[ARM] ARMv7 errata: only apply fixes when running on applicable CPU

Currently, whenever an erratum workaround is enabled, it will be
applied whether or not the erratum is relevent for the CPU.  This
patch changes this - we check the variant and revision fields in the
main ID register to determine which errata to apply.

We also avoid re-applying erratum 460075 if it has already been applied.
Applying this fix in non-secure mode results in the kernel failing to
boot (or even do anything.)

This fixes booting on some ARMv7 based platforms which otherwise
silently fail.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 3397f1e64d76378d676d7c7e9f517bde86cff9ad..a08d9d2380d3e357dedbf743111e0eac45721b09 100644 (file)
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -184,23 +184,37 @@ __v7_setup:
        stmia   r12, {r0-r5, r7, r9, r11, lr}
        bl      v7_flush_dcache_all
        ldmia   r12, {r0-r5, r7, r9, r11, lr}
+
+       mrc     p15, 0, r0, c0, c0, 0           @ read main ID register
+       and     r10, r0, #0xff000000            @ ARM?
+       teq     r10, #0x41000000
+       bne     2f
+       and     r5, r0, #0x00f00000             @ variant
+       and     r6, r0, #0x0000000f             @ revision
+       orr     r0, r6, r5, lsr #20-4           @ combine variant and revision
+
 #ifdef CONFIG_ARM_ERRATA_430973
-       mrc     p15, 0, r10, c1, c0, 1          @ read aux control register
-       orr     r10, r10, #(1 << 6)             @ set IBE to 1
-       mcr     p15, 0, r10, c1, c0, 1          @ write aux control register
+       teq     r5, #0x00100000                 @ only present in r1p*
+       mrceq   p15, 0, r10, c1, c0, 1          @ read aux control register
+       orreq   r10, r10, #(1 << 6)             @ set IBE to 1
+       mcreq   p15, 0, r10, c1, c0, 1          @ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_458693
-       mrc     p15, 0, r10, c1, c0, 1          @ read aux control register
-       orr     r10, r10, #(1 << 5)             @ set L1NEON to 1
-       orr     r10, r10, #(1 << 9)             @ set PLDNOP to 1
-       mcr     p15, 0, r10, c1, c0, 1          @ write aux control register
+       teq     r0, #0x20                       @ only present in r2p0
+       mrceq   p15, 0, r10, c1, c0, 1          @ read aux control register
+       orreq   r10, r10, #(1 << 5)             @ set L1NEON to 1
+       orreq   r10, r10, #(1 << 9)             @ set PLDNOP to 1
+       mcreq   p15, 0, r10, c1, c0, 1          @ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_460075
-       mrc     p15, 1, r10, c9, c0, 2          @ read L2 cache aux ctrl register
-       orr     r10, r10, #(1 << 22)            @ set the Write Allocate disable bit
-       mcr     p15, 1, r10, c9, c0, 2          @ write the L2 cache aux ctrl register
+       teq     r0, #0x20                       @ only present in r2p0
+       mrceq   p15, 1, r10, c9, c0, 2          @ read L2 cache aux ctrl register
+       tsteq   r10, #1 << 22
+       orreq   r10, r10, #(1 << 22)            @ set the Write Allocate disable bit
+       mcreq   p15, 1, r10, c9, c0, 2          @ write the L2 cache aux ctrl register
 #endif
-       mov     r10, #0
+
+2:     mov     r10, #0
 #ifdef HARVARD_CACHE
        mcr     p15, 0, r10, c7, c5, 0          @ I+BTB cache invalidate
 #endif