rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
command, 0xc0, 0, 1, data, 2);
- US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n",
- data[0], data[1]);
+ usb_stor_dbg(us, "Media status %02X %02X\n", data[0], data[1]);
return rc;
}
ready = 1;
}
- US_DEBUGP("alauda_init_media: We are ready for action!\n");
+ usb_stor_dbg(us, "We are ready for action!\n");
if (alauda_ack_media(us) != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
return USB_STOR_TRANSPORT_ERROR;
if (data[0] != 0x14) {
- US_DEBUGP("alauda_init_media: Media not ready after ack\n");
+ usb_stor_dbg(us, "Media not ready after ack\n");
return USB_STOR_TRANSPORT_ERROR;
}
if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n",
- data[0], data[1], data[2], data[3]);
+ usb_stor_dbg(us, "Media signature: %02X %02X %02X %02X\n",
+ data[0], data[1], data[2], data[3]);
media_info = alauda_card_find_id(data[1]);
if (media_info == NULL) {
printk(KERN_WARNING
}
MEDIA_INFO(us).capacity = 1 << media_info->chipshift;
- US_DEBUGP("Found media with capacity: %ldMB\n",
- MEDIA_INFO(us).capacity >> 20);
+ usb_stor_dbg(us, "Found media with capacity: %ldMB\n",
+ MEDIA_INFO(us).capacity >> 20);
MEDIA_INFO(us).pageshift = media_info->pageshift;
MEDIA_INFO(us).blockshift = media_info->blockshift;
/* Check for no media or door open */
if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10)
|| ((status[1] & 0x01) == 0)) {
- US_DEBUGP("alauda_check_media: No media, or door open\n");
+ usb_stor_dbg(us, "No media, or door open\n");
alauda_free_maps(&MEDIA_INFO(us));
info->sense_key = 0x02;
info->sense_asc = 0x3A;
/* Check for media change */
if (status[0] & 0x08) {
- US_DEBUGP("alauda_check_media: Media change detected\n");
+ usb_stor_dbg(us, "Media change detected\n");
alauda_free_maps(&MEDIA_INFO(us));
alauda_init_media(us);
if (rc != USB_STOR_XFER_GOOD)
return rc;
- US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data[0], data[1], data[2]);
+ usb_stor_dbg(us, "%02X %02X %02X\n", data[0], data[1], data[2]);
if (data[0] & ALAUDA_STATUS_ERROR)
return USB_STOR_XFER_ERROR;
goto error;
}
- US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone);
+ usb_stor_dbg(us, "Mapping blocks for zone %d\n", zone);
/* 1024 PBA's per zone */
for (i = 0; i < zonesize; i++)
if (data[j] != 0)
goto nonz;
pba_to_lba[i] = UNUSABLE;
- US_DEBUGP("alauda_read_map: PBA %d has no logical mapping\n", blocknum);
+ usb_stor_dbg(us, "PBA %d has no logical mapping\n", blocknum);
continue;
nonz:
nonff:
/* normal PBAs start with six FFs */
if (j < 6) {
- US_DEBUGP("alauda_read_map: PBA %d has no logical mapping: "
- "reserved area = %02X%02X%02X%02X "
- "data status %02X block status %02X\n",
- blocknum, data[0], data[1], data[2], data[3],
- data[4], data[5]);
+ usb_stor_dbg(us, "PBA %d has no logical mapping: reserved area = %02X%02X%02X%02X data status %02X block status %02X\n",
+ blocknum,
+ data[0], data[1], data[2], data[3],
+ data[4], data[5]);
pba_to_lba[i] = UNUSABLE;
continue;
}
if ((data[6] >> 4) != 0x01) {
- US_DEBUGP("alauda_read_map: PBA %d has invalid address "
- "field %02X%02X/%02X%02X\n",
- blocknum, data[6], data[7], data[11], data[12]);
+ usb_stor_dbg(us, "PBA %d has invalid address field %02X%02X/%02X%02X\n",
+ blocknum, data[6], data[7],
+ data[11], data[12]);
pba_to_lba[i] = UNUSABLE;
continue;
}
};
unsigned char buf[2];
- US_DEBUGP("alauda_erase_block: Erasing PBA %d\n", pba);
+ usb_stor_dbg(us, "Erasing PBA %d\n", pba);
rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
command, 9, NULL);
if (rc != USB_STOR_XFER_GOOD)
return rc;
- US_DEBUGP("alauda_erase_block: Erase result: %02X %02X\n",
- buf[0], buf[1]);
+ usb_stor_dbg(us, "Erase result: %02X %02X\n", buf[0], buf[1]);
return rc;
}
PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us)
};
- US_DEBUGP("alauda_read_block: pba %d page %d count %d\n",
- pba, page, pages);
+ usb_stor_dbg(us, "pba %d page %d count %d\n", pba, page, pages);
rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
command, 9, NULL);
PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us)
};
- US_DEBUGP("alauda_write_block: pba %d\n", pba);
+ usb_stor_dbg(us, "pba %d\n", pba);
rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
command, 9, NULL);
cptr = bptr + pagesize;
nand_compute_ecc(bptr, ecc);
if (!nand_compare_ecc(cptr+13, ecc)) {
- US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n",
- i, pba);
+ usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n",
+ i, pba);
nand_store_ecc(cptr+13, ecc);
}
nand_compute_ecc(bptr + (pagesize / 2), ecc);
if (!nand_compare_ecc(cptr+8, ecc)) {
- US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n",
- i, pba);
+ usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n",
+ i, pba);
nand_store_ecc(cptr+8, ecc);
}
cptr[6] = cptr[11] = MSB_of(lbap);
new_pba_offset = new_pba - (zone * zonesize);
MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba;
MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba;
- US_DEBUGP("alauda_write_lba: Remapped LBA %d to PBA %d\n",
- lba, new_pba);
+ usb_stor_dbg(us, "Remapped LBA %d to PBA %d\n", lba, new_pba);
if (pba != UNDEF) {
unsigned int pba_offset = pba - (zone * zonesize);
/* Not overflowing capacity? */
if (lba >= max_lba) {
- US_DEBUGP("Error: Requested lba %u exceeds "
- "maximum %u\n", lba, max_lba);
+ usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n",
+ lba, max_lba);
result = USB_STOR_TRANSPORT_ERROR;
break;
}
pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
if (pba == UNDEF) { /* this lba was never written */
- US_DEBUGP("Read %d zero pages (LBA %d) page %d\n",
- pages, lba, page);
+ usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n",
+ pages, lba, page);
/* This is not really an error. It just means
that the block has never been written.
memset(buffer, 0, len);
} else {
- US_DEBUGP("Read %d pages, from PBA %d"
- " (LBA %d) page %d\n",
- pages, pba, lba, page);
+ usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n",
+ pages, pba, lba, page);
result = alauda_read_block(us, pba, page, pages, buffer);
if (result != USB_STOR_TRANSPORT_GOOD)
/* Not overflowing capacity? */
if (lba >= max_lba) {
- US_DEBUGP("alauda_write_data: Requested lba %u exceeds "
- "maximum %u\n", lba, max_lba);
+ usb_stor_dbg(us, "Requested lba %u exceeds maximum %u\n",
+ lba, max_lba);
result = USB_STOR_TRANSPORT_ERROR;
break;
}
nand_init_ecc();
us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO);
- if (!us->extra) {
- US_DEBUGP("init_alauda: Gah! Can't allocate storage for"
- "alauda info struct!\n");
+ if (!us->extra)
return USB_STOR_TRANSPORT_ERROR;
- }
+
info = (struct alauda_info *) us->extra;
us->extra_destructor = alauda_info_destructor;
};
if (srb->cmnd[0] == INQUIRY) {
- US_DEBUGP("alauda_transport: INQUIRY. "
- "Returning bogus response.\n");
+ usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
memcpy(ptr, inquiry_response, sizeof(inquiry_response));
fill_inquiry_response(us, ptr, 36);
return USB_STOR_TRANSPORT_GOOD;
}
if (srb->cmnd[0] == TEST_UNIT_READY) {
- US_DEBUGP("alauda_transport: TEST_UNIT_READY.\n");
+ usb_stor_dbg(us, "TEST_UNIT_READY\n");
return alauda_check_media(us);
}
page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
- US_DEBUGP("alauda_transport: READ_10: page %d pagect %d\n",
- page, pages);
+ usb_stor_dbg(us, "READ_10: page %d pagect %d\n", page, pages);
return alauda_read_data(us, page, pages);
}
page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
- US_DEBUGP("alauda_transport: WRITE_10: page %d pagect %d\n",
- page, pages);
+ usb_stor_dbg(us, "WRITE_10: page %d pagect %d\n", page, pages);
return alauda_write_data(us, page, pages);
}
if (srb->cmnd[0] == REQUEST_SENSE) {
- US_DEBUGP("alauda_transport: REQUEST_SENSE.\n");
+ usb_stor_dbg(us, "REQUEST_SENSE\n");
memset(ptr, 0, 18);
ptr[0] = 0xF0;
return USB_STOR_TRANSPORT_GOOD;
}
- US_DEBUGP("alauda_transport: Gah! Unknown command: %d (0x%x)\n",
- srb->cmnd[0], srb->cmnd[0]);
+ usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+ srb->cmnd[0], srb->cmnd[0]);
info->sense_key = 0x05;
info->sense_asc = 0x20;
info->sense_ascq = 0x00;
if (srb->result == SAM_STAT_CHECK_CONDITION &&
memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB,
sizeof(usb_stor_sense_invalidCDB)) == 0) {
- US_DEBUGP("cypress atacb not supported ???\n");
+ usb_stor_dbg(us, "cypress atacb not supported ???\n");
goto end;
}
if (len == 0)
return USB_STOR_XFER_GOOD;
- US_DEBUGP("datafab_bulk_read: len = %d\n", len);
+ usb_stor_dbg(us, "len = %d\n", len);
return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
data, len, NULL);
}
if (len == 0)
return USB_STOR_XFER_GOOD;
- US_DEBUGP("datafab_bulk_write: len = %d\n", len);
+ usb_stor_dbg(us, "len = %d\n", len);
return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
data, len, NULL);
}
goto leave;
if (reply[0] != 0x50 && reply[1] != 0) {
- US_DEBUGP("datafab_write_data: Gah! "
- "write return code: %02x %02x\n",
- reply[0], reply[1]);
+ usb_stor_dbg(us, "Gah! write return code: %02x %02x\n",
+ reply[0], reply[1]);
result = USB_STOR_TRANSPORT_ERROR;
goto leave;
}
if (!buf)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("datafab_determine_lun: locating...\n");
+ usb_stor_dbg(us, "locating...\n");
// we'll try 3 times before giving up...
//
switch (pc) {
case 0x0:
- US_DEBUGP("datafab_handle_mode_sense: Current values\n");
+ usb_stor_dbg(us, "Current values\n");
break;
case 0x1:
- US_DEBUGP("datafab_handle_mode_sense: Changeable values\n");
+ usb_stor_dbg(us, "Changeable values\n");
break;
case 0x2:
- US_DEBUGP("datafab_handle_mode_sense: Default values\n");
+ usb_stor_dbg(us, "Default values\n");
break;
case 0x3:
- US_DEBUGP("datafab_handle_mode_sense: Saves values\n");
+ usb_stor_dbg(us, "Saves values\n");
break;
}
if (!us->extra) {
us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO);
- if (!us->extra) {
- US_DEBUGP("datafab_transport: Gah! "
- "Can't allocate storage for Datafab info struct!\n");
+ if (!us->extra)
return USB_STOR_TRANSPORT_ERROR;
- }
+
us->extra_destructor = datafab_info_destructor;
((struct datafab_info *)us->extra)->lun = -1;
}
info = (struct datafab_info *) (us->extra);
if (srb->cmnd[0] == INQUIRY) {
- US_DEBUGP("datafab_transport: INQUIRY. Returning bogus response");
+ usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
memcpy(ptr, inquiry_reply, sizeof(inquiry_reply));
fill_inquiry_response(us, ptr, 36);
return USB_STOR_TRANSPORT_GOOD;
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("datafab_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
- info->sectors, info->ssize);
+ usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
+ info->sectors, info->ssize);
// build the reply
// we need the last sector, not the number of sectors
}
if (srb->cmnd[0] == MODE_SELECT_10) {
- US_DEBUGP("datafab_transport: Gah! MODE_SELECT_10.\n");
+ usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
return USB_STOR_TRANSPORT_ERROR;
}
blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
- US_DEBUGP("datafab_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks);
+ usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n",
+ block, blocks);
return datafab_read_data(us, info, block, blocks);
}
blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
- US_DEBUGP("datafab_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks);
+ usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n",
+ block, blocks);
return datafab_read_data(us, info, block, blocks);
}
blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
- US_DEBUGP("datafab_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks);
+ usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n",
+ block, blocks);
return datafab_write_data(us, info, block, blocks);
}
blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
- US_DEBUGP("datafab_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks);
+ usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n",
+ block, blocks);
return datafab_write_data(us, info, block, blocks);
}
if (srb->cmnd[0] == TEST_UNIT_READY) {
- US_DEBUGP("datafab_transport: TEST_UNIT_READY.\n");
+ usb_stor_dbg(us, "TEST_UNIT_READY\n");
return datafab_id_device(us, info);
}
if (srb->cmnd[0] == REQUEST_SENSE) {
- US_DEBUGP("datafab_transport: REQUEST_SENSE. Returning faked response\n");
+ usb_stor_dbg(us, "REQUEST_SENSE - Returning faked response\n");
// this response is pretty bogus right now. eventually if necessary
// we can set the correct sense data. so far though it hasn't been
}
if (srb->cmnd[0] == MODE_SENSE) {
- US_DEBUGP("datafab_transport: MODE_SENSE_6 detected\n");
+ usb_stor_dbg(us, "MODE_SENSE_6 detected\n");
return datafab_handle_mode_sense(us, srb, 1);
}
if (srb->cmnd[0] == MODE_SENSE_10) {
- US_DEBUGP("datafab_transport: MODE_SENSE_10 detected\n");
+ usb_stor_dbg(us, "MODE_SENSE_10 detected\n");
return datafab_handle_mode_sense(us, srb, 0);
}
if (srb->cmnd[0] == START_STOP) {
/* this is used by sd.c'check_scsidisk_media_change to detect
media change */
- US_DEBUGP("datafab_transport: START_STOP.\n");
+ usb_stor_dbg(us, "START_STOP\n");
/* the first datafab_id_device after a media change returns
an error (determined experimentally) */
rc = datafab_id_device(us, info);
return rc;
}
- US_DEBUGP("datafab_transport: Gah! Unknown command: %d (0x%x)\n",
- srb->cmnd[0], srb->cmnd[0]);
+ usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+ srb->cmnd[0], srb->cmnd[0]);
info->sense_key = 0x05;
info->sense_asc = 0x20;
info->sense_ascq = 0x00;
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/device.h>
#include <linux/cdrom.h>
#include <linux/export.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
+#include "usb.h"
#include "debug.h"
#include "scsi.h"
-void usb_stor_show_command(struct scsi_cmnd *srb)
+void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb)
{
char *what = NULL;
int i;
case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
default: what = "(unknown command)"; break;
}
- US_DEBUGP("Command %s (%d bytes)\n", what, srb->cmd_len);
- US_DEBUGP("bytes: ");
+ usb_stor_dbg(us, "Command %s (%d bytes)\n", what, srb->cmd_len);
+ usb_stor_dbg(us, "bytes: ");
for (i = 0; i < srb->cmd_len && i < 16; i++)
US_DEBUGPX(" %02x", srb->cmnd[i]);
US_DEBUGPX("\n");
}
-void usb_stor_show_sense(
- unsigned char key,
- unsigned char asc,
- unsigned char ascq) {
-
+void usb_stor_show_sense(const struct us_data *us,
+ unsigned char key,
+ unsigned char asc,
+ unsigned char ascq)
+{
const char *what, *keystr;
keystr = scsi_sense_key_string(key);
if (what == NULL)
what = "(unknown ASC/ASCQ)";
- US_DEBUGP("%s: ", keystr);
+ usb_stor_dbg(us, "%s: ", keystr);
US_DEBUGPX(what, ascq);
US_DEBUGPX("\n");
}
-int usb_stor_dbg(const char *fmt, ...)
+int usb_stor_dbg(const struct us_data *us, const char *fmt, ...)
{
- struct va_format vaf;
va_list args;
int r;
va_start(args, fmt);
- vaf.fmt = fmt;
- vaf.va = &args;
-
- r = printk(KERN_DEBUG USB_STORAGE "%pV", &vaf);
+ r = dev_vprintk_emit(7, &us->pusb_dev->dev, fmt, args);
va_end(args);
#define USB_STORAGE "usb-storage: "
#ifdef CONFIG_USB_STORAGE_DEBUG
-void usb_stor_show_command(struct scsi_cmnd *srb);
-void usb_stor_show_sense( unsigned char key,
- unsigned char asc, unsigned char ascq );
-__printf(1, 2) int usb_stor_dbg(const char *fmt, ...);
+void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb);
+void usb_stor_show_sense(const struct us_data *us, unsigned char key,
+ unsigned char asc, unsigned char ascq);
+__printf(2, 3) int usb_stor_dbg(const struct us_data *us,
+ const char *fmt, ...);
-#define US_DEBUGP(fmt, ...) usb_stor_dbg(fmt, ##__VA_ARGS__)
#define US_DEBUGPX(fmt, ...) printk(fmt, ##__VA_ARGS__)
#define US_DEBUG(x) x
#else
-#define US_DEBUGP(fmt, ...) \
- do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
+__printf(2, 3)
+static inline int _usb_stor_dbg(const struct us_data *us,
+ const char *fmt, ...) {return 1;}
+#define usb_stor_dbg(us, fmt, ...) \
+ do { if (0) _usb_stor_dbg(us, fmt, ##__VA_ARGS__); } while (0)
#define US_DEBUGPX(fmt, ...) \
do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
#define US_DEBUG(x)
unsigned int cswlen = 0, partial = 0;
unsigned int transfer_length = bcb->DataTransferLength;
- /* US_DEBUGP("transport --- ene_send_scsi_cmd\n"); */
+ /* usb_stor_dbg(us, "transport --- ene_send_scsi_cmd\n"); */
/* send cmd to out endpoint */
result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
bcb, US_BULK_CB_WRAP_LEN, NULL);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("send cmd to out endpoint fail ---\n");
+ usb_stor_dbg(us, "send cmd to out endpoint fail ---\n");
return USB_STOR_TRANSPORT_ERROR;
}
transfer_length, 0, &partial);
}
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("data transfer fail ---\n");
+ usb_stor_dbg(us, "data transfer fail ---\n");
return USB_STOR_TRANSPORT_ERROR;
}
}
US_BULK_CS_WRAP_LEN, &cswlen);
if (result == USB_STOR_XFER_SHORT && cswlen == 0) {
- US_DEBUGP("Received 0-length CSW; retrying...\n");
+ usb_stor_dbg(us, "Received 0-length CSW; retrying...\n");
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
bcs, US_BULK_CS_WRAP_LEN, &cswlen);
}
if (result == USB_STOR_XFER_STALLED) {
/* get the status again */
- US_DEBUGP("Attempting to get CSW (2nd try)...\n");
+ usb_stor_dbg(us, "Attempting to get CSW (2nd try)...\n");
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
bcs, US_BULK_CS_WRAP_LEN, NULL);
}
struct scatterlist *sg = NULL;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
- US_DEBUGP("sd_scsi_read_capacity\n");
+ usb_stor_dbg(us, "sd_scsi_read_capacity\n");
if (info->SD_Status.HiCapacity) {
bl_len = 0x200;
if (info->SD_Status.IsMMC)
* (1 << (info->SD_C_SIZE_MULT + 2)) - 1;
}
info->bl_num = bl_num;
- US_DEBUGP("bl_len = %x\n", bl_len);
- US_DEBUGP("bl_num = %x\n", bl_num);
+ usb_stor_dbg(us, "bl_len = %x\n", bl_len);
+ usb_stor_dbg(us, "bl_num = %x\n", bl_num);
/*srb->request_bufflen = 8; */
buf[0] = (bl_num >> 24) & 0xff;
result = ene_load_bincode(us, SD_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Load SD RW pattern Fail !!\n");
+ usb_stor_dbg(us, "Load SD RW pattern Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
result = ene_load_bincode(us, SD_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Load SD RW pattern Fail !!\n");
+ usb_stor_dbg(us, "Load SD RW pattern Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
struct scatterlist *sg = NULL;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
- US_DEBUGP("ms_scsi_read_capacity\n");
+ usb_stor_dbg(us, "ms_scsi_read_capacity\n");
bl_len = 0x200;
if (info->MS_Status.IsMSPro)
bl_num = info->MSP_TotalBlock - 1;
bl_num = info->MS_Lib.NumberOfLogBlock * info->MS_Lib.blockSize * 2 - 1;
info->bl_num = bl_num;
- US_DEBUGP("bl_len = %x\n", bl_len);
- US_DEBUGP("bl_num = %x\n", bl_num);
+ usb_stor_dbg(us, "bl_len = %x\n", bl_len);
+ usb_stor_dbg(us, "bl_num = %x\n", bl_num);
/*srb->request_bufflen = 8; */
buf[0] = (bl_num >> 24) & 0xff;
if (info->MS_Status.IsMSPro) {
result = ene_load_bincode(us, MSP_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Load MPS RW pattern Fail !!\n");
+ usb_stor_dbg(us, "Load MPS RW pattern Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
u32 reg4b;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
- /*US_DEBUGP("transport --- ENE_ReadSDReg\n");*/
+ /*usb_stor_dbg(us, "transport --- ENE_ReadSDReg\n");*/
reg4b = *(u32 *)&buf[0x18];
info->SD_READ_BL_LEN = (u8)((reg4b >> 8) & 0x0f);
switch (flag) {
/* For SD */
case SD_INIT1_PATTERN:
- US_DEBUGP("SD_INIT1_PATTERN\n");
+ usb_stor_dbg(us, "SD_INIT1_PATTERN\n");
fw_name = SD_INIT1_FIRMWARE;
break;
case SD_INIT2_PATTERN:
- US_DEBUGP("SD_INIT2_PATTERN\n");
+ usb_stor_dbg(us, "SD_INIT2_PATTERN\n");
fw_name = SD_INIT2_FIRMWARE;
break;
case SD_RW_PATTERN:
- US_DEBUGP("SD_RW_PATTERN\n");
+ usb_stor_dbg(us, "SD_RW_PATTERN\n");
fw_name = SD_RW_FIRMWARE;
break;
/* For MS */
case MS_INIT_PATTERN:
- US_DEBUGP("MS_INIT_PATTERN\n");
+ usb_stor_dbg(us, "MS_INIT_PATTERN\n");
fw_name = MS_INIT_FIRMWARE;
break;
case MSP_RW_PATTERN:
- US_DEBUGP("MSP_RW_PATTERN\n");
+ usb_stor_dbg(us, "MSP_RW_PATTERN\n");
fw_name = MSP_RW_FIRMWARE;
break;
case MS_RW_PATTERN:
- US_DEBUGP("MS_RW_PATTERN\n");
+ usb_stor_dbg(us, "MS_RW_PATTERN\n");
fw_name = MS_RW_FIRMWARE;
break;
default:
- US_DEBUGP("----------- Unknown PATTERN ----------\n");
+ usb_stor_dbg(us, "----------- Unknown PATTERN ----------\n");
goto nofw;
}
err = request_firmware(&sd_fw, fw_name, &us->pusb_dev->dev);
if (err) {
- US_DEBUGP("load firmware %s failed\n", fw_name);
+ usb_stor_dbg(us, "load firmware %s failed\n", fw_name);
goto nofw;
}
buf = kmalloc(sd_fw->size, GFP_KERNEL);
- if (buf == NULL) {
- US_DEBUGP("Malloc memory for fireware failed!\n");
+ if (buf == NULL)
goto nofw;
- }
+
memcpy(buf, sd_fw->data, sd_fw->size);
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
} else {
ms_card_init(us); /* Card is MS (to ms.c)*/
}
- US_DEBUGP("MS Init Code OK !!\n");
+ usb_stor_dbg(us, "MS Init Code OK !!\n");
} else {
- US_DEBUGP("MS Card Not Ready --- %x\n", buf[0]);
+ usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
- US_DEBUGP("transport --- ENE_SDInit\n");
+ usb_stor_dbg(us, "transport --- ENE_SDInit\n");
/* SD Init Part-1 */
result = ene_load_bincode(us, SD_INIT1_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Load SD Init Code Part-1 Fail !!\n");
+ usb_stor_dbg(us, "Load SD Init Code Part-1 Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Execution SD Init Code Fail !!\n");
+ usb_stor_dbg(us, "Execution SD Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
/* SD Init Part-2 */
result = ene_load_bincode(us, SD_INIT2_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Load SD Init Code Part-2 Fail !!\n");
+ usb_stor_dbg(us, "Load SD Init Code Part-2 Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Execution SD Init Code Fail !!\n");
+ usb_stor_dbg(us, "Execution SD Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
info->SD_Status = *(struct SD_STATUS *)&buf[0];
if (info->SD_Status.Insert && info->SD_Status.Ready) {
+ struct SD_STATUS *s = &info->SD_Status;
+
ene_get_card_status(us, (unsigned char *)&buf);
- US_DEBUGP("Insert = %x\n", info->SD_Status.Insert);
- US_DEBUGP("Ready = %x\n", info->SD_Status.Ready);
- US_DEBUGP("IsMMC = %x\n", info->SD_Status.IsMMC);
- US_DEBUGP("HiCapacity = %x\n", info->SD_Status.HiCapacity);
- US_DEBUGP("HiSpeed = %x\n", info->SD_Status.HiSpeed);
- US_DEBUGP("WtP = %x\n", info->SD_Status.WtP);
+ usb_stor_dbg(us, "Insert = %x\n", s->Insert);
+ usb_stor_dbg(us, "Ready = %x\n", s->Ready);
+ usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC);
+ usb_stor_dbg(us, "HiCapacity = %x\n", s->HiCapacity);
+ usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed);
+ usb_stor_dbg(us, "WtP = %x\n", s->WtP);
} else {
- US_DEBUGP("SD Card Not Ready --- %x\n", buf[0]);
+ usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
return USB_STOR_TRANSPORT_GOOD;
int result = 0;
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
- /*US_DEBUG(usb_stor_show_command(srb)); */
+ /*US_DEBUG(usb_stor_show_command(us, srb)); */
scsi_set_resid(srb, 0);
if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready))) {
result = ene_init(us);
mutex_lock(&us->dev_mutex);
- US_DEBUGP("%s\n", __func__);
if (us->suspend_resume_hook)
(us->suspend_resume_hook)(us, US_RESUME);
u8 tmp = 0;
struct us_data *us = usb_get_intfdata(iface);
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
- US_DEBUGP("%s\n", __func__);
+
/* Report the reset to the SCSI core */
usb_stor_reset_resume(iface);
MODULE_LICENSE("GPL");
#ifdef CONFIG_USB_STORAGE_DEBUG
-static void pdump (void *, int);
+static void pdump(struct us_data *us, void *ibuffer, int length);
#endif
/* Bits of HD_STATUS */
fxfr->Count = cpu_to_le32 (count);
memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
- US_DEBUGP("Read data Freecom! (c=%d)\n", count);
+ usb_stor_dbg(us, "Read data Freecom! (c=%d)\n", count);
/* Issue the transfer command. */
result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
FCM_PACKET_LENGTH, NULL);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP ("Freecom readdata transport error\n");
+ usb_stor_dbg(us, "Freecom readdata transport error\n");
return USB_STOR_TRANSPORT_ERROR;
}
/* Now transfer all of our blocks. */
- US_DEBUGP("Start of read\n");
+ usb_stor_dbg(us, "Start of read\n");
result = usb_stor_bulk_srb(us, ipipe, srb);
- US_DEBUGP("freecom_readdata done!\n");
+ usb_stor_dbg(us, "freecom_readdata done!\n");
if (result > USB_STOR_XFER_SHORT)
return USB_STOR_TRANSPORT_ERROR;
fxfr->Count = cpu_to_le32 (count);
memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
- US_DEBUGP("Write data Freecom! (c=%d)\n", count);
+ usb_stor_dbg(us, "Write data Freecom! (c=%d)\n", count);
/* Issue the transfer command. */
result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
FCM_PACKET_LENGTH, NULL);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP ("Freecom writedata transport error\n");
+ usb_stor_dbg(us, "Freecom writedata transport error\n");
return USB_STOR_TRANSPORT_ERROR;
}
/* Now transfer all of our blocks. */
- US_DEBUGP("Start of write\n");
+ usb_stor_dbg(us, "Start of write\n");
result = usb_stor_bulk_srb(us, opipe, srb);
- US_DEBUGP("freecom_writedata done!\n");
+ usb_stor_dbg(us, "freecom_writedata done!\n");
if (result > USB_STOR_XFER_SHORT)
return USB_STOR_TRANSPORT_ERROR;
return USB_STOR_TRANSPORT_GOOD;
fcb = (struct freecom_cb_wrap *) us->iobuf;
fst = (struct freecom_status *) us->iobuf;
- US_DEBUGP("Freecom TRANSPORT STARTED\n");
+ usb_stor_dbg(us, "Freecom TRANSPORT STARTED\n");
/* Get handles for both transports. */
opipe = us->send_bulk_pipe;
memcpy (fcb->Atapi, srb->cmnd, 12);
memset (fcb->Filler, 0, sizeof (fcb->Filler));
- US_DEBUG(pdump (srb->cmnd, 12));
+ US_DEBUG(pdump(us, srb->cmnd, 12));
/* Send it out. */
result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
* USB land. It returns the status in its own registers, which
* come back in the bulk pipe. */
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP ("freecom transport error\n");
+ usb_stor_dbg(us, "freecom transport error\n");
return USB_STOR_TRANSPORT_ERROR;
}
* doesn't hurt us to always do it now. */
result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
FCM_STATUS_PACKET_LENGTH, &partial);
- US_DEBUGP("foo Status result %d %u\n", result, partial);
+ usb_stor_dbg(us, "foo Status result %d %u\n", result, partial);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUG(pdump ((void *) fst, partial));
+ US_DEBUG(pdump(us, (void *)fst, partial));
/* The firmware will time-out commands after 20 seconds. Some commands
* can legitimately take longer than this, so we use a different
* may not work, but that is a condition that should never happen.
*/
while (fst->Status & FCM_STATUS_BUSY) {
- US_DEBUGP("20 second USB/ATAPI bridge TIMEOUT occurred!\n");
- US_DEBUGP("fst->Status is %x\n", fst->Status);
+ usb_stor_dbg(us, "20 second USB/ATAPI bridge TIMEOUT occurred!\n");
+ usb_stor_dbg(us, "fst->Status is %x\n", fst->Status);
/* Get the status again */
fcb->Type = FCM_PACKET_STATUS;
* registers, which come back in the bulk pipe.
*/
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP ("freecom transport error\n");
+ usb_stor_dbg(us, "freecom transport error\n");
return USB_STOR_TRANSPORT_ERROR;
}
result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
FCM_STATUS_PACKET_LENGTH, &partial);
- US_DEBUGP("bar Status result %d %u\n", result, partial);
+ usb_stor_dbg(us, "bar Status result %d %u\n", result, partial);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUG(pdump ((void *) fst, partial));
+ US_DEBUG(pdump(us, (void *)fst, partial));
}
if (partial != 4)
return USB_STOR_TRANSPORT_ERROR;
if ((fst->Status & 1) != 0) {
- US_DEBUGP("operation failed\n");
+ usb_stor_dbg(us, "operation failed\n");
return USB_STOR_TRANSPORT_FAILED;
}
/* The device might not have as much data available as we
* requested. If you ask for more than the device has, this reads
* and such will hang. */
- US_DEBUGP("Device indicates that it has %d bytes available\n",
- le16_to_cpu (fst->Count));
- US_DEBUGP("SCSI requested %d\n", scsi_bufflen(srb));
+ usb_stor_dbg(us, "Device indicates that it has %d bytes available\n",
+ le16_to_cpu(fst->Count));
+ usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb));
/* Find the length we desire to read. */
switch (srb->cmnd[0]) {
/* verify that this amount is legal */
if (length > scsi_bufflen(srb)) {
length = scsi_bufflen(srb);
- US_DEBUGP("Truncating request to match buffer length: %d\n", length);
+ usb_stor_dbg(us, "Truncating request to match buffer length: %d\n",
+ length);
}
/* What we do now depends on what direction the data is supposed to
/* Make sure that the status indicates that the device
* wants data as well. */
if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) {
- US_DEBUGP("SCSI wants data, drive doesn't have any\n");
+ usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n");
return USB_STOR_TRANSPORT_FAILED;
}
result = freecom_readdata (srb, us, ipipe, opipe, length);
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
- US_DEBUGP("FCM: Waiting for status\n");
+ usb_stor_dbg(us, "Waiting for status\n");
result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
FCM_PACKET_LENGTH, &partial);
- US_DEBUG(pdump ((void *) fst, partial));
+ US_DEBUG(pdump(us, (void *)fst, partial));
if (partial != 4 || result > USB_STOR_XFER_SHORT)
return USB_STOR_TRANSPORT_ERROR;
if ((fst->Status & ERR_STAT) != 0) {
- US_DEBUGP("operation failed\n");
+ usb_stor_dbg(us, "operation failed\n");
return USB_STOR_TRANSPORT_FAILED;
}
if ((fst->Reason & 3) != 3) {
- US_DEBUGP("Drive seems still hungry\n");
+ usb_stor_dbg(us, "Drive seems still hungry\n");
return USB_STOR_TRANSPORT_FAILED;
}
- US_DEBUGP("Transfer happy\n");
+ usb_stor_dbg(us, "Transfer happy\n");
break;
case DMA_TO_DEVICE:
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
- US_DEBUGP("FCM: Waiting for status\n");
+ usb_stor_dbg(us, "Waiting for status\n");
result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
FCM_PACKET_LENGTH, &partial);
if (partial != 4 || result > USB_STOR_XFER_SHORT)
return USB_STOR_TRANSPORT_ERROR;
if ((fst->Status & ERR_STAT) != 0) {
- US_DEBUGP("operation failed\n");
+ usb_stor_dbg(us, "operation failed\n");
return USB_STOR_TRANSPORT_FAILED;
}
if ((fst->Reason & 3) != 3) {
- US_DEBUGP("Drive seems still hungry\n");
+ usb_stor_dbg(us, "Drive seems still hungry\n");
return USB_STOR_TRANSPORT_FAILED;
}
- US_DEBUGP("Transfer happy\n");
+ usb_stor_dbg(us, "Transfer happy\n");
break;
default:
/* should never hit here -- filtered in usb.c */
- US_DEBUGP ("freecom unimplemented direction: %d\n",
- us->srb->sc_data_direction);
+ usb_stor_dbg(us, "freecom unimplemented direction: %d\n",
+ us->srb->sc_data_direction);
/* Return fail, SCSI seems to handle this better. */
return USB_STOR_TRANSPORT_FAILED;
break;
result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
0x4c, 0xc0, 0x4346, 0x0, buffer, 0x20, 3*HZ);
buffer[32] = '\0';
- US_DEBUGP("String returned from FC init is: %s\n", buffer);
+ usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer);
/* Special thanks to the people at Freecom for providing me with
* this "magic sequence", which they use in their Windows and MacOS
/* send reset */
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ);
- US_DEBUGP("result from activate reset is %d\n", result);
+ usb_stor_dbg(us, "result from activate reset is %d\n", result);
/* wait 250ms */
mdelay(250);
/* clear reset */
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ);
- US_DEBUGP("result from clear reset is %d\n", result);
+ usb_stor_dbg(us, "result from clear reset is %d\n", result);
/* wait 3 seconds */
mdelay(3 * 1000);
}
#ifdef CONFIG_USB_STORAGE_DEBUG
-static void pdump (void *ibuffer, int length)
+static void pdump(struct us_data *us, void *ibuffer, int length)
{
static char line[80];
int offset = 0;
line[offset++] = '.';
}
line[offset] = 0;
- US_DEBUGP("%s\n", line);
+ usb_stor_dbg(us, "%s\n", line);
offset = 0;
}
offset += sprintf (line+offset, "%08x:", i);
line[offset++] = '.';
}
line[offset] = 0;
- US_DEBUGP("%s\n", line);
+ usb_stor_dbg(us, "%s\n", line);
offset = 0;
}
#endif
{
int result;
- US_DEBUGP("Attempting to init eUSCSI bridge...\n");
+ usb_stor_dbg(us, "Attempting to init eUSCSI bridge...\n");
us->iobuf[0] = 0x1;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
0x01, 0x0, us->iobuf, 0x1, 5000);
- US_DEBUGP("-- result is %d\n", result);
+ usb_stor_dbg(us, "-- result is %d\n", result);
return 0;
}
unsigned int partial;
static char init_string[] = "\xec\x0a\x06\x00$PCCHIPS";
- US_DEBUGP("Sending UCR-61S2B initialization packet...\n");
+ usb_stor_dbg(us, "Sending UCR-61S2B initialization packet...\n");
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->Tag = 0;
if (res)
return -EIO;
- US_DEBUGP("Getting status packet...\n");
+ usb_stor_dbg(us, "Getting status packet...\n");
res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
US_BULK_CS_WRAP_LEN, &partial);
if (res)
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE,
0x01, 0x0, NULL, 0x0, 1000);
- US_DEBUGP("Huawei mode set result is %d\n", result);
+ usb_stor_dbg(us, "Huawei mode set result is %d\n", result);
return 0;
}
switch ( action ) {
case ACTION_READ_STATUS:
- US_DEBUGP(" isd200_action(READ_STATUS)\n");
+ usb_stor_dbg(us, " isd200_action(READ_STATUS)\n");
ata.generic.ActionSelect = ACTION_SELECT_0|ACTION_SELECT_2;
ata.generic.RegisterSelect =
REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
break;
case ACTION_ENUM:
- US_DEBUGP(" isd200_action(ENUM,0x%02x)\n",value);
+ usb_stor_dbg(us, " isd200_action(ENUM,0x%02x)\n", value);
ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
ACTION_SELECT_3|ACTION_SELECT_4|
ACTION_SELECT_5;
break;
case ACTION_RESET:
- US_DEBUGP(" isd200_action(RESET)\n");
+ usb_stor_dbg(us, " isd200_action(RESET)\n");
ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
ACTION_SELECT_3|ACTION_SELECT_4;
ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
break;
case ACTION_REENABLE:
- US_DEBUGP(" isd200_action(REENABLE)\n");
+ usb_stor_dbg(us, " isd200_action(REENABLE)\n");
ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
ACTION_SELECT_3|ACTION_SELECT_4;
ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
break;
case ACTION_SOFT_RESET:
- US_DEBUGP(" isd200_action(SOFT_RESET)\n");
+ usb_stor_dbg(us, " isd200_action(SOFT_RESET)\n");
ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_5;
ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND;
ata.write.DeviceHeadByte = info->DeviceHead;
break;
case ACTION_IDENTIFY:
- US_DEBUGP(" isd200_action(IDENTIFY)\n");
+ usb_stor_dbg(us, " isd200_action(IDENTIFY)\n");
ata.generic.RegisterSelect = REG_COMMAND;
ata.write.CommandByte = ATA_CMD_ID_ATA;
isd200_set_srb(info, DMA_FROM_DEVICE, info->id,
break;
default:
- US_DEBUGP("Error: Undefined action %d\n",action);
+ usb_stor_dbg(us, "Error: Undefined action %d\n", action);
return ISD200_ERROR;
}
if (status == USB_STOR_TRANSPORT_GOOD)
status = ISD200_GOOD;
else {
- US_DEBUGP(" isd200_action(0x%02x) error: %d\n",action,status);
+ usb_stor_dbg(us, " isd200_action(0x%02x) error: %d\n",
+ action, status);
status = ISD200_ERROR;
/* need to reset device here */
}
int retStatus = ISD200_GOOD;
int transferStatus;
- US_DEBUGP("Entering isd200_IssueATAReadRegs\n");
+ usb_stor_dbg(us, "Entering isd200_IssueATAReadRegs\n");
transferStatus = isd200_action( us, ACTION_READ_STATUS,
info->RegsBuf, sizeof(info->ATARegs) );
if (transferStatus != ISD200_TRANSPORT_GOOD) {
- US_DEBUGP(" Error reading ATA registers\n");
+ usb_stor_dbg(us, " Error reading ATA registers\n");
retStatus = ISD200_ERROR;
} else {
memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs));
- US_DEBUGP(" Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n",
- info->ATARegs[ATA_REG_ERROR_OFFSET]);
+ usb_stor_dbg(us, " Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n",
+ info->ATARegs[ATA_REG_ERROR_OFFSET]);
}
return retStatus;
* short-circuit all other processing
*/
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
- US_DEBUGP("-- command was aborted\n");
+ usb_stor_dbg(us, "-- command was aborted\n");
goto Handle_Abort;
}
break;
case USB_STOR_TRANSPORT_NO_SENSE:
- US_DEBUGP("-- transport indicates protocol failure\n");
+ usb_stor_dbg(us, "-- transport indicates protocol failure\n");
srb->result = SAM_STAT_CHECK_CONDITION;
return;
case USB_STOR_TRANSPORT_FAILED:
- US_DEBUGP("-- transport indicates command failure\n");
+ usb_stor_dbg(us, "-- transport indicates command failure\n");
need_auto_sense = 1;
break;
case USB_STOR_TRANSPORT_ERROR:
- US_DEBUGP("-- transport indicates transport error\n");
+ usb_stor_dbg(us, "-- transport indicates transport error\n");
srb->result = DID_ERROR << 16;
/* Need reset here */
return;
default:
- US_DEBUGP("-- transport indicates unknown error\n");
+ usb_stor_dbg(us, "-- transport indicates unknown error\n");
srb->result = DID_ERROR << 16;
/* Need reset here */
return;
(srb->cmnd[0] == MODE_SENSE) ||
(srb->cmnd[0] == LOG_SENSE) ||
(srb->cmnd[0] == MODE_SENSE_10))) {
- US_DEBUGP("-- unexpectedly short transfer\n");
+ usb_stor_dbg(us, "-- unexpectedly short transfer\n");
need_auto_sense = 1;
}
if (need_auto_sense) {
result = isd200_read_regs(us);
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
- US_DEBUGP("-- auto-sense aborted\n");
+ usb_stor_dbg(us, "-- auto-sense aborted\n");
goto Handle_Abort;
}
if (result == ISD200_GOOD) {
}
#ifdef CONFIG_USB_STORAGE_DEBUG
-static void isd200_log_config( struct isd200_info* info )
+static void isd200_log_config(struct us_data *us, struct isd200_info *info)
{
- US_DEBUGP(" Event Notification: 0x%x\n",
- info->ConfigData.EventNotification);
- US_DEBUGP(" External Clock: 0x%x\n",
- info->ConfigData.ExternalClock);
- US_DEBUGP(" ATA Init Timeout: 0x%x\n",
- info->ConfigData.ATAInitTimeout);
- US_DEBUGP(" ATAPI Command Block Size: 0x%x\n",
- (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6);
- US_DEBUGP(" Master/Slave Selection: 0x%x\n",
- info->ConfigData.ATAConfig & ATACFG_MASTER);
- US_DEBUGP(" ATAPI Reset: 0x%x\n",
- info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET);
- US_DEBUGP(" ATA Timing: 0x%x\n",
- info->ConfigData.ATAConfig & ATACFG_TIMING);
- US_DEBUGP(" ATA Major Command: 0x%x\n",
- info->ConfigData.ATAMajorCommand);
- US_DEBUGP(" ATA Minor Command: 0x%x\n",
- info->ConfigData.ATAMinorCommand);
- US_DEBUGP(" Init Status: 0x%x\n",
- info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS);
- US_DEBUGP(" Config Descriptor 2: 0x%x\n",
- info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2);
- US_DEBUGP(" Skip Device Boot: 0x%x\n",
- info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT);
- US_DEBUGP(" ATA 3 State Supsend: 0x%x\n",
- info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND);
- US_DEBUGP(" Descriptor Override: 0x%x\n",
- info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE);
- US_DEBUGP(" Last LUN Identifier: 0x%x\n",
- info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN);
- US_DEBUGP(" SRST Enable: 0x%x\n",
- info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST);
+ usb_stor_dbg(us, " Event Notification: 0x%x\n",
+ info->ConfigData.EventNotification);
+ usb_stor_dbg(us, " External Clock: 0x%x\n",
+ info->ConfigData.ExternalClock);
+ usb_stor_dbg(us, " ATA Init Timeout: 0x%x\n",
+ info->ConfigData.ATAInitTimeout);
+ usb_stor_dbg(us, " ATAPI Command Block Size: 0x%x\n",
+ (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6);
+ usb_stor_dbg(us, " Master/Slave Selection: 0x%x\n",
+ info->ConfigData.ATAConfig & ATACFG_MASTER);
+ usb_stor_dbg(us, " ATAPI Reset: 0x%x\n",
+ info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET);
+ usb_stor_dbg(us, " ATA Timing: 0x%x\n",
+ info->ConfigData.ATAConfig & ATACFG_TIMING);
+ usb_stor_dbg(us, " ATA Major Command: 0x%x\n",
+ info->ConfigData.ATAMajorCommand);
+ usb_stor_dbg(us, " ATA Minor Command: 0x%x\n",
+ info->ConfigData.ATAMinorCommand);
+ usb_stor_dbg(us, " Init Status: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS);
+ usb_stor_dbg(us, " Config Descriptor 2: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2);
+ usb_stor_dbg(us, " Skip Device Boot: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT);
+ usb_stor_dbg(us, " ATA 3 State Supsend: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND);
+ usb_stor_dbg(us, " Descriptor Override: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE);
+ usb_stor_dbg(us, " Last LUN Identifier: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN);
+ usb_stor_dbg(us, " SRST Enable: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST);
}
#endif
int result;
#ifdef CONFIG_USB_STORAGE_DEBUG
- US_DEBUGP("Entering isd200_write_config\n");
- US_DEBUGP(" Writing the following ISD200 Config Data:\n");
- isd200_log_config(info);
+ usb_stor_dbg(us, "Entering isd200_write_config\n");
+ usb_stor_dbg(us, " Writing the following ISD200 Config Data:\n");
+ isd200_log_config(us, info);
#endif
/* let's send the command via the control pipe */
sizeof(info->ConfigData));
if (result >= 0) {
- US_DEBUGP(" ISD200 Config Data was written successfully\n");
+ usb_stor_dbg(us, " ISD200 Config Data was written successfully\n");
} else {
- US_DEBUGP(" Request to write ISD200 Config Data failed!\n");
+ usb_stor_dbg(us, " Request to write ISD200 Config Data failed!\n");
retStatus = ISD200_ERROR;
}
- US_DEBUGP("Leaving isd200_write_config %08X\n", retStatus);
+ usb_stor_dbg(us, "Leaving isd200_write_config %08X\n", retStatus);
return retStatus;
}
int retStatus = ISD200_GOOD;
int result;
- US_DEBUGP("Entering isd200_read_config\n");
+ usb_stor_dbg(us, "Entering isd200_read_config\n");
/* read the configuration information from ISD200. Use this to */
/* determine what the special ATA CDB bytes are. */
if (result >= 0) {
- US_DEBUGP(" Retrieved the following ISD200 Config Data:\n");
+ usb_stor_dbg(us, " Retrieved the following ISD200 Config Data:\n");
#ifdef CONFIG_USB_STORAGE_DEBUG
- isd200_log_config(info);
+ isd200_log_config(us, info);
#endif
} else {
- US_DEBUGP(" Request to get ISD200 Config Data failed!\n");
+ usb_stor_dbg(us, " Request to get ISD200 Config Data failed!\n");
retStatus = ISD200_ERROR;
}
- US_DEBUGP("Leaving isd200_read_config %08X\n", retStatus);
+ usb_stor_dbg(us, "Leaving isd200_read_config %08X\n", retStatus);
return retStatus;
}
int retStatus = ISD200_GOOD;
int transferStatus;
- US_DEBUGP("Entering isd200_atapi_soft_reset\n");
+ usb_stor_dbg(us, "Entering isd200_atapi_soft_reset\n");
transferStatus = isd200_action( us, ACTION_SOFT_RESET, NULL, 0 );
if (transferStatus != ISD200_TRANSPORT_GOOD) {
- US_DEBUGP(" Error issuing Atapi Soft Reset\n");
+ usb_stor_dbg(us, " Error issuing Atapi Soft Reset\n");
retStatus = ISD200_ERROR;
}
- US_DEBUGP("Leaving isd200_atapi_soft_reset %08X\n", retStatus);
+ usb_stor_dbg(us, "Leaving isd200_atapi_soft_reset %08X\n", retStatus);
return retStatus;
}
int retStatus = ISD200_GOOD;
int transferStatus;
- US_DEBUGP("Entering isd200_SRST\n");
+ usb_stor_dbg(us, "Entering isd200_SRST\n");
transferStatus = isd200_action( us, ACTION_RESET, NULL, 0 );
/* check to see if this request failed */
if (transferStatus != ISD200_TRANSPORT_GOOD) {
- US_DEBUGP(" Error issuing SRST\n");
+ usb_stor_dbg(us, " Error issuing SRST\n");
retStatus = ISD200_ERROR;
} else {
/* delay 10ms to give the drive a chance to see it */
transferStatus = isd200_action( us, ACTION_REENABLE, NULL, 0 );
if (transferStatus != ISD200_TRANSPORT_GOOD) {
- US_DEBUGP(" Error taking drive out of reset\n");
+ usb_stor_dbg(us, " Error taking drive out of reset\n");
retStatus = ISD200_ERROR;
} else {
/* delay 50ms to give the drive a chance to recover after SRST */
}
}
- US_DEBUGP("Leaving isd200_srst %08X\n", retStatus);
+ usb_stor_dbg(us, "Leaving isd200_srst %08X\n", retStatus);
return retStatus;
}
if (!detect) {
if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) {
- US_DEBUGP(" %s status is still BSY, try again...\n",
- master_slave == ATA_ADDRESS_DEVHEAD_STD ?
- "Master" : "Slave");
+ usb_stor_dbg(us, " %s status is still BSY, try again...\n",
+ master_slave == ATA_ADDRESS_DEVHEAD_STD ?
+ "Master" : "Slave");
} else {
- US_DEBUGP(" %s status !BSY, continue with next operation\n",
- master_slave == ATA_ADDRESS_DEVHEAD_STD ?
- "Master" : "Slave");
+ usb_stor_dbg(us, " %s status !BSY, continue with next operation\n",
+ master_slave == ATA_ADDRESS_DEVHEAD_STD ?
+ "Master" : "Slave");
break;
}
}
/* ATA_ERR (workaround for Archos CD-ROM) */
else if (regs[ATA_REG_STATUS_OFFSET] &
(ATA_BUSY | ATA_DF | ATA_ERR)) {
- US_DEBUGP(" Status indicates it is not ready, try again...\n");
+ usb_stor_dbg(us, " Status indicates it is not ready, try again...\n");
}
/* check for DRDY, ATA devices set DRDY after SRST */
else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) {
- US_DEBUGP(" Identified ATA device\n");
+ usb_stor_dbg(us, " Identified ATA device\n");
info->DeviceFlags |= DF_ATA_DEVICE;
info->DeviceHead = master_slave;
break;
*/
if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) &&
!recheckAsMaster) {
- US_DEBUGP(" Identified ATAPI device as slave. Rechecking again as master\n");
+ usb_stor_dbg(us, " Identified ATAPI device as slave. Rechecking again as master\n");
recheckAsMaster = 1;
master_slave = ATA_ADDRESS_DEVHEAD_STD;
} else {
- US_DEBUGP(" Identified ATAPI device\n");
+ usb_stor_dbg(us, " Identified ATAPI device\n");
info->DeviceHead = master_slave;
status = isd200_atapi_soft_reset(us);
break;
}
} else {
- US_DEBUGP(" Not ATA, not ATAPI. Weird.\n");
+ usb_stor_dbg(us, " Not ATA, not ATAPI - Weird\n");
break;
}
/* check for timeout on this request */
if (time_after_eq(jiffies, endTime)) {
if (!detect)
- US_DEBUGP(" BSY check timeout, just continue with next operation...\n");
+ usb_stor_dbg(us, " BSY check timeout, just continue with next operation...\n");
else
- US_DEBUGP(" Device detect timeout!\n");
+ usb_stor_dbg(us, " Device detect timeout!\n");
break;
}
}
struct isd200_info *info = (struct isd200_info *)us->extra;
int retStatus = ISD200_GOOD;
- US_DEBUGP("Entering isd200_manual_enum\n");
+ usb_stor_dbg(us, "Entering isd200_manual_enum\n");
retStatus = isd200_read_config(us);
if (retStatus == ISD200_GOOD) {
isslave = (info->DeviceHead & ATA_ADDRESS_DEVHEAD_SLAVE) ? 1 : 0;
if (!(info->ConfigData.ATAConfig & ATACFG_MASTER)) {
- US_DEBUGP(" Setting Master/Slave selection to %d\n", isslave);
+ usb_stor_dbg(us, " Setting Master/Slave selection to %d\n",
+ isslave);
info->ConfigData.ATAConfig &= 0x3f;
info->ConfigData.ATAConfig |= (isslave<<6);
retStatus = isd200_write_config(us);
}
}
- US_DEBUGP("Leaving isd200_manual_enum %08X\n", retStatus);
+ usb_stor_dbg(us, "Leaving isd200_manual_enum %08X\n", retStatus);
return(retStatus);
}
#endif
}
-static void isd200_dump_driveid(u16 *id)
+static void isd200_dump_driveid(struct us_data *us, u16 *id)
{
- US_DEBUGP(" Identify Data Structure:\n");
- US_DEBUGP(" config = 0x%x\n", id[ATA_ID_CONFIG]);
- US_DEBUGP(" cyls = 0x%x\n", id[ATA_ID_CYLS]);
- US_DEBUGP(" heads = 0x%x\n", id[ATA_ID_HEADS]);
- US_DEBUGP(" track_bytes = 0x%x\n", id[4]);
- US_DEBUGP(" sector_bytes = 0x%x\n", id[5]);
- US_DEBUGP(" sectors = 0x%x\n", id[ATA_ID_SECTORS]);
- US_DEBUGP(" serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]);
- US_DEBUGP(" buf_type = 0x%x\n", id[20]);
- US_DEBUGP(" buf_size = 0x%x\n", id[ATA_ID_BUF_SIZE]);
- US_DEBUGP(" ecc_bytes = 0x%x\n", id[22]);
- US_DEBUGP(" fw_rev[0] = 0x%x\n", *(char *)&id[ATA_ID_FW_REV]);
- US_DEBUGP(" model[0] = 0x%x\n", *(char *)&id[ATA_ID_PROD]);
- US_DEBUGP(" max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff);
- US_DEBUGP(" dword_io = 0x%x\n", id[ATA_ID_DWORD_IO]);
- US_DEBUGP(" capability = 0x%x\n", id[ATA_ID_CAPABILITY] >> 8);
- US_DEBUGP(" tPIO = 0x%x\n", id[ATA_ID_OLD_PIO_MODES] >> 8);
- US_DEBUGP(" tDMA = 0x%x\n", id[ATA_ID_OLD_DMA_MODES] >> 8);
- US_DEBUGP(" field_valid = 0x%x\n", id[ATA_ID_FIELD_VALID]);
- US_DEBUGP(" cur_cyls = 0x%x\n", id[ATA_ID_CUR_CYLS]);
- US_DEBUGP(" cur_heads = 0x%x\n", id[ATA_ID_CUR_HEADS]);
- US_DEBUGP(" cur_sectors = 0x%x\n", id[ATA_ID_CUR_SECTORS]);
- US_DEBUGP(" cur_capacity = 0x%x\n", ata_id_u32(id, 57));
- US_DEBUGP(" multsect = 0x%x\n", id[ATA_ID_MULTSECT] & 0xff);
- US_DEBUGP(" lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY));
- US_DEBUGP(" command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]);
- US_DEBUGP(" command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]);
+ usb_stor_dbg(us, " Identify Data Structure:\n");
+ usb_stor_dbg(us, " config = 0x%x\n", id[ATA_ID_CONFIG]);
+ usb_stor_dbg(us, " cyls = 0x%x\n", id[ATA_ID_CYLS]);
+ usb_stor_dbg(us, " heads = 0x%x\n", id[ATA_ID_HEADS]);
+ usb_stor_dbg(us, " track_bytes = 0x%x\n", id[4]);
+ usb_stor_dbg(us, " sector_bytes = 0x%x\n", id[5]);
+ usb_stor_dbg(us, " sectors = 0x%x\n", id[ATA_ID_SECTORS]);
+ usb_stor_dbg(us, " serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]);
+ usb_stor_dbg(us, " buf_type = 0x%x\n", id[20]);
+ usb_stor_dbg(us, " buf_size = 0x%x\n", id[ATA_ID_BUF_SIZE]);
+ usb_stor_dbg(us, " ecc_bytes = 0x%x\n", id[22]);
+ usb_stor_dbg(us, " fw_rev[0] = 0x%x\n", *(char *)&id[ATA_ID_FW_REV]);
+ usb_stor_dbg(us, " model[0] = 0x%x\n", *(char *)&id[ATA_ID_PROD]);
+ usb_stor_dbg(us, " max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff);
+ usb_stor_dbg(us, " dword_io = 0x%x\n", id[ATA_ID_DWORD_IO]);
+ usb_stor_dbg(us, " capability = 0x%x\n", id[ATA_ID_CAPABILITY] >> 8);
+ usb_stor_dbg(us, " tPIO = 0x%x\n", id[ATA_ID_OLD_PIO_MODES] >> 8);
+ usb_stor_dbg(us, " tDMA = 0x%x\n", id[ATA_ID_OLD_DMA_MODES] >> 8);
+ usb_stor_dbg(us, " field_valid = 0x%x\n", id[ATA_ID_FIELD_VALID]);
+ usb_stor_dbg(us, " cur_cyls = 0x%x\n", id[ATA_ID_CUR_CYLS]);
+ usb_stor_dbg(us, " cur_heads = 0x%x\n", id[ATA_ID_CUR_HEADS]);
+ usb_stor_dbg(us, " cur_sectors = 0x%x\n", id[ATA_ID_CUR_SECTORS]);
+ usb_stor_dbg(us, " cur_capacity = 0x%x\n", ata_id_u32(id, 57));
+ usb_stor_dbg(us, " multsect = 0x%x\n", id[ATA_ID_MULTSECT] & 0xff);
+ usb_stor_dbg(us, " lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY));
+ usb_stor_dbg(us, " command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]);
+ usb_stor_dbg(us, " command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]);
}
/**************************************************************************
int retStatus = ISD200_GOOD;
u16 *id = info->id;
- US_DEBUGP("Entering isd200_get_inquiry_data\n");
+ usb_stor_dbg(us, "Entering isd200_get_inquiry_data\n");
/* set default to Master */
info->DeviceHead = ATA_ADDRESS_DEVHEAD_STD;
id, ATA_ID_WORDS * 2);
if (transferStatus != ISD200_TRANSPORT_GOOD) {
/* Error issuing ATA Command Identify */
- US_DEBUGP(" Error issuing ATA Command Identify\n");
+ usb_stor_dbg(us, " Error issuing ATA Command Identify\n");
retStatus = ISD200_ERROR;
} else {
/* ATA Command Identify successful */
__u16 *dest;
isd200_fix_driveid(id);
- isd200_dump_driveid(id);
+ isd200_dump_driveid(us, id);
memset(&info->InquiryData, 0, sizeof(info->InquiryData));
/* determine if it supports Media Status Notification */
if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) {
- US_DEBUGP(" Device supports Media Status Notification\n");
+ usb_stor_dbg(us, " Device supports Media Status Notification\n");
/* Indicate that it is enabled, even though it is not
* This allows the lock/unlock of the media to work
us->protocol_name = "Transparent SCSI";
us->proto_handler = usb_stor_transparent_scsi_command;
- US_DEBUGP("Protocol changed to: %s\n", us->protocol_name);
+ usb_stor_dbg(us, "Protocol changed to: %s\n",
+ us->protocol_name);
/* Free driver structure */
us->extra_destructor(info);
}
}
- US_DEBUGP("Leaving isd200_get_inquiry_data %08X\n", retStatus);
+ usb_stor_dbg(us, "Leaving isd200_get_inquiry_data %08X\n", retStatus);
return(retStatus);
}
/* SCSI Command */
switch (srb->cmnd[0]) {
case INQUIRY:
- US_DEBUGP(" ATA OUT - INQUIRY\n");
+ usb_stor_dbg(us, " ATA OUT - INQUIRY\n");
/* copy InquiryData */
usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData,
break;
case MODE_SENSE:
- US_DEBUGP(" ATA OUT - SCSIOP_MODE_SENSE\n");
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_MODE_SENSE\n");
/* Initialize the return buffer */
usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb);
ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
isd200_srb_set_bufflen(srb, 0);
} else {
- US_DEBUGP(" Media Status not supported, just report okay\n");
+ usb_stor_dbg(us, " Media Status not supported, just report okay\n");
srb->result = SAM_STAT_GOOD;
sendToTransport = 0;
}
break;
case TEST_UNIT_READY:
- US_DEBUGP(" ATA OUT - SCSIOP_TEST_UNIT_READY\n");
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_TEST_UNIT_READY\n");
if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED)
{
ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
isd200_srb_set_bufflen(srb, 0);
} else {
- US_DEBUGP(" Media Status not supported, just report okay\n");
+ usb_stor_dbg(us, " Media Status not supported, just report okay\n");
srb->result = SAM_STAT_GOOD;
sendToTransport = 0;
}
unsigned long capacity;
struct read_capacity_data readCapacityData;
- US_DEBUGP(" ATA OUT - SCSIOP_READ_CAPACITY\n");
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_READ_CAPACITY\n");
if (ata_id_has_lba(id))
capacity = ata_id_u32(id, ATA_ID_LBA_CAPACITY) - 1;
break;
case READ_10:
- US_DEBUGP(" ATA OUT - SCSIOP_READ\n");
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_READ\n");
lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]);
blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8];
break;
case WRITE_10:
- US_DEBUGP(" ATA OUT - SCSIOP_WRITE\n");
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_WRITE\n");
lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]);
blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8];
break;
case ALLOW_MEDIUM_REMOVAL:
- US_DEBUGP(" ATA OUT - SCSIOP_MEDIUM_REMOVAL\n");
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_MEDIUM_REMOVAL\n");
if (info->DeviceFlags & DF_REMOVABLE_MEDIA) {
- US_DEBUGP(" srb->cmnd[4] = 0x%X\n", srb->cmnd[4]);
+ usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n",
+ srb->cmnd[4]);
ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
isd200_srb_set_bufflen(srb, 0);
} else {
- US_DEBUGP(" Not removeable media, just report okay\n");
+ usb_stor_dbg(us, " Not removeable media, just report okay\n");
srb->result = SAM_STAT_GOOD;
sendToTransport = 0;
}
break;
case START_STOP:
- US_DEBUGP(" ATA OUT - SCSIOP_START_STOP_UNIT\n");
- US_DEBUGP(" srb->cmnd[4] = 0x%X\n", srb->cmnd[4]);
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_START_STOP_UNIT\n");
+ usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", srb->cmnd[4]);
if ((srb->cmnd[4] & 0x3) == 0x2) {
- US_DEBUGP(" Media Eject\n");
+ usb_stor_dbg(us, " Media Eject\n");
ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
ataCdb->generic.TransferBlockSize = 0;
ataCdb->generic.RegisterSelect = REG_COMMAND;
ataCdb->write.CommandByte = ATA_COMMAND_MEDIA_EJECT;
} else if ((srb->cmnd[4] & 0x3) == 0x1) {
- US_DEBUGP(" Get Media Status\n");
+ usb_stor_dbg(us, " Get Media Status\n");
ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
ataCdb->generic.TransferBlockSize = 1;
ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
isd200_srb_set_bufflen(srb, 0);
} else {
- US_DEBUGP(" Nothing to do, just report okay\n");
+ usb_stor_dbg(us, " Nothing to do, just report okay\n");
srb->result = SAM_STAT_GOOD;
sendToTransport = 0;
}
break;
default:
- US_DEBUGP("Unsupported SCSI command - 0x%X\n", srb->cmnd[0]);
+ usb_stor_dbg(us, "Unsupported SCSI command - 0x%X\n",
+ srb->cmnd[0]);
srb->result = DID_ERROR << 16;
sendToTransport = 0;
break;
if (retStatus == ISD200_GOOD) {
us->extra = info;
us->extra_destructor = isd200_free_info_ptrs;
- } else
- US_DEBUGP("ERROR - kmalloc failure\n");
+ }
return retStatus;
}
static int isd200_Initialization(struct us_data *us)
{
- US_DEBUGP("ISD200 Initialization...\n");
+ usb_stor_dbg(us, "ISD200 Initialization...\n");
/* Initialize ISD200 info struct */
if (isd200_init_info(us) == ISD200_ERROR) {
- US_DEBUGP("ERROR Initializing ISD200 Info struct\n");
+ usb_stor_dbg(us, "ERROR Initializing ISD200 Info struct\n");
} else {
/* Get device specific data */
if (isd200_get_inquiry_data(us) != ISD200_GOOD)
- US_DEBUGP("ISD200 Initialization Failure\n");
+ usb_stor_dbg(us, "ISD200 Initialization Failure\n");
else
- US_DEBUGP("ISD200 Initialization complete\n");
+ usb_stor_dbg(us, "ISD200 Initialization complete\n");
}
return 0;
/* Make sure driver was initialized */
if (us->extra == NULL)
- US_DEBUGP("ERROR Driver not initialized\n");
+ usb_stor_dbg(us, "ERROR Driver not initialized\n");
scsi_set_resid(srb, 0);
/* scsi_bufflen might change in protocol translation to ata */
if (len == 0)
return USB_STOR_XFER_GOOD;
- US_DEBUGP("jumpshot_bulk_read: len = %d\n", len);
+ usb_stor_dbg(us, "len = %d\n", len);
return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
data, len, NULL);
}
if (len == 0)
return USB_STOR_XFER_GOOD;
- US_DEBUGP("jumpshot_bulk_write: len = %d\n", len);
+ usb_stor_dbg(us, "len = %d\n", len);
return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
data, len, NULL);
}
return USB_STOR_TRANSPORT_ERROR;
if (us->iobuf[0] != 0x50) {
- US_DEBUGP("jumpshot_get_status: 0x%2x\n",
- us->iobuf[0]);
+ usb_stor_dbg(us, "0x%2x\n", us->iobuf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
if (result != USB_STOR_XFER_GOOD)
goto leave;
- US_DEBUGP("jumpshot_read_data: %d bytes\n", len);
+ usb_stor_dbg(us, "%d bytes\n", len);
// Store the data in the transfer buffer
usb_stor_access_xfer_buf(buffer, len, us->srb,
} while ((result != USB_STOR_TRANSPORT_GOOD) && (waitcount < 10));
if (result != USB_STOR_TRANSPORT_GOOD)
- US_DEBUGP("jumpshot_write_data: Gah! Waitcount = 10. Bad write!?\n");
+ usb_stor_dbg(us, "Gah! Waitcount = 10. Bad write!?\n");
sector += thistime;
totallen -= len;
0, 0x20, 0, 6, command, 2);
if (rc != USB_STOR_XFER_GOOD) {
- US_DEBUGP("jumpshot_id_device: Gah! "
- "send_control for read_capacity failed\n");
+ usb_stor_dbg(us, "Gah! send_control for read_capacity failed\n");
rc = USB_STOR_TRANSPORT_ERROR;
goto leave;
}
switch (pc) {
case 0x0:
- US_DEBUGP("jumpshot_handle_mode_sense: Current values\n");
- break;
+ usb_stor_dbg(us, "Current values\n");
+ break;
case 0x1:
- US_DEBUGP("jumpshot_handle_mode_sense: Changeable values\n");
- break;
+ usb_stor_dbg(us, "Changeable values\n");
+ break;
case 0x2:
- US_DEBUGP("jumpshot_handle_mode_sense: Default values\n");
- break;
+ usb_stor_dbg(us, "Default values\n");
+ break;
case 0x3:
- US_DEBUGP("jumpshot_handle_mode_sense: Saves values\n");
- break;
+ usb_stor_dbg(us, "Saves values\n");
+ break;
}
memset(ptr, 0, 8);
if (!us->extra) {
us->extra = kzalloc(sizeof(struct jumpshot_info), GFP_NOIO);
- if (!us->extra) {
- US_DEBUGP("jumpshot_transport: Gah! Can't allocate storage for jumpshot info struct!\n");
+ if (!us->extra)
return USB_STOR_TRANSPORT_ERROR;
- }
+
us->extra_destructor = jumpshot_info_destructor;
}
info = (struct jumpshot_info *) (us->extra);
if (srb->cmnd[0] == INQUIRY) {
- US_DEBUGP("jumpshot_transport: INQUIRY. Returning bogus response.\n");
+ usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
memcpy(ptr, inquiry_response, sizeof(inquiry_response));
fill_inquiry_response(us, ptr, 36);
return USB_STOR_TRANSPORT_GOOD;
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("jumpshot_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
- info->sectors, info->ssize);
+ usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
+ info->sectors, info->ssize);
// build the reply
//
}
if (srb->cmnd[0] == MODE_SELECT_10) {
- US_DEBUGP("jumpshot_transport: Gah! MODE_SELECT_10.\n");
+ usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
return USB_STOR_TRANSPORT_ERROR;
}
blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
- US_DEBUGP("jumpshot_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks);
+ usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n",
+ block, blocks);
return jumpshot_read_data(us, info, block, blocks);
}
blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
- US_DEBUGP("jumpshot_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks);
+ usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n",
+ block, blocks);
return jumpshot_read_data(us, info, block, blocks);
}
blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
- US_DEBUGP("jumpshot_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks);
+ usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n",
+ block, blocks);
return jumpshot_write_data(us, info, block, blocks);
}
blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
- US_DEBUGP("jumpshot_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks);
+ usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n",
+ block, blocks);
return jumpshot_write_data(us, info, block, blocks);
}
if (srb->cmnd[0] == TEST_UNIT_READY) {
- US_DEBUGP("jumpshot_transport: TEST_UNIT_READY.\n");
+ usb_stor_dbg(us, "TEST_UNIT_READY\n");
return jumpshot_get_status(us);
}
if (srb->cmnd[0] == REQUEST_SENSE) {
- US_DEBUGP("jumpshot_transport: REQUEST_SENSE.\n");
+ usb_stor_dbg(us, "REQUEST_SENSE\n");
memset(ptr, 0, 18);
ptr[0] = 0xF0;
}
if (srb->cmnd[0] == MODE_SENSE) {
- US_DEBUGP("jumpshot_transport: MODE_SENSE_6 detected\n");
+ usb_stor_dbg(us, "MODE_SENSE_6 detected\n");
return jumpshot_handle_mode_sense(us, srb, 1);
}
if (srb->cmnd[0] == MODE_SENSE_10) {
- US_DEBUGP("jumpshot_transport: MODE_SENSE_10 detected\n");
+ usb_stor_dbg(us, "MODE_SENSE_10 detected\n");
return jumpshot_handle_mode_sense(us, srb, 0);
}
if (srb->cmnd[0] == START_STOP) {
/* this is used by sd.c'check_scsidisk_media_change to detect
media change */
- US_DEBUGP("jumpshot_transport: START_STOP.\n");
+ usb_stor_dbg(us, "START_STOP\n");
/* the first jumpshot_id_device after a media change returns
an error (determined experimentally) */
rc = jumpshot_id_device(us, info);
return rc;
}
- US_DEBUGP("jumpshot_transport: Gah! Unknown command: %d (0x%x)\n",
- srb->cmnd[0], srb->cmnd[0]);
+ usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+ srb->cmnd[0], srb->cmnd[0]);
info->sense_key = 0x05;
info->sense_asc = 0x20;
info->sense_ascq = 0x00;
static unsigned char seq = 1;
struct karma_data *data = (struct karma_data *) us->extra;
- US_DEBUGP("karma: sending command %04x\n", cmd);
+ usb_stor_dbg(us, "sending command %04x\n", cmd);
memset(us->iobuf, 0, RIO_SEND_LEN);
memcpy(us->iobuf, RIO_PREFIX, RIO_PREFIX_LEN);
us->iobuf[5] = cmd;
if (seq == 0)
seq = 1;
- US_DEBUGP("karma: sent command %04x\n", cmd);
+ usb_stor_dbg(us, "sent command %04x\n", cmd);
return 0;
err:
- US_DEBUGP("karma: command %04x failed\n", cmd);
+ usb_stor_dbg(us, "command %04x failed\n", cmd);
return USB_STOR_TRANSPORT_FAILED;
}
char *buffer;
int result;
- US_DEBUGP("Option MS: %s", "DEVICE MODE SWITCH\n");
+ usb_stor_dbg(us, "Option MS: %s\n", "DEVICE MODE SWITCH");
buffer = kzalloc(RESPONSE_LEN, GFP_KERNEL);
if (buffer == NULL)
char *buffer;
int result;
- US_DEBUGP("Option MS: %s", "device inquiry for vendor name\n");
+ usb_stor_dbg(us, "Option MS: %s\n", "device inquiry for vendor name");
buffer = kzalloc(0x24, GFP_KERNEL);
if (buffer == NULL)
{
int result;
- US_DEBUGP("Option MS: option_ms_init called\n");
+ usb_stor_dbg(us, "Option MS: %s\n", "option_ms_init called");
/* Additional test for vendor information via INQUIRY,
* because some vendor/product IDs are ambiguous
*/
result = option_inquiry(us);
if (result != 0) {
- US_DEBUGP("Option MS: vendor is not Option or not determinable,"
- " no action taken\n");
+ usb_stor_dbg(us, "Option MS: %s\n",
+ "vendor is not Option or not determinable, no action taken");
return 0;
} else
- US_DEBUGP("Option MS: this is a genuine Option device,"
- " proceeding\n");
+ usb_stor_dbg(us, "Option MS: %s\n",
+ "this is a genuine Option device, proceeding");
/* Force Modem mode */
if (option_zero_cd == ZCD_FORCE_MODEM) {
- US_DEBUGP("Option MS: %s", "Forcing Modem Mode\n");
+ usb_stor_dbg(us, "Option MS: %s\n", "Forcing Modem Mode");
result = option_rezero(us);
if (result != USB_STOR_XFER_GOOD)
- US_DEBUGP("Option MS: Failed to switch to modem mode.\n");
+ usb_stor_dbg(us, "Option MS: %s\n",
+ "Failed to switch to modem mode");
return -EIO;
} else if (option_zero_cd == ZCD_ALLOW_MS) {
/* Allow Mass Storage mode (keep CD-Rom) */
- US_DEBUGP("Option MS: %s", "Allowing Mass Storage Mode if device"
- " requests it\n");
+ usb_stor_dbg(us, "Option MS: %s\n",
+ "Allowing Mass Storage Mode if device requests it");
}
return 0;
/* check bulk status */
if (bcs->Signature != cpu_to_le32(US_BULK_CS_SIGN)) {
- US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n",
- le32_to_cpu(bcs->Signature), US_BULK_CS_SIGN);
+ usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n",
+ le32_to_cpu(bcs->Signature), US_BULK_CS_SIGN);
return USB_STOR_TRANSPORT_ERROR;
}
USB_RECIP_INTERFACE,
0, us->ifnum, us->iobuf, 1, 10 * HZ);
- US_DEBUGP("GetMaxLUN command result is %d, data is %d\n",
- result, us->iobuf[0]);
+ usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n",
+ result, us->iobuf[0]);
/* if we have a successful request, return the result */
if (result > 0)
if (buf == NULL)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len);
+ usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len);
cmnd[0] = 0xF0;
cmnd[1] = 0x0D;
if (buf == NULL)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len);
+ usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len);
cmnd[0] = 0xF0;
cmnd[1] = 0x0E;
if (buf == NULL)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("%s, lun = %d\n", __func__, lun);
+ usb_stor_dbg(us, "lun = %d\n", lun);
cmnd[0] = 0xF0;
cmnd[1] = 0x09;
if (retval != STATUS_SUCCESS)
return -EIO;
- US_DEBUGP("chip->status_len = %d\n", chip->status_len);
+ usb_stor_dbg(us, "chip->status_len = %d\n", chip->status_len);
chip->status[lun].vid = ((u16) buf[0] << 8) | buf[1];
chip->status[lun].pid = ((u16) buf[2] << 8) | buf[3];
u8 cmnd[12] = {0};
u8 *buf;
- US_DEBUGP("%s, addr = 0xfe47, len = %d\n", __FUNCTION__, len);
+ usb_stor_dbg(us, "addr = 0xfe47, len = %d\n", len);
buf = kmemdup(data, len, GFP_NOIO);
if (!buf)
value &= ~0x03;
}
- US_DEBUGP("In %s,set 0xfe47 to 0x%x\n", __func__, value);
+ usb_stor_dbg(us, "set 0xfe47 to 0x%x\n", value);
/* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
retval = __do_config_autodelink(us, &value, 1);
int retval;
u8 value;
- US_DEBUGP("%s: <---\n", __func__);
-
if (!CHK_AUTO_DELINK(chip))
return 0;
}
}
- US_DEBUGP("%s: --->\n", __func__);
-
return 0;
}
int retval;
u8 value;
- US_DEBUGP("%s: <---\n", __func__);
-
if (!CHK_AUTO_DELINK(chip))
return 0;
}
}
- US_DEBUGP("%s: --->\n", __func__);
-
return 0;
}
int retval;
u8 val;
- US_DEBUGP("%s: <---\n", __func__);
-
if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) {
- US_DEBUGP("Not the specified device, return immediately!\n");
+ usb_stor_dbg(us, "Not the specified device, return immediately!\n");
} else {
retval = rts51x_read_mem(us, 0xFD6F, &val, 1);
if (retval == STATUS_SUCCESS && (val & 0x1F) == 0) {
val = 0x1F;
retval = rts51x_write_mem(us, 0xFD70, &val, 1);
if (retval != STATUS_SUCCESS)
- US_DEBUGP("Write memory fail\n");
+ usb_stor_dbg(us, "Write memory fail\n");
} else {
- US_DEBUGP("Read memory fail, OR (val & 0x1F) != 0\n");
+ usb_stor_dbg(us, "Read memory fail, OR (val & 0x1F) != 0\n");
}
}
-
- US_DEBUGP("%s: --->\n", __func__);
}
#ifdef CONFIG_REALTEK_AUTOPM
int retval;
u8 buf[13];
- US_DEBUGP("%s: <---\n", __func__);
-
if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) {
- US_DEBUGP("Not the specified device, return immediately!\n");
+ usb_stor_dbg(us, "Not the specified device, return immediately!\n");
} else {
retval = rts51x_read_mem(us, 0xFD6F, buf, 1);
if (retval == STATUS_SUCCESS && (buf[0] & 0x24) == 0x24) {
buf[0] |= 0x04;
retval = rts51x_write_mem(us, 0xFD70, buf, 1);
if (retval != STATUS_SUCCESS)
- US_DEBUGP("Write memory fail\n");
+ usb_stor_dbg(us, "Write memory fail\n");
} else {
- US_DEBUGP("Read memory fail\n");
+ usb_stor_dbg(us, "Read memory fail\n");
}
} else {
- US_DEBUGP("Read memory fail, OR (buf[0]&0x24)!=0x24\n");
+ usb_stor_dbg(us, "Read memory fail, OR (buf[0]&0x24)!=0x24\n");
}
}
-
- US_DEBUGP("%s: --->\n", __func__);
}
static void rts51x_modi_suspend_timer(struct rts51x_chip *chip)
{
- US_DEBUGP("%s: <---, state:%d\n", __func__, rts51x_get_stat(chip));
+ struct us_data *us = chip->us;
+
+ usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip));
chip->timer_expires = jiffies + msecs_to_jiffies(1000*ss_delay);
mod_timer(&chip->rts51x_suspend_timer, chip->timer_expires);
-
- US_DEBUGP("%s: --->\n", __func__);
}
static void rts51x_suspend_timer_fn(unsigned long data)
struct rts51x_chip *chip = (struct rts51x_chip *)data;
struct us_data *us = chip->us;
- US_DEBUGP("%s: <---\n", __func__);
-
switch (rts51x_get_stat(chip)) {
case RTS51X_STAT_INIT:
case RTS51X_STAT_RUN:
break;
case RTS51X_STAT_IDLE:
case RTS51X_STAT_SS:
- US_DEBUGP("%s: RTS51X_STAT_SS, intf->pm_usage_cnt:%d,"
- "power.usage:%d\n", __func__,
- atomic_read(&us->pusb_intf->pm_usage_cnt),
- atomic_read(&us->pusb_intf->dev.power.usage_count));
+ usb_stor_dbg(us, "RTS51X_STAT_SS, intf->pm_usage_cnt:%d, power.usage:%d\n",
+ atomic_read(&us->pusb_intf->pm_usage_cnt),
+ atomic_read(&us->pusb_intf->dev.power.usage_count));
if (atomic_read(&us->pusb_intf->pm_usage_cnt) > 0) {
- US_DEBUGP("%s: Ready to enter SS state.\n",
- __func__);
+ usb_stor_dbg(us, "Ready to enter SS state\n");
rts51x_set_stat(chip, RTS51X_STAT_SS);
/* ignore mass storage interface's children */
pm_suspend_ignore_children(&us->pusb_intf->dev, true);
usb_autopm_put_interface_async(us->pusb_intf);
- US_DEBUGP("%s: RTS51X_STAT_SS 01,"
- "intf->pm_usage_cnt:%d, power.usage:%d\n",
- __func__,
- atomic_read(&us->pusb_intf->pm_usage_cnt),
- atomic_read(
- &us->pusb_intf->dev.power.usage_count));
+ usb_stor_dbg(us, "RTS51X_STAT_SS 01, intf->pm_usage_cnt:%d, power.usage:%d\n",
+ atomic_read(&us->pusb_intf->pm_usage_cnt),
+ atomic_read(&us->pusb_intf->dev.power.usage_count));
}
break;
default:
- US_DEBUGP("%s: Unknonwn state !!!\n", __func__);
+ usb_stor_dbg(us, "Unknown state !!!\n");
break;
}
-
- US_DEBUGP("%s: --->\n", __func__);
}
static inline int working_scsi(struct scsi_cmnd *srb)
};
int ret;
- US_DEBUGP("%s: <---\n", __func__);
-
if (working_scsi(srb)) {
- US_DEBUGP("%s: working scsi, intf->pm_usage_cnt:%d,"
- "power.usage:%d\n", __func__,
- atomic_read(&us->pusb_intf->pm_usage_cnt),
- atomic_read(&us->pusb_intf->dev.power.usage_count));
+ usb_stor_dbg(us, "working scsi, intf->pm_usage_cnt:%d, power.usage:%d\n",
+ atomic_read(&us->pusb_intf->pm_usage_cnt),
+ atomic_read(&us->pusb_intf->dev.power.usage_count));
if (atomic_read(&us->pusb_intf->pm_usage_cnt) <= 0) {
ret = usb_autopm_get_interface(us->pusb_intf);
- US_DEBUGP("%s: working scsi, ret=%d\n", __func__, ret);
+ usb_stor_dbg(us, "working scsi, ret=%d\n", ret);
}
if (rts51x_get_stat(chip) != RTS51X_STAT_RUN)
rts51x_set_stat(chip, RTS51X_STAT_RUN);
chip->proto_handler_backup(srb, us);
} else {
if (rts51x_get_stat(chip) == RTS51X_STAT_SS) {
- US_DEBUGP("%s: NOT working scsi\n", __func__);
+ usb_stor_dbg(us, "NOT working scsi\n");
if ((srb->cmnd[0] == TEST_UNIT_READY) &&
(chip->pwr_state == US_SUSPEND)) {
if (TST_LUN_READY(chip, srb->device->lun)) {
media_not_present,
US_SENSE_SIZE);
}
- US_DEBUGP("%s: TEST_UNIT_READY--->\n",
- __func__);
+ usb_stor_dbg(us, "TEST_UNIT_READY\n");
goto out;
}
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
} else {
srb->result = SAM_STAT_GOOD;
}
- US_DEBUGP("%s: ALLOW_MEDIUM_REMOVAL--->\n",
- __func__);
+ usb_stor_dbg(us, "ALLOW_MEDIUM_REMOVAL\n");
goto out;
}
} else {
- US_DEBUGP("%s: NOT working scsi, not SS\n", __func__);
+ usb_stor_dbg(us, "NOT working scsi, not SS\n");
chip->proto_handler_backup(srb, us);
/* Check whether card is plugged in */
if (srb->cmnd[0] == TEST_UNIT_READY) {
}
}
out:
- US_DEBUGP("%s: state:%d\n", __func__, rts51x_get_stat(chip));
+ usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip));
if (rts51x_get_stat(chip) == RTS51X_STAT_RUN)
rts51x_modi_suspend_timer(chip);
-
- US_DEBUGP("%s: --->\n", __func__);
}
static int realtek_cr_autosuspend_setup(struct us_data *us)
retval = rts51x_read_status(us, 0, buf, 16, &(chip->status_len));
if (retval != STATUS_SUCCESS) {
- US_DEBUGP("Read status fail\n");
+ usb_stor_dbg(us, "Read status fail\n");
return -EIO;
}
status = chip->status;
static void realtek_cr_destructor(void *extra)
{
struct rts51x_chip *chip = (struct rts51x_chip *)extra;
-
- US_DEBUGP("%s: <---\n", __func__);
+ struct us_data *us;
if (!chip)
return;
+
+ us = chip->us;
+
#ifdef CONFIG_REALTEK_AUTOPM
if (ss_en) {
del_timer(&chip->rts51x_suspend_timer);
{
struct us_data *us = usb_get_intfdata(iface);
- US_DEBUGP("%s: <---\n", __func__);
-
/* wait until no command is running */
mutex_lock(&us->dev_mutex);
mutex_unlock(&us->dev_mutex);
- US_DEBUGP("%s: --->\n", __func__);
-
return 0;
}
{
struct us_data *us = usb_get_intfdata(iface);
- US_DEBUGP("%s: <---\n", __func__);
-
fw5895_init(us);
config_autodelink_after_power_on(us);
- US_DEBUGP("%s: --->\n", __func__);
-
return 0;
}
#else
us->extra_destructor = realtek_cr_destructor;
us->max_lun = chip->max_lun = rts51x_get_max_lun(us);
- US_DEBUGP("chip->max_lun = %d\n", chip->max_lun);
+ usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun);
size = (chip->max_lun + 1) * sizeof(struct rts51x_status);
chip->status = kzalloc(size, GFP_KERNEL);
}
#endif
- US_DEBUGP("chip->flag = 0x%x\n", chip->flag);
+ usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag);
(void)config_autodelink_after_power_on(us);
struct us_data *us;
int result;
- US_DEBUGP("Probe Realtek Card Reader!\n");
+ dev_dbg(&intf->dev, "Probe Realtek Card Reader!\n");
result = usb_stor_probe1(&us, intf, id,
(id - realtek_cr_ids) +
{
struct us_data *us = host_to_us(srb->device->host);
- US_DEBUGP("%s called\n", __func__);
-
/* check for state-transition errors */
if (us->srb != NULL) {
printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n",
/* fail the command if we are disconnecting */
if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
- US_DEBUGP("Fail command during disconnect\n");
+ usb_stor_dbg(us, "Fail command during disconnect\n");
srb->result = DID_NO_CONNECT << 16;
done(srb);
return 0;
{
struct us_data *us = host_to_us(srb->device->host);
- US_DEBUGP("%s called\n", __func__);
+ usb_stor_dbg(us, "%s called\n", __func__);
/* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
* bits are protected by the host lock. */
/* Is this command still active? */
if (us->srb != srb) {
scsi_unlock(us_to_host(us));
- US_DEBUGP ("-- nothing to abort\n");
+ usb_stor_dbg(us, "-- nothing to abort\n");
return FAILED;
}
struct us_data *us = host_to_us(srb->device->host);
int result;
- US_DEBUGP("%s called\n", __func__);
+ usb_stor_dbg(us, "%s called\n", __func__);
/* lock the device pointers and do the reset */
mutex_lock(&(us->dev_mutex));
struct us_data *us = host_to_us(srb->device->host);
int result;
- US_DEBUGP("%s called\n", __func__);
+ usb_stor_dbg(us, "%s called\n", __func__);
+
result = usb_stor_port_reset(us);
return result < 0 ? FAILED : SUCCESS;
}
#define LSB_of(s) ((s)&0xFF)
#define MSB_of(s) ((s)>>8)
-/* #define US_DEBUGP printk */
-
/*
* First some stuff that does not belong here:
* data on SmartMedia and other cards, completely
result = sddr09_send_scsi_command(us, command, 6);
- US_DEBUGP("sddr09_test_unit_ready returns %d\n", result);
+ usb_stor_dbg(us, "sddr09_test_unit_ready returns %d\n", result);
return result;
}
result = sddr09_send_scsi_command(us, command, 12);
if (result) {
- US_DEBUGP("Result for send_control in sddr09_read2%d %d\n",
- x, result);
+ usb_stor_dbg(us, "Result for send_control in sddr09_read2%d %d\n",
+ x, result);
return result;
}
buf, bulklen, use_sg, NULL);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n",
- x, result);
+ usb_stor_dbg(us, "Result for bulk_transfer in sddr09_read2%d %d\n",
+ x, result);
return -EIO;
}
return 0;
int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) {
int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT);
- US_DEBUGP("sddr09_read22: reading %d pages, %d bytes\n",
- nr_of_pages, bulklen);
+ usb_stor_dbg(us, "reading %d pages, %d bytes\n", nr_of_pages, bulklen);
return sddr09_readX(us, 2, fromaddress, nr_of_pages, bulklen,
buf, use_sg);
}
unsigned char *command = us->iobuf;
int result;
- US_DEBUGP("sddr09_erase: erase address %lu\n", Eaddress);
+ usb_stor_dbg(us, "erase address %lu\n", Eaddress);
memset(command, 0, 12);
command[0] = 0xEA;
result = sddr09_send_scsi_command(us, command, 12);
if (result)
- US_DEBUGP("Result for send_control in sddr09_erase %d\n",
- result);
+ usb_stor_dbg(us, "Result for send_control in sddr09_erase %d\n",
+ result);
return result;
}
result = sddr09_send_scsi_command(us, command, 12);
if (result) {
- US_DEBUGP("Result for send_control in sddr09_writeX %d\n",
- result);
+ usb_stor_dbg(us, "Result for send_control in sddr09_writeX %d\n",
+ result);
return result;
}
buf, bulklen, use_sg, NULL);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n",
- result);
+ usb_stor_dbg(us, "Result for bulk_transfer in sddr09_writeX %d\n",
+ result);
return -EIO;
}
return 0;
result = sddr09_send_scsi_command(us, command, 4*nsg+3);
if (result) {
- US_DEBUGP("Result for send_control in sddr09_read_sg %d\n",
- result);
+ usb_stor_dbg(us, "Result for send_control in sddr09_read_sg %d\n",
+ result);
return result;
}
buf, bulklen, NULL);
kfree(buf);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Result for bulk_transfer in sddr09_read_sg %d\n",
- result);
+ usb_stor_dbg(us, "Result for bulk_transfer in sddr09_read_sg %d\n",
+ result);
return -EIO;
}
unsigned char *data = us->iobuf;
int result;
- US_DEBUGP("Reading status...\n");
+ usb_stor_dbg(us, "Reading status...\n");
memset(command, 0, 12);
command[0] = 0xEC;
/* Not overflowing capacity? */
if (lba >= maxlba) {
- US_DEBUGP("Error: Requested lba %u exceeds "
- "maximum %u\n", lba, maxlba);
+ usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n",
+ lba, maxlba);
result = -EIO;
break;
}
if (pba == UNDEF) { /* this lba was never written */
- US_DEBUGP("Read %d zero pages (LBA %d) page %d\n",
- pages, lba, page);
+ usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n",
+ pages, lba, page);
/* This is not really an error. It just means
that the block has never been written.
memset(buffer, 0, len);
} else {
- US_DEBUGP("Read %d pages, from PBA %d"
- " (LBA %d) page %d\n",
- pages, pba, lba, page);
+ usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n",
+ pages, pba, lba, page);
address = ((pba << info->blockshift) + page) <<
info->pageshift;
cptr = bptr + info->pagesize;
nand_compute_ecc(bptr, ecc);
if (!nand_compare_ecc(cptr+13, ecc)) {
- US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n",
- i, pba);
+ usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n",
+ i, pba);
nand_store_ecc(cptr+13, ecc);
}
nand_compute_ecc(bptr+(info->pagesize / 2), ecc);
if (!nand_compare_ecc(cptr+8, ecc)) {
- US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n",
- i, pba);
+ usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n",
+ i, pba);
nand_store_ecc(cptr+8, ecc);
}
cptr[6] = cptr[11] = MSB_of(lbap);
nand_store_ecc(cptr+8, ecc);
}
- US_DEBUGP("Rewrite PBA %d (LBA %d)\n", pba, lba);
+ usb_stor_dbg(us, "Rewrite PBA %d (LBA %d)\n", pba, lba);
result = sddr09_write_inplace(us, address>>1, info->blocksize,
info->pageshift, blockbuffer, 0);
- US_DEBUGP("sddr09_write_inplace returns %d\n", result);
+ usb_stor_dbg(us, "sddr09_write_inplace returns %d\n", result);
#if 0
{
unsigned char status = 0;
int result2 = sddr09_read_status(us, &status);
if (result2)
- US_DEBUGP("sddr09_write_inplace: cannot read status\n");
+ usb_stor_dbg(us, "cannot read status\n");
else if (status != 0xc0)
- US_DEBUGP("sddr09_write_inplace: status after write: 0x%x\n",
- status);
+ usb_stor_dbg(us, "status after write: 0x%x\n", status);
}
#endif
/* Not overflowing capacity? */
if (lba >= maxlba) {
- US_DEBUGP("Error: Requested lba %u exceeds "
- "maximum %u\n", lba, maxlba);
+ usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n",
+ lba, maxlba);
result = -EIO;
break;
}
unsigned char *content,
int use_sg) {
- US_DEBUGP("Read control address %lu, blocks %d\n",
- address, blocks);
+ usb_stor_dbg(us, "Read control address %lu, blocks %d\n",
+ address, blocks);
return sddr09_read21(us, address, blocks,
CONTROL_SHIFT, content, use_sg);
result = sddr09_read_status(us, &status);
if (result) {
- US_DEBUGP("sddr09_get_wp: read_status fails\n");
+ usb_stor_dbg(us, "read_status fails\n");
return result;
}
- US_DEBUGP("sddr09_get_wp: status 0x%02X", status);
+ usb_stor_dbg(us, "status 0x%02X", status);
if ((status & 0x80) == 0) {
info->flags |= SDDR09_WP; /* write protected */
- US_DEBUGP(" WP");
+ US_DEBUGPX(" WP");
}
if (status & 0x40)
- US_DEBUGP(" Ready");
+ US_DEBUGPX(" Ready");
if (status & LUNBITS)
- US_DEBUGP(" Suspended");
+ US_DEBUGPX(" Suspended");
if (status & 0x1)
- US_DEBUGP(" Error");
- US_DEBUGP("\n");
+ US_DEBUGPX(" Error");
+ US_DEBUGPX("\n");
return 0;
}
char blurbtxt[256];
int result;
- US_DEBUGP("Reading capacity...\n");
+ usb_stor_dbg(us, "Reading capacity...\n");
result = sddr09_read_deviceID(us, deviceID);
if (result) {
- US_DEBUGP("Result of read_deviceID is %d\n", result);
+ usb_stor_dbg(us, "Result of read_deviceID is %d\n", result);
printk(KERN_WARNING "sddr09: could not read card info\n");
return NULL;
}
lbact += ct;
}
info->lbact = lbact;
- US_DEBUGP("Found %d LBA's\n", lbact);
+ usb_stor_dbg(us, "Found %d LBA's\n", lbact);
result = 0;
done:
/* set the configuration -- STALL is an acceptable response here */
if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) {
- US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev
- ->actconfig->desc.bConfigurationValue);
+ usb_stor_dbg(us, "active config #%d != 1 ??\n",
+ us->pusb_dev->actconfig->desc.bConfigurationValue);
return -EINVAL;
}
result = usb_reset_configuration(us->pusb_dev);
- US_DEBUGP("Result of usb_reset_configuration is %d\n", result);
+ usb_stor_dbg(us, "Result of usb_reset_configuration is %d\n", result);
if (result == -EPIPE) {
- US_DEBUGP("-- stall on control interface\n");
+ usb_stor_dbg(us, "-- stall on control interface\n");
} else if (result != 0) {
/* it's not a stall, but another error -- time to bail */
- US_DEBUGP("-- Unknown error. Rejecting device\n");
+ usb_stor_dbg(us, "-- Unknown error. Rejecting device\n");
return -EINVAL;
}
result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2);
if (result) {
- US_DEBUGP("sddr09_init: send_command fails\n");
+ usb_stor_dbg(us, "send_command fails\n");
return result;
}
- US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]);
+ usb_stor_dbg(us, "%02X %02X\n", data[0], data[1]);
// get 07 02
result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2);
if (result) {
- US_DEBUGP("sddr09_init: 2nd send_command fails\n");
+ usb_stor_dbg(us, "2nd send_command fails\n");
return result;
}
- US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]);
+ usb_stor_dbg(us, "%02X %02X\n", data[0], data[1]);
// get 07 00
result = sddr09_request_sense(us, data, 18);
{
int ret;
- US_DEBUGP("dpcm_transport: LUN=%d\n", srb->device->lun);
+ usb_stor_dbg(us, "LUN=%d\n", srb->device->lun);
switch (srb->device->lun) {
case 0:
break;
default:
- US_DEBUGP("dpcm_transport: Invalid LUN %d\n",
- srb->device->lun);
+ usb_stor_dbg(us, "Invalid LUN %d\n", srb->device->lun);
ret = USB_STOR_TRANSPORT_ERROR;
break;
}
or for all pages. */
/* %% We should check DBD %% */
if (modepage == 0x01 || modepage == 0x3F) {
- US_DEBUGP("SDDR09: Dummy up request for "
- "mode page 0x%x\n", modepage);
+ usb_stor_dbg(us, "Dummy up request for mode page 0x%x\n",
+ modepage);
memcpy(ptr, mode_page_01, sizeof(mode_page_01));
((__be16*)ptr)[0] = cpu_to_be16(sizeof(mode_page_01) - 2);
page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
- US_DEBUGP("READ_10: read page %d pagect %d\n",
- page, pages);
+ usb_stor_dbg(us, "READ_10: read page %d pagect %d\n",
+ page, pages);
result = sddr09_read_data(us, page, pages);
return (result == 0 ? USB_STOR_TRANSPORT_GOOD :
page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
- US_DEBUGP("WRITE_10: write page %d pagect %d\n",
- page, pages);
+ usb_stor_dbg(us, "WRITE_10: write page %d pagect %d\n",
+ page, pages);
result = sddr09_write_data(us, page, pages);
return (result == 0 ? USB_STOR_TRANSPORT_GOOD :
for (i=0; i<12; i++)
sprintf(ptr+strlen(ptr), "%02X ", srb->cmnd[i]);
- US_DEBUGP("SDDR09: Send control for command %s\n", ptr);
+ usb_stor_dbg(us, "Send control for command %s\n", ptr);
result = sddr09_send_scsi_command(us, srb->cmnd, 12);
if (result) {
- US_DEBUGP("sddr09_transport: sddr09_send_scsi_command "
- "returns %d\n", result);
+ usb_stor_dbg(us, "sddr09_send_scsi_command returns %d\n",
+ result);
return USB_STOR_TRANSPORT_ERROR;
}
unsigned int pipe = (srb->sc_data_direction == DMA_TO_DEVICE)
? us->send_bulk_pipe : us->recv_bulk_pipe;
- US_DEBUGP("SDDR09: %s %d bytes\n",
- (srb->sc_data_direction == DMA_TO_DEVICE) ?
- "sending" : "receiving",
- scsi_bufflen(srb));
+ usb_stor_dbg(us, "%s %d bytes\n",
+ (srb->sc_data_direction == DMA_TO_DEVICE) ?
+ "sending" : "receiving",
+ scsi_bufflen(srb));
result = usb_stor_bulk_srb(us, pipe, srb);
result = sddr55_bulk_transport(us,
DMA_TO_DEVICE, command, 8);
- US_DEBUGP("Result for send_command in status %d\n",
- result);
+ usb_stor_dbg(us, "Result for send_command in status %d\n", result);
if (result != USB_STOR_XFER_GOOD) {
set_sense_info (4, 0, 0); /* hardware error */
info->blocksize - page);
len = pages << info->pageshift;
- US_DEBUGP("Read %02X pages, from PBA %04X"
- " (LBA %04X) page %02X\n",
- pages, pba, lba, page);
+ usb_stor_dbg(us, "Read %02X pages, from PBA %04X (LBA %04X) page %02X\n",
+ pages, pba, lba, page);
if (pba == NOT_ALLOCATED) {
/* no pba for this lba, fill with zeroes */
result = sddr55_bulk_transport(us,
DMA_TO_DEVICE, command, 8);
- US_DEBUGP("Result for send_command in read_data %d\n",
- result);
+ usb_stor_dbg(us, "Result for send_command in read_data %d\n",
+ result);
if (result != USB_STOR_XFER_GOOD) {
result = USB_STOR_TRANSPORT_ERROR;
usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg, &offset, FROM_XFER_BUF);
- US_DEBUGP("Write %02X pages, to PBA %04X"
- " (LBA %04X) page %02X\n",
- pages, pba, lba, page);
+ usb_stor_dbg(us, "Write %02X pages, to PBA %04X (LBA %04X) page %02X\n",
+ pages, pba, lba, page);
command[4] = 0;
/* set pba to first block in zone lba is in */
pba = (lba / 1000) * 1024;
- US_DEBUGP("No PBA for LBA %04X\n",lba);
+ usb_stor_dbg(us, "No PBA for LBA %04X\n", lba);
if (max_pba > 1024)
max_pba = 1024;
if (pba == -1) {
/* oh dear */
- US_DEBUGP("Couldn't find unallocated block\n");
+ usb_stor_dbg(us, "Couldn't find unallocated block\n");
set_sense_info (3, 0x31, 0); /* medium error */
result = USB_STOR_TRANSPORT_FAILED;
goto leave;
}
- US_DEBUGP("Allocating PBA %04X for LBA %04X\n", pba, lba);
+ usb_stor_dbg(us, "Allocating PBA %04X for LBA %04X\n",
+ pba, lba);
/* set writing to unallocated block flag */
command[4] = 0x40;
DMA_TO_DEVICE, command, 8);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Result for send_command in write_data %d\n",
- result);
+ usb_stor_dbg(us, "Result for send_command in write_data %d\n",
+ result);
/* set_sense_info is superfluous here? */
set_sense_info (3, 0x3, 0);/* peripheral write error */
DMA_TO_DEVICE, buffer, len);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Result for send_data in write_data %d\n",
- result);
+ usb_stor_dbg(us, "Result for send_data in write_data %d\n",
+ result);
/* set_sense_info is superfluous here? */
set_sense_info (3, 0x3, 0);/* peripheral write error */
result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, status, 6);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Result for get_status in write_data %d\n",
- result);
+ usb_stor_dbg(us, "Result for get_status in write_data %d\n",
+ result);
/* set_sense_info is superfluous here? */
set_sense_info (3, 0x3, 0);/* peripheral write error */
goto leave;
}
- US_DEBUGP("Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n",
- lba, pba, new_pba);
+ usb_stor_dbg(us, "Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n",
+ lba, pba, new_pba);
/* update the lba<->pba maps, note new_pba might be the same as pba */
info->lba_to_pba[lba] = new_pba;
command[7] = 0x84;
result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8);
- US_DEBUGP("Result of send_control for device ID is %d\n",
- result);
+ usb_stor_dbg(us, "Result of send_control for device ID is %d\n",
+ result);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
int result;
struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
- US_DEBUGP("Reading capacity...\n");
+ usb_stor_dbg(us, "Reading capacity...\n");
result = sddr55_read_deviceID(us,
&manufacturerID,
&deviceID);
- US_DEBUGP("Result of read_deviceID is %d\n",
- result);
+ usb_stor_dbg(us, "Result of read_deviceID is %d\n", result);
if (result != USB_STOR_XFER_GOOD)
return 0;
- US_DEBUGP("Device ID = %02X\n", deviceID);
- US_DEBUGP("Manuf ID = %02X\n", manufacturerID);
+ usb_stor_dbg(us, "Device ID = %02X\n", deviceID);
+ usb_stor_dbg(us, "Manuf ID = %02X\n", manufacturerID);
info->pageshift = 9;
info->smallpageshift = 0;
}
if (lba<0x10 || (lba>=0x3E0 && lba<0x3EF))
- US_DEBUGP("LBA %04X <-> PBA %04X\n", lba, i);
+ usb_stor_dbg(us, "LBA %04X <-> PBA %04X\n", lba, i);
info->lba_to_pba[lba + zone * 1000] = i;
}
info = (struct sddr55_card_info *)(us->extra);
if (srb->cmnd[0] == REQUEST_SENSE) {
- US_DEBUGP("SDDR55: request sense %02x/%02x/%02x\n", info->sense_data[2], info->sense_data[12], info->sense_data[13]);
+ usb_stor_dbg(us, "request sense %02x/%02x/%02x\n",
+ info->sense_data[2],
+ info->sense_data[12],
+ info->sense_data[13]);
memcpy (ptr, info->sense_data, sizeof info->sense_data);
ptr[0] = 0x70;
usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb);
if ( (srb->cmnd[2] & 0x3F) == 0x01 ) {
- US_DEBUGP(
- "SDDR55: Dummy up request for mode page 1\n");
+ usb_stor_dbg(us, "Dummy up request for mode page 1\n");
return USB_STOR_TRANSPORT_GOOD;
} else if ( (srb->cmnd[2] & 0x3F) == 0x3F ) {
- US_DEBUGP(
- "SDDR55: Dummy up request for all mode pages\n");
+ usb_stor_dbg(us, "Dummy up request for all mode pages\n");
return USB_STOR_TRANSPORT_GOOD;
}
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
- US_DEBUGP(
- "SDDR55: %s medium removal. Not that I can do"
- " anything about it...\n",
- (srb->cmnd[4]&0x03) ? "Prevent" : "Allow");
+ usb_stor_dbg(us, "%s medium removal. Not that I can do anything about it...\n",
+ (srb->cmnd[4]&0x03) ? "Prevent" : "Allow");
return USB_STOR_TRANSPORT_GOOD;
if (lba >= info->max_log_blks) {
- US_DEBUGP("Error: Requested LBA %04X exceeds maximum "
- "block %04X\n", lba, info->max_log_blks-1);
+ usb_stor_dbg(us, "Error: Requested LBA %04X exceeds maximum block %04X\n",
+ lba, info->max_log_blks - 1);
set_sense_info (5, 0x24, 0); /* invalid field in command */
pba = info->lba_to_pba[lba];
if (srb->cmnd[0] == WRITE_10) {
- US_DEBUGP("WRITE_10: write block %04X (LBA %04X) page %01X"
- " pages %d\n",
- pba, lba, page, pages);
+ usb_stor_dbg(us, "WRITE_10: write block %04X (LBA %04X) page %01X pages %d\n",
+ pba, lba, page, pages);
return sddr55_write_data(us, lba, page, pages);
} else {
- US_DEBUGP("READ_10: read block %04X (LBA %04X) page %01X"
- " pages %d\n",
- pba, lba, page, pages);
+ usb_stor_dbg(us, "READ_10: read block %04X (LBA %04X) page %01X pages %d\n",
+ pba, lba, page, pages);
return sddr55_read_data(us, lba, page, pages);
}
if (len == 0)
return USB_STOR_XFER_GOOD;
- US_DEBUGP("usbat_bulk_read: len = %d\n", len);
+ usb_stor_dbg(us, "len = %d\n", len);
return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL);
}
if (len == 0)
return USB_STOR_XFER_GOOD;
- US_DEBUGP("usbat_bulk_write: len = %d\n", len);
+ usb_stor_dbg(us, "len = %d\n", len);
return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL);
}
int rc;
rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status);
- US_DEBUGP("usbat_get_status: 0x%02X\n", (unsigned short) (*status));
+ usb_stor_dbg(us, "0x%02X\n", *status);
return rc;
}
return USB_STOR_TRANSPORT_FAILED;
if ((*status & 0x80)==0x00) { /* not busy */
- US_DEBUGP("Waited not busy for %d steps\n", i);
+ usb_stor_dbg(us, "Waited not busy for %d steps\n", i);
return USB_STOR_TRANSPORT_GOOD;
}
msleep(1000); /* X minutes */
}
- US_DEBUGP("Waited not busy for %d minutes, timing out.\n",
- minutes);
+ usb_stor_dbg(us, "Waited not busy for %d minutes, timing out\n",
+ minutes);
return USB_STOR_TRANSPORT_FAILED;
}
if (*status & 0x20) /* device fault */
return USB_STOR_TRANSPORT_FAILED;
- US_DEBUGP("Redoing %s\n",
- direction==DMA_TO_DEVICE ? "write" : "read");
+ usb_stor_dbg(us, "Redoing %s\n",
+ direction == DMA_TO_DEVICE
+ ? "write" : "read");
} else if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
}
- US_DEBUGP("Bummer! %s bulk data 20 times failed.\n",
- direction==DMA_TO_DEVICE ? "Writing" : "Reading");
+ usb_stor_dbg(us, "Bummer! %s bulk data 20 times failed\n",
+ direction == DMA_TO_DEVICE ? "Writing" : "Reading");
return USB_STOR_TRANSPORT_FAILED;
}
data_flags,
USBAT_UIO_READ);
- US_DEBUGP("usbat_read_user_io: UIO register reads %02X\n", (unsigned short) (*data_flags));
+ usb_stor_dbg(us, "UIO register reads %02X\n", *data_flags);
return result;
}
/*
* Determine if media is present.
*/
-static int usbat_flash_check_media_present(unsigned char *uio)
+static int usbat_flash_check_media_present(struct us_data *us,
+ unsigned char *uio)
{
if (*uio & USBAT_UIO_UI0) {
- US_DEBUGP("usbat_flash_check_media_present: no media detected\n");
+ usb_stor_dbg(us, "no media detected\n");
return USBAT_FLASH_MEDIA_NONE;
}
/*
* Determine if media has changed since last operation
*/
-static int usbat_flash_check_media_changed(unsigned char *uio)
+static int usbat_flash_check_media_changed(struct us_data *us,
+ unsigned char *uio)
{
if (*uio & USBAT_UIO_0) {
- US_DEBUGP("usbat_flash_check_media_changed: media change detected\n");
+ usb_stor_dbg(us, "media change detected\n");
return USBAT_FLASH_MEDIA_CHANGED;
}
return USB_STOR_TRANSPORT_ERROR;
/* Check for media existence */
- rc = usbat_flash_check_media_present(uio);
+ rc = usbat_flash_check_media_present(us, uio);
if (rc == USBAT_FLASH_MEDIA_NONE) {
info->sense_key = 0x02;
info->sense_asc = 0x3A;
}
/* Check for media change */
- rc = usbat_flash_check_media_changed(uio);
+ rc = usbat_flash_check_media_changed(us, uio);
if (rc == USBAT_FLASH_MEDIA_CHANGED) {
/* Reset and re-enable card detect */
/* Check for error bit, or if the command 'fell through' */
if (status == 0xA1 || !(status & 0x01)) {
/* Device is HP 8200 */
- US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n");
+ usb_stor_dbg(us, "Detected HP8200 CDRW\n");
info->devicetype = USBAT_DEV_HP8200;
} else {
/* Device is a CompactFlash reader/writer */
- US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
+ usb_stor_dbg(us, "Detected Flash reader/writer\n");
info->devicetype = USBAT_DEV_FLASH;
}
/* ATA command : IDENTIFY DEVICE */
rc = usbat_multiple_write(us, registers, command, 3);
if (rc != USB_STOR_XFER_GOOD) {
- US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n");
+ usb_stor_dbg(us, "Gah! identify_device failed\n");
rc = USB_STOR_TRANSPORT_ERROR;
goto leave;
}
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
- US_DEBUGP("usbat_flash_read_data: %d bytes\n", len);
+ usb_stor_dbg(us, "%d bytes\n", len);
/* Store the data in the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, us->srb,
unsigned int sg_offset = 0;
struct scatterlist *sg = NULL;
- US_DEBUGP("handle_read10: transfersize %d\n",
- srb->transfersize);
+ usb_stor_dbg(us, "transfersize %d\n", srb->transfersize);
if (scsi_bufflen(srb) < 0x10000) {
len = short_pack(data[7+9], data[7+8]);
len <<= 16;
len |= data[7+7];
- US_DEBUGP("handle_read10: GPCMD_READ_CD: len %d\n", len);
+ usb_stor_dbg(us, "GPCMD_READ_CD: len %d\n", len);
srb->transfersize = scsi_bufflen(srb)/len;
}
if (!srb->transfersize) {
srb->transfersize = 2048; /* A guess */
- US_DEBUGP("handle_read10: transfersize 0, forcing %d\n",
- srb->transfersize);
+ usb_stor_dbg(us, "transfersize 0, forcing %d\n",
+ srb->transfersize);
}
/*
*/
len = (65535/srb->transfersize) * srb->transfersize;
- US_DEBUGP("Max read is %d bytes\n", len);
+ usb_stor_dbg(us, "Max read is %d bytes\n", len);
len = min(len, scsi_bufflen(srb));
buffer = kmalloc(len, GFP_NOIO);
if (buffer == NULL) /* bloody hell! */
unsigned char *status = us->iobuf;
us->extra = kzalloc(sizeof(struct usbat_info), GFP_NOIO);
- if (!us->extra) {
- US_DEBUGP("init_usbat: Gah! Can't allocate storage for usbat info struct!\n");
+ if (!us->extra)
return 1;
- }
+
info = (struct usbat_info *) (us->extra);
/* Enable peripheral control signals */
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 1\n");
+ usb_stor_dbg(us, "INIT 1\n");
msleep(2000);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 2\n");
+ usb_stor_dbg(us, "INIT 2\n");
rc = usbat_read_user_io(us, status);
if (rc != USB_STOR_XFER_GOOD)
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 3\n");
+ usb_stor_dbg(us, "INIT 3\n");
rc = usbat_select_and_test_registers(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 4\n");
+ usb_stor_dbg(us, "INIT 4\n");
rc = usbat_read_user_io(us, status);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 5\n");
+ usb_stor_dbg(us, "INIT 5\n");
/* Enable peripheral control signals and card detect */
rc = usbat_device_enable_cdt(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 6\n");
+ usb_stor_dbg(us, "INIT 6\n");
rc = usbat_read_user_io(us, status);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 7\n");
+ usb_stor_dbg(us, "INIT 7\n");
msleep(1400);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 8\n");
+ usb_stor_dbg(us, "INIT 8\n");
rc = usbat_select_and_test_registers(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 9\n");
+ usb_stor_dbg(us, "INIT 9\n");
/* At this point, we need to detect which device we are using */
if (usbat_set_transport(us, info, devicetype))
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 10\n");
+ usb_stor_dbg(us, "INIT 10\n");
if (usbat_get_device_type(us) == USBAT_DEV_FLASH) {
subcountH = 0x02;
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 11\n");
+ usb_stor_dbg(us, "INIT 11\n");
return USB_STOR_TRANSPORT_GOOD;
}
}
result = usbat_get_status(us, status);
- US_DEBUGP("Status = %02X\n", *status);
+ usb_stor_dbg(us, "Status = %02X\n", *status);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
if (srb->cmnd[0] == TEST_UNIT_READY)
if (result == USB_STOR_TRANSPORT_GOOD) {
transferred += len;
- US_DEBUGP("Wrote %08X bytes\n", transferred);
+ usb_stor_dbg(us, "Wrote %08X bytes\n", transferred);
}
return result;
}
if (len > 0xFFFF) {
- US_DEBUGP("Error: len = %08X... what do I do now?\n",
- len);
+ usb_stor_dbg(us, "Error: len = %08X... what do I do now?\n",
+ len);
return USB_STOR_TRANSPORT_ERROR;
}
};
if (srb->cmnd[0] == INQUIRY) {
- US_DEBUGP("usbat_flash_transport: INQUIRY. Returning bogus response.\n");
+ usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
memcpy(ptr, inquiry_response, sizeof(inquiry_response));
fill_inquiry_response(us, ptr, 36);
return USB_STOR_TRANSPORT_GOOD;
/* hard coded 512 byte sectors as per ATA spec */
info->ssize = 0x200;
- US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
- info->sectors, info->ssize);
+ usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
+ info->sectors, info->ssize);
/*
* build the reply
}
if (srb->cmnd[0] == MODE_SELECT_10) {
- US_DEBUGP("usbat_flash_transport: Gah! MODE_SELECT_10.\n");
+ usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
return USB_STOR_TRANSPORT_ERROR;
}
blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
- US_DEBUGP("usbat_flash_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks);
+ usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n",
+ block, blocks);
return usbat_flash_read_data(us, info, block, blocks);
}
blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
- US_DEBUGP("usbat_flash_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks);
+ usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n",
+ block, blocks);
return usbat_flash_read_data(us, info, block, blocks);
}
blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
- US_DEBUGP("usbat_flash_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks);
+ usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n",
+ block, blocks);
return usbat_flash_write_data(us, info, block, blocks);
}
blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
- US_DEBUGP("usbat_flash_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks);
+ usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n",
+ block, blocks);
return usbat_flash_write_data(us, info, block, blocks);
}
if (srb->cmnd[0] == TEST_UNIT_READY) {
- US_DEBUGP("usbat_flash_transport: TEST_UNIT_READY.\n");
+ usb_stor_dbg(us, "TEST_UNIT_READY\n");
rc = usbat_flash_check_media(us, info);
if (rc != USB_STOR_TRANSPORT_GOOD)
}
if (srb->cmnd[0] == REQUEST_SENSE) {
- US_DEBUGP("usbat_flash_transport: REQUEST_SENSE.\n");
+ usb_stor_dbg(us, "REQUEST_SENSE\n");
memset(ptr, 0, 18);
ptr[0] = 0xF0;
return USB_STOR_TRANSPORT_GOOD;
}
- US_DEBUGP("usbat_flash_transport: Gah! Unknown command: %d (0x%x)\n",
- srb->cmnd[0], srb->cmnd[0]);
+ usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+ srb->cmnd[0], srb->cmnd[0]);
info->sense_key = 0x05;
info->sense_asc = 0x20;
info->sense_ascq = 0x00;
static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
{
int result;
- US_DEBUGP("SWIMS: %s", "DEVICE MODE SWITCH\n");
+ dev_dbg(&udev->dev, "SWIMS: %s", "DEVICE MODE SWITCH\n");
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
SWIMS_USB_REQUEST_SetSwocMode, /* __u8 request */
USB_TYPE_VENDOR | USB_DIR_OUT, /* __u8 request type */
{
int result;
- US_DEBUGP("SWIMS: Attempting to get TRU-Install info.\n");
+ dev_dbg(&udev->dev, "SWIMS: Attempting to get TRU-Install info\n");
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
SWIMS_USB_REQUEST_GetSwocInfo, /* __u8 request */
return result;
}
-static void debug_swoc(struct swoc_info *swocInfo)
+static void debug_swoc(const struct device *dev, struct swoc_info *swocInfo)
{
- US_DEBUGP("SWIMS: SWoC Rev: %02d \n", swocInfo->rev);
- US_DEBUGP("SWIMS: Linux SKU: %04X \n", swocInfo->LinuxSKU);
- US_DEBUGP("SWIMS: Linux Version: %04X \n", swocInfo->LinuxVer);
+ dev_dbg(dev, "SWIMS: SWoC Rev: %02d\n", swocInfo->rev);
+ dev_dbg(dev, "SWIMS: Linux SKU: %04X\n", swocInfo->LinuxSKU);
+ dev_dbg(dev, "SWIMS: Linux Version: %04X\n", swocInfo->LinuxVer);
}
} else {
swocInfo = kmalloc(sizeof(struct swoc_info), GFP_KERNEL);
if (!swocInfo) {
- US_DEBUGP("SWIMS: Allocation failure\n");
snprintf(buf, PAGE_SIZE, "Error\n");
return -ENOMEM;
}
result = sierra_get_swoc_info(udev, swocInfo);
if (result < 0) {
- US_DEBUGP("SWIMS: failed SWoC query\n");
+ dev_dbg(dev, "SWIMS: failed SWoC query\n");
kfree(swocInfo);
snprintf(buf, PAGE_SIZE, "Error\n");
return -EIO;
}
- debug_swoc(swocInfo);
+ debug_swoc(dev, swocInfo);
result = snprintf(buf, PAGE_SIZE,
"REV=%02d SKU=%04X VER=%04X\n",
swocInfo->rev,
sh = us_to_host(us);
scsi_get_host_dev(sh);
- US_DEBUGP("SWIMS: sierra_ms_init called\n");
-
/* Force Modem mode */
if (swi_tru_install == TRU_FORCE_MODEM) {
- US_DEBUGP("SWIMS: %s", "Forcing Modem Mode\n");
+ usb_stor_dbg(us, "SWIMS: Forcing Modem Mode\n");
result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
if (result < 0)
- US_DEBUGP("SWIMS: Failed to switch to modem mode.\n");
+ usb_stor_dbg(us, "SWIMS: Failed to switch to modem mode\n");
return -EIO;
}
/* Force Mass Storage mode (keep CD-Rom) */
else if (swi_tru_install == TRU_FORCE_MS) {
- US_DEBUGP("SWIMS: %s", "Forcing Mass Storage Mode\n");
+ usb_stor_dbg(us, "SWIMS: Forcing Mass Storage Mode\n");
goto complete;
}
/* Normal TRU-Install Logic */
else {
- US_DEBUGP("SWIMS: %s", "Normal SWoC Logic\n");
+ usb_stor_dbg(us, "SWIMS: Normal SWoC Logic\n");
swocInfo = kmalloc(sizeof(struct swoc_info),
GFP_KERNEL);
- if (!swocInfo) {
- US_DEBUGP("SWIMS: %s", "Allocation failure\n");
+ if (!swocInfo)
return -ENOMEM;
- }
retries = 3;
do {
retries--;
result = sierra_get_swoc_info(udev, swocInfo);
if (result < 0) {
- US_DEBUGP("SWIMS: %s", "Failed SWoC query\n");
+ usb_stor_dbg(us, "SWIMS: Failed SWoC query\n");
schedule_timeout_uninterruptible(2*HZ);
}
} while (retries && result < 0);
if (result < 0) {
- US_DEBUGP("SWIMS: %s",
- "Completely failed SWoC query\n");
+ usb_stor_dbg(us, "SWIMS: Completely failed SWoC query\n");
kfree(swocInfo);
return -EIO;
}
- debug_swoc(swocInfo);
+ debug_swoc(&us->pusb_dev->dev, swocInfo);
/* If there is not Linux software on the TRU-Install device
* then switch to modem mode
*/
if (!containsFullLinuxPackage(swocInfo)) {
- US_DEBUGP("SWIMS: %s",
- "Switching to Modem Mode\n");
+ usb_stor_dbg(us, "SWIMS: Switching to Modem Mode\n");
result = sierra_set_ms_mode(udev,
SWIMS_SET_MODE_Modem);
if (result < 0)
- US_DEBUGP("SWIMS: Failed to switch modem\n");
+ usb_stor_dbg(us, "SWIMS: Failed to switch modem\n");
kfree(swocInfo);
return -EIO;
}
/* cancel the URB, if it hasn't been cancelled already */
if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) {
- US_DEBUGP("-- cancelling URB\n");
+ usb_stor_dbg(us, "-- cancelling URB\n");
usb_unlink_urb(us->current_urb);
}
}
clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags);
if (timeleft <= 0) {
- US_DEBUGP("%s -- cancelling URB\n",
- timeleft == 0 ? "Timeout" : "Signal");
+ usb_stor_dbg(us, "%s -- cancelling URB\n",
+ timeleft == 0 ? "Timeout" : "Signal");
usb_kill_urb(us->current_urb);
}
{
int status;
- US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n",
- __func__, request, requesttype,
- value, index, size);
+ usb_stor_dbg(us, "rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n",
+ request, requesttype, value, index, size);
/* fill in the devrequest structure */
us->cr->bRequestType = requesttype;
if (result >= 0)
usb_reset_endpoint(us->pusb_dev, endp);
- US_DEBUGP("%s: result = %d\n", __func__, result);
+ usb_stor_dbg(us, "result = %d\n", result);
return result;
}
EXPORT_SYMBOL_GPL(usb_stor_clear_halt);
static int interpret_urb_result(struct us_data *us, unsigned int pipe,
unsigned int length, int result, unsigned int partial)
{
- US_DEBUGP("Status code %d; transferred %u/%u\n",
- result, partial, length);
+ usb_stor_dbg(us, "Status code %d; transferred %u/%u\n",
+ result, partial, length);
switch (result) {
/* no error code; did we send all the data? */
case 0:
if (partial != length) {
- US_DEBUGP("-- short transfer\n");
+ usb_stor_dbg(us, "-- short transfer\n");
return USB_STOR_XFER_SHORT;
}
- US_DEBUGP("-- transfer complete\n");
+ usb_stor_dbg(us, "-- transfer complete\n");
return USB_STOR_XFER_GOOD;
/* stalled */
/* for control endpoints, (used by CB[I]) a stall indicates
* a failed command */
if (usb_pipecontrol(pipe)) {
- US_DEBUGP("-- stall on control pipe\n");
+ usb_stor_dbg(us, "-- stall on control pipe\n");
return USB_STOR_XFER_STALLED;
}
/* for other sorts of endpoint, clear the stall */
- US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe);
+ usb_stor_dbg(us, "clearing endpoint halt for pipe 0x%x\n",
+ pipe);
if (usb_stor_clear_halt(us, pipe) < 0)
return USB_STOR_XFER_ERROR;
return USB_STOR_XFER_STALLED;
/* babble - the device tried to send more than we wanted to read */
case -EOVERFLOW:
- US_DEBUGP("-- babble\n");
+ usb_stor_dbg(us, "-- babble\n");
return USB_STOR_XFER_LONG;
/* the transfer was cancelled by abort, disconnect, or timeout */
case -ECONNRESET:
- US_DEBUGP("-- transfer cancelled\n");
+ usb_stor_dbg(us, "-- transfer cancelled\n");
return USB_STOR_XFER_ERROR;
/* short scatter-gather read transfer */
case -EREMOTEIO:
- US_DEBUGP("-- short read transfer\n");
+ usb_stor_dbg(us, "-- short read transfer\n");
return USB_STOR_XFER_SHORT;
/* abort or disconnect in progress */
case -EIO:
- US_DEBUGP("-- abort or disconnect in progress\n");
+ usb_stor_dbg(us, "-- abort or disconnect in progress\n");
return USB_STOR_XFER_ERROR;
/* the catch-all error case */
default:
- US_DEBUGP("-- unknown error\n");
+ usb_stor_dbg(us, "-- unknown error\n");
return USB_STOR_XFER_ERROR;
}
}
{
int result;
- US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n",
- __func__, request, requesttype,
- value, index, size);
+ usb_stor_dbg(us, "rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n",
+ request, requesttype, value, index, size);
/* fill in the devrequest structure */
us->cr->bRequestType = requesttype;
unsigned int pipe = us->recv_intr_pipe;
unsigned int maxp;
- US_DEBUGP("%s: xfer %u bytes\n", __func__, length);
+ usb_stor_dbg(us, "xfer %u bytes\n", length);
/* calculate the max packet size */
maxp = usb_maxpacket(us->pusb_dev, pipe, usb_pipeout(pipe));
{
int result;
- US_DEBUGP("%s: xfer %u bytes\n", __func__, length);
+ usb_stor_dbg(us, "xfer %u bytes\n", length);
/* fill and submit the URB */
usb_fill_bulk_urb(us->current_urb, us->pusb_dev, pipe, buf, length,
return USB_STOR_XFER_ERROR;
/* initialize the scatter-gather request block */
- US_DEBUGP("%s: xfer %u bytes, %d entries\n", __func__,
- length, num_sg);
+ usb_stor_dbg(us, "xfer %u bytes, %d entries\n", length, num_sg);
result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0,
sg, num_sg, length, GFP_NOIO);
if (result) {
- US_DEBUGP("usb_sg_init returned %d\n", result);
+ usb_stor_dbg(us, "usb_sg_init returned %d\n", result);
return USB_STOR_XFER_ERROR;
}
/* cancel the request, if it hasn't been cancelled already */
if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) {
- US_DEBUGP("-- cancelling sg request\n");
+ usb_stor_dbg(us, "-- cancelling sg request\n");
usb_sg_cancel(&us->current_sg);
}
}
* short-circuit all other processing
*/
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
- US_DEBUGP("-- command was aborted\n");
+ usb_stor_dbg(us, "-- command was aborted\n");
srb->result = DID_ABORT << 16;
goto Handle_Errors;
}
/* if there is a transport error, reset and don't auto-sense */
if (result == USB_STOR_TRANSPORT_ERROR) {
- US_DEBUGP("-- transport indicates error, resetting\n");
+ usb_stor_dbg(us, "-- transport indicates error, resetting\n");
srb->result = DID_ERROR << 16;
goto Handle_Errors;
}
*/
if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_DPCM_USB) &&
srb->sc_data_direction != DMA_FROM_DEVICE) {
- US_DEBUGP("-- CB transport device requiring auto-sense\n");
+ usb_stor_dbg(us, "-- CB transport device requiring auto-sense\n");
need_auto_sense = 1;
}
* "failure" and an "error" in the transport mechanism.
*/
if (result == USB_STOR_TRANSPORT_FAILED) {
- US_DEBUGP("-- transport indicates command failure\n");
+ usb_stor_dbg(us, "-- transport indicates command failure\n");
need_auto_sense = 1;
}
!(us->fflags & US_FL_SANE_SENSE) &&
!(us->fflags & US_FL_BAD_SENSE) &&
!(srb->cmnd[2] & 0x20))) {
- US_DEBUGP("-- SAT supported, increasing auto-sense\n");
+ usb_stor_dbg(us, "-- SAT supported, increasing auto-sense\n");
us->fflags |= US_FL_SANE_SENSE;
}
(srb->cmnd[0] == MODE_SENSE) ||
(srb->cmnd[0] == LOG_SENSE) ||
(srb->cmnd[0] == MODE_SENSE_10))) {
- US_DEBUGP("-- unexpectedly short transfer\n");
+ usb_stor_dbg(us, "-- unexpectedly short transfer\n");
}
/* Now, if we need to do the auto-sense, let's do it */
if (us->fflags & US_FL_SANE_SENSE)
sense_size = ~0;
Retry_Sense:
- US_DEBUGP("Issuing auto-REQUEST_SENSE\n");
+ usb_stor_dbg(us, "Issuing auto-REQUEST_SENSE\n");
scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size);
scsi_eh_restore_cmnd(srb, &ses);
if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
- US_DEBUGP("-- auto-sense aborted\n");
+ usb_stor_dbg(us, "-- auto-sense aborted\n");
srb->result = DID_ABORT << 16;
/* If SANE_SENSE caused this problem, disable it */
*/
if (temp_result == USB_STOR_TRANSPORT_FAILED &&
sense_size != US_SENSE_SIZE) {
- US_DEBUGP("-- auto-sense failure, retry small sense\n");
+ usb_stor_dbg(us, "-- auto-sense failure, retry small sense\n");
sense_size = US_SENSE_SIZE;
us->fflags &= ~US_FL_SANE_SENSE;
us->fflags |= US_FL_BAD_SENSE;
/* Other failures */
if (temp_result != USB_STOR_TRANSPORT_GOOD) {
- US_DEBUGP("-- auto-sense failure\n");
+ usb_stor_dbg(us, "-- auto-sense failure\n");
/* we skip the reset if this happens to be a
* multi-target device, since failure of an
!(us->fflags & US_FL_SANE_SENSE) &&
!(us->fflags & US_FL_BAD_SENSE) &&
(srb->sense_buffer[0] & 0x7C) == 0x70) {
- US_DEBUGP("-- SANE_SENSE support enabled\n");
+ usb_stor_dbg(us, "-- SANE_SENSE support enabled\n");
us->fflags |= US_FL_SANE_SENSE;
/* Indicate to the user that we truncated their sense
* because we didn't know it supported larger sense.
*/
- US_DEBUGP("-- Sense data truncated to %i from %i\n",
- US_SENSE_SIZE,
- srb->sense_buffer[7] + 8);
+ usb_stor_dbg(us, "-- Sense data truncated to %i from %i\n",
+ US_SENSE_SIZE,
+ srb->sense_buffer[7] + 8);
srb->sense_buffer[7] = (US_SENSE_SIZE - 8);
}
scsi_normalize_sense(srb->sense_buffer, SCSI_SENSE_BUFFERSIZE,
&sshdr);
- US_DEBUGP("-- Result from auto-sense is %d\n", temp_result);
- US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n",
- sshdr.response_code, sshdr.sense_key,
- sshdr.asc, sshdr.ascq);
+ usb_stor_dbg(us, "-- Result from auto-sense is %d\n",
+ temp_result);
+ usb_stor_dbg(us, "-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n",
+ sshdr.response_code, sshdr.sense_key,
+ sshdr.asc, sshdr.ascq);
#ifdef CONFIG_USB_STORAGE_DEBUG
- usb_stor_show_sense(sshdr.sense_key, sshdr.asc, sshdr.ascq);
+ usb_stor_show_sense(us, sshdr.sense_key, sshdr.asc, sshdr.ascq);
#endif
/* set the result so the higher layers expect this data */
/* Stop the current URB transfer */
void usb_stor_stop_transport(struct us_data *us)
{
- US_DEBUGP("%s called\n", __func__);
-
/* If the state machine is blocked waiting for an URB,
* let's wake it up. The test_and_clear_bit() call
* guarantees that if a URB has just been submitted,
* it won't be cancelled more than once. */
if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) {
- US_DEBUGP("-- cancelling URB\n");
+ usb_stor_dbg(us, "-- cancelling URB\n");
usb_unlink_urb(us->current_urb);
}
/* If we are waiting for a scatter-gather operation, cancel it. */
if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) {
- US_DEBUGP("-- cancelling sg request\n");
+ usb_stor_dbg(us, "-- cancelling sg request\n");
usb_sg_cancel(&us->current_sg);
}
}
us->ifnum, srb->cmnd, srb->cmd_len);
/* check the return code for the command */
- US_DEBUGP("Call to usb_stor_ctrl_transfer() returned %d\n", result);
+ usb_stor_dbg(us, "Call to usb_stor_ctrl_transfer() returned %d\n",
+ result);
/* if we stalled the command, it means command failed */
if (result == USB_STOR_XFER_STALLED) {
pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
us->recv_bulk_pipe : us->send_bulk_pipe;
result = usb_stor_bulk_srb(us, pipe, srb);
- US_DEBUGP("CBI data stage result is 0x%x\n", result);
+ usb_stor_dbg(us, "CBI data stage result is 0x%x\n", result);
/* if we stalled the data transfer it means command failed */
if (result == USB_STOR_XFER_STALLED)
return USB_STOR_TRANSPORT_GOOD;
result = usb_stor_intr_transfer(us, us->iobuf, 2);
- US_DEBUGP("Got interrupt data (0x%x, 0x%x)\n",
- us->iobuf[0], us->iobuf[1]);
+ usb_stor_dbg(us, "Got interrupt data (0x%x, 0x%x)\n",
+ us->iobuf[0], us->iobuf[1]);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
* into the first byte -- so if it's non-zero, call it a failure.
*/
if (us->iobuf[0]) {
- US_DEBUGP("CBI IRQ data showed reserved bType 0x%x\n",
- us->iobuf[0]);
+ usb_stor_dbg(us, "CBI IRQ data showed reserved bType 0x%x\n",
+ us->iobuf[0]);
goto Failed;
}
USB_RECIP_INTERFACE,
0, us->ifnum, us->iobuf, 1, 10*HZ);
- US_DEBUGP("GetMaxLUN command result is %d, data is %d\n",
- result, us->iobuf[0]);
+ usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n",
+ result, us->iobuf[0]);
/* if we have a successful request, return the result */
if (result > 0)
memcpy(bcb->CDB, srb->cmnd, bcb->Length);
/* send it to out endpoint */
- US_DEBUGP("Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n",
- le32_to_cpu(bcb->Signature), bcb->Tag,
- le32_to_cpu(bcb->DataTransferLength), bcb->Flags,
- (bcb->Lun >> 4), (bcb->Lun & 0x0F),
- bcb->Length);
+ usb_stor_dbg(us, "Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n",
+ le32_to_cpu(bcb->Signature), bcb->Tag,
+ le32_to_cpu(bcb->DataTransferLength), bcb->Flags,
+ (bcb->Lun >> 4), (bcb->Lun & 0x0F),
+ bcb->Length);
result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
bcb, cbwlen, NULL);
- US_DEBUGP("Bulk command transfer result=%d\n", result);
+ usb_stor_dbg(us, "Bulk command transfer result=%d\n", result);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
us->recv_bulk_pipe : us->send_bulk_pipe;
result = usb_stor_bulk_srb(us, pipe, srb);
- US_DEBUGP("Bulk data transfer result 0x%x\n", result);
+ usb_stor_dbg(us, "Bulk data transfer result 0x%x\n", result);
if (result == USB_STOR_XFER_ERROR)
return USB_STOR_TRANSPORT_ERROR;
*/
/* get CSW for device status */
- US_DEBUGP("Attempting to get CSW...\n");
+ usb_stor_dbg(us, "Attempting to get CSW...\n");
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
bcs, US_BULK_CS_WRAP_LEN, &cswlen);
* CSWs. If we encounter such a thing, try to read the CSW again.
*/
if (result == USB_STOR_XFER_SHORT && cswlen == 0) {
- US_DEBUGP("Received 0-length CSW; retrying...\n");
+ usb_stor_dbg(us, "Received 0-length CSW; retrying...\n");
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
bcs, US_BULK_CS_WRAP_LEN, &cswlen);
}
if (result == USB_STOR_XFER_STALLED) {
/* get the status again */
- US_DEBUGP("Attempting to get CSW (2nd try)...\n");
+ usb_stor_dbg(us, "Attempting to get CSW (2nd try)...\n");
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
bcs, US_BULK_CS_WRAP_LEN, NULL);
}
/* if we still have a failure at this point, we're in trouble */
- US_DEBUGP("Bulk status result = %d\n", result);
+ usb_stor_dbg(us, "Bulk status result = %d\n", result);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
/* check bulk status */
residue = le32_to_cpu(bcs->Residue);
- US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
- le32_to_cpu(bcs->Signature), bcs->Tag,
- residue, bcs->Status);
+ usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
+ le32_to_cpu(bcs->Signature), bcs->Tag,
+ residue, bcs->Status);
if (!(bcs->Tag == us->tag || (us->fflags & US_FL_BULK_IGNORE_TAG)) ||
bcs->Status > US_BULK_STAT_PHASE) {
- US_DEBUGP("Bulk logical error\n");
+ usb_stor_dbg(us, "Bulk logical error\n");
return USB_STOR_TRANSPORT_ERROR;
}
if (!us->bcs_signature) {
us->bcs_signature = bcs->Signature;
if (us->bcs_signature != cpu_to_le32(US_BULK_CS_SIGN))
- US_DEBUGP("Learnt BCS signature 0x%08X\n",
- le32_to_cpu(us->bcs_signature));
+ usb_stor_dbg(us, "Learnt BCS signature 0x%08X\n",
+ le32_to_cpu(us->bcs_signature));
} else if (bcs->Signature != us->bcs_signature) {
- US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n",
- le32_to_cpu(bcs->Signature),
- le32_to_cpu(us->bcs_signature));
+ usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n",
+ le32_to_cpu(bcs->Signature),
+ le32_to_cpu(us->bcs_signature));
return USB_STOR_TRANSPORT_ERROR;
}
int result2;
if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
- US_DEBUGP("No reset during disconnect\n");
+ usb_stor_dbg(us, "No reset during disconnect\n");
return -EIO;
}
request, requesttype, value, index, data, size,
5*HZ);
if (result < 0) {
- US_DEBUGP("Soft reset failed: %d\n", result);
+ usb_stor_dbg(us, "Soft reset failed: %d\n", result);
return result;
}
test_bit(US_FLIDX_DISCONNECTING, &us->dflags),
HZ*6);
if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
- US_DEBUGP("Reset interrupted by disconnect\n");
+ usb_stor_dbg(us, "Reset interrupted by disconnect\n");
return -EIO;
}
- US_DEBUGP("Soft reset: clearing bulk-in endpoint halt\n");
+ usb_stor_dbg(us, "Soft reset: clearing bulk-in endpoint halt\n");
result = usb_stor_clear_halt(us, us->recv_bulk_pipe);
- US_DEBUGP("Soft reset: clearing bulk-out endpoint halt\n");
+ usb_stor_dbg(us, "Soft reset: clearing bulk-out endpoint halt\n");
result2 = usb_stor_clear_halt(us, us->send_bulk_pipe);
/* return a result code based on the result of the clear-halts */
if (result >= 0)
result = result2;
if (result < 0)
- US_DEBUGP("Soft reset failed\n");
+ usb_stor_dbg(us, "Soft reset failed\n");
else
- US_DEBUGP("Soft reset done\n");
+ usb_stor_dbg(us, "Soft reset done\n");
return result;
}
int usb_stor_CB_reset(struct us_data *us)
{
- US_DEBUGP("%s called\n", __func__);
-
memset(us->iobuf, 0xFF, CB_RESET_CMD_SIZE);
us->iobuf[0] = SEND_DIAGNOSTIC;
us->iobuf[1] = 4;
*/
int usb_stor_Bulk_reset(struct us_data *us)
{
- US_DEBUGP("%s called\n", __func__);
-
return usb_stor_reset_common(us, US_BULK_RESET_REQUEST,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
0, us->ifnum, NULL, 0);
result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
if (result < 0)
- US_DEBUGP("unable to lock device for reset: %d\n", result);
+ usb_stor_dbg(us, "unable to lock device for reset: %d\n",
+ result);
else {
/* Were we disconnected while waiting for the lock? */
if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
result = -EIO;
- US_DEBUGP("No reset during disconnect\n");
+ usb_stor_dbg(us, "No reset during disconnect\n");
} else {
result = usb_reset_device(us->pusb_dev);
- US_DEBUGP("usb_reset_device returns %d\n",
- result);
+ usb_stor_dbg(us, "usb_reset_device returns %d\n",
+ result);
}
usb_unlock_device(us->pusb_dev);
}
/* Wait until no command is running */
mutex_lock(&us->dev_mutex);
- US_DEBUGP("%s\n", __func__);
if (us->suspend_resume_hook)
(us->suspend_resume_hook)(us, US_SUSPEND);
mutex_lock(&us->dev_mutex);
- US_DEBUGP("%s\n", __func__);
if (us->suspend_resume_hook)
(us->suspend_resume_hook)(us, US_RESUME);
{
struct us_data *us = usb_get_intfdata(iface);
- US_DEBUGP("%s\n", __func__);
-
/* Report the reset to the SCSI core */
usb_stor_report_bus_reset(us);
{
struct us_data *us = usb_get_intfdata(iface);
- US_DEBUGP("%s\n", __func__);
-
/* Make sure no command runs during the reset */
mutex_lock(&us->dev_mutex);
return 0;
{
struct us_data *us = usb_get_intfdata(iface);
- US_DEBUGP("%s\n", __func__);
-
/* Report the reset to the SCSI core */
usb_stor_report_bus_reset(us);
struct Scsi_Host *host = us_to_host(us);
for (;;) {
- US_DEBUGP("*** thread sleeping.\n");
+ usb_stor_dbg(us, "*** thread sleeping\n");
if (wait_for_completion_interruptible(&us->cmnd_ready))
break;
- US_DEBUGP("*** thread awakened.\n");
+ usb_stor_dbg(us, "*** thread awakened\n");
/* lock the device pointers */
mutex_lock(&(us->dev_mutex));
if (us->srb == NULL) {
scsi_unlock(host);
mutex_unlock(&us->dev_mutex);
- US_DEBUGP("-- exiting\n");
+ usb_stor_dbg(us, "-- exiting\n");
break;
}
* is UNKNOWN
*/
if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
- US_DEBUGP("UNKNOWN data direction\n");
+ usb_stor_dbg(us, "UNKNOWN data direction\n");
us->srb->result = DID_ERROR << 16;
}
*/
else if (us->srb->device->id &&
!(us->fflags & US_FL_SCM_MULT_TARG)) {
- US_DEBUGP("Bad target number (%d:%d)\n",
- us->srb->device->id, us->srb->device->lun);
+ usb_stor_dbg(us, "Bad target number (%d:%d)\n",
+ us->srb->device->id, us->srb->device->lun);
us->srb->result = DID_BAD_TARGET << 16;
}
else if (us->srb->device->lun > us->max_lun) {
- US_DEBUGP("Bad LUN (%d:%d)\n",
- us->srb->device->id, us->srb->device->lun);
+ usb_stor_dbg(us, "Bad LUN (%d:%d)\n",
+ us->srb->device->id, us->srb->device->lun);
us->srb->result = DID_BAD_TARGET << 16;
}
0x00, 0x80, 0x02, 0x02,
0x1F, 0x00, 0x00, 0x00};
- US_DEBUGP("Faking INQUIRY command\n");
+ usb_stor_dbg(us, "Faking INQUIRY command\n");
fill_inquiry_response(us, data_ptr, 36);
us->srb->result = SAM_STAT_GOOD;
}
/* we've got a command, let's do it! */
else {
- US_DEBUG(usb_stor_show_command(us->srb));
+ US_DEBUG(usb_stor_show_command(us, us->srb));
us->proto_handler(us->srb, us);
usb_mark_last_busy(us->pusb_dev);
}
/* indicate that the command is done */
if (us->srb->result != DID_ABORT << 16) {
- US_DEBUGP("scsi cmd done, result=0x%x\n",
- us->srb->result);
+ usb_stor_dbg(us, "scsi cmd done, result=0x%x\n",
+ us->srb->result);
us->srb->scsi_done(us->srb);
} else {
SkipForAbort:
- US_DEBUGP("scsi command aborted\n");
+ usb_stor_dbg(us, "scsi command aborted\n");
}
/* If an abort request was received we need to signal that
/* Associate our private data with the USB device */
static int associate_dev(struct us_data *us, struct usb_interface *intf)
{
- US_DEBUGP("-- %s\n", __func__);
-
/* Fill in the device-related fields */
us->pusb_dev = interface_to_usbdev(intf);
us->pusb_intf = intf;
us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
- US_DEBUGP("Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n",
- le16_to_cpu(us->pusb_dev->descriptor.idVendor),
- le16_to_cpu(us->pusb_dev->descriptor.idProduct),
- le16_to_cpu(us->pusb_dev->descriptor.bcdDevice));
- US_DEBUGP("Interface Subclass: 0x%02x, Protocol: 0x%02x\n",
- intf->cur_altsetting->desc.bInterfaceSubClass,
- intf->cur_altsetting->desc.bInterfaceProtocol);
+ usb_stor_dbg(us, "Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n",
+ le16_to_cpu(us->pusb_dev->descriptor.idVendor),
+ le16_to_cpu(us->pusb_dev->descriptor.idProduct),
+ le16_to_cpu(us->pusb_dev->descriptor.bcdDevice));
+ usb_stor_dbg(us, "Interface Subclass: 0x%02x, Protocol: 0x%02x\n",
+ intf->cur_altsetting->desc.bInterfaceSubClass,
+ intf->cur_altsetting->desc.bInterfaceProtocol);
/* Store our private data in the interface */
usb_set_intfdata(intf, us);
/* Allocate the control/setup and DMA-mapped buffers */
us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL);
- if (!us->cr) {
- US_DEBUGP("usb_ctrlrequest allocation failed\n");
+ if (!us->cr)
return -ENOMEM;
- }
us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE,
GFP_KERNEL, &us->iobuf_dma);
if (!us->iobuf) {
- US_DEBUGP("I/O buffer allocation failed\n");
+ usb_stor_dbg(us, "I/O buffer allocation failed\n");
return -ENOMEM;
}
return 0;
}
if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) {
- US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n");
+ usb_stor_dbg(us, "Endpoint sanity check failed! Rejecting dev.\n");
return -EIO;
}
us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!us->current_urb) {
- US_DEBUGP("URB allocation failed\n");
+ usb_stor_dbg(us, "URB allocation failed\n");
return -ENOMEM;
}
/* Release all our dynamic resources */
static void usb_stor_release_resources(struct us_data *us)
{
- US_DEBUGP("-- %s\n", __func__);
-
/* Tell the control thread to exit. The SCSI host must
* already have been removed and the DISCONNECTING flag set
* so that we won't accept any more commands.
*/
- US_DEBUGP("-- sending exit command to thread\n");
+ usb_stor_dbg(us, "-- sending exit command to thread\n");
complete(&us->cmnd_ready);
if (us->ctl_thread)
kthread_stop(us->ctl_thread);
/* Call the destructor routine, if it exists */
if (us->extra_destructor) {
- US_DEBUGP("-- calling extra_destructor()\n");
+ usb_stor_dbg(us, "-- calling extra_destructor()\n");
us->extra_destructor(us->extra);
}
/* Dissociate from the USB device */
static void dissociate_dev(struct us_data *us)
{
- US_DEBUGP("-- %s\n", __func__);
-
/* Free the buffers */
kfree(us->cr);
usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma);
struct us_data *us;
int result;
- US_DEBUGP("USB Mass Storage device detected\n");
+ dev_info(&intf->dev, "USB Mass Storage device detected\n");
/*
* Ask the SCSI layer to allocate a host structure, with extra
*/
host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us));
if (!host) {
- dev_warn(&intf->dev,
- "Unable to allocate the scsi host\n");
+ dev_warn(&intf->dev, "Unable to allocate the scsi host\n");
return -ENOMEM;
}
return 0;
BadDevice:
- US_DEBUGP("storage_probe() failed\n");
+ usb_stor_dbg(us, "storage_probe() failed\n");
release_everything(us);
return result;
}
result = -ENXIO;
goto BadDevice;
}
- US_DEBUGP("Transport: %s\n", us->transport_name);
- US_DEBUGP("Protocol: %s\n", us->protocol_name);
+ usb_stor_dbg(us, "Transport: %s\n", us->transport_name);
+ usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name);
/* fix for single-lun devices */
if (us->fflags & US_FL_SINGLE_LUN)
/* We come here if there are any problems */
BadDevice:
- US_DEBUGP("storage_probe() failed\n");
+ usb_stor_dbg(us, "storage_probe() failed\n");
release_everything(us);
return result;
}
{
struct us_data *us = usb_get_intfdata(intf);
- US_DEBUGP("storage_disconnect() called\n");
quiesce_and_remove_host(us);
release_everything(us);
}
} else {
unusual_dev = &for_dynamic_ids;
- US_DEBUGP("%s %s 0x%04x 0x%04x\n", "Use Bulk-Only transport",
- "with the Transparent SCSI protocol for dynamic id:",
+ dev_dbg(&intf->dev, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n",
id->idVendor, id->idProduct);
}
/* register the driver, return usb_register return code if error */
retval = usb_register(&usb_storage_driver);
if (retval == 0)
- pr_info("USB Mass Storage support registered.\n");
+ pr_info("USB Mass Storage support registered\n");
return retval;
}
static void __exit usb_stor_exit(void)
{
- US_DEBUGP("usb_stor_exit() called\n");
-
/* Deregister the driver
* This will cause disconnect() to be called for each
* attached unit
*/
- US_DEBUGP("-- calling usb_deregister()\n");
- usb_deregister(&usb_storage_driver) ;
+ pr_info("Deregistering USB Mass Storage driver...\n");
+ usb_deregister(&usb_storage_driver);
}
module_init(usb_stor_init);
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff