/*
* USB USBVISION Video device driver 0.9.8.3cvs (For Kernel 2.4.19-2.4.32 + 2.6.0-2.6.16)
*
- *
+ *
*
* Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
*
* June 2, 2004 - 0.9.6 Dwaine Garden
* - Fixed sourceforge.net cvs repository.
* - Added #if LINUX_VERSION_CODE > KERNEL_VERSION(2,4,26) for .owner to help compiling under kernels 2.4.x which do not have the i2c v2.8.x updates.
- * - Added device Hauppauge WinTv-USB III (PAL) FM Model 597 to usbvision.h
+ * - Added device Hauppauge WinTv-USB III (PAL) FM Model 597 to usbvision.h
*
* July 1, 2004 -0.9.6 Dwaine Garden
* - Patch was submitted by Hal Finkel to fix the problem with the tuner not working under kernel 2.6.7.
* - Changed usbvision_muxsel to address the problem with black & white s-video output for NT1004 devices with saa7114 video decoder. Thanks to Emmanuel for the patch and testing.
* - Fixed up SECAM devices which could not properly output video. Changes to usbmuxsel. Thanks to Emmanuel for the patch and everyone with a SECAM device which help test.
* - Removed some commented out code. Clean up.
- * - Tried to fix up the annoying empty directories in the sourceforge.net cvs. Fuck it up again. 8*(
+ * - Tried to fix up the annoying empty directories in the sourceforge.net cvs. Fuck it up again. 8*(
*
* November 15, 2004 - 0.9.8 Dwaine Garden
* - Release new tar - 0.9.8 on sourceforge.net
* - Better support for mythtv.
*
* January 2, 2005 - 0.9.8.1cvs Dwaine Garden
- * - Setup that you can specify which device is used for video. Default is auto detect next available device number eg. /dev/videoX
+ * - Setup that you can specify which device is used for video. Default is auto detect next available device number eg. /dev/videoX
* - Setup that you can specify which device is used for radio. Default is auto detect next available device number eg. /dev/radioX
* - usb_unlink_urb() is deprecated for synchronous unlinks. Using usb_kill_urb instead.
* - usbvision_kvirt_to_pa is deprecated. Removed.
* April 20, 2005 - 0.9.8.2cvs Dwaine Garden
* - Release lock in usbvision_v4l_read_done. -Thanks to nplanel for the patch.
* - Additional comments to the driver.
- * - Fixed some spelling mistakes. 8*)
+ * - Fixed some spelling mistakes. 8*)
*
* April 23, 2005 - 0.9.8.2cvs Joerg Heckenbach
* - Found bug in usbvision line counting. Now there should be no spurious lines in the image any longer.
- * - Swapped usbvision_register_video and usbvision_configure_video to fix problem with PowerOnAtOpen=0.
+ * - Swapped usbvision_register_video and usbvision_configure_video to fix problem with PowerOnAtOpen=0.
* Thanks to Erwan Velu
*
* April 26, 2005 - 0.9.8.2cvs Joerg Heckenbach
* - Fixed problem with rmmod module and oppses. Replaced vfree(usbvision->overlay_base) with iounmap(usbvision->overlay_base).
- * - Added function usb_get_dev(dev) and ; To help with unloading the module multiple times without crashing.
+ * - Added function usb_get_dev(dev) and ; To help with unloading the module multiple times without crashing.
* (Keep the reference count in kobjects correct)
*
* June 14, 2005 - 0.9.8.2cvs Dwaine
- * - Missed a change in saa7113.c for checking kernel version. Added conditional if's.
+ * - Missed a change in saa7113.c for checking kernel version. Added conditional if's.
*
* June 15, 2005 - 0.9.8.2cvs Dwaine
- * - Added new device WinTV device VendorId 0573 and ProductId 4d29.
+ * - Added new device WinTV device VendorId 0573 and ProductId 4d29.
* - Hacked some support for newer NT1005 devices. This devices only seem to have one configuration, not multiple configurations like the NT1004.
*
* June 29, 2005 - 0.9.8.2cvs Dwaine
- * - Added new device WinTV device VendorId 0573 and ProductId 4d37.
- * - Because of the first empty entry in usbvision_table, modutils failed to create the necessary entries for modules.usbmap.
- * This means hotplug won't work for usbvision. Thanks to Gary Ng.
+ * - Added new device WinTV device VendorId 0573 and ProductId 4d37.
+ * - Because of the first empty entry in usbvision_table, modutils failed to create the necessary entries for modules.usbmap.
+ * This means hotplug won't work for usbvision. Thanks to Gary Ng.
* - Sent an e-mail to the maintainer of usb.ids. New devices identified need to be added.
- * - Fixed compile error with saa7113 under kernel 2.6.12.
+ * - Fixed compile error with saa7113 under kernel 2.6.12.
*
* July 6, 2005 - 0.9.8.2cvs Dwaine
- * - Patch submitted by Gary Ng for two additional procfs entries. Device Input and Frequency setting.
+ * - Patch submitted by Gary Ng for two additional procfs entries. Device Input and Frequency setting.
*
* July 12, 2005 - 0.9.8.2cvs Dwaine
* - New tuner identified for some devices it's called TCL_MFPE05. This tuner uses the same API as tuner 38 in tuner.c.
* - Thanks to lynx31 for contacting Hauppage and asking them.
- * - I have no clue as to which devices use this new tuner, so people will have to contact me and tell me.
+ * - I have no clue as to which devices use this new tuner, so people will have to contact me and tell me.
*
* July 21, 2005 - 0.9.8.2cvs Dwaine
* - Patched usbvision.c with missing ifdef kernversion statement so the module will compile with older kernels and v4l.
* -Changed number of bytes for i2c write to 4 as per the NT100X spec sheet. Thanks to Merlum for finding it.
* -Remove the radio option for device Hauppauge WinTV USB device Model 40219 Rev E189. This device does not have a FM radio. Thanks to Shadwell.
* -Added radio option for device Hauppauge WinTV USB device Model 40219 Rev E189 again. Just got an e-mail indicating their device has one. 8*)
- *
+ *
* Aug 27, 2006 - 0.9.8.3cvs Dwaine
* -Changed ifdef statement so the usbvision driver will compile with kernels at 2.6.12.
* -Updated readme files for new updated tuner list for v4l devices.
- *
+ *
*
*
* TODO:
#define USBVISION_VERSION __stringify(USBVISION_DRIVER_VERSION_MAJOR) "." __stringify(USBVISION_DRIVER_VERSION_MINOR) "." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL) " " USBVISION_DRIVER_VERSION_COMMENT
#define USBVISION_DRIVER_VERSION KERNEL_VERSION(USBVISION_DRIVER_VERSION_MAJOR,USBVISION_DRIVER_VERSION_MINOR,USBVISION_DRIVER_VERSION_PATCHLEVEL)
-#include <media/saa7115.h>
-#include <media/v4l2-common.h>
+#include <media/saa7115.h>
+#include <media/v4l2-common.h>
#include <media/tuner.h>
#include <media/audiochip.h>
};
static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = {
- { 1, 1, 8, V4L2_PIX_FMT_GREY , "GREY" },
- { 1, 2, 16, V4L2_PIX_FMT_RGB565 , "RGB565" },
- { 1, 3, 24, V4L2_PIX_FMT_RGB24 , "RGB24" },
- { 1, 4, 32, V4L2_PIX_FMT_RGB32 , "RGB32" },
- { 1, 2, 16, V4L2_PIX_FMT_RGB555 , "RGB555" },
- { 1, 2, 16, V4L2_PIX_FMT_YUYV , "YUV422" },
- { 1, 2, 12, V4L2_PIX_FMT_YVU420 , "YUV420P" }, // 1.5 !
- { 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" }
+ { 1, 1, 8, V4L2_PIX_FMT_GREY , "GREY" },
+ { 1, 2, 16, V4L2_PIX_FMT_RGB565 , "RGB565" },
+ { 1, 3, 24, V4L2_PIX_FMT_RGB24 , "RGB24" },
+ { 1, 4, 32, V4L2_PIX_FMT_RGB32 , "RGB32" },
+ { 1, 2, 16, V4L2_PIX_FMT_RGB555 , "RGB555" },
+ { 1, 2, 16, V4L2_PIX_FMT_YUYV , "YUV422" },
+ { 1, 2, 12, V4L2_PIX_FMT_YVU420 , "YUV420P" }, // 1.5 !
+ { 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" }
};
#define DEFAULT_SCRATCH_BUF_SIZE (0x20000) // 128kB memory scratch buffer
static const int scratch_buf_size = DEFAULT_SCRATCH_BUF_SIZE;
-static int init_brightness = 128; // Initalize the brightness of the video device
-static int init_contrast = 192; // Initalize the contrast of the video device
-static int init_saturation = 128; // Initalize the staturation mode of the video device
-static int init_hue = 128; // Initalize the Hue settings of the video device
-
// Function prototypes
static int usbvision_restart_isoc(struct usb_usbvision *usbvision);
static int usbvision_begin_streaming(struct usb_usbvision *usbvision);
static int usbvision_adjust_compression (struct usb_usbvision *usbvision);
static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision);
static void usbvision_release(struct usb_usbvision *usbvision);
-static int usbvision_set_input(struct usb_usbvision *usbvision);
-static int usbvision_set_output(struct usb_usbvision *usbvision, int width, int height);
-static void call_i2c_clients(struct usb_usbvision *usbvision, unsigned int cmd, void *arg);
+static int usbvision_set_input(struct usb_usbvision *usbvision);
+static int usbvision_set_output(struct usb_usbvision *usbvision, int width, int height);
+static void call_i2c_clients(struct usb_usbvision *usbvision, unsigned int cmd, void *arg);
// Bit flags (options)
static int dga = 1; // Set the default Direct Graphic Access
static int PowerOnAtOpen = 1; // Set the default device to power on at startup
static int SwitchSVideoInput = 0; // To help people with Black and White output with using s-video input. Some cables and input device are wired differently.
-static int video_nr = -1; // Sequential Number of Video Device
-static int radio_nr = -1; // Sequential Number of Radio Device
+static int video_nr = -1; // Sequential Number of Video Device
+static int radio_nr = -1; // Sequential Number of Radio Device
static int vbi_nr = -1; // Sequential Number of VBI Device
static char *CustomDevice=NULL; // Set as nothing....
MODULE_PARM(dga, "i"); // Grab the Direct Graphic Access
MODULE_PARM(PowerOnAtOpen, "i"); // Grab the device to power on at startup
MODULE_PARM(SwitchSVideoInput, "i"); // To help people with Black and White output with using s-video input. Some cables and input device are wired differently.
-MODULE_PARM(video_nr, "i"); // video_nr option allows to specify a certain /dev/videoX device (like /dev/video0 or /dev/video1 ...)
+MODULE_PARM(video_nr, "i"); // video_nr option allows to specify a certain /dev/videoX device (like /dev/video0 or /dev/video1 ...)
MODULE_PARM(radio_nr, "i"); // radio_nr option allows to specify a certain /dev/radioX device (like /dev/radio0 or /dev/radio1 ...)
MODULE_PARM(vbi_nr, "i"); // vbi_nr option allows to specify a certain /dev/vbiX device (like /dev/vbi0 or /dev/vbi1 ...)
-MODULE_PARM(CustomDevice, "s"); // .... CustomDevice
+MODULE_PARM(CustomDevice, "s"); // .... CustomDevice
#endif
MODULE_PARM_DESC(flags, " Set the default Overlay Display mode of the device driver. Default: 0 (Off)");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENSE);
MODULE_VERSION(DRIVER_VERSION);
- MODULE_ALIAS(DRIVER_ALIAS);
+ MODULE_ALIAS(DRIVER_ALIAS);
#ifdef MODULE
static unsigned int autoload = 1;
/****************************************************************************************/
-/* SYSFS Code - Copied from the stv680.c usb module. */
-/* Device information is located at /sys/class/video4linux/video0 */
+/* SYSFS Code - Copied from the stv680.c usb module. */
+/* Device information is located at /sys/class/video4linux/video0 */
/* Device parameters information is located at /sys/module/usbvision */
/* Device USB Information is located at /sys/bus/usb/drivers/USBVision Video Grabber */
/****************************************************************************************/
static ssize_t show_version(struct class_device *cd, char *buf)
{
return sprintf(buf, "%s\n", DRIVER_VERSION);
-}
+}
static CLASS_DEVICE_ATTR(version, S_IRUGO, show_version, NULL);
static ssize_t show_model(struct class_device *class_dev, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
- struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n", usbvision_device_data[usbvision->DevModel].ModelString);
-}
+}
static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
static ssize_t show_hue(struct class_device *class_dev, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
- struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%d\n", usbvision->hue >> 8);
-}
+}
static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
static ssize_t show_contrast(struct class_device *class_dev, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
- struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%d\n", usbvision->contrast >> 8);
-}
+}
static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
static ssize_t show_brightness(struct class_device *class_dev, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
- struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%d\n", usbvision->brightness >> 8);
-}
+}
static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
static ssize_t show_saturation(struct class_device *class_dev, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
- struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%d\n", usbvision->saturation >> 8);
-}
+}
static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
static ssize_t show_streaming(struct class_device *class_dev, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
- struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n", YES_NO(usbvision->streaming));
-}
+}
static CLASS_DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL);
static ssize_t show_overlay(struct class_device *class_dev, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
- struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n", YES_NO(usbvision->overlay));
-}
+}
static CLASS_DEVICE_ATTR(overlay, S_IRUGO, show_overlay, NULL);
static ssize_t show_compression(struct class_device *class_dev, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
- struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n", YES_NO(usbvision->isocMode==ISOC_MODE_COMPRESS));
-}
+}
static CLASS_DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL);
static ssize_t show_device_bridge(struct class_device *class_dev, char *buf)
{
- struct video_device *vdev = to_video_device(class_dev);
- struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%d\n", usbvision->bridgeType);
-}
+}
static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL);
static void usbvision_create_sysfs(struct video_device *vdev)
*
* Parameters:
* fullframe: if TRUE then entire frame is filled, otherwise the procedure
- * continues from the current scanline.
+ * continues from the current scanline.
* pmode 0: fill the frame with solid blue color (like on VCR or TV)
- * 1: Draw a colored grid
+ * 1: Draw a colored grid
*
*/
void usbvision_testpattern(struct usb_usbvision *usbvision, int fullframe,
if (overlay) {
frame = &usbvision->overlay_frame;
- imageSize = frame->frmwidth * frame->frmheight;
+ imageSize = frame->frmwidth * frame->frmheight;
if (usbvision->overlay_base == NULL) {
//video_buffer is not set yet
return ParseState_NextFrame;
}
else {
frame = &usbvision->frame[usbvision->curFrameNum];
- imageSize = frame->frmwidth * frame->frmheight;
+ imageSize = frame->frmwidth * frame->frmheight;
if ( (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) ||
(frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) )
- { // this is a planar format
- //... v4l2_linesize not used here.
+ { // this is a planar format
+ //... v4l2_linesize not used here.
f = frame->data + (frame->width * frame->curline);
- } else
+ } else
f = frame->data + (frame->v4l2_linesize * frame->curline);
-
+
if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV){ //initialise u and v pointers
- // get base of u and b planes add halfoffset
-
- u = frame->data
- + imageSize
+ // get base of u and b planes add halfoffset
+
+ u = frame->data
+ + imageSize
+ (frame->frmwidth >>1) * frame->curline ;
v = u + (imageSize >>1 );
-
+
} else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420){
-
- v = frame->data + imageSize + ((frame->curline* (frame->width))>>2) ;
+
+ v = frame->data + imageSize + ((frame->curline* (frame->width))>>2) ;
u = v + (imageSize >>2) ;
}
}
return ParseState_NextFrame;
}
- bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
+ bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
clipmask_index = frame->curline * MAX_FRAME_WIDTH;
scratch_get(usbvision, StripData, StripLen);
if (BlockPos > StripLen) {
usbvision->stripLenErrors++;
}
-
+
for (Idx = 0; Idx < IdxEnd; Idx++) {
if((overlay) && (clipped_pixel(clipmask_index))) {
f += bytes_per_pixel;
}
else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) {
*f++ = Y [Idx];
- if ( !(( Idx & 0x01 ) | ( frame->curline & 0x01 )) ){
-
+ if ( !(( Idx & 0x01 ) | ( frame->curline & 0x01 )) ){
+
/* only need do this for 1 in 4 pixels */
/* intraframe buffer is YUV420 format */
*u++ = U[Idx >>1];
*v++ = V[Idx >>1];
}
-
+
}
else {
YUV_TO_RGB_BY_THE_BOOK(Y[Idx], U[Idx/2], V[Idx/2], rv, gv, bv);
}
clipmask_index++;
}
- /* Deal with non-integer no. of bytes for YUV420P */
- if (frame->v4l2_format.format != V4L2_PIX_FMT_YVU420 )
- *pcopylen += frame->v4l2_linesize;
- else
- *pcopylen += frame->curline & 0x01 ? frame->v4l2_linesize : frame->v4l2_linesize << 1;
-
+ /* Deal with non-integer no. of bytes for YUV420P */
+ if (frame->v4l2_format.format != V4L2_PIX_FMT_YVU420 )
+ *pcopylen += frame->v4l2_linesize;
+ else
+ *pcopylen += frame->curline & 0x01 ? frame->v4l2_linesize : frame->v4l2_linesize << 1;
+
frame->curline += 1;
if (frame->curline >= frame->frmheight) {
/* Make sure there's enough data for the entire line */
/* In this mode usbvision transfer 3 bytes for every 2 pixels */
/* I need two lines to decode the color */
- bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
+ bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
stretch_bytes = (usbvision->stretch_width - 1) * bytes_per_pixel;
clipmask_even_index = frame->curline * MAX_FRAME_WIDTH;
clipmask_odd_index = clipmask_even_index + MAX_FRAME_WIDTH;
urb->iso_frame_desc[i].status = 0;
urb->iso_frame_desc[i].actual_length = 0;
}
- urb->status = 0;
+ urb->status = 0;
urb->dev = usbvision->dev;
errCode = usb_submit_urb (urb, GFP_ATOMIC);
}
if ((usbvision->have_tuner) && (usbvision->tuner_type != -1)) {
tun_addr.mode_mask = T_ANALOG_TV;
- tun_addr.type = usbvision->tuner_type;
- tun_addr.addr = ADDR_UNSET;
- client->driver->command(client,TUNER_SET_TYPE_ADDR, &tun_addr);
-
+ tun_addr.type = usbvision->tuner_type;
+ tun_addr.addr = ADDR_UNSET;
+ client->driver->command(client,TUNER_SET_TYPE_ADDR, &tun_addr);
+
call_i2c_clients(usbvision, VIDIOC_S_INPUT, &usbvision->input.index);
}
// FIXME : need to add a call VIDIOC_S_CTRL for each control
int retval;
int wrcount = 0;
int count;
- int maxLen = 4;
+ int maxLen = 4;
struct usb_usbvision *usbvision = (struct usb_usbvision *) data;
while (len > 0) {
break;
}
if (usbvision_device_data[usbvision->DevModel].Tuner == 1) {
- request_module("tuner");
+ request_module("tuner");
}
}
#endif
}
if (usbvision->input.std & V4L2_STD_625_50) {
- frameDrop = frameRate * 32 / 25 - 1;
+ frameDrop = frameRate * 32 / 25 - 1;
}
else if (usbvision->input.std & V4L2_STD_525_60) {
frameDrop = frameRate * 32 / 30 - 1;
value[2] = 0x00; // Reg.46 Force intra mode on all new frames
value[3] = 0x00; // Reg.47 FORCE_UP <- 0 normal operation (not force)
value[4] = 0xA2; // Reg.48 BUF_THR I'm not sure if this does something in not compressed mode.
- value[5] = 0x00; // Reg.49 DVI_YUV This has nothing to do with compression
+ value[5] = 0x00; // Reg.49 DVI_YUV This has nothing to do with compression
//catched values for NT1004
// value[0] = 0xFF; // Never apply intra mode automatically
dvi_yuv_value = usbvision_device_data[usbvision->DevModel].Dvi_yuv & 0xff;
}
else if(usbvision_device_data[usbvision->DevModel].Codec == CODEC_SAA7113) {
- /* This changes as the fine sync control changes. Further investigation necessary */
+ /* This changes as the fine sync control changes. Further investigation necessary */
dvi_yuv_value = 0x06;
}
del_timer(&usbvision->powerOffTimer);
INIT_WORK(&usbvision->powerOffWork, call_usbvision_power_off, usbvision);
(void) schedule_work(&usbvision->powerOffWork);
-
+
}
usbvision_set_input(usbvision);
usbvision_set_output(usbvision, MAX_USB_WIDTH, MAX_USB_HEIGHT);
usbvision_restart_isoc(usbvision);
-
+
/* cosas del PCM */
return USBVISION_IS_OPERATIONAL(usbvision);
}
usb_kill_urb(usbvision->sbuf[bufIdx].urb);
usb_free_urb(usbvision->sbuf[bufIdx].urb);
usbvision->sbuf[bufIdx].urb = NULL;
- }
+ }
PDEBUG(DBG_ISOC, "%s: streaming=0\n", __FUNCTION__);
usbvision->streaming = 0;
-
+
if (!usbvision->remove_pending) {
static int usbvision_muxsel(struct usb_usbvision *usbvision, int channel, int norm)
{
int mode[4];
- int audio[]= {1, 0, 0, 0};
+ int audio[]= {1, 0, 0, 0};
struct v4l2_routing route;
//channel 0 is TV with audiochannel 1 (tuner mono)
//channel 1 is Composite with audio channel 0 (line in)
// set the new channel
// Regular USB TV Tuners -> channel: 0 = Television, 1 = Composite, 2 = S-Video
- // Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red
+ // Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red
switch (usbvision_device_data[usbvision->DevModel].Codec) {
case CODEC_SAA7113:
else {
mode[2] = 7;
}
- if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
+ if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
mode[0] = 0; mode[1] = 2; mode[3] = 3; // Special for four input devices
}
- else {
+ else {
mode[0] = 0; mode[1] = 2; //modes for regular saa7113 devices
}
break;
err("%s: unable to allocate %d for compr. frame buffer", __FUNCTION__, IFB_size);
errCode = -ENOMEM;
}
-
+
}
if (errCode) {
/* Have to free all that memory */
case 0:
if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
strcpy(vi->name, "White Video Input");
- }
- else {
+ }
+ else {
strcpy(vi->name, "Television");
vi->type = V4L2_INPUT_TYPE_TUNER;
vi->audioset = 1;
}
break;
case 1:
- vi->type = V4L2_INPUT_TYPE_CAMERA;
+ vi->type = V4L2_INPUT_TYPE_CAMERA;
if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
strcpy(vi->name, "Green Video Input");
- }
- else {
+ }
+ else {
strcpy(vi->name, "Composite Video Input");
}
vi->std = V4L2_STD_PAL;
break;
case 2:
- vi->type = V4L2_INPUT_TYPE_CAMERA;
+ vi->type = V4L2_INPUT_TYPE_CAMERA;
if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
strcpy(vi->name, "Yellow Video Input");
- }
- else {
+ }
+ else {
strcpy(vi->name, "S-Video Input");
}
vi->std = V4L2_STD_PAL;
break;
case 3:
- vi->type = V4L2_INPUT_TYPE_CAMERA;
+ vi->type = V4L2_INPUT_TYPE_CAMERA;
strcpy(vi->name, "Red Video Input");
vi->std = V4L2_STD_PAL;
- break;
+ break;
}
PDEBUG(DBG_IOCTL, "VIDIOC_ENUMINPUT name=%s:%d tuners=%d type=%d norm=%x", vi->name, vi->index, vi->tuner,vi->type,(int)vi->std);
return 0;
}
return 0;
}
- case VIDIOC_G_INPUT:
+ case VIDIOC_G_INPUT:
{
int *input = arg;
*input = usbvision->input.index;
return 0;
}
- case VIDIOC_S_INPUT:
+ case VIDIOC_S_INPUT:
{
int *input = arg;
if ((*input >= usbvision->video_inputs) || (*input < 0) )
up(&usbvision->lock);
return 0;
}
- case VIDIOC_G_STD:
+ case VIDIOC_G_STD:
{
v4l2_std_id *std = arg;
*std = usbvision->input.std;
PDEBUG(DBG_IOCTL, "VIDIOC_G_STD std_id=%x", (unsigned)*std);
return 0;
}
- case VIDIOC_S_STD:
+ case VIDIOC_S_STD:
{
v4l2_std_id *std = arg;
PDEBUG(DBG_IOCTL, "VIDIOC_S_STD std_id=%x", (unsigned)*std);
return 0;
}
- case VIDIOC_G_TUNER:
+ case VIDIOC_G_TUNER:
{
struct v4l2_tuner *vt = arg;
struct v4l2_tuner status;
// FIXME: void function ???
return 0;
}
- case VIDIOC_QUERYCTRL:
+ case VIDIOC_QUERYCTRL:
{
- struct v4l2_queryctrl *qc = arg;
- switch(qc->id) {
- case V4L2_CID_BRIGHTNESS:
- case V4L2_CID_HUE:
- case V4L2_CID_SATURATION:
- case V4L2_CID_CONTRAST:
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_MUTE:
- return v4l2_ctrl_query_fill_std(qc);
- break;
- default:
+ struct v4l2_queryctrl *ctrl = arg;
+ int id=ctrl->id;
+
+ memset(ctrl,0,sizeof(*ctrl));
+ ctrl->id=id;
+
+ i2c_clients_command(&usbvision->i2c_adap, cmd, arg);
+
+ if (ctrl->type)
+ return 0;
+ else
return -EINVAL;
- }
- return 0;
+
+ PDEBUG(DBG_IOCTL,"VIDIOC_QUERYCTRL id=%x value=%x",ctrl->id,ctrl->type);
}
case VIDIOC_G_CTRL:
{
struct v4l2_control *ctrl = arg;
- switch (ctrl->id) {
- case V4L2_CID_BRIGHTNESS:
- ctrl->value = usbvision->brightness;
- break;
- case V4L2_CID_CONTRAST:
- ctrl->value = usbvision->contrast;
- break;
- case V4L2_CID_SATURATION:
- ctrl->value = usbvision->saturation;
- break;
- case V4L2_CID_HUE:
- ctrl->value = usbvision->hue;
- break;
- case V4L2_CID_AUDIO_VOLUME:
- /* ctrl->value = usbvision->volume; */
- break;
- case V4L2_CID_AUDIO_MUTE:
- ctrl->value = usbvision->AudioMute;
- break;
- default:
- return -EINVAL;
- }
- PDEBUG(DBG_IOCTL, "VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value);
+ PDEBUG(DBG_IOCTL,"VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value);
+ call_i2c_clients(usbvision, VIDIOC_G_CTRL, ctrl);
return 0;
}
case VIDIOC_S_CTRL:
{
struct v4l2_control *ctrl = arg;
+
PDEBUG(DBG_IOCTL, "VIDIOC_S_CTRL id=%x value=%x",ctrl->id,ctrl->value);
call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl);
return 0;
vb->sequence = usbvision->frame_num;
return 0;
}
- case VIDIOC_QBUF: // VIDIOCMCAPTURE + VIDIOCSYNC
+ case VIDIOC_QBUF: // VIDIOCMCAPTURE + VIDIOCSYNC
{
struct v4l2_buffer *vb = arg;
struct usbvision_frame *frame;
case VIDIOC_STREAMON:
{
int b=V4L2_BUF_TYPE_VIDEO_CAPTURE;
- call_i2c_clients(usbvision,VIDIOC_STREAMON , &b);
+ call_i2c_clients(usbvision,VIDIOC_STREAMON , &b);
return 0;
}
case VIDIOC_STREAMOFF:
up(&usbvision->lock);
return 0;
}
- case VIDIOC_G_FBUF:
+ case VIDIOC_G_FBUF:
{
struct v4l2_framebuffer *vb = arg;
if ( (dga == 0) &&
(vfd->type == V4L2_BUF_TYPE_VIDEO_OVERLAY) &&
(usbvision->palette.format != V4L2_PIX_FMT_YVU420) &&
- (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) {
+ (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) {
return -EINVAL;
}
if(vfd->index>=USBVISION_SUPPORTED_PALETTES-1) {
case VIDIOC_G_FMT:
{
struct v4l2_format *vf = arg;
-
+
if ( (dga == 0) &&
(vf->type == V4L2_BUF_TYPE_VIDEO_OVERLAY) &&
(usbvision->palette.format != V4L2_PIX_FMT_YVU420) &&
- (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) {
+ (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) {
return -EINVAL;
}
down(&usbvision->lock);
vf->fmt.win.w.left, vf->fmt.win.w.top, vf->fmt.win.w.width, vf->fmt.win.w.height, vf->fmt.win.chromakey, vf->fmt.win.clipcount);
return 0;
}
- case VIDIOC_S_FMT:
+ case VIDIOC_S_FMT:
{
struct v4l2_format *vf = arg;
struct v4l2_clip *vc=NULL;
if ( (dga == 0) &&
(vf->type == V4L2_BUF_TYPE_VIDEO_OVERLAY) &&
(usbvision->palette.format != V4L2_PIX_FMT_YVU420) &&
- (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) {
+ (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) {
return -EINVAL;
}
if(vf->type == V4L2_BUF_TYPE_VIDEO_OVERLAY) {
case VIDIOC_OVERLAY:
{
int *v = arg;
-
+
if ( (dga == 0) &&
(usbvision->palette.format != V4L2_PIX_FMT_YVU420) &&
- (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) {
+ (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) {
PDEBUG(DBG_IOCTL, "VIDIOC_OVERLAY DGA disabled");
return -EINVAL;
}
goto usbvision_v4l2_read_done;
}
PDEBUG(DBG_IO, "Waiting frame grabbing");
- rc = wait_event_interruptible(frame->wq, (frame->grabstate == FrameState_Done) ||
+ rc = wait_event_interruptible(frame->wq, (frame->grabstate == FrameState_Done) ||
(frame->grabstate == FrameState_Error));
if (rc) {
goto usbvision_v4l2_read_done;
pos = (unsigned long) usbvision->fbuf;
while (size > 0) {
-
+
// Really ugly....
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) //Compatibility for 2.6.10+ kernels
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) //Compatibility for 2.6.10+ kernels
page = vmalloc_to_pfn((void *)pos);
- if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
+ if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
return -EAGAIN;
}
#else //Compatibility for 2.6.0 - 2.6.9 kernels
/***************************
* V4L2 IOCTLs *
***************************/
- case VIDIOC_QUERYCAP:
+ case VIDIOC_QUERYCAP:
{
struct v4l2_capability *vc=arg;
memset(vc, 0, sizeof(struct v4l2_capability));
PDEBUG(DBG_RIO, "%s: VIDIOC_QUERYCAP", __FUNCTION__);
return 0;
}
- case VIDIOC_QUERYCTRL:
+ case VIDIOC_QUERYCTRL:
{
struct v4l2_queryctrl *qc = arg;
switch(qc->id)
}
return 0;
}
- case VIDIOC_G_CTRL:
+ case VIDIOC_G_CTRL:
{
struct v4l2_control *ctrl = arg;
PDEBUG(DBG_IOCTL, "VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value);
}
return 0;
}
- case VIDIOC_S_CTRL:
+ case VIDIOC_S_CTRL:
{
struct v4l2_control *ctrl = arg;
call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl);
PDEBUG(DBG_RIO, "%s: VIDIOC_S_CTRL id=%x value=%x", __FUNCTION__,ctrl->id,ctrl->value);
return 0;
}
- case VIDIOC_G_TUNER:
+ case VIDIOC_G_TUNER:
{
struct v4l2_tuner *vt = arg;
PDEBUG(DBG_RIO, "%s: VIDIOC_G_TUNER signal=%d", __FUNCTION__, vt->signal);
return 0;
}
- case VIDIOC_S_TUNER:
+ case VIDIOC_S_TUNER:
{
struct v4l2_tuner *vt = arg;
PDEBUG(DBG_RIO, "%s: VIDIOC_S_TUNER", __FUNCTION__);
return 0;
}
- case VIDIOC_G_AUDIO:
+ case VIDIOC_G_AUDIO:
{
struct v4l2_audio *va = arg;
memset(va,0, sizeof(va));
PDEBUG(DBG_IOCTL, "VIDIOC_G_AUDIO");
return 0;
}
- case VIDIOC_S_AUDIO:
+ case VIDIOC_S_AUDIO:
{
struct v4l2_audio *v = arg;
if(v->index) {
// FIXME: void function ???
return 0;
}
- case VIDIOC_G_FREQUENCY:
+ case VIDIOC_G_FREQUENCY:
{
struct v4l2_frequency *freq = arg;
freq->tuner = 0; // Only one tuner
PDEBUG(DBG_RIO, "VIDIOC_G_FREQUENCY freq=0x%X", (unsigned)freq->frequency);
return 0;
}
- case VIDIOC_S_FREQUENCY:
+ case VIDIOC_S_FREQUENCY:
{
struct v4l2_frequency *freq = arg;
usbvision->freq = freq->frequency;
/***************************
* V4L1 IOCTLs *
***************************/
- case VIDIOCGCAP:
+ case VIDIOCGCAP:
{
struct video_capability *vc = arg;
if (usbvision == NULL)
return;
-
- model = usbvision->DevModel;
- RESTRICT_TO_RANGE(init_brightness, 0, 255);
- RESTRICT_TO_RANGE(init_contrast, 0, 255);
- RESTRICT_TO_RANGE(init_saturation, 0, 255);
- RESTRICT_TO_RANGE(init_hue, 0, 255);
-
- usbvision->saturation = init_saturation << 8;
- usbvision->hue = init_hue << 8;
- usbvision->brightness = init_brightness << 8;
- usbvision->contrast = init_contrast << 8;
+ model = usbvision->DevModel;
usbvision->depth = 24;
usbvision->palette = usbvision_v4l2_format[2]; // V4L2_PIX_FMT_RGB24;
}
usbvision->vbi = NULL;
}
-
+
// Radio Device:
if (usbvision->rdev) {
PDEBUG(DBG_PROBE, "unregister /dev/radio%d [v4l2]", usbvision->rdev->minor & 0x1f);
}
info("USBVision[%d]: registered USBVision Radio device /dev/radio%d [v4l2]", usbvision->nr, usbvision->rdev->minor & 0x1f);
}
- // vbi Device:
+ // vbi Device:
if (usbvision_device_data[usbvision->DevModel].vbi) {
usbvision->vbi = usbvision_vdev_init(usbvision, &usbvision_vbi_template, "USBVision VBI");
if (usbvision->vdev == NULL) {
/* Is it an USBVISION video dev? */
model = 0;
for(model = 0; usbvision_device_data[model].idVendor; model++) {
- if (le16_to_cpu(dev->descriptor.idVendor) != usbvision_device_data[model].idVendor) {
+ if (le16_to_cpu(dev->descriptor.idVendor) != usbvision_device_data[model].idVendor) {
continue;
}
- if (le16_to_cpu(dev->descriptor.idProduct) != usbvision_device_data[model].idProduct) {
+ if (le16_to_cpu(dev->descriptor.idProduct) != usbvision_device_data[model].idProduct) {
continue;
}
}
usb_get_dev(dev);
-
+
if ((usbvision = usbvision_alloc(dev)) == NULL) {
err("%s: couldn't allocate USBVision struct", __FUNCTION__);
return -ENOMEM;
}
else if (usbvision_device_data[model].ModelString == "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)") {
usbvision->bridgeType = BRIDGE_NT1005;
- }
+ }
else {
usbvision->bridgeType = BRIDGE_NT1003;
}
usb_set_intfdata (intf, usbvision);
- usbvision_create_sysfs(usbvision->vdev);
+ usbvision_create_sysfs(usbvision->vdev);
PDEBUG(DBG_PROBE, "success");
return 0;
if(CustomDevice)
{
char *parse=CustomDevice;
-
+
PDEBUG(DBG_PROBE, "CustomDevide=%s", CustomDevice);
/*format is CustomDevice="0x0573 0x4D31 0 7113 3 PAL 1 1 1 5 -1 -1 -1 -1 -1"
usbvision_device_data[0].X_Offset;
usbvision_device_data[0].Y_Offset;
usbvision_device_data[0].Dvi_yuv;
- usbvision_device_data[0].ModelString;
+ usbvision_device_data[0].ModelString;
*/
-
+
rmspace(parse);
usbvision_device_data[0].ModelString="USBVISION Custom Device";
PDEBUG(DBG_FUNC, "FUNC debugging is enabled");
PDEBUG(DBG_I2C, "I2C debugging is enabled");
- /* disable planar mode support unless compression enabled */
- if (isocMode != ISOC_MODE_COMPRESS ) {
+ /* disable planar mode support unless compression enabled */
+ if (isocMode != ISOC_MODE_COMPRESS ) {
// FIXME : not the right way to set supported flag
usbvision_v4l2_format[6].supported = 0; // V4L2_PIX_FMT_YVU420
usbvision_v4l2_format[7].supported = 0; // V4L2_PIX_FMT_YUV422P
- }
+ }
customdevice_process();
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff