staging: comedi: usbduxfast: use attach_usb() hook

Change the usbduxfast driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 2ee9ecd33539f1db7d3f36fb01fdcbaa24fa942f..c71362086cdff8b290acdcf0c0ac38e72500723e 100644 (file)
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -1619,64 +1619,28 @@ static void usbduxfastsub_disconnect(struct usb_interface *intf)
 #endif
 }
 
-/*
- * is called when comedi-config is called
- */
-static int usbduxfast_attach(struct comedi_device *dev,
-                            struct comedi_devconfig *it)
+/* common part of attach and attach_usb */
+static int usbduxfast_attach_common(struct comedi_device *dev,
+                                   struct usbduxfastsub_s *udfs,
+                                   void *aux_data, int aux_len)
 {
        int ret;
-       int index;
-       int i;
-       struct comedi_subdevice *s = NULL;
-       dev->private = NULL;
-
-       down(&start_stop_sem);
-       /*
-        * find a valid device which has been detected by the
-        * probe function of the usb
-        */
-       index = -1;
-       for (i = 0; i < NUMUSBDUXFAST; i++) {
-               if (usbduxfastsub[i].probed && !usbduxfastsub[i].attached) {
-                       index = i;
-                       break;
-               }
-       }
-
-       if (index < 0) {
-               printk(KERN_ERR "comedi%d: usbduxfast: error: attach failed, "
-                      "no usbduxfast devs connected to the usb bus.\n",
-                      dev->minor);
-               up(&start_stop_sem);
-               return -ENODEV;
-       }
+       struct comedi_subdevice *s;
 
-       down(&(usbduxfastsub[index].sem));
+       down(&udfs->sem);
        /* pointer back to the corresponding comedi device */
-       usbduxfastsub[index].comedidev = dev;
-
+       udfs->comedidev = dev;
        /* trying to upload the firmware into the chip */
-       if (comedi_aux_data(it->options, 0) &&
-           it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]) {
-               firmwareUpload(&usbduxfastsub[index],
-                              comedi_aux_data(it->options, 0),
-                              it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]);
-       }
-
+       if (aux_data)
+               firmwareUpload(udfs, aux_data, aux_len);
        dev->board_name = BOARDNAME;
-
        ret = comedi_alloc_subdevices(dev, 1);
        if (ret) {
-               up(&(usbduxfastsub[index].sem));
-               up(&start_stop_sem);
+               up(&udfs->sem);
                return ret;
        }
-
-       printk(KERN_INFO "comedi%d: usbduxfast: usb-device %d is attached to "
-              "comedi.\n", dev->minor, index);
        /* private structure is also simply the usb-structure */
-       dev->private = usbduxfastsub + index;
+       dev->private = udfs;
        /* the first subdevice is the A/D converter */
        s = dev->subdevices + SUBDEV_AD;
        /*
@@ -1703,16 +1667,76 @@ static int usbduxfast_attach(struct comedi_device *dev,
        s->maxdata = 0x1000;
        /* range table to convert to physical units */
        s->range_table = &range_usbduxfast_ai_range;
-
        /* finally decide that it's attached */
-       usbduxfastsub[index].attached = 1;
+       udfs->attached = 1;
+       up(&udfs->sem);
+       dev_info(dev->class_dev, "successfully attached to usbduxfast.\n");
+       return 0;
+}
+
+/* is called for COMEDI_DEVCONFIG ioctl (when comedi_config is run) */
+static int usbduxfast_attach(struct comedi_device *dev,
+                            struct comedi_devconfig *it)
+{
+       int ret;
+       int index;
+       int i;
+       void *aux_data;
+       int aux_len;
 
-       up(&(usbduxfastsub[index].sem));
+       dev->private = NULL;
+
+       aux_data = comedi_aux_data(it->options, 0);
+       aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH];
+       if (aux_data == NULL)
+               aux_len = 0;
+       else if (aux_len == 0)
+               aux_data = NULL;
+       down(&start_stop_sem);
+       /*
+        * find a valid device which has been detected by the
+        * probe function of the usb
+        */
+       index = -1;
+       for (i = 0; i < NUMUSBDUXFAST; i++) {
+               if (usbduxfastsub[i].probed && !usbduxfastsub[i].attached) {
+                       index = i;
+                       break;
+               }
+       }
+       if (index < 0) {
+               dev_err(dev->class_dev,
+                       "usbduxfast: error: attach failed, no usbduxfast devs connected to the usb bus.\n");
+               ret = -ENODEV;
+       } else
+               ret = usbduxfast_attach_common(dev, &usbduxfastsub[index],
+                                              aux_data, aux_len);
        up(&start_stop_sem);
-       printk(KERN_INFO "comedi%d: successfully attached to usbduxfast.\n",
-              dev->minor);
+       return ret;
+}
 
-       return 0;
+/* is called from comedi_usb_auto_config() */
+static int usbduxfast_attach_usb(struct comedi_device *dev,
+                                struct usb_interface *uinterf)
+{
+       int ret;
+       struct usbduxfastsub_s *udfs;
+
+       dev->private = NULL;
+       down(&start_stop_sem);
+       udfs = usb_get_intfdata(uinterf);
+       if (!udfs || !udfs->probed) {
+               dev_err(dev->class_dev,
+                       "usbduxfast: error: attach_usb failed, not connected\n");
+               ret = -ENODEV;
+       } else if (udfs->attached) {
+               dev_err(dev->class_dev,
+                      "usbduxfast: error: attach_usb failed, already attached\n");
+               ret = -ENODEV;
+       } else
+               ret = usbduxfast_attach_common(dev, udfs, NULL, 0);
+       up(&start_stop_sem);
+       return ret;
 }
 
 static void usbduxfast_detach(struct comedi_device *dev)
@@ -1737,7 +1761,8 @@ static struct comedi_driver driver_usbduxfast = {
        .driver_name = "usbduxfast",
        .module = THIS_MODULE,
        .attach = usbduxfast_attach,
-       .detach = usbduxfast_detach
+       .detach = usbduxfast_detach,
+       .attach_usb = usbduxfast_attach_usb,
 };
 
 /*