ARM: imx: Remove cpufreq driver
authorMarkus Pargmann <mpa@pengutronix.de>
Wed, 27 Mar 2013 13:01:34 +0000 (14:01 +0100)
committerShawn Guo <shawn.guo@linaro.org>
Mon, 1 Apr 2013 08:17:34 +0000 (16:17 +0800)
The old cpufreq driver is not necessary anymore with DT and
cpufreq-cpu0.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
arch/arm/Kconfig
arch/arm/mach-imx/Makefile
arch/arm/mach-imx/cpu_op-mx51.c [deleted file]
arch/arm/mach-imx/cpu_op-mx51.h [deleted file]
arch/arm/mach-imx/cpufreq.c [deleted file]
arch/arm/mach-imx/mach-cpuimx51sd.c
arch/arm/mach-imx/mach-mx51_babbage.c

index 13b739469c515cb93a8dff1cdf686583a3941c54..c5ed84c2bdda7c805d417660c1fb98d82603d1b3 100644 (file)
@@ -2153,13 +2153,6 @@ if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
-config CPU_FREQ_IMX
-       tristate "CPUfreq driver for i.MX CPUs"
-       depends on ARCH_MXC && CPU_FREQ
-       select CPU_FREQ_TABLE
-       help
-         This enables the CPUfreq driver for i.MX CPUs.
-
 config CPU_FREQ_SA1100
        bool
 
index c4ce0906d76a557f36632789526abf9d03efb8b7..23555b0c08a9f08a442bf8770caa1a5d1be72b2a 100644 (file)
@@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
 imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
                            clk-pfd.o clk-busy.o clk.o
@@ -27,7 +27,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
 
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-y += cpuidle.o
diff --git a/arch/arm/mach-imx/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c
deleted file mode 100644 (file)
index b9ef692..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/bug.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include "hardware.h"
-
-static struct cpu_op mx51_cpu_op[] = {
-       {
-       .cpu_rate = 160000000,},
-       {
-       .cpu_rate = 800000000,},
-};
-
-struct cpu_op *mx51_get_cpu_op(int *op)
-{
-       *op = ARRAY_SIZE(mx51_cpu_op);
-       return mx51_cpu_op;
-}
diff --git a/arch/arm/mach-imx/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h
deleted file mode 100644 (file)
index 97477fe..0000000
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-extern struct cpu_op *mx51_get_cpu_op(int *op);
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
deleted file mode 100644 (file)
index d8c75c3..0000000
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * A driver for the Freescale Semiconductor i.MXC CPUfreq module.
- * The CPUFREQ driver is for controlling CPU frequency. It allows you to change
- * the CPU clock speed on the fly.
- */
-
-#include <linux/module.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include "hardware.h"
-
-#define CLK32_FREQ     32768
-#define NANOSECOND     (1000 * 1000 * 1000)
-
-struct cpu_op *(*get_cpu_op)(int *op);
-
-static int cpu_freq_khz_min;
-static int cpu_freq_khz_max;
-
-static struct clk *cpu_clk;
-static struct cpufreq_frequency_table *imx_freq_table;
-
-static int cpu_op_nr;
-static struct cpu_op *cpu_op_tbl;
-
-static int set_cpu_freq(int freq)
-{
-       int ret = 0;
-       int org_cpu_rate;
-
-       org_cpu_rate = clk_get_rate(cpu_clk);
-       if (org_cpu_rate == freq)
-               return ret;
-
-       ret = clk_set_rate(cpu_clk, freq);
-       if (ret != 0) {
-               printk(KERN_DEBUG "cannot set CPU clock rate\n");
-               return ret;
-       }
-
-       return ret;
-}
-
-static int mxc_verify_speed(struct cpufreq_policy *policy)
-{
-       if (policy->cpu != 0)
-               return -EINVAL;
-
-       return cpufreq_frequency_table_verify(policy, imx_freq_table);
-}
-
-static unsigned int mxc_get_speed(unsigned int cpu)
-{
-       if (cpu)
-               return 0;
-
-       return clk_get_rate(cpu_clk) / 1000;
-}
-
-static int mxc_set_target(struct cpufreq_policy *policy,
-                         unsigned int target_freq, unsigned int relation)
-{
-       struct cpufreq_freqs freqs;
-       int freq_Hz;
-       int ret = 0;
-       unsigned int index;
-
-       cpufreq_frequency_table_target(policy, imx_freq_table,
-                       target_freq, relation, &index);
-       freq_Hz = imx_freq_table[index].frequency * 1000;
-
-       freqs.old = clk_get_rate(cpu_clk) / 1000;
-       freqs.new = freq_Hz / 1000;
-       freqs.cpu = 0;
-       freqs.flags = 0;
-       cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-       ret = set_cpu_freq(freq_Hz);
-
-       cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-       return ret;
-}
-
-static int mxc_cpufreq_init(struct cpufreq_policy *policy)
-{
-       int ret;
-       int i;
-
-       printk(KERN_INFO "i.MXC CPU frequency driver\n");
-
-       if (policy->cpu != 0)
-               return -EINVAL;
-
-       if (!get_cpu_op)
-               return -EINVAL;
-
-       cpu_clk = clk_get(NULL, "cpu_clk");
-       if (IS_ERR(cpu_clk)) {
-               printk(KERN_ERR "%s: failed to get cpu clock\n", __func__);
-               return PTR_ERR(cpu_clk);
-       }
-
-       cpu_op_tbl = get_cpu_op(&cpu_op_nr);
-
-       cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000;
-       cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000;
-
-       imx_freq_table = kmalloc(
-               sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1),
-                       GFP_KERNEL);
-       if (!imx_freq_table) {
-               ret = -ENOMEM;
-               goto err1;
-       }
-
-       for (i = 0; i < cpu_op_nr; i++) {
-               imx_freq_table[i].index = i;
-               imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000;
-
-               if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min)
-                       cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000;
-
-               if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max)
-                       cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000;
-       }
-
-       imx_freq_table[i].index = i;
-       imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-       policy->cur = clk_get_rate(cpu_clk) / 1000;
-       policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
-       policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
-
-       /* Manual states, that PLL stabilizes in two CLK32 periods */
-       policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
-
-       ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
-
-       if (ret < 0) {
-               printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
-                      __func__, ret);
-               goto err;
-       }
-
-       cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu);
-       return 0;
-err:
-       kfree(imx_freq_table);
-err1:
-       clk_put(cpu_clk);
-       return ret;
-}
-
-static int mxc_cpufreq_exit(struct cpufreq_policy *policy)
-{
-       cpufreq_frequency_table_put_attr(policy->cpu);
-
-       set_cpu_freq(cpu_freq_khz_max * 1000);
-       clk_put(cpu_clk);
-       kfree(imx_freq_table);
-       return 0;
-}
-
-static struct cpufreq_driver mxc_driver = {
-       .flags = CPUFREQ_STICKY,
-       .verify = mxc_verify_speed,
-       .target = mxc_set_target,
-       .get = mxc_get_speed,
-       .init = mxc_cpufreq_init,
-       .exit = mxc_cpufreq_exit,
-       .name = "imx",
-};
-
-static int mxc_cpufreq_driver_init(void)
-{
-       return cpufreq_register_driver(&mxc_driver);
-}
-
-static void mxc_cpufreq_driver_exit(void)
-{
-       cpufreq_unregister_driver(&mxc_driver);
-}
-
-module_init(mxc_cpufreq_driver_init);
-module_exit(mxc_cpufreq_driver_exit);
-
-MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>");
-MODULE_DESCRIPTION("CPUfreq driver for i.MX");
-MODULE_LICENSE("GPL");
index 9b7393234f6f2fd4014afb3f09812600e915f91e..9b5ddf5bbd339e4aff4012256762144c77332557 100644 (file)
@@ -33,7 +33,6 @@
 
 #include "common.h"
 #include "devices-imx51.h"
-#include "cpu_op-mx51.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx51.h"
@@ -285,10 +284,6 @@ static void __init eukrea_cpuimx51sd_init(void)
        mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
                                        ARRAY_SIZE(eukrea_cpuimx51sd_pads));
 
-#if defined(CONFIG_CPU_FREQ_IMX)
-       get_cpu_op = mx51_get_cpu_op;
-#endif
-
        imx51_add_imx_uart(0, &uart_pdata);
        imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
        imx51_add_imx2_wdt(0);
index 6c4d7feb452099fca871b5b11d344dddf2408d4f..f3d264a636fa9b751c8510fad2bb9af96cd3d8bd 100644 (file)
@@ -27,7 +27,6 @@
 
 #include "common.h"
 #include "devices-imx51.h"
-#include "cpu_op-mx51.h"
 #include "hardware.h"
 #include "iomux-mx51.h"
 
@@ -371,9 +370,6 @@ static void __init mx51_babbage_init(void)
 
        imx51_soc_init();
 
-#if defined(CONFIG_CPU_FREQ_IMX)
-       get_cpu_op = mx51_get_cpu_op;
-#endif
        imx51_babbage_common_init();
 
        imx51_add_imx_uart(0, &uart_pdata);