Tested on DM6446, DM355, DM6447, DA850 EVMs.
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
I2C_BOARD_INFO("24c256", 0x50),
.platform_data = &da830_evm_i2c_eeprom_info,
},
+ {
+ I2C_BOARD_INFO("tlv320aic3x", 0x18),
+ }
};
static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
.resource = da850_evm_nandflash_resource,
};
+static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("tlv320aic3x", 0x18),
+ }
+};
+
static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
.bus_freq = 100, /* kHz */
.bus_delay = 0, /* usec */
davinci_serial_init(&da850_evm_uart_config);
+ i2c_register_board_info(1, da850_evm_i2c_devices,
+ ARRAY_SIZE(da850_evm_i2c_devices));
+
/*
* shut down uart 0 and 1; they are not used on the board and
* accessing them causes endless "too much work in irq53" messages
{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
.platform_data = dm355evm_mmcsd_gpios,
/* plus irq */ },
- /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+ { I2C_BOARD_INFO("tlv320aic33", 0x1b), },
/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
};
I2C_BOARD_INFO("24c256", 0x50),
.platform_data = &eeprom_info,
},
+ {
+ I2C_BOARD_INFO("tlv320aic33", 0x1b),
+ },
/* ALSO:
- * - tvl320aic33 audio codec (0x1b)
* - tvp5146 video decoder (0x5d)
*/
};
{
I2C_BOARD_INFO("cpld_reg0", 0x3a),
},
+ {
+ I2C_BOARD_INFO("tlv320aic33", 0x18),
+ }
};
static struct davinci_i2c_platform_data i2c_pdata = {