buf = kzalloc(count + HCI_HEADER_LENGTH, GFP_ATOMIC);
if (!buf) {
- err("%s- kzalloc(%d) failed.", __func__,
- count + HCI_HEADER_LENGTH);
+ dev_err(&port->dev, "%s- kzalloc(%d) failed.\n",
+ __func__, count + HCI_HEADER_LENGTH);
return;
}
if (!tty) {
schedule_work(&priv->rx_work);
- err("%s - No tty available", __func__);
+ dev_err(&port->dev, "%s - No tty available\n", __func__);
return ;
}
priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL);
if (!priv) {
- err("%s- kmalloc(%Zd) failed.", __func__,
+ dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
sizeof(struct aircable_private));
return -ENOMEM;
}
port->read_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (retval) {
- err("usb_submit_urb(read bulk) failed");
+ dev_err(&port->dev, "usb_submit_urb(read bulk) failed\n");
goto exit;
}
retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (retval) {
usb_kill_urb(port->read_urb);
- err(" usb_submit_urb(read int) failed");
+ dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
}
exit:
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
- err("%s - usb_submit_urb failed with result %d",
- __func__, retval);
+ dev_err(&port->dev, "%s - usb_submit_urb failed with "
+ "result %d\n", __func__, retval);
}
static void belkin_sa_set_termios(struct tty_struct *tty,
if ((old_cflag & CBAUD) == B0) {
control_state |= (TIOCM_DTR|TIOCM_RTS);
if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0)
- err("Set DTR error");
+ dev_err(&port->dev, "Set DTR error\n");
/* don't set RTS if using hardware flow control */
if (!(old_cflag & CRTSCTS))
if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST
, 1) < 0)
- err("Set RTS error");
+ dev_err(&port->dev, "Set RTS error\n");
}
}
/* Report the actual baud rate back to the caller */
tty_encode_baud_rate(tty, baud, baud);
if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0)
- err("Set baudrate error");
+ dev_err(&port->dev, "Set baudrate error\n");
} else {
/* Disable flow control */
if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST,
BELKIN_SA_FLOW_NONE) < 0)
- err("Disable flowcontrol error");
+ dev_err(&port->dev, "Disable flowcontrol error\n");
/* Drop RTS and DTR */
control_state &= ~(TIOCM_DTR | TIOCM_RTS);
if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0) < 0)
- err("DTR LOW error");
+ dev_err(&port->dev, "DTR LOW error\n");
if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0) < 0)
- err("RTS LOW error");
+ dev_err(&port->dev, "RTS LOW error\n");
}
/* set the parity */
else
urb_value = BELKIN_SA_PARITY_NONE;
if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0)
- err("Set parity error");
+ dev_err(&port->dev, "Set parity error\n");
}
/* set the number of data bits */
break;
}
if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0)
- err("Set data bits error");
+ dev_err(&port->dev, "Set data bits error\n");
}
/* set the number of stop bits */
: BELKIN_SA_STOP_BITS(1);
if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST,
urb_value) < 0)
- err("Set stop bits error");
+ dev_err(&port->dev, "Set stop bits error\n");
}
/* Set flow control */
urb_value &= ~(BELKIN_SA_FLOW_IRTS);
if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value) < 0)
- err("Set flow control error");
+ dev_err(&port->dev, "Set flow control error\n");
}
/* save off the modified port settings */
struct usb_serial *serial = port->serial;
if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0)
- err("Set break_ctl %d", break_state);
+ dev_err(&port->dev, "Set break_ctl %d\n", break_state);
}
retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts);
if (retval < 0) {
- err("Set RTS error %d", retval);
+ dev_err(&port->dev, "Set RTS error %d\n", retval);
goto exit;
}
retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr);
if (retval < 0) {
- err("Set DTR error %d", retval);
+ dev_err(&port->dev, "Set DTR error %d\n", retval);
goto exit;
}
exit:
result = usb_submit_urb(serial->port[i]->interrupt_in_urb,
GFP_KERNEL);
if (result)
- err(" usb_submit_urb(read int) failed");
+ dev_err(&serial->dev->dev,
+ "usb_submit_urb(read int) failed\n");
dbg("%s - usb_submit_urb(int urb)", __func__);
}
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d",
+ __func__, result);
/* Throw away data. No better idea what to do with it. */
priv->wrfilled = 0;
priv->wrsent = 0;
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d", __func__, result);
+ dev_err(&port->dev, "%s - failed resubmitting "
+ "read urb, error %d\n",
+ __func__, result);
dbg("%s - usb_submit_urb(read urb)", __func__);
}
}
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result)
- err(" usb_submit_urb(read int) failed");
+ dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
dbg("%s - usb_submit_urb(int urb)", __func__);
}
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev, "%s - failed resubmitting read "
+ "urb, error %d\n", __func__, result);
dbg("%s - usb_submit_urb(read urb)", __func__);
}
}
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
/* Throw away data. No better idea what to do with it. */
priv->wrfilled = 0;
priv->wrsent = 0;
retval != -ENODEV);
if (retval != sizeof(feature_buffer)) {
- err("%s - failed sending serial line settings - %d",
- __func__, retval);
+ dev_err(&port->dev, "%s - failed sending serial "
+ "line settings - %d\n", __func__, retval);
cypress_set_dead(port);
} else {
spin_lock_irqsave(&priv->lock, flags);
&& retval != -ENODEV);
if (retval != sizeof(feature_buffer)) {
- err("%s - failed to retrieve serial line settings - %d", __func__, retval);
+ dev_err(&port->dev, "%s - failed to retrieve serial "
+ "line settings - %d\n", __func__, retval);
cypress_set_dead(port);
return retval;
} else {
priv->comm_is_ok = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- err("cypress_m8 suspending failing port %d - interval might be too short",
- port->number);
+ dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
+ "interval might be too short\n", port->number);
}
/* setup the port and start reading from the device */
if (!port->interrupt_in_urb) {
- err("%s - interrupt_in_urb is empty!", __func__);
+ dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n",
+ __func__);
return -1;
}
data_bits = 3;
break;
default:
- err("%s - CSIZE was set, but not CS5-CS8",
- __func__);
+ dev_err(&port->dev, "%s - CSIZE was set, but not CS5-CS8\n",
+ __func__);
data_bits = 3;
}
spin_lock_irqsave(&priv->lock, flags);
}
spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
if (ret)
- err("%s: usb_submit_urb failed, ret=%d", __func__, ret);
+ dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
+ __func__, ret);
return ret;
}
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
if (ret)
- err("%s: usb_submit_urb failed, ret=%d, port=%d",
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
return ret;
}
spin_unlock(&port_priv->dp_port_lock);
spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
if (ret)
- err("%s: usb_submit_urb failed, ret=%d", __func__, ret);
+ dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
+ __func__, ret);
return ret;
}
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
if (ret)
- err("%s: usb_submit_urb failed, ret=%d, port=%d",
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
}
/* return length of new data written, or error */
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
if (ret < 0)
- err("%s: usb_submit_urb failed, ret=%d, port=%d",
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
dbg("digi_write: returning %d", ret);
return ret;
/* port and serial sanity check */
if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
- err("%s: port or port->private is NULL, status=%d",
- __func__, status);
+ dev_err(&port->dev,
+ "%s: port or port->private is NULL, status=%d\n",
+ __func__, status);
return;
}
serial = port->serial;
if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
- err("%s: serial or serial->private is NULL, status=%d",
- __func__, status);
+ dev_err(&port->dev,
+ "%s: serial or serial->private is NULL, status=%d\n",
+ __func__, status);
return;
}
spin_unlock(&priv->dp_port_lock);
if (ret)
- err("%s: usb_submit_urb failed, ret=%d, port=%d",
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
}
port->write_urb->dev = port->serial->dev;
ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (ret != 0) {
- err("%s: usb_submit_urb failed, ret=%d, port=%d",
- __func__, ret, i);
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
+ __func__, ret, i);
break;
}
}
dbg("digi_read_bulk_callback: TOP");
/* port sanity check, do not resubmit if port is not valid */
- if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
- err("%s: port or port->private is NULL, status=%d",
- __func__, status);
+ if (port == NULL)
+ return;
+ priv = usb_get_serial_port_data(port);
+ if (priv == NULL) {
+ dev_err(&port->dev, "%s: port->private is NULL, status=%d\n",
+ __func__, status);
return;
}
if (port->serial == NULL ||
(serial_priv = usb_get_serial_data(port->serial)) == NULL) {
- err("%s: serial is bad or serial->private is NULL, status=%d",
- __func__, status);
+ dev_err(&port->dev, "%s: serial is bad or serial->private "
+ "is NULL, status=%d\n", __func__, status);
return;
}
/* do not resubmit urb if it has any status error */
if (status) {
- err("%s: nonzero read bulk status: status=%d, port=%d",
- __func__, status, priv->dp_port_num);
+ dev_err(&port->dev,
+ "%s: nonzero read bulk status: status=%d, port=%d\n",
+ __func__, status, priv->dp_port_num);
return;
}
urb->dev = port->serial->dev;
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret != 0) {
- err("%s: failed resubmitting urb, ret=%d, port=%d",
- __func__, ret, priv->dp_port_num);
+ dev_err(&port->dev,
+ "%s: failed resubmitting urb, ret=%d, port=%d\n",
+ __func__, ret, priv->dp_port_num);
}
}
/* short/multiple packet check */
if (urb->actual_length != len + 2) {
- err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, "
- "port=%d, opcode=%d, len=%d, actual_length=%d, "
- "status=%d", __func__, status, priv->dp_port_num,
- opcode, len, urb->actual_length, port_status);
+ dev_err(&port->dev, "%s: INCOMPLETE OR MULTIPLE PACKET, "
+ "urb->status=%d, port=%d, opcode=%d, len=%d, "
+ "actual_length=%d, status=%d\n", __func__, status,
+ priv->dp_port_num, opcode, len, urb->actual_length,
+ port_status);
return -1;
}
dbg("%s", __func__);
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
- err("active config #%d != 1 ??",
+ dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
serial->dev->actconfig->desc.bConfigurationValue);
return -ENODEV;
}
urb = usb_alloc_urb(0, GFP_KERNEL);
write_urb_pool[i] = urb;
if (urb == NULL) {
- err("No more urbs???");
+ printk(KERN_ERR "empeg: No more urbs???\n");
continue;
}
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s - out of memory for urb buffers.",
- __func__);
+ printk(KERN_ERR "empeg: %s - out of memory for urb "
+ "buffers.", __func__);
continue;
}
}
/* dbg("ezusb_writememory %x, %d", address, length); */
if (!serial->dev) {
- err("%s - no physical device present, failing.", __func__);
+ printk(KERN_ERR "ezusb: %s - no physical device present, "
+ "failing.\n", __func__);
return -ENODEV;
}
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
if (!priv) {
- err("%s- kmalloc(%Zd) failed.", __func__,
+ dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
sizeof(struct ftdi_private));
return -ENOMEM;
}
ftdi_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
- err("%s - failed submitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
return result;
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface, buf, 0,
WDR_TIMEOUT) < 0) {
- err("error from flowcontrol urb");
+ dev_err(&port->dev, "error from flowcontrol urb\n");
}
/* drop RTS and DTR */
buffer = kmalloc(transfer_size, GFP_ATOMIC);
if (!buffer) {
- err("%s ran out of kernel memory for urb ...", __func__);
+ dev_err(&port->dev,
+ "%s ran out of kernel memory for urb ...\n", __func__);
count = -ENOMEM;
goto error_no_buffer;
}
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
- err("%s - no more free urbs", __func__);
+ dev_err(&port->dev, "%s - no more free urbs\n", __func__);
count = -ENOMEM;
goto error_no_urb;
}
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
- err("%s - failed submitting write urb, error %d",
- __func__, status);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, status);
count = status;
goto error;
} else {
buffered = (int)priv->tx_outstanding_bytes;
spin_unlock_irqrestore(&priv->tx_lock, flags);
if (buffered < 0) {
- err("%s outstanding tx bytes is negative!", __func__);
+ dev_err(&port->dev, "%s outstanding tx bytes is negative!\n",
+ __func__);
buffered = 0;
}
return buffered;
int status = urb->status;
if (urb->number_of_packets > 0) {
- err("%s transfer_buffer_length %d actual_length %d number of packets %d",
- __func__,
- urb->transfer_buffer_length,
- urb->actual_length, urb->number_of_packets);
- err("%s transfer_flags %x ", __func__, urb->transfer_flags);
+ dev_err(&port->dev, "%s transfer_buffer_length %d "
+ "actual_length %d number of packets %d\n", __func__,
+ urb->transfer_buffer_length,
+ urb->actual_length, urb->number_of_packets);
+ dev_err(&port->dev, "%s transfer_flags %x\n", __func__,
+ urb->transfer_flags);
}
dbg("%s - port %d", __func__, port->number);
}
if (urb != port->read_urb)
- err("%s - Not my urb!", __func__);
+ dev_err(&port->dev, "%s - Not my urb!\n", __func__);
if (status) {
/* This will happen at close every time so it is a dbg not an
length = min(PKTSZ, urb->actual_length-packet_offset)-2;
if (length < 0) {
- err("%s - bad packet length: %d", __func__, length+2);
+ dev_err(&port->dev, "%s - bad packet length: %d\n",
+ __func__, length+2);
length = 0;
}
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
}
out:
tty_kref_put(tty);
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
buf, 0, WDR_TIMEOUT) < 0) {
- err("%s FAILED to enable/disable break state (state was %d)",
- __func__, break_state);
+ dev_err(&port->dev, "%s FAILED to enable/disable break state "
+ "(state was %d)\n", __func__, break_state);
}
dbg("%s break state is %d - urb is %d", __func__,
case CS7: urb_value |= 7; dbg("Setting CS7"); break;
case CS8: urb_value |= 8; dbg("Setting CS8"); break;
default:
- err("CSIZE was set but not CS5-CS8");
+ dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n");
}
}
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
buf, 0, WDR_SHORT_TIMEOUT) < 0) {
- err("%s FAILED to set databits/stopbits/parity", __func__);
+ dev_err(&port->dev, "%s FAILED to set "
+ "databits/stopbits/parity\n", __func__);
}
/* Now do the baudrate */
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface,
buf, 0, WDR_TIMEOUT) < 0) {
- err("%s error from disable flowcontrol urb", __func__);
+ dev_err(&port->dev,
+ "%s error from disable flowcontrol urb\n",
+ __func__);
}
/* Drop RTS and DTR */
clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
} else {
/* set the baudrate determined before */
if (change_speed(tty, port))
- err("%s urb failed to set baudrate", __func__);
+ dev_err(&port->dev, "%s urb failed to set baudrate\n",
+ __func__);
/* Ensure RTS and DTR are raised when baudrate changed from 0 */
if (!old_termios || (old_termios->c_cflag & CBAUD) == B0)
set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
buf, 0, WDR_TIMEOUT) < 0) {
- err("urb failed to set to rts/cts flow control");
+ dev_err(&port->dev,
+ "urb failed to set to rts/cts flow control\n");
}
} else {
urb_value , (FTDI_SIO_XON_XOFF_HS
| priv->interface),
buf, 0, WDR_TIMEOUT) < 0) {
- err("urb failed to set to xon/xoff flow control");
+ dev_err(&port->dev, "urb failed to set to "
+ "xon/xoff flow control\n");
}
} else {
/* else clause to only run if cflag ! CRTSCTS and iflag
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface,
buf, 0, WDR_TIMEOUT) < 0) {
- err("urb failed to clear flow control");
+ dev_err(&port->dev,
+ "urb failed to clear flow control\n");
}
}
edge_serial->interrupt_read_urb =
usb_alloc_urb(0, GFP_KERNEL);
if (!edge_serial->interrupt_read_urb) {
- err("out of memory");
+ dev_err(&dev->dev, "out of memory\n");
return -ENOMEM;
}
edge_serial->interrupt_in_buffer =
kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->interrupt_in_buffer) {
- err("out of memory");
+ dev_err(&dev->dev, "out of memory\n");
usb_free_urb(edge_serial->interrupt_read_urb);
return -ENOMEM;
}
edge_serial->read_urb =
usb_alloc_urb(0, GFP_KERNEL);
if (!edge_serial->read_urb) {
- err("out of memory");
+ dev_err(&dev->dev, "out of memory\n");
return -ENOMEM;
}
edge_serial->bulk_in_buffer =
kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->bulk_in_buffer) {
- err("out of memory");
+ dev_err(&dev->dev, "out of memory\n");
usb_free_urb(edge_serial->read_urb);
return -ENOMEM;
}
}
if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
- err("Error - the proper endpoints were not found!");
+ dev_err(&dev->dev, "Error - the proper endpoints "
+ "were not found!\n");
return -ENODEV;
}
response = usb_submit_urb(edge_serial->interrupt_read_urb,
GFP_KERNEL);
if (response)
- err("%s - Error %d submitting control urb",
- __func__, response);
+ dev_err(&dev->dev,
+ "%s - Error %d submitting control urb\n",
+ __func__, response);
}
return response;
}
bytes_out = 0;
priv = kmalloc(sizeof(struct ipaq_private), GFP_KERNEL);
if (priv == NULL) {
- err("%s - Out of memory", __func__);
+ dev_err(&port->dev, "%s - Out of memory\n", __func__);
return -ENOMEM;
}
usb_set_serial_port_data(port, priv);
}
if (!retries && result) {
- err("%s - failed doing control urb, error %d", __func__,
- result);
+ dev_err(&port->dev, "%s - failed doing control urb, error %d\n", __func__, result);
goto error;
}
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result) {
- err("%s - failed submitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
goto error;
}
enomem:
result = -ENOMEM;
- err("%s - Out of memory", __func__);
+ dev_err(&port->dev, "%s - Out of memory\n", __func__);
error:
ipaq_destroy_lists(port);
kfree(priv);
ipaq_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
return;
}
spin_unlock_irqrestore(&write_list_lock, flags);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result)
- err("%s - failed submitting write urb, error %d",
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
__func__, result);
} else {
spin_unlock_irqrestore(&write_list_lock, flags);
spin_unlock_irqrestore(&write_list_lock, flags);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result)
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
} else {
priv->active = 0;
spin_unlock_irqrestore(&write_list_lock, flags);
{
dbg("%s", __func__);
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
- err("active config #%d != 1 ??",
+ dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
serial->dev->actconfig->desc.bConfigurationValue);
return -ENODEV;
}
fw_name = "keyspan_pda/xircom_pgs.fw";
#endif
else {
- err("%s: unknown vendor, aborting.", __func__);
+ dev_err(&serial->dev->dev, "%s: unknown vendor, aborting.\n",
+ __func__);
return -ENODEV;
}
if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) {
- err("failed to load firmware \"%s\"\n", fw_name);
+ dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
+ fw_name);
return -ENOENT;
}
record = (const struct ihex_binrec *)fw->data;
(unsigned char *)record->data,
be16_to_cpu(record->len), 0xa0);
if (response < 0) {
- err("ezusb_writememory failed for Keyspan PDA "
- "firmware (%d %04X %p %d)",
- response, be32_to_cpu(record->addr),
- record->data, be16_to_cpu(record->len));
+ dev_err(&serial->dev->dev, "ezusb_writememory failed "
+ "for Keyspan PDA firmware (%d %04X %p %d)\n",
+ response, be32_to_cpu(record->addr),
+ record->data, be16_to_cpu(record->len));
break;
}
record = ihex_next_binrec(record);
sizeof(struct klsi_105_port_settings),
KLSI_TIMEOUT);
if (rc < 0)
- err("Change port settings failed (error = %d)", rc);
+ dev_err(&port->dev,
+ "Change port settings failed (error = %d)\n", rc);
dev_info(&port->serial->dev->dev,
"%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n",
settings->pktlen, settings->baudrate, settings->databits,
10000
);
if (rc < 0)
- err("Reading line status failed (error = %d)", rc);
+ dev_err(&port->dev, "Reading line status failed (error = %d)\n",
+ rc);
else {
status = get_unaligned_le16(status_buf);
priv->write_urb_pool[j] = urb;
if (urb == NULL) {
- err("No more urbs???");
+ dev_err(&serial->dev->dev, "No more urbs???\n");
goto err_cleanup;
}
urb->transfer_buffer =
kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s - out of memory for urb buffers.",
- __func__);
+ dev_err(&serial->dev->dev,
+ "%s - out of memory for urb buffers.\n",
+ __func__);
goto err_cleanup;
}
}
rc = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (rc) {
- err("%s - failed submitting read urb, error %d", __func__, rc);
+ dev_err(&port->dev, "%s - failed submitting read urb, "
+ "error %d\n", __func__, rc);
retval = rc;
goto exit;
}
0,
KLSI_TIMEOUT);
if (rc < 0) {
- err("Enabling read failed (error = %d)", rc);
+ dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc);
retval = rc;
} else
dbg("%s - enabled reading", __func__);
NULL, 0,
KLSI_TIMEOUT);
if (rc < 0)
- err("Disabling read failed (error = %d)", rc);
+ dev_err(&port->dev,
+ "Disabling read failed (error = %d)\n", rc);
}
mutex_unlock(&port->serial->disc_mutex);
urb->transfer_buffer =
kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
if (urb->transfer_buffer == NULL) {
- err("%s - no more kernel memory...", __func__);
+ dev_err(&port->dev,
+ "%s - no more kernel memory...\n",
+ __func__);
goto exit;
}
}
/* send the data out the bulk port */
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
goto exit;
}
buf += size;
port);
rc = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (rc)
- err("%s - failed resubmitting read urb, error %d",
- __func__, rc);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, rc);
} /* klsi_105_read_bulk_callback */
priv->cfg.databits = kl5kusb105a_dtb_8;
break;
default:
- err("CSIZE was not CS5-CS8, using default of 8");
+ dev_err(&port->dev,
+ "CSIZE was not CS5-CS8, using default of 8\n");
priv->cfg.databits = kl5kusb105a_dtb_8;
break;
}
rc = klsi_105_get_line_state(port, &line_state);
if (rc < 0) {
- err("Reading line control failed (error = %d)", rc);
+ dev_err(&port->dev,
+ "Reading line control failed (error = %d)\n", rc);
/* better return value? EAGAIN? */
return rc;
}
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed submitting read urb, error %d", __func__,
- result);
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
}
0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE,
WDR_TIMEOUT);
if (rc < 0) /*FIXME: What value speed results */
- err("Set BAUD RATE %d failed (error = %d)", value, rc);
+ dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n",
+ value, rc);
else
tty_encode_baud_rate(tty, speed, speed);
dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor);
0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE,
WDR_TIMEOUT);
if (rc < 0)
- err("Sending USB device request code %d failed (error = %d)",
- MCT_U232_SET_UNKNOWN1_REQUEST, rc);
+ dev_err(&port->dev, "Sending USB device request code %d "
+ "failed (error = %d)\n", MCT_U232_SET_UNKNOWN1_REQUEST,
+ rc);
if (port && C_CRTSCTS(tty))
cts_enable_byte = 1;
0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE,
WDR_TIMEOUT);
if (rc < 0)
- err("Sending USB device request code %d failed (error = %d)",
- MCT_U232_SET_CTS_REQUEST, rc);
+ dev_err(&port->dev, "Sending USB device request code %d "
+ "failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc);
return rc;
} /* mct_u232_set_baud_rate */
0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE,
WDR_TIMEOUT);
if (rc < 0)
- err("Set LINE CTRL 0x%x failed (error = %d)", lcr, rc);
+ dev_err(&serial->dev->dev,
+ "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc);
dbg("set_line_ctrl: 0x%x", lcr);
return rc;
} /* mct_u232_set_line_ctrl */
0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE,
WDR_TIMEOUT);
if (rc < 0)
- err("Set MODEM CTRL 0x%x failed (error = %d)", mcr, rc);
+ dev_err(&serial->dev->dev,
+ "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
return rc;
0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE,
WDR_TIMEOUT);
if (rc < 0) {
- err("Get MODEM STATus failed (error = %d)", rc);
+ dev_err(&serial->dev->dev,
+ "Get MODEM STATus failed (error = %d)\n", rc);
*msr = 0;
}
dbg("get_modem_stat: 0x%x", *msr);
port->read_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (retval) {
- err("usb_submit_urb(read bulk) failed pipe 0x%x err %d",
- port->read_urb->pipe, retval);
+ dev_err(&port->dev,
+ "usb_submit_urb(read bulk) failed pipe 0x%x err %d\n",
+ port->read_urb->pipe, retval);
goto error;
}
retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (retval) {
usb_kill_urb(port->read_urb);
- err(" usb_submit_urb(read int) failed pipe 0x%x err %d",
- port->interrupt_in_urb->pipe, retval);
+ dev_err(&port->dev,
+ "usb_submit_urb(read int) failed pipe 0x%x err %d",
+ port->interrupt_in_urb->pipe, retval);
goto error;
}
return 0;
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
- err("%s - usb_submit_urb failed with result %d",
- __func__, retval);
+ dev_err(&port->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, retval);
} /* mct_u232_read_int_callback */
static void mct_u232_set_termios(struct tty_struct *tty,
case CS8:
last_lcr |= MCT_U232_DATA_BITS_8; break;
default:
- err("CSIZE was not CS5-CS8, using default of 8");
+ dev_err(&port->dev,
+ "CSIZE was not CS5-CS8, using default of 8\n");
last_lcr |= MCT_U232_DATA_BITS_8;
break;
}
mos7720_port->write_urb_pool[j] = urb;
if (urb == NULL) {
- err("No more urbs???");
+ dev_err(&port->dev, "No more urbs???\n");
continue;
}
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s-out of memory for urb buffers.", __func__);
+ dev_err(&port->dev,
+ "%s-out of memory for urb buffers.\n",
+ __func__);
usb_free_urb(mos7720_port->write_urb_pool[j]);
mos7720_port->write_urb_pool[j] = NULL;
continue;
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (urb->transfer_buffer == NULL) {
- err("%s no more kernel memory...", __func__);
+ dev_err(&port->dev, "%s no more kernel memory...\n",
+ __func__);
goto exit;
}
}
/* send it down the pipe */
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
- err("%s - usb_submit_urb(write bulk) failed with status = %d",
- __func__, status);
+ dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+ "with status = %d\n", __func__, status);
bytes_sent = status;
goto exit;
}
/* Calculate the Divisor */
status = calc_baud_rate_divisor(baudrate, &divisor);
if (status) {
- err("%s - bad baud rate", __func__);
+ dev_err(&port->dev, "%s - bad baud rate\n", __func__);
return status;
}
/* create our private serial structure */
mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL);
if (mos7720_serial == NULL) {
- err("%s - Out of memory", __func__);
+ dev_err(&dev->dev, "%s - Out of memory\n", __func__);
return -ENOMEM;
}
for (i = 0; i < serial->num_ports; ++i) {
mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7720_port == NULL) {
- err("%s - Out of memory", __func__);
+ dev_err(&dev->dev, "%s - Out of memory\n", __func__);
usb_set_serial_data(serial, NULL);
kfree(mos7720_serial);
return -ENOMEM;
mos7840_port->write_urb_pool[j] = urb;
if (urb == NULL) {
- err("No more urbs???");
+ dev_err(&port->dev, "No more urbs???\n");
continue;
}
if (!urb->transfer_buffer) {
usb_free_urb(urb);
mos7840_port->write_urb_pool[j] = NULL;
- err("%s-out of memory for urb buffers.", __func__);
+ dev_err(&port->dev,
+ "%s-out of memory for urb buffers.\n",
+ __func__);
continue;
}
}
usb_submit_urb(serial->port[0]->interrupt_in_urb,
GFP_KERNEL);
if (response) {
- err("%s - Error %d submitting interrupt urb",
- __func__, response);
+ dev_err(&port->dev, "%s - Error %d submitting "
+ "interrupt urb\n", __func__, response);
}
}
port->bulk_in_endpointAddress);
response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
if (response) {
- err("%s - Error %d submitting control urb", __func__,
- response);
+ dev_err(&port->dev, "%s - Error %d submitting control urb\n",
+ __func__, response);
}
/* initialize our wait queues */
kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
if (urb->transfer_buffer == NULL) {
- err("%s no more kernel memory...", __func__);
+ dev_err(&port->dev, "%s no more kernel memory...\n",
+ __func__);
goto exit;
}
}
if (status) {
mos7840_port->busy[i] = 0;
- err("%s - usb_submit_urb(write bulk) failed with status = %d",
- __func__, status);
+ dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+ "with status = %d\n", __func__, status);
bytes_sent = status;
goto exit;
}
/* Calculate the Divisor */
if (status) {
- err("%s - bad baud rate", __func__);
- dbg("%s\n", "bad baud rate");
+ dev_err(&port->dev, "%s - bad baud rate\n", __func__);
return status;
}
/* Enable access to divisor latch */
for (i = 0; i < serial->num_ports; ++i) {
mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7840_port == NULL) {
- err("%s - Out of memory", __func__);
+ dev_err(&dev->dev, "%s - Out of memory\n", __func__);
status = -ENOMEM;
i--; /* don't follow NULL pointer cleaning up */
goto error;
od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL);
if (!od) {
- err("%s- kmalloc(%Zd) failed.",
- __func__, sizeof(struct omninet_data));
+ dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n",
+ __func__, sizeof(struct omninet_data));
return -ENOMEM;
}
usb_set_serial_port_data(port, od);
omninet_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
- err("%s - failed submitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
return result;
}
omninet_read_bulk_callback, port);
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
return;
}
result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
if (result) {
wport->write_urb_busy = 0;
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
} else
result = count;
data, actual_length);
tty_flip_buffer_push(tty);
} else {
- err("%s - inconsistent lengths %d:%d",
+ dev_err(&port->dev,
+ "%s - inconsistent lengths %d:%d\n",
__func__, actual_length, length);
}
} else {
- err("%s - bad CRC %x", __func__, fcs);
+ dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);
}
} else {
tty_insert_flip_string(tty, data, length);
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
/* FIXME: Need a mechanism to retry later if this happens */
}
result = usb_submit_urb(port->write_urb, GFP_KERNEL);
if (result) {
port->write_urb_busy = 0;
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
return 0;
}
dbg("%s urb: %p submitted", __func__, port->write_urb);
case 1000000:
buf[0] = 0x0b; break;
default:
- err("spcp825 driver does not support the baudrate "
- "requested, using default of 9600.");
+ dev_err(&port->dev, "spcp825 driver does not support the "
+ "baudrate requested, using default of 9600.\n");
}
/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
uartdata, 0, NULL, 0, 100);
if (i < 0)
- err("Set UART format %#x failed (error = %d)", uartdata, i);
+ dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
+ uartdata, i);
dbg("0x21:0x40:0:0 %d\n", i);
if (cflag & CRTSCTS) {
result = bus_register(&usb_serial_bus_type);
if (result) {
- err("%s - registering bus driver failed", __func__);
+ printk(KERN_ERR "usb-serial: %s - registering bus driver "
+ "failed\n", __func__);
goto exit_bus;
}
tty_set_operations(usb_serial_tty_driver, &serial_ops);
result = tty_register_driver(usb_serial_tty_driver);
if (result) {
- err("%s - tty_register_driver failed", __func__);
+ printk(KERN_ERR "usb-serial: %s - tty_register_driver failed\n",
+ __func__);
goto exit_reg_driver;
}
/* register the USB driver */
result = usb_register(&usb_serial_driver);
if (result < 0) {
- err("%s - usb_register failed", __func__);
+ printk(KERN_ERR "usb-serial: %s - usb_register failed\n",
+ __func__);
goto exit_tty;
}
/* register the generic driver, if we should */
result = usb_serial_generic_register(debug);
if (result < 0) {
- err("%s - registering generic driver failed", __func__);
+ printk(KERN_ERR "usb-serial: %s - registering generic "
+ "driver failed\n", __func__);
goto exit_generic;
}
bus_unregister(&usb_serial_bus_type);
exit_bus:
- err("%s - returning with error %d", __func__, result);
+ printk(KERN_ERR "usb-serial: %s - returning with error %d\n",
+ __func__, result);
put_tty_driver(usb_serial_tty_driver);
return result;
}
retval = usb_serial_bus_register(driver);
if (retval) {
- err("problem %d when registering driver %s",
- retval, driver->description);
+ printk(KERN_ERR "usb-serial: problem %d when registering "
+ "driver %s\n", retval, driver->description);
list_del(&driver->driver_list);
} else
printk(KERN_INFO "USB Serial support registered for %s\n",
dbg("%s", __func__);
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
- err("active config #%d != 1 ??",
+ dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
serial->dev->actconfig->desc.bConfigurationValue);
return -ENODEV;
}
if (request_ihex_firmware(&firmware_fw, "whiteheat.fw",
&serial->dev->dev)) {
- err("%s - request \"whiteheat.fw\" failed", __func__);
+ dev_err(&serial->dev->dev,
+ "%s - request \"whiteheat.fw\" failed\n", __func__);
goto out;
}
if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw",
&serial->dev->dev)) {
- err("%s - request \"whiteheat_loader.fw\" failed", __func__);
+ dev_err(&serial->dev->dev,
+ "%s - request \"whiteheat_loader.fw\" failed\n",
+ __func__);
goto out;
}
ret = 0;
(unsigned char *)record->data,
be16_to_cpu(record->len), 0xa0);
if (response < 0) {
- err("%s - ezusb_writememory failed for loader (%d %04X %p %d)",
- __func__, response, be32_to_cpu(record->addr),
- record->data, be16_to_cpu(record->len));
+ dev_err(&serial->dev->dev, "%s - ezusb_writememory "
+ "failed for loader (%d %04X %p %d)\n",
+ __func__, response, be32_to_cpu(record->addr),
+ record->data, be16_to_cpu(record->len));
break;
}
record = ihex_next_binrec(record);
(unsigned char *)record->data,
be16_to_cpu(record->len), 0xa3);
if (response < 0) {
- err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)",
- __func__, response, be32_to_cpu(record->addr),
- record->data, be16_to_cpu(record->len));
+ dev_err(&serial->dev->dev, "%s - ezusb_writememory "
+ "failed for first firmware step "
+ "(%d %04X %p %d)\n", __func__, response,
+ be32_to_cpu(record->addr), record->data,
+ be16_to_cpu(record->len));
break;
}
++record;
(unsigned char *)record->data,
be16_to_cpu(record->len), 0xa0);
if (response < 0) {
- err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)",
- __func__, response, be32_to_cpu(record->addr),
- record->data, be16_to_cpu(record->len));
+ dev_err(&serial->dev->dev, "%s - ezusb_writememory "
+ "failed for second firmware step "
+ "(%d %04X %p %d)\n", __func__, response,
+ be32_to_cpu(record->addr), record->data,
+ be16_to_cpu(record->len));
break;
}
++record;
ret = usb_bulk_msg(serial->dev, pipe, command, 2,
&alen, COMMAND_TIMEOUT_MS);
if (ret) {
- err("%s: Couldn't send command [%d]",
- serial->type->description, ret);
+ dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n",
+ serial->type->description, ret);
goto no_firmware;
} else if (alen != 2) {
- err("%s: Send command incomplete [%d]",
- serial->type->description, alen);
+ dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n",
+ serial->type->description, alen);
goto no_firmware;
}
ret = usb_bulk_msg(serial->dev, pipe, result,
sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
if (ret) {
- err("%s: Couldn't get results [%d]",
- serial->type->description, ret);
+ dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n",
+ serial->type->description, ret);
goto no_firmware;
} else if (alen != sizeof(*hw_info) + 1) {
- err("%s: Get results incomplete [%d]",
- serial->type->description, alen);
+ dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n",
+ serial->type->description, alen);
goto no_firmware;
} else if (result[0] != command[0]) {
- err("%s: Command failed [%d]",
- serial->type->description, result[0]);
+ dev_err(&serial->dev->dev, "%s: Command failed [%d]\n",
+ serial->type->description, result[0]);
goto no_firmware;
}
info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
if (info == NULL) {
- err("%s: Out of memory for port structures\n",
- serial->type->description);
+ dev_err(&port->dev,
+ "%s: Out of memory for port structures\n",
+ serial->type->description);
goto no_private;
}
for (j = 0; j < urb_pool_size; j++) {
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- err("No free urbs available");
+ dev_err(&port->dev, "No free urbs available\n");
goto no_rx_urb;
}
buf_size = port->read_urb->transfer_buffer_length;
urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("Couldn't allocate urb buffer");
+ dev_err(&port->dev,
+ "Couldn't allocate urb buffer\n");
goto no_rx_buf;
}
wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
if (!wrap) {
- err("Couldn't allocate urb wrapper");
+ dev_err(&port->dev,
+ "Couldn't allocate urb wrapper\n");
goto no_rx_wrap;
}
usb_fill_bulk_urb(urb, serial->dev,
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- err("No free urbs available");
+ dev_err(&port->dev, "No free urbs available\n");
goto no_tx_urb;
}
buf_size = port->write_urb->transfer_buffer_length;
urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("Couldn't allocate urb buffer");
+ dev_err(&port->dev,
+ "Couldn't allocate urb buffer\n");
goto no_tx_buf;
}
wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
if (!wrap) {
- err("Couldn't allocate urb wrapper");
+ dev_err(&port->dev,
+ "Couldn't allocate urb wrapper\n");
goto no_tx_wrap;
}
usb_fill_bulk_urb(urb, serial->dev,
command_info = kmalloc(sizeof(struct whiteheat_command_private),
GFP_KERNEL);
if (command_info == NULL) {
- err("%s: Out of memory for port structures\n",
- serial->type->description);
+ dev_err(&serial->dev->dev,
+ "%s: Out of memory for port structures\n",
+ serial->type->description);
goto no_command_private;
}
no_firmware:
/* Firmware likely not running */
- err("%s: Unable to retrieve firmware version, try replugging\n",
- serial->type->description);
- err("%s: If the firmware is not running (status led not blinking)\n",
- serial->type->description);
- err("%s: please contact support@connecttech.com\n",
- serial->type->description);
+ dev_err(&serial->dev->dev,
+ "%s: Unable to retrieve firmware version, try replugging\n",
+ serial->type->description);
+ dev_err(&serial->dev->dev,
+ "%s: If the firmware is not running (status led not blinking)\n",
+ serial->type->description);
+ dev_err(&serial->dev->dev,
+ "%s: please contact support@connecttech.com\n",
+ serial->type->description);
kfree(result);
return -ENODEV;
/* Start reading from the device */
retval = start_port_read(port);
if (retval) {
- err("%s - failed submitting read urb, error %d",
- __func__, retval);
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, retval);
firm_close(port);
stop_command_port(port->serial);
goto exit;
urb->transfer_buffer_length = bytes;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
sent = result;
spin_lock_irqsave(&info->lock, flags);
list_add(tmp, &info->tx_urbs_free);
wrap = urb_to_wrap(urb, &info->rx_urbs_submitted);
if (!wrap) {
spin_unlock(&info->lock);
- err("%s - Not my urb!", __func__);
+ dev_err(&port->dev, "%s - Not my urb!\n", __func__);
return;
}
list_del(&wrap->list);
wrap = urb_to_wrap(urb, &info->tx_urbs_submitted);
if (!wrap) {
spin_unlock(&info->lock);
- err("%s - Not my urb!", __func__);
+ dev_err(&port->dev, "%s - Not my urb!\n", __func__);
return;
}
list_move(&wrap->list, &info->tx_urbs_free);
command_port->read_urb->dev = serial->dev;
retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
if (retval) {
- err("%s - failed submitting read urb, error %d",
- __func__, retval);
+ dev_err(&serial->dev->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, retval);
goto exit;
}
}
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed resubmitting read urb, error %d",
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
__func__, result);
spin_lock_irqsave(&info->lock, flags);
list_add(tmp, &info->rx_urbs_free);
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff