net: phy: Add MAC-IF driver for Microsemi PHYs.
authorRaju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Mon, 19 Sep 2016 10:03:54 +0000 (15:33 +0530)
committerDavid S. Miller <davem@davemloft.net>
Tue, 20 Sep 2016 08:39:23 +0000 (04:39 -0400)
All the review comments updated and resending for review.

This is MAC interface feature.
Microsemi PHY can support RGMII, RMII or GMII/MII interface between MAC and PHY.
MAC-IF function program the right value based on Device tree configuration.

Tested on Beaglebone Black with VSC 8531 PHY.

Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/phy/mscc.c

index c09cc4a3d1661622ec6fcfdae13557000c26246f..d350debd174a6b171ced13c9889b5193c0a5eb4d 100644 (file)
@@ -23,6 +23,16 @@ enum rgmii_rx_clock_delay {
        RGMII_RX_CLK_DELAY_3_4_NS = 7
 };
 
+/* Microsemi VSC85xx PHY registers */
+/* IEEE 802. Std Registers */
+#define MSCC_PHY_EXT_PHY_CNTL_1           23
+#define MAC_IF_SELECTION_MASK             0x1800
+#define MAC_IF_SELECTION_GMII             0
+#define MAC_IF_SELECTION_RMII             1
+#define MAC_IF_SELECTION_RGMII            2
+#define MAC_IF_SELECTION_POS              11
+#define FAR_END_LOOPBACK_MODE_MASK        0x0008
+
 #define MII_VSC85XX_INT_MASK             25
 #define MII_VSC85XX_INT_MASK_MASK        0xa000
 #define MII_VSC85XX_INT_STATUS           26
@@ -48,6 +58,42 @@ static int vsc85xx_phy_page_set(struct phy_device *phydev, u8 page)
        return rc;
 }
 
+static int vsc85xx_mac_if_set(struct phy_device *phydev,
+                             phy_interface_t interface)
+{
+       int rc;
+       u16 reg_val;
+
+       mutex_lock(&phydev->lock);
+       reg_val = phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_1);
+       reg_val &= ~(MAC_IF_SELECTION_MASK);
+       switch (interface) {
+       case PHY_INTERFACE_MODE_RGMII:
+               reg_val |= (MAC_IF_SELECTION_RGMII << MAC_IF_SELECTION_POS);
+               break;
+       case PHY_INTERFACE_MODE_RMII:
+               reg_val |= (MAC_IF_SELECTION_RMII << MAC_IF_SELECTION_POS);
+               break;
+       case PHY_INTERFACE_MODE_MII:
+       case PHY_INTERFACE_MODE_GMII:
+               reg_val |= (MAC_IF_SELECTION_GMII << MAC_IF_SELECTION_POS);
+               break;
+       default:
+               rc = -EINVAL;
+               goto out_unlock;
+       }
+       rc = phy_write(phydev, MSCC_PHY_EXT_PHY_CNTL_1, reg_val);
+       if (rc != 0)
+               goto out_unlock;
+
+       rc = genphy_soft_reset(phydev);
+
+out_unlock:
+       mutex_unlock(&phydev->lock);
+
+       return rc;
+}
+
 static int vsc85xx_default_config(struct phy_device *phydev)
 {
        int rc;
@@ -77,6 +123,11 @@ static int vsc85xx_config_init(struct phy_device *phydev)
        rc = vsc85xx_default_config(phydev);
        if (rc)
                return rc;
+
+       rc = vsc85xx_mac_if_set(phydev, phydev->interface);
+       if (rc)
+               return rc;
+
        rc = genphy_config_init(phydev);
 
        return rc;