axnet_cs: fix resume problem for some Ax88790 chip

axnet_cs:
    Some Ax88790 chip need to reinitialize the CISREG_CCSR register
    after resume.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index d2e166e29dda2ea5e972526a89af60097221fa0a..8a4d19e5de064bd3fbbb11a2d2e916a28cf593b0 100644 (file)
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -111,13 +111,14 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id);
 
 typedef struct axnet_dev_t {
        struct pcmcia_device    *p_dev;
-    caddr_t            base;
-    struct timer_list  watchdog;
-    int                        stale, fast_poll;
-    u_short            link_status;
-    u_char             duplex_flag;
-    int                        phy_id;
-    int                        flags;
+       caddr_t base;
+       struct timer_list       watchdog;
+       int     stale, fast_poll;
+       u_short link_status;
+       u_char  duplex_flag;
+       int     phy_id;
+       int     flags;
+       int     active_low;
 } axnet_dev_t;
 
 static inline axnet_dev_t *PRIV(struct net_device *dev)
@@ -322,6 +323,8 @@ static int axnet_config(struct pcmcia_device *link)
     if (info->flags & IS_AX88790)
        outb(0x10, dev->base_addr + AXNET_GPIO);  /* select Internal PHY */
 
+    info->active_low = 0;
+
     for (i = 0; i < 32; i++) {
        j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
        j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
@@ -329,15 +332,18 @@ static int axnet_config(struct pcmcia_device *link)
        if ((j != 0) && (j != 0xffff)) break;
     }
 
-    /* Maybe PHY is in power down mode. (PPD_SET = 1) 
-       Bit 2 of CCSR is active low. */ 
     if (i == 32) {
+       /* Maybe PHY is in power down mode. (PPD_SET = 1)
+          Bit 2 of CCSR is active low. */
        pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
        for (i = 0; i < 32; i++) {
            j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
            j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
            if (j == j2) continue;
-           if ((j != 0) && (j != 0xffff)) break;
+           if ((j != 0) && (j != 0xffff)) {
+               info->active_low = 1;
+               break;
+           }
        }
     }
 
@@ -383,8 +389,12 @@ static int axnet_suspend(struct pcmcia_device *link)
 static int axnet_resume(struct pcmcia_device *link)
 {
        struct net_device *dev = link->priv;
+       axnet_dev_t *info = PRIV(dev);
 
        if (link->open) {
+               if (info->active_low == 1)
+                       pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
+
                axnet_reset_8390(dev);
                AX88190_init(dev, 1);
                netif_device_attach(dev);