sh: mach-ecovec24: Add FSI sound support

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 89c5a715d0b6ad538c7224da5a0779130edc6eb9..194aaca22d4758e4860e22596c3945e3091a1227 100644 (file)
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -27,6 +27,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
 #include <video/sh_mobile_lcdc.h>
+#include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
 #include <media/tw9910.h>
 #include <media/mt9t112.h>
@@ -344,6 +345,12 @@ static struct platform_device ceu1_device = {
 };
 
 /* I2C device */
+static struct i2c_board_info i2c0_devices[] = {
+       {
+               I2C_BOARD_INFO("da7210", 0x1a),
+       },
+};
+
 static struct i2c_board_info i2c1_devices[] = {
        {
                I2C_BOARD_INFO("r2025sd", 0x32),
@@ -679,6 +686,69 @@ static struct platform_device camera_devices[] = {
        },
 };
 
+/* FSI */
+/*
+ * FSI-B use external clock which came from da7210.
+ * So, we should change parent of fsi
+ */
+#define FCLKBCR                0xa415000c
+static void fsimck_init(struct clk *clk)
+{
+       u32 status = ctrl_inl(clk->enable_reg);
+
+       /* use external clock */
+       status &= ~0x000000ff;
+       status |= 0x00000080;
+
+       ctrl_outl(status, clk->enable_reg);
+}
+
+static struct clk_ops fsimck_clk_ops = {
+       .init = fsimck_init,
+};
+
+static struct clk fsimckb_clk = {
+       .name           = "fsimckb_clk",
+       .id             = -1,
+       .ops            = &fsimck_clk_ops,
+       .enable_reg     = (void __iomem *)FCLKBCR,
+       .rate           = 0, /* unknown */
+};
+
+struct sh_fsi_platform_info fsi_info = {
+       .portb_flags = SH_FSI_BRS_INV |
+                      SH_FSI_OUT_SLAVE_MODE |
+                      SH_FSI_IN_SLAVE_MODE |
+                      SH_FSI_OFMT(I2S) |
+                      SH_FSI_IFMT(I2S),
+};
+
+static struct resource fsi_resources[] = {
+       [0] = {
+               .name   = "FSI",
+               .start  = 0xFE3C0000,
+               .end    = 0xFE3C021d,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = 108,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device fsi_device = {
+       .name           = "sh_fsi",
+       .id             = 0,
+       .num_resources  = ARRAY_SIZE(fsi_resources),
+       .resource       = fsi_resources,
+       .dev    = {
+               .platform_data  = &fsi_info,
+       },
+       .archdata = {
+               .hwblk_id = HWBLK_SPU, /* FSI needs SPU hwblk */
+       },
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
        &heartbeat_device,
        &nor_flash_device,
@@ -698,6 +768,7 @@ static struct platform_device *ecovec_devices[] __initdata = {
        &camera_devices[0],
        &camera_devices[1],
        &camera_devices[2],
+       &fsi_device,
 };
 
 #define EEPROM_ADDR 0x50
@@ -753,6 +824,8 @@ extern char ecovec24_sdram_leave_end;
 
 static int __init arch_setup(void)
 {
+       struct clk *clk;
+
        /* register board specific self-refresh code */
        sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
                                        &ecovec24_sdram_enter_start,
@@ -1020,7 +1093,32 @@ static int __init arch_setup(void)
        gpio_direction_output(GPIO_PTA3, 0);
        gpio_direction_output(GPIO_PTA4, 0);
 
+       /* enable FSI */
+       gpio_request(GPIO_FN_FSIMCKB,    NULL);
+       gpio_request(GPIO_FN_FSIIBSD,    NULL);
+       gpio_request(GPIO_FN_FSIOBSD,    NULL);
+       gpio_request(GPIO_FN_FSIIBBCK,   NULL);
+       gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
+       gpio_request(GPIO_FN_FSIOBBCK,   NULL);
+       gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
+       gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+
+       /* change parent of FSI B */
+       clk = clk_get(NULL, "fsib_clk");
+       clk_register(&fsimckb_clk);
+       clk_set_parent(clk, &fsimckb_clk);
+       clk_set_rate(clk, 11000);
+       clk_set_rate(&fsimckb_clk, 11000);
+       clk_put(clk);
+
+       gpio_request(GPIO_PTU0, NULL);
+       gpio_direction_output(GPIO_PTU0, 0);
+       mdelay(20);
+
        /* enable I2C device */
+       i2c_register_board_info(0, i2c0_devices,
+                               ARRAY_SIZE(i2c0_devices));
+
        i2c_register_board_info(1, i2c1_devices,
                                ARRAY_SIZE(i2c1_devices));