4965
 +               * Avoid A (0x1) because of its off-channel reception on A-band.
 +               * MIMO is not used here, but value is required */
 +              if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
 +                      rx_chain = 0x6;
++      } else {
 +              IWL_WARNING("Invalid scan band count\n");
 +              goto done;
 +      }
 +
 +      scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK |
 +                              cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
 +                              (rx_chain << RXON_RX_CHAIN_FORCE_SEL_POS) |
 +                              (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
 +
 +      cmd_len = iwl_fill_probe_req(priv, band,
 +                                   (struct ieee80211_mgmt *)scan->data,
 +                                   IWL_MAX_SCAN_SIZE - sizeof(*scan));
 +
 +      scan->tx_cmd.len = cpu_to_le16(cmd_len);
 +
 +      if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
 +              scan->filter_flags = RXON_FILTER_PROMISC_MSK;
 +
 +      scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
 +                             RXON_FILTER_BCON_AWARE_MSK);
 +
 +      if (direct_mask)
 +              scan->channel_count =
 +                      iwl_get_channels_for_scan(priv, band, 1, /* active */
 +                                                direct_mask,
 +                              (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
 +      else
 +              scan->channel_count =
 +                      iwl_get_channels_for_scan(priv, band, 0, /* passive */
 +                                                direct_mask,
 +                              (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
 +      if (scan->channel_count == 0) {
 +              IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count);
 +              goto done;
 +      }
 +
 +      cmd.len += le16_to_cpu(scan->tx_cmd.len) +
 +          scan->channel_count * sizeof(struct iwl_scan_channel);
 +      cmd.data = scan;
 +      scan->len = cpu_to_le16(cmd.len);
 +
 +      set_bit(STATUS_SCAN_HW, &priv->status);
 +      ret = iwl_send_cmd_sync(priv, &cmd);
 +      if (ret)
 +              goto done;
 +
 +      queue_delayed_work(priv->workqueue, &priv->scan_check,
 +                         IWL_SCAN_CHECK_WATCHDOG);
 +
 +      mutex_unlock(&priv->mutex);
 +      return;
 +
 + done:
 +      /* inform mac80211 scan aborted */
 +      queue_work(priv->workqueue, &priv->scan_completed);
 +      mutex_unlock(&priv->mutex);
 +}
 +
 +static void iwl_bg_abort_scan(struct work_struct *work)
 +{
 +      struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
 +
 +      if (!iwl_is_ready(priv))
 +              return;
 +
 +      mutex_lock(&priv->mutex);
 +
 +      set_bit(STATUS_SCAN_ABORTING, &priv->status);
 +      iwl_send_scan_abort(priv);
 +
 +      mutex_unlock(&priv->mutex);
 +}
 +
 +void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
 +{
 +      /*  FIXME: move here when resolved PENDING
 +       *  INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); */
 +      INIT_WORK(&priv->request_scan, iwl_bg_request_scan);
 +      INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
 +      INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
 +}
 +EXPORT_SYMBOL(iwl_setup_scan_deferred_work);
 +
Simple merge
index 9ea677320daa672e98b96e1945b261b199845433,c997d4f28ab39bd31e7e8b25adad8ea278b1c198..cc4fee105ed66dcebf2131bed7b3f523c993a99b
@@@ -434,10 -425,19 +426,19 @@@ static void rt2x00lib_intf_scheduled_it
  
        spin_unlock(&intf->lock);
  
+       /*
+        * It is possible the radio was disabled while the work had been
+        * scheduled. If that happens we should return here immediately,
+        * note that in the spinlock protected area above the delayed_flags
+        * have been cleared correctly.
+        */
+       if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+               return;
        if (delayed_flags & DELAYED_UPDATE_BEACON) {
 -              skb = ieee80211_beacon_get(rt2x00dev->hw, vif, &control);
 -              if (skb && rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw,
 -                                                           skb, &control))
 +              skb = ieee80211_beacon_get(rt2x00dev->hw, vif);
 +              if (skb &&
 +                  rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, skb))
                        dev_kfree_skb(skb);
        }
  
Simple merge
Simple merge
Simple merge
Simple merge
diff --cc net/core/dev.c
Simple merge
Simple merge
Simple merge
diff --cc net/ipv4/tcp.c
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge