PHYSICAL_START.
For more details see Documentation/kdump/kdump.txt
+config RELOCATABLE
+ bool "Build a relocatable kernel(EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ Builds a relocatable kernel. This enables loading and running
+ a kernel binary from a different physical address than it has
+ been compiled for.
+
+ One use is for the kexec on panic case where the recovery kernel
+ must live at a different physical address than the primary
+ kernel.
+
+ Note: If CONFIG_RELOCATABLE=y, then kernel run from the address
+ it has been loaded at and compile time physical address
+ (CONFIG_PHYSICAL_START) is ignored.
+
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
- default "0x1000000" if CRASH_DUMP
default "0x200000"
help
- This gives the physical address where the kernel is loaded. Normally
- for regular kernels this value is 0x200000 (2MB). But in the case
- of kexec on panic the fail safe kernel needs to run at a different
- address than the panic-ed kernel. This option is used to set the load
- address for kernels used to capture crash dump on being kexec'ed
- after panic. The default value for crash dump kernels is
- 0x1000000 (16MB). This can also be set based on the "X" value as
+ This gives the physical address where the kernel is loaded. It
+ should be aligned to 2MB boundary.
+
+ If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
+ bzImage will decompress itself to above physical address and
+ run from there. Otherwise, bzImage will run from the address where
+ it has been loaded by the boot loader and will ignore above physical
+ address.
+
+ In normal kdump cases one does not have to set/change this option
+ as now bzImage can be compiled as a completely relocatable image
+ (CONFIG_RELOCATABLE=y) and be used to load and run from a different
+ address. This option is mainly useful for the folks who don't want
+ to use a bzImage for capturing the crash dump and want to use a
+ vmlinux instead.
+
+ So if you are using bzImage for capturing the crash dump, leave
+ the value here unchanged to 0x200000 and set CONFIG_RELOCATABLE=y.
+ Otherwise if you plan to use vmlinux for capturing the crash dump
+ change this value to start of the reserved region (Typically 16MB
+ 0x1000000). In other words, it can be set based on the "X" value as
specified in the "crashkernel=YM@XM" command line boot parameter
passed to the panic-ed kernel. Typically this parameter is set as
crashkernel=64M@16M. Please take a look at
Documentation/kdump/kdump.txt for more details about crash dumps.
+ Usage of bzImage for capturing the crash dump is advantageous as
+ one does not have to build two kernels. Same kernel can be used
+ as production kernel and capture kernel.
+
Don't change this unless you know what you are doing.
config SECCOMP
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
EXTRA_AFLAGS := -traditional
-AFLAGS := $(subst -m64,-m32,$(AFLAGS))
# cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with
# -m32
-CFLAGS := -m32 -D__KERNEL__ -Iinclude -O2 -fno-strict-aliasing
-LDFLAGS := -m elf_i386
+CFLAGS := -m64 -D__KERNEL__ -Iinclude -O2 -fno-strict-aliasing -fPIC -mcmodel=small -fno-builtin
+LDFLAGS := -m elf_x86_64
-LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup_32 -m elf_i386
-
-$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
+LDFLAGS_vmlinux := -T
+$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
+LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,ld)
#include <linux/linkage.h>
#include <asm/segment.h>
+#include <asm/pgtable.h>
#include <asm/page.h>
+#include <asm/msr.h>
+.section ".text.head"
.code32
.globl startup_32
-
+
startup_32:
cld
cli
- movl $(__KERNEL_DS),%eax
- movl %eax,%ds
- movl %eax,%es
- movl %eax,%fs
- movl %eax,%gs
-
- lss stack_start,%esp
- xorl %eax,%eax
-1: incl %eax # check that A20 really IS enabled
- movl %eax,0x000000 # loop forever if it isn't
- cmpl %eax,0x100000
- je 1b
+ movl $(__KERNEL_DS), %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %ss
+
+/* Calculate the delta between where we were compiled to run
+ * at and where we were actually loaded at. This can only be done
+ * with a short local call on x86. Nothing else will tell us what
+ * address we are running at. The reserved chunk of the real-mode
+ * data at 0x34-0x3f are used as the stack for this calculation.
+ * Only 4 bytes are needed.
+ */
+ leal 0x40(%esi), %esp
+ call 1f
+1: popl %ebp
+ subl $1b, %ebp
+
+/* Compute the delta between where we were compiled to run at
+ * and where the code will actually run at.
+ */
+/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ * contains the address where we should move the kernel image temporarily
+ * for safe in-place decompression.
+ */
+
+#ifdef CONFIG_RELOCATABLE
+ movl %ebp, %ebx
+ addl $(LARGE_PAGE_SIZE -1), %ebx
+ andl $LARGE_PAGE_MASK, %ebx
+#else
+ movl $CONFIG_PHYSICAL_START, %ebx
+#endif
+
+ /* Replace the compressed data size with the uncompressed size */
+ subl input_len(%ebp), %ebx
+ movl output_len(%ebp), %eax
+ addl %eax, %ebx
+ /* Add 8 bytes for every 32K input block */
+ shrl $12, %eax
+ addl %eax, %ebx
+ /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
+ addl $(32768 + 18 + 4095), %ebx
+ andl $~4095, %ebx
/*
- * Initialize eflags. Some BIOS's leave bits like NT set. This would
- * confuse the debugger if this code is traced.
- * XXX - best to initialize before switching to protected mode.
+ * Prepare for entering 64 bit mode
*/
- pushl $0
- popfl
+
+ /* Load new GDT with the 64bit segments using 32bit descriptor */
+ leal gdt(%ebp), %eax
+ movl %eax, gdt+2(%ebp)
+ lgdt gdt(%ebp)
+
+ /* Enable PAE mode */
+ xorl %eax, %eax
+ orl $(1 << 5), %eax
+ movl %eax, %cr4
+
+ /*
+ * Build early 4G boot pagetable
+ */
+ /* Initialize Page tables to 0*/
+ leal pgtable(%ebx), %edi
+ xorl %eax, %eax
+ movl $((4096*6)/4), %ecx
+ rep stosl
+
+ /* Build Level 4 */
+ leal pgtable + 0(%ebx), %edi
+ leal 0x1007 (%edi), %eax
+ movl %eax, 0(%edi)
+
+ /* Build Level 3 */
+ leal pgtable + 0x1000(%ebx), %edi
+ leal 0x1007(%edi), %eax
+ movl $4, %ecx
+1: movl %eax, 0x00(%edi)
+ addl $0x00001000, %eax
+ addl $8, %edi
+ decl %ecx
+ jnz 1b
+
+ /* Build Level 2 */
+ leal pgtable + 0x2000(%ebx), %edi
+ movl $0x00000183, %eax
+ movl $2048, %ecx
+1: movl %eax, 0(%edi)
+ addl $0x00200000, %eax
+ addl $8, %edi
+ decl %ecx
+ jnz 1b
+
+ /* Enable the boot page tables */
+ leal pgtable(%ebx), %eax
+ movl %eax, %cr3
+
+ /* Enable Long mode in EFER (Extended Feature Enable Register) */
+ movl $MSR_EFER, %ecx
+ rdmsr
+ btsl $_EFER_LME, %eax
+ wrmsr
+
+ /* Setup for the jump to 64bit mode
+ *
+ * When the jump is performend we will be in long mode but
+ * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
+ * (and in turn EFER.LMA = 1). To jump into 64bit mode we use
+ * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+ * We place all of the values on our mini stack so lret can
+ * used to perform that far jump.
+ */
+ pushl $__KERNEL_CS
+ leal startup_64(%ebp), %eax
+ pushl %eax
+
+ /* Enter paged protected Mode, activating Long Mode */
+ movl $0x80000001, %eax /* Enable Paging and Protected mode */
+ movl %eax, %cr0
+
+ /* Jump from 32bit compatibility mode into 64bit mode. */
+ lret
+
+ /* Be careful here startup_64 needs to be at a predictable
+ * address so I can export it in an ELF header. Bootloaders
+ * should look at the ELF header to find this address, as
+ * it may change in the future.
+ */
+ .code64
+ .org 0x100
+ENTRY(startup_64)
+ /* We come here either from startup_32 or directly from a
+ * 64bit bootloader. If we come here from a bootloader we depend on
+ * an identity mapped page table being provied that maps our
+ * entire text+data+bss and hopefully all of memory.
+ */
+
+ /* Setup data segments. */
+ xorl %eax, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %ss
+
+ /* Compute the decompressed kernel start address. It is where
+ * we were loaded at aligned to a 2M boundary. %rbp contains the
+ * decompressed kernel start address.
+ *
+ * If it is a relocatable kernel then decompress and run the kernel
+ * from load address aligned to 2MB addr, otherwise decompress and
+ * run the kernel from CONFIG_PHYSICAL_START
+ */
+
+ /* Start with the delta to where the kernel will run at. */
+#ifdef CONFIG_RELOCATABLE
+ leaq startup_32(%rip) /* - $startup_32 */, %rbp
+ addq $(LARGE_PAGE_SIZE - 1), %rbp
+ andq $LARGE_PAGE_MASK, %rbp
+ movq %rbp, %rbx
+#else
+ movq $CONFIG_PHYSICAL_START, %rbp
+ movq %rbp, %rbx
+#endif
+
+ /* Replace the compressed data size with the uncompressed size */
+ movl input_len(%rip), %eax
+ subq %rax, %rbx
+ movl output_len(%rip), %eax
+ addq %rax, %rbx
+ /* Add 8 bytes for every 32K input block */
+ shrq $12, %rax
+ addq %rax, %rbx
+ /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
+ addq $(32768 + 18 + 4095), %rbx
+ andq $~4095, %rbx
+
+/* Copy the compressed kernel to the end of our buffer
+ * where decompression in place becomes safe.
+ */
+ leaq _end(%rip), %r8
+ leaq _end(%rbx), %r9
+ movq $_end /* - $startup_32 */, %rcx
+1: subq $8, %r8
+ subq $8, %r9
+ movq 0(%r8), %rax
+ movq %rax, 0(%r9)
+ subq $8, %rcx
+ jnz 1b
+
+/*
+ * Jump to the relocated address.
+ */
+ leaq relocated(%rbx), %rax
+ jmp *%rax
+
+.section ".text"
+relocated:
+
/*
* Clear BSS
*/
- xorl %eax,%eax
- movl $_edata,%edi
- movl $_end,%ecx
- subl %edi,%ecx
+ xorq %rax, %rax
+ leaq _edata(%rbx), %rdi
+ leaq _end(%rbx), %rcx
+ subq %rdi, %rcx
cld
rep
stosb
+
+ /* Setup the stack */
+ leaq user_stack_end(%rip), %rsp
+
+ /* zero EFLAGS after setting rsp */
+ pushq $0
+ popfq
+
/*
* Do the decompression, and jump to the new kernel..
*/
- subl $16,%esp # place for structure on the stack
- movl %esp,%eax
- pushl %esi # real mode pointer as second arg
- pushl %eax # address of structure as first arg
- call decompress_kernel
- orl %eax,%eax
- jnz 3f
- addl $8,%esp
- xorl %ebx,%ebx
- ljmp $(__KERNEL_CS), $__PHYSICAL_START
+ pushq %rsi # Save the real mode argument
+ movq %rsi, %rdi # real mode address
+ leaq _heap(%rip), %rsi # _heap
+ leaq input_data(%rip), %rdx # input_data
+ movl input_len(%rip), %eax
+ movq %rax, %rcx # input_len
+ movq %rbp, %r8 # output
+ call decompress_kernel
+ popq %rsi
-/*
- * We come here, if we were loaded high.
- * We need to move the move-in-place routine down to 0x1000
- * and then start it with the buffer addresses in registers,
- * which we got from the stack.
- */
-3:
- movl %esi,%ebx
- movl $move_routine_start,%esi
- movl $0x1000,%edi
- movl $move_routine_end,%ecx
- subl %esi,%ecx
- addl $3,%ecx
- shrl $2,%ecx
- cld
- rep
- movsl
-
- popl %esi # discard the address
- addl $4,%esp # real mode pointer
- popl %esi # low_buffer_start
- popl %ecx # lcount
- popl %edx # high_buffer_start
- popl %eax # hcount
- movl $__PHYSICAL_START,%edi
- cli # make sure we don't get interrupted
- ljmp $(__KERNEL_CS), $0x1000 # and jump to the move routine
/*
- * Routine (template) for moving the decompressed kernel in place,
- * if we were high loaded. This _must_ PIC-code !
+ * Jump to the decompressed kernel.
*/
-move_routine_start:
- movl %ecx,%ebp
- shrl $2,%ecx
- rep
- movsl
- movl %ebp,%ecx
- andl $3,%ecx
- rep
- movsb
- movl %edx,%esi
- movl %eax,%ecx # NOTE: rep movsb won't move if %ecx == 0
- addl $3,%ecx
- shrl $2,%ecx
- rep
- movsl
- movl %ebx,%esi # Restore setup pointer
- xorl %ebx,%ebx
- ljmp $(__KERNEL_CS), $__PHYSICAL_START
-move_routine_end:
+ jmp *%rbp
-
-/* Stack for uncompression */
- .align 32
-user_stack:
+ .data
+gdt:
+ .word gdt_end - gdt
+ .long gdt
+ .word 0
+ .quad 0x0000000000000000 /* NULL descriptor */
+ .quad 0x00af9a000000ffff /* __KERNEL_CS */
+ .quad 0x00cf92000000ffff /* __KERNEL_DS */
+gdt_end:
+ .bss
+/* Stack for uncompression */
+ .balign 4
+user_stack:
.fill 4096,4,0
-stack_start:
- .long user_stack+4096
- .word __KERNEL_DS
-
+user_stack_end:
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
+#define _LINUX_STRING_H_ 1
+#define __LINUX_BITMAP_H 1
+
+#include <linux/linkage.h>
#include <linux/screen_info.h>
#include <asm/io.h>
#include <asm/page.h>
+/* WARNING!!
+ * This code is compiled with -fPIC and it is relocated dynamically
+ * at run time, but no relocation processing is performed.
+ * This means that it is not safe to place pointers in static structures.
+ */
+
+/*
+ * Getting to provable safe in place decompression is hard.
+ * Worst case behaviours need to be analized.
+ * Background information:
+ *
+ * The file layout is:
+ * magic[2]
+ * method[1]
+ * flags[1]
+ * timestamp[4]
+ * extraflags[1]
+ * os[1]
+ * compressed data blocks[N]
+ * crc[4] orig_len[4]
+ *
+ * resulting in 18 bytes of non compressed data overhead.
+ *
+ * Files divided into blocks
+ * 1 bit (last block flag)
+ * 2 bits (block type)
+ *
+ * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
+ * The smallest block type encoding is always used.
+ *
+ * stored:
+ * 32 bits length in bytes.
+ *
+ * fixed:
+ * magic fixed tree.
+ * symbols.
+ *
+ * dynamic:
+ * dynamic tree encoding.
+ * symbols.
+ *
+ *
+ * The buffer for decompression in place is the length of the
+ * uncompressed data, plus a small amount extra to keep the algorithm safe.
+ * The compressed data is placed at the end of the buffer. The output
+ * pointer is placed at the start of the buffer and the input pointer
+ * is placed where the compressed data starts. Problems will occur
+ * when the output pointer overruns the input pointer.
+ *
+ * The output pointer can only overrun the input pointer if the input
+ * pointer is moving faster than the output pointer. A condition only
+ * triggered by data whose compressed form is larger than the uncompressed
+ * form.
+ *
+ * The worst case at the block level is a growth of the compressed data
+ * of 5 bytes per 32767 bytes.
+ *
+ * The worst case internal to a compressed block is very hard to figure.
+ * The worst case can at least be boundined by having one bit that represents
+ * 32764 bytes and then all of the rest of the bytes representing the very
+ * very last byte.
+ *
+ * All of which is enough to compute an amount of extra data that is required
+ * to be safe. To avoid problems at the block level allocating 5 extra bytes
+ * per 32767 bytes of data is sufficient. To avoind problems internal to a block
+ * adding an extra 32767 bytes (the worst case uncompressed block size) is
+ * sufficient, to ensure that in the worst case the decompressed data for
+ * block will stop the byte before the compressed data for a block begins.
+ * To avoid problems with the compressed data's meta information an extra 18
+ * bytes are needed. Leading to the formula:
+ *
+ * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
+ *
+ * Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
+ * Adding 32768 instead of 32767 just makes for round numbers.
+ * Adding the decompressor_size is necessary as it musht live after all
+ * of the data as well. Last I measured the decompressor is about 14K.
+ * 10K of actuall data and 4K of bss.
+ *
+ */
+
/*
* gzip declarations
*/
typedef unsigned short ush;
typedef unsigned long ulg;
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
+#define WSIZE 0x80000000 /* Window size must be at least 32k,
+ * and a power of two
+ * We don't actually have a window just
+ * a huge output buffer so I report
+ * a 2G windows size, as that should
+ * always be larger than our output buffer.
+ */
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
+static uch *inbuf; /* input buffer */
+static uch *window; /* Sliding window buffer, (and final output buffer) */
-static unsigned insize = 0; /* valid bytes in inbuf */
-static unsigned inptr = 0; /* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0; /* bytes in output buffer */
+static unsigned insize; /* valid bytes in inbuf */
+static unsigned inptr; /* index of next byte to be processed in inbuf */
+static unsigned outcnt; /* bytes in output buffer */
/* gzip flag byte */
#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
extern int input_len;
static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
static void *malloc(int size);
static void free(void *where);
static void putstr(const char *);
-extern int end;
-static long free_mem_ptr = (long)&end;
+static long free_mem_ptr;
static long free_mem_end_ptr;
-#define INPLACE_MOVE_ROUTINE 0x1000
-#define LOW_BUFFER_START 0x2000
-#define LOW_BUFFER_MAX 0x90000
-#define HEAP_SIZE 0x3000
-static unsigned int low_buffer_end, low_buffer_size;
-static int high_loaded =0;
-static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/;
+#define HEAP_SIZE 0x6000
static char *vidmem = (char *)0xb8000;
static int vidport;
*/
static int fill_inbuf(void)
{
- if (insize != 0) {
- error("ran out of input data");
- }
-
- inbuf = input_data;
- insize = input_len;
- inptr = 1;
- return inbuf[0];
+ error("ran out of input data");
+ return 0;
}
/* ===========================================================================
* Write the output window window[0..outcnt-1] and update crc and bytes_out.
* (Used for the decompressed data only.)
*/
-static void flush_window_low(void)
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
-}
-
-static void flush_window_high(void)
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, ch;
- in = window;
- for (n = 0; n < outcnt; n++) {
- ch = *output_data++ = *in++;
- if ((ulg)output_data == low_buffer_end) output_data=high_buffer_start;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- outcnt = 0;
-}
-
static void flush_window(void)
{
- if (high_loaded) flush_window_high();
- else flush_window_low();
+ /* With my window equal to my output buffer
+ * I only need to compute the crc here.
+ */
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, ch;
+
+ in = window;
+ for (n = 0; n < outcnt; n++) {
+ ch = *in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ outcnt = 0;
}
static void error(char *x)
while(1); /* Halt */
}
-static void setup_normal_output_buffer(void)
-{
-#ifdef STANDARD_MEMORY_BIOS_CALL
- if (RM_EXT_MEM_K < 1024) error("Less than 2MB of memory");
-#else
- if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < 1024) error("Less than 2MB of memory");
-#endif
- output_data = (unsigned char *)__PHYSICAL_START; /* Normally Points to 1M */
- free_mem_end_ptr = (long)real_mode;
-}
-
-struct moveparams {
- uch *low_buffer_start; int lcount;
- uch *high_buffer_start; int hcount;
-};
-
-static void setup_output_buffer_if_we_run_high(struct moveparams *mv)
-{
- high_buffer_start = (uch *)(((ulg)&end) + HEAP_SIZE);
-#ifdef STANDARD_MEMORY_BIOS_CALL
- if (RM_EXT_MEM_K < (3*1024)) error("Less than 4MB of memory");
-#else
- if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < (3*1024)) error("Less than 4MB of memory");
-#endif
- mv->low_buffer_start = output_data = (unsigned char *)LOW_BUFFER_START;
- low_buffer_end = ((unsigned int)real_mode > LOW_BUFFER_MAX
- ? LOW_BUFFER_MAX : (unsigned int)real_mode) & ~0xfff;
- low_buffer_size = low_buffer_end - LOW_BUFFER_START;
- high_loaded = 1;
- free_mem_end_ptr = (long)high_buffer_start;
- if ( (__PHYSICAL_START + low_buffer_size) > ((ulg)high_buffer_start)) {
- high_buffer_start = (uch *)(__PHYSICAL_START + low_buffer_size);
- mv->hcount = 0; /* say: we need not to move high_buffer */
- }
- else mv->hcount = -1;
- mv->high_buffer_start = high_buffer_start;
-}
-
-static void close_output_buffer_if_we_run_high(struct moveparams *mv)
-{
- if (bytes_out > low_buffer_size) {
- mv->lcount = low_buffer_size;
- if (mv->hcount)
- mv->hcount = bytes_out - low_buffer_size;
- } else {
- mv->lcount = bytes_out;
- mv->hcount = 0;
- }
-}
-
-int decompress_kernel(struct moveparams *mv, void *rmode)
+asmlinkage void decompress_kernel(void *rmode, unsigned long heap,
+ uch *input_data, unsigned long input_len, uch *output)
{
real_mode = rmode;
lines = RM_SCREEN_INFO.orig_video_lines;
cols = RM_SCREEN_INFO.orig_video_cols;
- if (free_mem_ptr < 0x100000) setup_normal_output_buffer();
- else setup_output_buffer_if_we_run_high(mv);
+ window = output; /* Output buffer (Normally at 1M) */
+ free_mem_ptr = heap; /* Heap */
+ free_mem_end_ptr = heap + HEAP_SIZE;
+ inbuf = input_data; /* Input buffer */
+ insize = input_len;
+ inptr = 0;
+
+ if ((ulg)output & 0x1fffffUL)
+ error("Destination address not 2M aligned");
+ if ((ulg)output >= 0xffffffffffUL)
+ error("Destination address too large");
makecrc();
putstr(".\nDecompressing Linux...");
gunzip();
putstr("done.\nBooting the kernel.\n");
- if (high_loaded) close_output_buffer_if_we_run_high(mv);
- return high_loaded;
+ return;
}
--- /dev/null
+OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
+OUTPUT_ARCH(i386:x86-64)
+ENTRY(startup_64)
+SECTIONS
+{
+ /* Be careful parts of head.S assume startup_32 is at
+ * address 0.
+ */
+ . = 0;
+ .text : {
+ _head = . ;
+ *(.text.head)
+ _ehead = . ;
+ *(.text.compressed)
+ _text = .; /* Text */
+ *(.text)
+ *(.text.*)
+ _etext = . ;
+ }
+ .rodata : {
+ _rodata = . ;
+ *(.rodata) /* read-only data */
+ *(.rodata.*)
+ _erodata = . ;
+ }
+ .data : {
+ _data = . ;
+ *(.data)
+ *(.data.*)
+ _edata = . ;
+ }
+ .bss : {
+ _bss = . ;
+ *(.bss)
+ *(.bss.*)
+ *(COMMON)
+ . = ALIGN(8);
+ _end = . ;
+ . = ALIGN(4096);
+ pgtable = . ;
+ . = . + 4096 * 6;
+ _heap = .;
+ }
+}
SECTIONS
{
- .data : {
+ .text.compressed : {
input_len = .;
- LONG(input_data_end - input_data) input_data = .;
- *(.data)
- input_data_end = .;
+ LONG(input_data_end - input_data) input_data = .;
+ *(.data)
+ output_len = . - 4;
+ input_data_end = .;
}
}
* Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
* Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
* Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
+ * Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com>
*/
#include <asm/page.h>
#include <asm/msr.h>
#include <asm/cache.h>
-
+
/* we are not able to switch in one step to the final KERNEL ADRESS SPACE
- * because we need identity-mapped pages on setup so define __START_KERNEL to
- * 0x100000 for this stage
- *
+ * because we need identity-mapped pages.
+ *
*/
.text
.section .bootstrap.text
- .code32
- .globl startup_32
-/* %bx: 1 if coming from smp trampoline on secondary cpu */
-startup_32:
-
+ .code64
+ .globl startup_64
+startup_64:
+
/*
- * At this point the CPU runs in 32bit protected mode (CS.D = 1) with
- * paging disabled and the point of this file is to switch to 64bit
- * long mode with a kernel mapping for kerneland to jump into the
- * kernel virtual addresses.
- * There is no stack until we set one up.
+ * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
+ * and someone has loaded an identity mapped page table
+ * for us. These identity mapped page tables map all of the
+ * kernel pages and possibly all of memory.
+ *
+ * %esi holds a physical pointer to real_mode_data.
+ *
+ * We come here either directly from a 64bit bootloader, or from
+ * arch/x86_64/boot/compressed/head.S.
+ *
+ * We only come here initially at boot nothing else comes here.
+ *
+ * Since we may be loaded at an address different from what we were
+ * compiled to run at we first fixup the physical addresses in our page
+ * tables and then reload them.
*/
- /* Initialize the %ds segment register */
- movl $__KERNEL_DS,%eax
- movl %eax,%ds
-
- /* Load new GDT with the 64bit segments using 32bit descriptor */
- lgdt pGDT32 - __START_KERNEL_map
-
- /* If the CPU doesn't support CPUID this will double fault.
- * Unfortunately it is hard to check for CPUID without a stack.
+ /* Compute the delta between the address I am compiled to run at and the
+ * address I am actually running at.
*/
-
- /* Check if extended functions are implemented */
- movl $0x80000000, %eax
- cpuid
- cmpl $0x80000000, %eax
- jbe no_long_mode
- /* Check if long mode is implemented */
- mov $0x80000001, %eax
- cpuid
- btl $29, %edx
- jnc no_long_mode
-
- /*
- * Prepare for entering 64bits mode
+ leaq _text(%rip), %rbp
+ subq $_text - __START_KERNEL_map, %rbp
+
+ /* Is the address not 2M aligned? */
+ movq %rbp, %rax
+ andl $~LARGE_PAGE_MASK, %eax
+ testl %eax, %eax
+ jnz bad_address
+
+ /* Is the address too large? */
+ leaq _text(%rip), %rdx
+ movq $PGDIR_SIZE, %rax
+ cmpq %rax, %rdx
+ jae bad_address
+
+ /* Fixup the physical addresses in the page table
*/
+ addq %rbp, init_level4_pgt + 0(%rip)
+ addq %rbp, init_level4_pgt + (258*8)(%rip)
+ addq %rbp, init_level4_pgt + (511*8)(%rip)
+
+ addq %rbp, level3_ident_pgt + 0(%rip)
+ addq %rbp, level3_kernel_pgt + (510*8)(%rip)
+
+ /* Add an Identity mapping if I am above 1G */
+ leaq _text(%rip), %rdi
+ andq $LARGE_PAGE_MASK, %rdi
+
+ movq %rdi, %rax
+ shrq $PUD_SHIFT, %rax
+ andq $(PTRS_PER_PUD - 1), %rax
+ jz ident_complete
+
+ leaq (level2_spare_pgt - __START_KERNEL_map + _KERNPG_TABLE)(%rbp), %rdx
+ leaq level3_ident_pgt(%rip), %rbx
+ movq %rdx, 0(%rbx, %rax, 8)
+
+ movq %rdi, %rax
+ shrq $PMD_SHIFT, %rax
+ andq $(PTRS_PER_PMD - 1), %rax
+ leaq __PAGE_KERNEL_LARGE_EXEC(%rdi), %rdx
+ leaq level2_spare_pgt(%rip), %rbx
+ movq %rdx, 0(%rbx, %rax, 8)
+ident_complete:
+
+ /* Fixup the kernel text+data virtual addresses
+ */
+ leaq level2_kernel_pgt(%rip), %rdi
+ leaq 4096(%rdi), %r8
+ /* See if it is a valid page table entry */
+1: testq $1, 0(%rdi)
+ jz 2f
+ addq %rbp, 0(%rdi)
+ /* Go to the next page */
+2: addq $8, %rdi
+ cmp %r8, %rdi
+ jne 1b
+
+ /* Fixup phys_base */
+ addq %rbp, phys_base(%rip)
- /* Enable PAE mode */
- xorl %eax, %eax
- btsl $5, %eax
- movl %eax, %cr4
-
- /* Setup early boot stage 4 level pagetables */
- movl $(init_level4_pgt - __START_KERNEL_map), %eax
- movl %eax, %cr3
-
- /* Setup EFER (Extended Feature Enable Register) */
- movl $MSR_EFER, %ecx
- rdmsr
-
- /* Enable Long Mode */
- btsl $_EFER_LME, %eax
-
- /* Make changes effective */
- wrmsr
+#ifdef CONFIG_SMP
+ addq %rbp, trampoline_level4_pgt + 0(%rip)
+ addq %rbp, trampoline_level4_pgt + (511*8)(%rip)
+#endif
+#ifdef CONFIG_ACPI_SLEEP
+ addq %rbp, wakeup_level4_pgt + 0(%rip)
+ addq %rbp, wakeup_level4_pgt + (511*8)(%rip)
+#endif
- xorl %eax, %eax
- btsl $31, %eax /* Enable paging and in turn activate Long Mode */
- btsl $0, %eax /* Enable protected mode */
- /* Make changes effective */
- movl %eax, %cr0
- /*
- * At this point we're in long mode but in 32bit compatibility mode
- * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
- * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use
- * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+ /* Due to ENTRY(), sometimes the empty space gets filled with
+ * zeros. Better take a jmp than relying on empty space being
+ * filled with 0x90 (nop)
*/
- ljmp $__KERNEL_CS, $(startup_64 - __START_KERNEL_map)
-
- .code64
- .org 0x100
- .globl startup_64
-startup_64:
+ jmp secondary_startup_64
ENTRY(secondary_startup_64)
- /* We come here either from startup_32
- * or directly from a 64bit bootloader.
- * Since we may have come directly from a bootloader we
- * reload the page tables here.
+ /*
+ * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
+ * and someone has loaded a mapped page table.
+ *
+ * %esi holds a physical pointer to real_mode_data.
+ *
+ * We come here either from startup_64 (using physical addresses)
+ * or from trampoline.S (using virtual addresses).
+ *
+ * Using virtual addresses from trampoline.S removes the need
+ * to have any identity mapped pages in the kernel page table
+ * after the boot processor executes this code.
*/
/* Enable PAE mode and PGE */
/* Setup early boot stage 4 level pagetables. */
movq $(init_level4_pgt - __START_KERNEL_map), %rax
+ addq phys_base(%rip), %rax
movq %rax, %cr3
+ /* Ensure I am executing from virtual addresses */
+ movq $1f, %rax
+ jmp *%rax
+1:
+
/* Check if nx is implemented */
movl $0x80000001, %eax
cpuid
/* Setup EFER (Extended Feature Enable Register) */
movl $MSR_EFER, %ecx
rdmsr
-
- /* Enable System Call */
- btsl $_EFER_SCE, %eax
-
- /* No Execute supported? */
- btl $20,%edi
+ btsl $_EFER_SCE, %eax /* Enable System Call */
+ btl $20,%edi /* No Execute supported? */
jnc 1f
btsl $_EFER_NX, %eax
-1:
- /* Make changes effective */
- wrmsr
+1: wrmsr /* Make changes effective */
/* Setup cr0 */
#define CR0_PM 1 /* protected mode */
* addresses where we're currently running on. We have to do that here
* because in 32bit we couldn't load a 64bit linear address.
*/
- lgdt cpu_gdt_descr
+ lgdt cpu_gdt_descr(%rip)
/* set up data segments. actually 0 would do too */
movl $__KERNEL_DS,%eax
init_rsp:
.quad init_thread_union+THREAD_SIZE-8
+bad_address:
+ jmp bad_address
+
ENTRY(early_idt_handler)
cmpl $2,early_recursion_flag(%rip)
jz 1f
early_idt_ripmsg:
.asciz "RIP %s\n"
-.code32
-ENTRY(no_long_mode)
- /* This isn't an x86-64 CPU so hang */
-1:
- jmp 1b
-
-.org 0xf00
- .globl pGDT32
-pGDT32:
- .word gdt_end-cpu_gdt_table-1
- .long cpu_gdt_table-__START_KERNEL_map
-
-.org 0xf10
-ljumpvector:
- .long startup_64-__START_KERNEL_map
- .word __KERNEL_CS
-
+.balign PAGE_SIZE
ENTRY(stext)
ENTRY(_stext)
* Don't set NX because code runs from these pages.
*/
PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD)
-
+
NEXT_PAGE(level2_kernel_pgt)
/* 40MB kernel mapping. The kernel code cannot be bigger than that.
When you change this change KERNEL_TEXT_SIZE in page.h too. */
/* Module mapping starts here */
.fill (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0
+NEXT_PAGE(level2_spare_pgt)
+ .fill 512,8,0
+
#undef PMDS
#undef NEXT_PAGE
.endr
#endif
+ENTRY(phys_base)
+ /* This must match the first entry in level2_kernel_pgt */
+ .quad 0x0000000000000000
+
/* We need valid kernel segments for data and code in long mode too
* IRET will check the segment types kkeil 2000/10/28
* Also sysret mandates a special GDT layout
jmp loop
done:
/* go back to the original page tables */
- leaq init_level4_pgt(%rip), %rax
- subq $__START_KERNEL_map, %rax
- movq %rax, %cr3
+ movq $(init_level4_pgt - __START_KERNEL_map), %rax
+ addq phys_base(%rip), %rax
+ movq %rax, %cr3
+
/* Flush TLB, including "global" things (vmalloc) */
movq mmu_cr4_features(%rip), %rax
movq %rax, %rdx
typedef struct { unsigned long pgprot; } pgprot_t;
+extern unsigned long phys_base;
+
#define pte_val(x) ((x).pte)
#define pmd_val(x) ((x).pmd)
#define pud_val(x) ((x).pud)
#define PAGE_OFFSET __PAGE_OFFSET
/* Note: __pa(&symbol_visible_to_c) should be always replaced with __pa_symbol.
- Otherwise you risk miscompilation. */
+ Otherwise you risk miscompilation. */
#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET)
/* __pa_symbol should be used for C visible symbols.
This seems to be the official gcc blessed way to do such arithmetic. */
#define __pa_symbol(x) \
({unsigned long v; \
asm("" : "=r" (v) : "0" (x)); \
- (v - __START_KERNEL_map); })
+ ((v - __START_KERNEL_map) + phys_base); })
#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET))
#ifdef CONFIG_FLATMEM
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff