#define RA 31
/* Some CP0 registers */
+#define C0_PWBASE 5, 5
#define C0_HWRENA 7, 0
#define C0_BADVADDR 8, 0
#define C0_BADINSTR 8, 1
#define C0_BADINSTRP 8, 2
#define C0_ENTRYHI 10, 0
+#define C0_GUESTCTL1 10, 4
#define C0_STATUS 12, 0
+#define C0_GUESTCTL0 12, 6
#define C0_CAUSE 13, 0
#define C0_EPC 14, 0
#define C0_EBASE 15, 1
unsigned int i;
struct uasm_label labels[2];
struct uasm_reloc relocs[2];
- struct uasm_label *l = labels;
- struct uasm_reloc *r = relocs;
+ struct uasm_label __maybe_unused *l = labels;
+ struct uasm_reloc __maybe_unused *r = relocs;
memset(labels, 0, sizeof(labels));
memset(relocs, 0, sizeof(relocs));
UASM_i_LW(&p, T0, offsetof(struct kvm_vcpu_arch, pc), K1);
UASM_i_MTC0(&p, T0, C0_EPC);
- /* Set the ASID for the Guest Kernel */
+#ifdef CONFIG_KVM_MIPS_VZ
+ /* Save normal linux process pgd (VZ guarantees pgd_reg is set) */
+ UASM_i_MFC0(&p, K0, c0_kscratch(), pgd_reg);
+ UASM_i_SW(&p, K0, offsetof(struct kvm_vcpu_arch, host_pgd), K1);
+
+ /*
+ * Set up KVM GPA pgd.
+ * This does roughly the same as TLBMISS_HANDLER_SETUP_PGD():
+ * - call tlbmiss_handler_setup_pgd(mm->pgd)
+ * - write mm->pgd into CP0_PWBase
+ *
+ * We keep S0 pointing at struct kvm so we can load the ASID below.
+ */
+ UASM_i_LW(&p, S0, (int)offsetof(struct kvm_vcpu, kvm) -
+ (int)offsetof(struct kvm_vcpu, arch), K1);
+ UASM_i_LW(&p, A0, offsetof(struct kvm, arch.gpa_mm.pgd), S0);
+ UASM_i_LA(&p, T9, (unsigned long)tlbmiss_handler_setup_pgd);
+ uasm_i_jalr(&p, RA, T9);
+ /* delay slot */
+ if (cpu_has_htw)
+ UASM_i_MTC0(&p, A0, C0_PWBASE);
+ else
+ uasm_i_nop(&p);
+
+ /* Set GM bit to setup eret to VZ guest context */
+ uasm_i_addiu(&p, V1, ZERO, 1);
+ uasm_i_mfc0(&p, K0, C0_GUESTCTL0);
+ uasm_i_ins(&p, K0, V1, MIPS_GCTL0_GM_SHIFT, 1);
+ uasm_i_mtc0(&p, K0, C0_GUESTCTL0);
+
+ if (cpu_has_guestid) {
+ /*
+ * Set root mode GuestID, so that root TLB refill handler can
+ * use the correct GuestID in the root TLB.
+ */
+
+ /* Get current GuestID */
+ uasm_i_mfc0(&p, T0, C0_GUESTCTL1);
+ /* Set GuestCtl1.RID = GuestCtl1.ID */
+ uasm_i_ext(&p, T1, T0, MIPS_GCTL1_ID_SHIFT,
+ MIPS_GCTL1_ID_WIDTH);
+ uasm_i_ins(&p, T0, T1, MIPS_GCTL1_RID_SHIFT,
+ MIPS_GCTL1_RID_WIDTH);
+ uasm_i_mtc0(&p, T0, C0_GUESTCTL1);
+
+ /* GuestID handles dealiasing so we don't need to touch ASID */
+ goto skip_asid_restore;
+ }
+
+ /* Root ASID Dealias (RAD) */
+
+ /* Save host ASID */
+ UASM_i_MFC0(&p, K0, C0_ENTRYHI);
+ UASM_i_SW(&p, K0, offsetof(struct kvm_vcpu_arch, host_entryhi),
+ K1);
+
+ /* Set the root ASID for the Guest */
+ UASM_i_ADDIU(&p, T1, S0,
+ offsetof(struct kvm, arch.gpa_mm.context.asid));
+#else
+ /* Set the ASID for the Guest Kernel or User */
UASM_i_LW(&p, T0, offsetof(struct kvm_vcpu_arch, cop0), K1);
UASM_i_LW(&p, T0, offsetof(struct mips_coproc, reg[MIPS_CP0_STATUS][0]),
T0);
UASM_i_ADDIU(&p, T1, K1, offsetof(struct kvm_vcpu_arch,
guest_user_mm.context.asid));
uasm_l_kernel_asid(&l, p);
+#endif
/* t1: contains the base of the ASID array, need to get the cpu id */
/* smp_processor_id */
uasm_i_andi(&p, K0, K0, MIPS_ENTRYHI_ASID);
#endif
+#ifndef CONFIG_KVM_MIPS_VZ
/*
* Set up KVM T&E GVA pgd.
* This does roughly the same as TLBMISS_HANDLER_SETUP_PGD():
UASM_i_LA(&p, T9, (unsigned long)tlbmiss_handler_setup_pgd);
uasm_i_jalr(&p, RA, T9);
uasm_i_mtc0(&p, K0, C0_ENTRYHI);
-
+#else
+ /* Set up KVM VZ root ASID (!guestid) */
+ uasm_i_mtc0(&p, K0, C0_ENTRYHI);
+skip_asid_restore:
+#endif
uasm_i_ehb(&p);
/* Disable RDHWR access */
/* Now that context has been saved, we can use other registers */
/* Restore vcpu */
- UASM_i_MFC0(&p, A1, scratch_vcpu[0], scratch_vcpu[1]);
- uasm_i_move(&p, S1, A1);
+ UASM_i_MFC0(&p, S1, scratch_vcpu[0], scratch_vcpu[1]);
/* Restore run (vcpu->run) */
- UASM_i_LW(&p, A0, offsetof(struct kvm_vcpu, run), A1);
- /* Save pointer to run in s0, will be saved by the compiler */
- uasm_i_move(&p, S0, A0);
+ UASM_i_LW(&p, S0, offsetof(struct kvm_vcpu, run), S1);
/*
* Save Host level EPC, BadVaddr and Cause to VCPU, useful to process
uasm_l_msa_1(&l, p);
}
+#ifdef CONFIG_KVM_MIPS_VZ
+ /* Restore host ASID */
+ if (!cpu_has_guestid) {
+ UASM_i_LW(&p, K0, offsetof(struct kvm_vcpu_arch, host_entryhi),
+ K1);
+ UASM_i_MTC0(&p, K0, C0_ENTRYHI);
+ }
+
+ /*
+ * Set up normal Linux process pgd.
+ * This does roughly the same as TLBMISS_HANDLER_SETUP_PGD():
+ * - call tlbmiss_handler_setup_pgd(mm->pgd)
+ * - write mm->pgd into CP0_PWBase
+ */
+ UASM_i_LW(&p, A0,
+ offsetof(struct kvm_vcpu_arch, host_pgd), K1);
+ UASM_i_LA(&p, T9, (unsigned long)tlbmiss_handler_setup_pgd);
+ uasm_i_jalr(&p, RA, T9);
+ /* delay slot */
+ if (cpu_has_htw)
+ UASM_i_MTC0(&p, A0, C0_PWBASE);
+ else
+ uasm_i_nop(&p);
+
+ /* Clear GM bit so we don't enter guest mode when EXL is cleared */
+ uasm_i_mfc0(&p, K0, C0_GUESTCTL0);
+ uasm_i_ins(&p, K0, ZERO, MIPS_GCTL0_GM_SHIFT, 1);
+ uasm_i_mtc0(&p, K0, C0_GUESTCTL0);
+
+ /* Save GuestCtl0 so we can access GExcCode after CPU migration */
+ uasm_i_sw(&p, K0,
+ offsetof(struct kvm_vcpu_arch, host_cp0_guestctl0), K1);
+
+ if (cpu_has_guestid) {
+ /*
+ * Clear root mode GuestID, so that root TLB operations use the
+ * root GuestID in the root TLB.
+ */
+ uasm_i_mfc0(&p, T0, C0_GUESTCTL1);
+ /* Set GuestCtl1.RID = MIPS_GCTL1_ROOT_GUESTID (i.e. 0) */
+ uasm_i_ins(&p, T0, ZERO, MIPS_GCTL1_RID_SHIFT,
+ MIPS_GCTL1_RID_WIDTH);
+ uasm_i_mtc0(&p, T0, C0_GUESTCTL1);
+ }
+#endif
+
/* Now that the new EBASE has been loaded, unset BEV and KSU_USER */
uasm_i_addiu(&p, AT, ZERO, ~(ST0_EXL | KSU_USER | ST0_IE));
uasm_i_and(&p, V0, V0, AT);
* Now jump to the kvm_mips_handle_exit() to see if we can deal
* with this in the kernel
*/
+ uasm_i_move(&p, A0, S0);
+ uasm_i_move(&p, A1, S1);
UASM_i_LA(&p, T9, (unsigned long)kvm_mips_handle_exit);
uasm_i_jalr(&p, RA, T9);
UASM_i_ADDIU(&p, SP, SP, -CALLFRAME_SIZ);