drm/i915: Use atomic waits for short non-atomic ones

usleep_range is not recommended for waits shorten than 10us.

Make the wait_for_us use the atomic variant for such waits.

To do so we need to reimplement the _wait_for_atomic macro to
be safe with regards to preemption and interrupts.

v2: Reimplement _wait_for_atomic to be irq and preemption safe.
    (Chris Wilson and Imre Deak)

v3: Fixed in_atomic check due rebase error.
v4: Build bug on non-constant timeouts.
v5: Compile away cpu migration code in atomic paths.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1467114710-29989-1-git-send-email-tvrtko.ursulin@linux.intel.com

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 3156d8df7921fb3bf2eb879170913d30d2dd728c..98a5be4ec8c5ce1441f39361230cb5200126339f 100644 (file)
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -69,39 +69,63 @@
 })
 
 #define wait_for(COND, MS)             _wait_for((COND), (MS) * 1000, 1000)
-#define wait_for_us(COND, US)          _wait_for((COND), (US), 1)
 
 /* If CONFIG_PREEMPT_COUNT is disabled, in_atomic() always reports false. */
 #if defined(CONFIG_DRM_I915_DEBUG) && defined(CONFIG_PREEMPT_COUNT)
-# define _WAIT_FOR_ATOMIC_CHECK WARN_ON_ONCE(!in_atomic())
+# define _WAIT_FOR_ATOMIC_CHECK(ATOMIC) WARN_ON_ONCE((ATOMIC) && !in_atomic())
 #else
-# define _WAIT_FOR_ATOMIC_CHECK do { } while (0)
+# define _WAIT_FOR_ATOMIC_CHECK(ATOMIC) do { } while (0)
 #endif
 
-#define _wait_for_atomic(COND, US) ({ \
-       unsigned long end__; \
-       int ret__ = 0; \
-       _WAIT_FOR_ATOMIC_CHECK; \
+#define _wait_for_atomic(COND, US, ATOMIC) \
+({ \
+       int cpu, ret, timeout = (US) * 1000; \
+       u64 base; \
+       _WAIT_FOR_ATOMIC_CHECK(ATOMIC); \
        BUILD_BUG_ON((US) > 50000); \
-       end__ = (local_clock() >> 10) + (US) + 1; \
-       while (!(COND)) { \
-               if (time_after((unsigned long)(local_clock() >> 10), end__)) { \
-                       /* Unlike the regular wait_for(), this atomic variant \
-                        * cannot be preempted (and we'll just ignore the issue\
-                        * of irq interruptions) and so we know that no time \
-                        * has passed since the last check of COND and can \
-                        * immediately report the timeout. \
-                        */ \
-                       ret__ = -ETIMEDOUT; \
+       if (!(ATOMIC)) { \
+               preempt_disable(); \
+               cpu = smp_processor_id(); \
+       } \
+       base = local_clock(); \
+       for (;;) { \
+               u64 now = local_clock(); \
+               if (!(ATOMIC)) \
+                       preempt_enable(); \
+               if (COND) { \
+                       ret = 0; \
+                       break; \
+               } \
+               if (now - base >= timeout) { \
+                       ret = -ETIMEDOUT; \
                        break; \
                } \
                cpu_relax(); \
+               if (!(ATOMIC)) { \
+                       preempt_disable(); \
+                       if (unlikely(cpu != smp_processor_id())) { \
+                               timeout -= now - base; \
+                               cpu = smp_processor_id(); \
+                               base = local_clock(); \
+                       } \
+               } \
        } \
+       ret; \
+})
+
+#define wait_for_us(COND, US) \
+({ \
+       int ret__; \
+       BUILD_BUG_ON(!__builtin_constant_p(US)); \
+       if ((US) > 10) \
+               ret__ = _wait_for((COND), (US), 10); \
+       else \
+               ret__ = _wait_for_atomic((COND), (US), 0); \
        ret__; \
 })
 
-#define wait_for_atomic(COND, MS)      _wait_for_atomic((COND), (MS) * 1000)
-#define wait_for_atomic_us(COND, US)   _wait_for_atomic((COND), (US))
+#define wait_for_atomic(COND, MS)      _wait_for_atomic((COND), (MS) * 1000, 1)
+#define wait_for_atomic_us(COND, US)   _wait_for_atomic((COND), (US), 1)
 
 #define KHz(x) (1000 * (x))
 #define MHz(x) KHz(1000 * (x))