Move update() and sync() from omap_dss_device to omap_dss_driver.
Also, update was hardcoded to use virtual channel 0. This patch adds a
parameter that specifies the VC.
This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
struct omap_video_timings *timings);
void (*get_timings)(struct omap_dss_device *dssdev,
struct omap_video_timings *timings);
- int (*update)(struct omap_dss_device *dssdev,
- u16 x, u16 y, u16 w, u16 h);
- int (*sync)(struct omap_dss_device *dssdev);
int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
u32 (*get_wss)(struct omap_dss_device *dssdev);
int (*resume)(struct omap_dss_device *display);
int (*run_test)(struct omap_dss_device *display, int test);
- void (*setup_update)(struct omap_dss_device *dssdev,
- u16 x, u16 y, u16 w, u16 h);
int (*set_update_mode)(struct omap_dss_device *dssdev,
enum omap_dss_update_mode);
enum omap_dss_update_mode (*get_update_mode)(
struct omap_dss_device *dssdev);
+ int (*update)(struct omap_dss_device *dssdev,
+ u16 x, u16 y, u16 w, u16 h);
+ int (*sync)(struct omap_dss_device *dssdev);
+
int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
- int (*wait_for_te)(struct omap_dss_device *dssdev);
int (*get_te)(struct omap_dss_device *dssdev);
u8 (*get_rotate)(struct omap_dss_device *dssdev);
void omapdss_dsi_vc_enable_hs(int channel, bool enable);
int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable);
+int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
+ u16 *x, u16 *y, u16 *w, u16 *h);
+int omap_dsi_update(struct omap_dss_device *dssdev,
+ int channel,
+ u16 x, u16 y, u16 w, u16 h,
+ void (*callback)(int, void *), void *data);
+
+int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
+ u16 *x, u16 *y, u16 *w, u16 *h);
+int omap_rfbi_update(struct omap_dss_device *dssdev,
+ u16 x, u16 y, u16 w, u16 h,
+ void (*callback)(void *), void *data);
+
+
#endif
return 0;
}
-static void taal_setup_update(struct omap_dss_device *dssdev,
+static void taal_framedone_cb(int err, void *data)
+{
+ struct omap_dss_device *dssdev = data;
+ dev_dbg(&dssdev->dev, "framedone, err %d\n", err);
+ dsi_bus_unlock();
+}
+
+static int taal_update(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h)
{
- taal_set_update_window(x, y, w, h);
+ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+ int r;
+
+ dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
+
+ dsi_bus_lock();
+
+ if (!td->enabled) {
+ r = 0;
+ goto err;
+ }
+
+ r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h);
+ if (r)
+ goto err;
+
+ r = taal_set_update_window(x, y, w, h);
+ if (r)
+ goto err;
+
+ r = omap_dsi_update(dssdev, TCH, x, y, w, h,
+ taal_framedone_cb, dssdev);
+ if (r)
+ goto err;
+
+ /* note: no bus_unlock here. unlock is in framedone_cb */
+ return 0;
+err:
+ dsi_bus_unlock();
+ return r;
+}
+
+static int taal_sync(struct omap_dss_device *dssdev)
+{
+ dev_dbg(&dssdev->dev, "sync\n");
+
+ dsi_bus_lock();
+ dsi_bus_unlock();
+
+ dev_dbg(&dssdev->dev, "sync done\n");
+
+ return 0;
}
static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
return td->te_enabled;
}
-static int taal_wait_te(struct omap_dss_device *dssdev)
-{
- struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- long wait = msecs_to_jiffies(500);
-
- if (!td->use_ext_te || !td->te_enabled)
- return 0;
-
- INIT_COMPLETION(td->te_completion);
- wait = wait_for_completion_timeout(&td->te_completion, wait);
- if (wait == 0) {
- dev_err(&dssdev->dev, "timeout waiting TE\n");
- return -ETIME;
- }
-
- return 0;
-}
-
static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
.suspend = taal_suspend,
.resume = taal_resume,
- .setup_update = taal_setup_update,
.set_update_mode = taal_set_update_mode,
.get_update_mode = taal_get_update_mode,
+
+ .update = taal_update,
+ .sync = taal_sync,
+
.get_resolution = taal_get_resolution,
.get_recommended_bpp = omapdss_default_get_recommended_bpp,
.enable_te = taal_enable_te,
.get_te = taal_get_te,
- .wait_for_te = taal_wait_te,
.set_rotate = taal_rotate,
.get_rotate = taal_get_rotate,
#include <linux/seq_file.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
-#include <linux/kthread.h>
#include <linux/wait.h>
+#include <linux/workqueue.h>
#include <plat/display.h>
#include <plat/clock.h>
};
struct dsi_update_region {
- bool dirty;
u16 x, y, w, h;
struct omap_dss_device *device;
};
struct completion bta_completion;
- struct task_struct *thread;
- wait_queue_head_t waitqueue;
-
- spinlock_t update_lock;
- bool framedone_received;
+ int update_channel;
struct dsi_update_region update_region;
- struct dsi_update_region active_update_region;
- struct completion update_completion;
bool te_enabled;
bool use_ext_te;
+ struct work_struct framedone_work;
+ void (*framedone_callback)(int, void *);
+ void *framedone_data;
+
+ struct delayed_work framedone_timeout_work;
+
#ifdef DSI_CATCH_MISSING_TE
struct timer_list te_timer;
#endif
total_us = setup_us + trans_us;
- total_bytes = dsi.active_update_region.w *
- dsi.active_update_region.h *
- dsi.active_update_region.device->ctrl.pixel_size / 8;
+ total_bytes = dsi.update_region.w *
+ dsi.update_region.h *
+ dsi.update_region.device->ctrl.pixel_size / 8;
printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), "
"%u bytes, %u kbytes/sec\n",
unsigned packet_len;
u32 l;
bool use_te_trigger;
- const unsigned channel = 0;
+ const unsigned channel = dsi.update_channel;
/* line buffer is 1024 x 24bits */
/* XXX: for some reason using full buffer size causes considerable TX
* slowdown with update sizes that fill the whole buffer */
DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n",
x, y, w, h);
+ dsi_vc_config_vp(channel);
+
bytespp = dssdev->ctrl.pixel_size / 8;
bytespl = w * bytespp;
bytespf = bytespl * h;
*/
dispc_disable_sidle();
+ dsi_perf_mark_start();
+
+ schedule_delayed_work(&dsi.framedone_timeout_work,
+ msecs_to_jiffies(250));
+
dss_start_update(dssdev);
if (use_te_trigger) {
}
#endif
-static void dsi_framedone_irq_callback(void *data, u32 mask)
+static void dsi_framedone_timeout_work_callback(struct work_struct *work)
{
- /* Note: We get FRAMEDONE when DISPC has finished sending pixels and
- * turns itself off. However, DSI still has the pixels in its buffers,
- * and is sending the data.
- */
+ int r;
+ const int channel = dsi.update_channel;
+ bool use_te_trigger;
+
+ DSSERR("Framedone not received for 250ms!\n");
/* SIDLEMODE back to smart-idle */
dispc_enable_sidle();
- dsi.framedone_received = true;
- wake_up(&dsi.waitqueue);
-}
+ use_te_trigger = dsi.te_enabled && !dsi.use_ext_te;
-static void dsi_set_update_region(struct omap_dss_device *dssdev,
- u16 x, u16 y, u16 w, u16 h)
-{
- spin_lock(&dsi.update_lock);
- if (dsi.update_region.dirty) {
- dsi.update_region.x = min(x, dsi.update_region.x);
- dsi.update_region.y = min(y, dsi.update_region.y);
- dsi.update_region.w = max(w, dsi.update_region.w);
- dsi.update_region.h = max(h, dsi.update_region.h);
- } else {
- dsi.update_region.x = x;
- dsi.update_region.y = y;
- dsi.update_region.w = w;
- dsi.update_region.h = h;
+ if (use_te_trigger) {
+ /* enable LP_RX_TO again after the TE */
+ REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
}
- dsi.update_region.device = dssdev;
- dsi.update_region.dirty = true;
+ /* Send BTA after the frame. We need this for the TE to work, as TE
+ * trigger is only sent for BTAs without preceding packet. Thus we need
+ * to BTA after the pixel packets so that next BTA will cause TE
+ * trigger.
+ *
+ * This is not needed when TE is not in use, but we do it anyway to
+ * make sure that the transfer has been completed. It would be more
+ * optimal, but more complex, to wait only just before starting next
+ * transfer. */
+ r = dsi_vc_send_bta_sync(channel);
+ if (r)
+ DSSERR("BTA after framedone failed\n");
+
+ /* RX_FIFO_NOT_EMPTY */
+ if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
+ DSSERR("Received error during frame transfer:\n");
+ dsi_vc_flush_receive_data(channel);
+ }
+
+ dsi.framedone_callback(-ETIMEDOUT, dsi.framedone_data);
+}
- spin_unlock(&dsi.update_lock);
+static void dsi_framedone_irq_callback(void *data, u32 mask)
+{
+ /* Note: We get FRAMEDONE when DISPC has finished sending pixels and
+ * turns itself off. However, DSI still has the pixels in its buffers,
+ * and is sending the data.
+ */
+
+ /* SIDLEMODE back to smart-idle */
+ dispc_enable_sidle();
+ schedule_work(&dsi.framedone_work);
}
static void dsi_handle_framedone(void)
{
int r;
- const int channel = 0;
+ const int channel = dsi.update_channel;
bool use_te_trigger;
use_te_trigger = dsi.te_enabled && !dsi.use_ext_te;
#endif
}
-static int dsi_update_thread(void *data)
+static void dsi_framedone_work_callback(struct work_struct *work)
{
- unsigned long timeout;
- struct omap_dss_device *device;
- u16 x, y, w, h;
-
- while (1) {
- wait_event_interruptible(dsi.waitqueue,
- dsi.update_region.dirty == true ||
- kthread_should_stop());
-
- if (kthread_should_stop())
- break;
-
- dsi_bus_lock();
-
- if (kthread_should_stop()) {
- dsi_bus_unlock();
- break;
- }
+ DSSDBGF();
- dsi_perf_mark_setup();
+ cancel_delayed_work_sync(&dsi.framedone_timeout_work);
- if (dsi.update_region.dirty) {
- spin_lock(&dsi.update_lock);
- dsi.active_update_region = dsi.update_region;
- dsi.update_region.dirty = false;
- spin_unlock(&dsi.update_lock);
- }
+ dsi_handle_framedone();
- device = dsi.active_update_region.device;
- x = dsi.active_update_region.x;
- y = dsi.active_update_region.y;
- w = dsi.active_update_region.w;
- h = dsi.active_update_region.h;
+ dsi_perf_show("DISPC");
- if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+ dsi.framedone_callback(0, dsi.framedone_data);
+}
- dss_setup_partial_planes(device,
- &x, &y, &w, &h);
+int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
+ u16 *x, u16 *y, u16 *w, u16 *h)
+{
+ u16 dw, dh;
- dispc_set_lcd_size(w, h);
- }
+ dssdev->driver->get_resolution(dssdev, &dw, &dh);
- if (dsi.active_update_region.dirty) {
- dsi.active_update_region.dirty = false;
- /* XXX TODO we don't need to send the coords, if they
- * are the same that are already programmed to the
- * panel. That should speed up manual update a bit */
- device->driver->setup_update(device, x, y, w, h);
- }
+ if (*x > dw || *y > dh)
+ return -EINVAL;
- dsi_perf_mark_start();
+ if (*x + *w > dw)
+ return -EINVAL;
- if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
- dsi_vc_config_vp(0);
+ if (*y + *h > dh)
+ return -EINVAL;
- if (dsi.te_enabled && dsi.use_ext_te)
- device->driver->wait_for_te(device);
+ if (*w == 1)
+ return -EINVAL;
- dsi.framedone_received = false;
+ if (*w == 0 || *h == 0)
+ return -EINVAL;
- dsi_update_screen_dispc(device, x, y, w, h);
+ dsi_perf_mark_setup();
- /* wait for framedone */
- timeout = msecs_to_jiffies(1000);
- wait_event_timeout(dsi.waitqueue,
- dsi.framedone_received == true,
- timeout);
+ if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+ dss_setup_partial_planes(dssdev, x, y, w, h);
+ dispc_set_lcd_size(*w, *h);
+ }
- if (!dsi.framedone_received) {
- DSSERR("framedone timeout\n");
- DSSERR("failed update %d,%d %dx%d\n",
- x, y, w, h);
+ return 0;
+}
+EXPORT_SYMBOL(omap_dsi_prepare_update);
- dispc_enable_sidle();
- device->manager->disable(device->manager);
+int omap_dsi_update(struct omap_dss_device *dssdev,
+ int channel,
+ u16 x, u16 y, u16 w, u16 h,
+ void (*callback)(int, void *), void *data)
+{
+ dsi.update_channel = channel;
- dsi_reset_tx_fifo(0);
- } else {
- dsi_handle_framedone();
- dsi_perf_show("DISPC");
- }
- } else {
- dsi_update_screen_l4(device, x, y, w, h);
- dsi_perf_show("L4");
- }
+ if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+ dsi.framedone_callback = callback;
+ dsi.framedone_data = data;
- complete_all(&dsi.update_completion);
+ dsi.update_region.x = x;
+ dsi.update_region.y = y;
+ dsi.update_region.w = w;
+ dsi.update_region.h = h;
+ dsi.update_region.device = dssdev;
- dsi_bus_unlock();
+ dsi_update_screen_dispc(dssdev, x, y, w, h);
+ } else {
+ dsi_update_screen_l4(dssdev, x, y, w, h);
+ dsi_perf_show("L4");
+ callback(0, data);
}
- DSSDBG("update thread exiting\n");
-
return 0;
}
-
-
+EXPORT_SYMBOL(omap_dsi_update);
/* Display funcs */
return r;
}
-static int dsi_display_update(struct omap_dss_device *dssdev,
- u16 x, u16 y, u16 w, u16 h)
-{
- int r = 0;
- u16 dw, dh;
-
- DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h);
-
- mutex_lock(&dsi.lock);
-
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
- goto end;
-
- dssdev->driver->get_resolution(dssdev, &dw, &dh);
-
- if (x > dw || y > dh)
- goto end;
-
- if (x + w > dw)
- w = dw - x;
-
- if (y + h > dh)
- h = dh - y;
-
- if (w == 0 || h == 0)
- goto end;
-
- if (w == 1) {
- r = -EINVAL;
- goto end;
- }
-
- dsi_set_update_region(dssdev, x, y, w, h);
-
- wake_up(&dsi.waitqueue);
-
-end:
- mutex_unlock(&dsi.lock);
-
- return r;
-}
-
-static int dsi_display_sync(struct omap_dss_device *dssdev)
-{
- bool wait;
-
- DSSDBG("dsi_display_sync()\n");
-
- mutex_lock(&dsi.lock);
- dsi_bus_lock();
-
- if (dsi.update_region.dirty) {
- INIT_COMPLETION(dsi.update_completion);
- wait = true;
- } else {
- wait = false;
- }
-
- dsi_bus_unlock();
- mutex_unlock(&dsi.lock);
-
- if (wait)
- wait_for_completion_interruptible(&dsi.update_completion);
-
- DSSDBG("dsi_display_sync() done\n");
- return 0;
-}
-
int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
{
dsi.te_enabled = enable;
dssdev->disable = dsi_display_disable;
dssdev->suspend = dsi_display_suspend;
dssdev->resume = dsi_display_resume;
- dssdev->update = dsi_display_update;
- dssdev->sync = dsi_display_sync;
/* XXX these should be figured out dynamically */
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
{
u32 rev;
int r;
- struct sched_param param = {
- .sched_priority = MAX_USER_RT_PRIO-1
- };
spin_lock_init(&dsi.errors_lock);
dsi.errors = 0;
#endif
init_completion(&dsi.bta_completion);
- init_completion(&dsi.update_completion);
-
- dsi.thread = kthread_create(dsi_update_thread, NULL, "dsi");
- if (IS_ERR(dsi.thread)) {
- DSSERR("cannot create kthread\n");
- r = PTR_ERR(dsi.thread);
- goto err0;
- }
- sched_setscheduler(dsi.thread, SCHED_FIFO, ¶m);
-
- init_waitqueue_head(&dsi.waitqueue);
- spin_lock_init(&dsi.update_lock);
mutex_init(&dsi.lock);
sema_init(&dsi.bus_lock, 1);
+ INIT_WORK(&dsi.framedone_work, dsi_framedone_work_callback);
+ INIT_DELAYED_WORK_DEFERRABLE(&dsi.framedone_timeout_work,
+ dsi_framedone_timeout_work_callback);
+
#ifdef DSI_CATCH_MISSING_TE
init_timer(&dsi.te_timer);
dsi.te_timer.function = dsi_te_timeout;
dsi.te_timer.data = 0;
#endif
-
dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS);
if (!dsi.base) {
DSSERR("can't ioremap DSI\n");
enable_clocks(0);
- wake_up_process(dsi.thread);
-
return 0;
err2:
iounmap(dsi.base);
err1:
- kthread_stop(dsi.thread);
-err0:
return r;
}
void dsi_exit(void)
{
- kthread_stop(dsi.thread);
-
iounmap(dsi.base);
DSSDBG("omap_dsi_exit\n");
#include <plat/display.h>
#include "dss.h"
-/*#define MEASURE_PERF*/
-
#define RFBI_BASE 0x48050800
struct rfbi_reg { u16 idx; };
#define RFBI_VSYNC_WIDTH RFBI_REG(0x0090)
#define RFBI_HSYNC_WIDTH RFBI_REG(0x0094)
-#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param))
-
#define REG_FLD_MOD(idx, val, start, end) \
rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end))
static int rfbi_convert_timings(struct rfbi_timings *t);
static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div);
-static void process_cmd_fifo(void);
static struct {
void __iomem *base;
struct completion cmd_done;
atomic_t cmd_fifo_full;
atomic_t cmd_pending;
-#ifdef MEASURE_PERF
- unsigned perf_bytes;
- ktime_t perf_setup_time;
- ktime_t perf_start_time;
-#endif
} rfbi;
struct update_region {
u16 h;
};
-struct update_param {
- u8 rfbi_module;
- u8 cmd;
-
- union {
- struct update_region r;
- struct completion *sync;
- } par;
-};
-
static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
{
__raw_writel(val, rfbi.base + idx.idx);
}
EXPORT_SYMBOL(omap_rfbi_write_pixels);
-#ifdef MEASURE_PERF
-static void perf_mark_setup(void)
-{
- rfbi.perf_setup_time = ktime_get();
-}
-
-static void perf_mark_start(void)
-{
- rfbi.perf_start_time = ktime_get();
-}
-
-static void perf_show(const char *name)
-{
- ktime_t t, setup_time, trans_time;
- u32 total_bytes;
- u32 setup_us, trans_us, total_us;
-
- t = ktime_get();
-
- setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time);
- setup_us = (u32)ktime_to_us(setup_time);
- if (setup_us == 0)
- setup_us = 1;
-
- trans_time = ktime_sub(t, rfbi.perf_start_time);
- trans_us = (u32)ktime_to_us(trans_time);
- if (trans_us == 0)
- trans_us = 1;
-
- total_us = setup_us + trans_us;
-
- total_bytes = rfbi.perf_bytes;
-
- DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, "
- "%u kbytes/sec\n",
- name,
- setup_us,
- trans_us,
- total_us,
- 1000*1000 / total_us,
- total_bytes,
- total_bytes * 1000 / total_us);
-}
-#else
-#define perf_mark_setup()
-#define perf_mark_start()
-#define perf_show(x)
-#endif
-
void rfbi_transfer_area(u16 width, u16 height,
void (callback)(void *data), void *data)
{
if (!rfbi.te_enabled)
l = FLD_MOD(l, 1, 4, 4); /* ITE */
- perf_mark_start();
-
rfbi_write_reg(RFBI_CONTROL, l);
}
DSSDBG("FRAMEDONE\n");
- perf_show("DISPC");
-
REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0);
rfbi_enable_clocks(0);
callback = rfbi.framedone_callback;
rfbi.framedone_callback = NULL;
- /*callback(rfbi.framedone_callback_data);*/
+ if (callback != NULL)
+ callback(rfbi.framedone_callback_data);
atomic_set(&rfbi.cmd_pending, 0);
-
- process_cmd_fifo();
}
#if 1 /* VERBOSE */
}
EXPORT_SYMBOL(rfbi_configure);
-static int rfbi_find_display(struct omap_dss_device *dssdev)
+int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
+ u16 *x, u16 *y, u16 *w, u16 *h)
{
- if (dssdev == rfbi.dssdev[0])
- return 0;
+ u16 dw, dh;
- if (dssdev == rfbi.dssdev[1])
- return 1;
+ dssdev->driver->get_resolution(dssdev, &dw, &dh);
- BUG();
- return -1;
-}
+ if (*x > dw || *y > dh)
+ return -EINVAL;
+ if (*x + *w > dw)
+ return -EINVAL;
-static void signal_fifo_waiters(void)
-{
- if (atomic_read(&rfbi.cmd_fifo_full) > 0) {
- /* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */
- complete(&rfbi.cmd_done);
- atomic_dec(&rfbi.cmd_fifo_full);
- }
-}
+ if (*y + *h > dh)
+ return -EINVAL;
-/* returns 1 for async op, and 0 for sync op */
-static int do_update(struct omap_dss_device *dssdev, struct update_region *upd)
-{
- u16 x = upd->x;
- u16 y = upd->y;
- u16 w = upd->w;
- u16 h = upd->h;
+ if (*w == 1)
+ return -EINVAL;
- perf_mark_setup();
+ if (*w == 0 || *h == 0)
+ return -EINVAL;
if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
- /*dssdev->driver->enable_te(dssdev, 1); */
- dss_setup_partial_planes(dssdev, &x, &y, &w, &h);
+ dss_setup_partial_planes(dssdev, x, y, w, h);
+ dispc_set_lcd_size(*w, *h);
}
-#ifdef MEASURE_PERF
- rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */
-#endif
-
- dssdev->driver->setup_update(dssdev, x, y, w, h);
+ return 0;
+}
+EXPORT_SYMBOL(omap_rfbi_prepare_update);
+int omap_rfbi_update(struct omap_dss_device *dssdev,
+ u16 x, u16 y, u16 w, u16 h,
+ void (*callback)(void *), void *data)
+{
if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
- rfbi_transfer_area(w, h, NULL, NULL);
- return 1;
+ rfbi_transfer_area(w, h, callback, data);
} else {
struct omap_overlay *ovl;
void __iomem *addr;
omap_rfbi_write_pixels(addr, scr_width, x, y, w, h);
- perf_show("L4");
-
- return 0;
- }
-}
-
-static void process_cmd_fifo(void)
-{
- int len;
- struct update_param p;
- struct omap_dss_device *dssdev;
- unsigned long flags;
-
- if (atomic_inc_return(&rfbi.cmd_pending) != 1)
- return;
-
- while (true) {
- spin_lock_irqsave(&rfbi.cmd_lock, flags);
-
- len = kfifo_out(&rfbi.cmd_fifo, (unsigned char *)&p,
- sizeof(struct update_param));
- if (len == 0) {
- DSSDBG("nothing more in fifo\n");
- atomic_set(&rfbi.cmd_pending, 0);
- spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
- break;
- }
-
- /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/
-
- spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
-
- BUG_ON(len != sizeof(struct update_param));
- BUG_ON(p.rfbi_module > 1);
-
- dssdev = rfbi.dssdev[p.rfbi_module];
-
- if (p.cmd == RFBI_CMD_UPDATE) {
- if (do_update(dssdev, &p.par.r))
- break; /* async op */
- } else if (p.cmd == RFBI_CMD_SYNC) {
- DSSDBG("Signaling SYNC done!\n");
- complete(p.par.sync);
- } else
- BUG();
+ callback(data);
}
- signal_fifo_waiters();
-}
-
-static void rfbi_push_cmd(struct update_param *p)
-{
- int ret;
-
- while (1) {
- unsigned long flags;
- int available;
-
- spin_lock_irqsave(&rfbi.cmd_lock, flags);
- available = RFBI_CMD_FIFO_LEN_BYTES -
- kfifo_len(&rfbi.cmd_fifo);
-
-/* DSSDBG("%d bytes left in fifo\n", available); */
- if (available < sizeof(struct update_param)) {
- DSSDBG("Going to wait because FIFO FULL..\n");
- spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
- atomic_inc(&rfbi.cmd_fifo_full);
- wait_for_completion(&rfbi.cmd_done);
- /*DSSDBG("Woke up because fifo not full anymore\n");*/
- continue;
- }
-
- ret = kfifo_in(&rfbi.cmd_fifo, (unsigned char *)p,
- sizeof(struct update_param));
-/* DSSDBG("pushed %d bytes\n", ret);*/
-
- spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
-
- BUG_ON(ret != sizeof(struct update_param));
-
- break;
- }
-}
-
-static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h)
-{
- struct update_param p;
-
- p.rfbi_module = rfbi_module;
- p.cmd = RFBI_CMD_UPDATE;
-
- p.par.r.x = x;
- p.par.r.y = y;
- p.par.r.w = w;
- p.par.r.h = h;
-
- DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h);
-
- rfbi_push_cmd(&p);
-
- process_cmd_fifo();
-}
-
-static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp)
-{
- struct update_param p;
-
- p.rfbi_module = rfbi_module;
- p.cmd = RFBI_CMD_SYNC;
- p.par.sync = sync_comp;
-
- rfbi_push_cmd(&p);
-
- DSSDBG("RFBI sync pushed to cmd fifo\n");
-
- process_cmd_fifo();
+ return 0;
}
+EXPORT_SYMBOL(omap_rfbi_update);
void rfbi_dump_regs(struct seq_file *s)
{
{
u32 rev;
u32 l;
- int r;
spin_lock_init(&rfbi.cmd_lock);
- r = kfifo_alloc(&rfbi.cmd_fifo, RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL);
- if (r)
- return r;
init_completion(&rfbi.cmd_done);
atomic_set(&rfbi.cmd_fifo_full, 0);
{
DSSDBG("rfbi_exit\n");
- kfifo_free(&rfbi.cmd_fifo);
-
iounmap(rfbi.base);
}
/* struct omap_display support */
-static int rfbi_display_update(struct omap_dss_device *dssdev,
- u16 x, u16 y, u16 w, u16 h)
-{
- int rfbi_module;
-
- if (w == 0 || h == 0)
- return 0;
-
- rfbi_module = rfbi_find_display(dssdev);
-
- rfbi_push_update(rfbi_module, x, y, w, h);
-
- return 0;
-}
-
-static int rfbi_display_sync(struct omap_dss_device *dssdev)
-{
- struct completion sync_comp;
- int rfbi_module;
-
- rfbi_module = rfbi_find_display(dssdev);
-
- init_completion(&sync_comp);
- rfbi_push_sync(rfbi_module, &sync_comp);
- DSSDBG("Waiting for SYNC to happen...\n");
- wait_for_completion(&sync_comp);
- DSSDBG("Released from SYNC\n");
- return 0;
-}
-
static int rfbi_display_enable(struct omap_dss_device *dssdev)
{
int r;
{
dssdev->enable = rfbi_display_enable;
dssdev->disable = rfbi_display_disable;
- dssdev->update = rfbi_display_update;
- dssdev->sync = rfbi_display_sync;
rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev;
if (x + w > dw || y + h > dh)
return -EINVAL;
- return display->update(display, x, y, w, h);
+ return display->driver->update(display, x, y, w, h);
}
/* This function is exported for SGX driver use */
switch (cmd) {
case OMAPFB_SYNC_GFX:
DBG("ioctl SYNC_GFX\n");
- if (!display || !display->sync) {
+ if (!display || !display->driver->sync) {
/* DSS1 never returns an error here, so we neither */
/*r = -EINVAL;*/
break;
}
- r = display->sync(display);
+ r = display->driver->sync(display);
break;
case OMAPFB_UPDATE_WINDOW_OLD:
DBG("ioctl UPDATE_WINDOW_OLD\n");
- if (!display || !display->update) {
+ if (!display || !display->driver->update) {
r = -EINVAL;
break;
}
case OMAPFB_UPDATE_WINDOW:
DBG("ioctl UPDATE_WINDOW\n");
- if (!display || !display->update) {
+ if (!display || !display->driver->update) {
r = -EINVAL;
break;
}
exit:
omapfb_unlock(fbdev);
- if (r == 0 && do_update && display->update) {
+ if (r == 0 && do_update && display->driver->update) {
u16 w, h;
display->driver->get_resolution(display, &w, &h);
- r = display->update(display, 0, 0, w, h);
+ r = display->driver->update(display, 0, 0, w, h);
}
return r;
if (old_size == size && old_type == type)
return 0;
- if (display && display->sync)
- display->sync(display);
+ if (display && display->driver->sync)
+ display->driver->sync(display);
omapfb_free_fbmem(fbi);
dssdrv->get_resolution(def_display,
&w, &h);
- def_display->update(def_display, 0, 0, w, h);
+ def_display->driver->update(def_display, 0, 0, w, h);
#endif
} else {
if (dssdrv->set_update_mode)
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff