[BNX2]: Fix race conditions when calling register_netdev().

Hot-plug scripts can call bnx2_open() as soon as register_netdev() is
called in bnx2_init_one().  We need to call pci_set_drvdata() and
setup everything before calling register_netdev(). netif_carrier_off()
also needs to be moved to bnx2_open() to avoid race conditions with
the irq.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 679ee669e1e030bad78143c5e964a7b37957341e..cffdec3d5b5a3bc909b4eec25c358d38bb65afb0 100644 (file)
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -4350,6 +4350,8 @@ bnx2_open(struct net_device *dev)
        struct bnx2 *bp = netdev_priv(dev);
        int rc;
 
+       netif_carrier_off(dev);
+
        bnx2_set_power_state(bp, PCI_D0);
        bnx2_disable_int(bp);
 
@@ -6086,6 +6088,18 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
        dev->poll_controller = poll_bnx2;
 #endif
 
+       pci_set_drvdata(pdev, dev);
+
+       memcpy(dev->dev_addr, bp->mac_addr, 6);
+       memcpy(dev->perm_addr, bp->mac_addr, 6);
+       bp->name = board_info[ent->driver_data].name;
+
+       dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+#ifdef BCM_VLAN
+       dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+#endif
+       dev->features |= NETIF_F_TSO | NETIF_F_TSO_ECN;
+
        if ((rc = register_netdev(dev))) {
                dev_err(&pdev->dev, "Cannot register net device\n");
                if (bp->regview)
@@ -6097,11 +6111,6 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                return rc;
        }
 
-       pci_set_drvdata(pdev, dev);
-
-       memcpy(dev->dev_addr, bp->mac_addr, 6);
-       memcpy(dev->perm_addr, bp->mac_addr, 6);
-       bp->name = board_info[ent->driver_data].name,
        printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz found at mem %lx, "
                "IRQ %d, ",
                dev->name,
@@ -6119,15 +6128,6 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                printk("%2.2x", dev->dev_addr[i]);
        printk("\n");
 
-       dev->features |= NETIF_F_SG;
-       dev->features |= NETIF_F_IP_CSUM;
-#ifdef BCM_VLAN
-       dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-#endif
-       dev->features |= NETIF_F_TSO | NETIF_F_TSO_ECN;
-
-       netif_carrier_off(bp->dev);
-
        return 0;
 }