PCI: Run k8t_sound_hostbridge quirk only when needed

The k8t_sound_hostbridge PCI quick fires on my motherboard (Jetway
K8M8MS) while it shouldn't: the on-board sound chip is not disabled
and is working just fine. Looking at the code, I see that we are
running the quirk for two distinct register values (0x88 and 0xc8)
and then clear bit 6 (0x40). However value 0x88 already has bit 6
cleared so this is a no-op. This is what happens on my board. Thus I
believe that the quirk should only be run for register value 0xc8.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 31f680f238c8a8b021ec9a677ed471a54eeab009..2d40f437b9fc14424b5c50dcf13983a466703d11 100644 (file)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -947,7 +947,7 @@ static void k8t_sound_hostbridge(struct pci_dev *dev)
        unsigned char val;
 
        pci_read_config_byte(dev, 0x50, &val);
-       if (val == 0x88 || val == 0xc8) {
+       if (val == 0xc8) {
                /* Assume it's probably a MSI-K8T-Neo2Fir */
                printk(KERN_INFO "PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON\n");
                pci_write_config_byte(dev, 0x50, val & (~0x40));