pata_ali: force initialise a few bits

We can't assume some of the setup here on non x86 boxes.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 73c466e452ca3a4d2181fcd06e5015c301cfa8b1..d2ea2db61e526fda331e005482337a7944d4fd69 100644 (file)
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -19,7 +19,9 @@
  *
  *  TODO/CHECK
  *     Cannot have ATAPI on both master & slave for rev < c2 (???) but
- *     otherwise should do atapi DMA.
+ *     otherwise should do atapi DMA (For now for old we do PIO only for
+ *     ATAPI)
+ *     Review Sunblade workaround.
  */
 
 #include <linux/kernel.h>
@@ -33,12 +35,14 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.5"
+#define DRV_VERSION "0.7.7"
 
 static int ali_atapi_dma = 0;
 module_param_named(atapi_dma, ali_atapi_dma, int, 0644);
 MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");
 
+static struct pci_dev *isa_bridge;
+
 /*
  *     Cable special cases
  */
@@ -401,52 +405,49 @@ static struct ata_port_operations ali_c5_port_ops = {
 static void ali_init_chipset(struct pci_dev *pdev)
 {
        u8 tmp;
-       struct pci_dev *north, *isa_bridge;
+       struct pci_dev *north;
 
        /*
         * The chipset revision selects the driver operations and
         * mode data.
         */
 
-       if (pdev->revision >= 0x20 && pdev->revision < 0xC2) {
-               /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
-               pci_read_config_byte(pdev, 0x4B, &tmp);
-               /* Clear CD-ROM DMA write bit */
-               tmp &= 0x7F;
-               pci_write_config_byte(pdev, 0x4B, tmp);
-       } else if (pdev->revision >= 0xC2) {
-               /* Enable cable detection logic */
+       if (pdev->revision <= 0x20) {
+               pci_read_config_byte(pdev, 0x53, &tmp);
+               tmp |= 0x03;
+               pci_write_config_byte(pdev, 0x53, tmp);
+       } else {
+               pci_read_config_byte(pdev, 0x4a, &tmp);
+               pci_write_config_byte(pdev, 0x4a, tmp | 0x20);
                pci_read_config_byte(pdev, 0x4B, &tmp);
-               pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
-       }
-       north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
-       isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-
-       if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
-               /* Configure the ALi bridge logic. For non ALi rely on BIOS.
-                  Set the south bridge enable bit */
-               pci_read_config_byte(isa_bridge, 0x79, &tmp);
-               if (pdev->revision == 0xC2)
-                       pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
-               else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
-                       pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
-       }
-       if (pdev->revision >= 0x20) {
+               if (pdev->revision < 0xC2)
+                       /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
+                       /* Clear CD-ROM DMA write bit */
+                       tmp &= 0x7F;
+               /* Cable and UDMA */
+               pci_write_config_byte(pdev, 0x4B, tmp | 0x09);
                /*
                 * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
                 * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
                 * via 0x54/55.
                 */
                pci_read_config_byte(pdev, 0x53, &tmp);
-               if (pdev->revision <= 0x20)
-                       tmp &= ~0x02;
                if (pdev->revision >= 0xc7)
                        tmp |= 0x03;
                else
                        tmp |= 0x01;    /* CD_ROM enable for DMA */
                pci_write_config_byte(pdev, 0x53, tmp);
        }
-       pci_dev_put(isa_bridge);
+       north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+       if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
+               /* Configure the ALi bridge logic. For non ALi rely on BIOS.
+                  Set the south bridge enable bit */
+               pci_read_config_byte(isa_bridge, 0x79, &tmp);
+               if (pdev->revision == 0xC2)
+                       pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
+               else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
+                       pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
+       }
        pci_dev_put(north);
        ata_pci_bmdma_clear_simplex(pdev);
 }
@@ -516,7 +517,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
        const struct ata_port_info *ppi[] = { NULL, NULL };
        u8 tmp;
-       struct pci_dev *isa_bridge;
        int rc;
 
        rc = pcim_enable_device(pdev);
@@ -543,14 +543,12 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
        ali_init_chipset(pdev);
 
-       isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
        if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
                /* Are we paired with a UDMA capable chip */
                pci_read_config_byte(isa_bridge, 0x5E, &tmp);
                if ((tmp & 0x1E) == 0x12)
                        ppi[0] = &info_20_udma;
        }
-       pci_dev_put(isa_bridge);
 
        return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
 }
@@ -590,13 +588,20 @@ static struct pci_driver ali_pci_driver = {
 
 static int __init ali_init(void)
 {
-       return pci_register_driver(&ali_pci_driver);
+       int ret;
+       isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+
+       ret = pci_register_driver(&ali_pci_driver);
+       if (ret < 0)
+               pci_dev_put(isa_bridge);
+       return ret;
 }
 
 
 static void __exit ali_exit(void)
 {
        pci_unregister_driver(&ali_pci_driver);
+       pci_dev_put(isa_bridge);
 }