m68knommu: remove old cache management cruft from mm code

Remove cache management cruft.  This code is dead, all the cache manangement
functions for the ColdFire exist in the header file
include/asm-m68knommu/cacheflush.h.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/arch/m68knommu/mm/memory.c b/arch/m68knommu/mm/memory.c
index 411e45248e5caf9f164e53300bc346a90883a1fc..1a66b71035a46a71ff65de663cb21186f3c72b3d 100644 (file)
--- a/arch/m68knommu/mm/memory.c
+++ b/arch/m68knommu/mm/memory.c
@@ -17,90 +17,14 @@
 #include <linux/types.h>
 #include <linux/slab.h>
 
-#include <asm/setup.h>
 #include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/io.h>
 
 /*
- * cache_clear() semantics: Clear any cache entries for the area in question,
- * without writing back dirty entries first. This is useful if the data will
- * be overwritten anyway, e.g. by DMA to memory. The range is defined by a
- * _physical_ address.
- */
-
-void cache_clear (unsigned long paddr, int len)
-{
-}
-
-
-/*
- *     Define cache invalidate functions. The ColdFire 5407 is really
- *     the only processor that needs to do some work here. Anything
- *     that has separate data and instruction caches will be a problem.
- */
-#ifdef CONFIG_M5407
-
-static __inline__ void cache_invalidate_lines(unsigned long paddr, int len)
-{
-       unsigned long   sset, eset;
-
-       sset = (paddr & 0x00000ff0);
-       eset = ((paddr + len) & 0x0000ff0) + 0x10;
-
-       __asm__ __volatile__ (
-               "nop\n\t"
-               "clrl   %%d0\n\t"
-               "1:\n\t"
-               "movel  %0,%%a0\n\t"
-               "addl   %%d0,%%a0\n\t"
-               "2:\n\t"
-               ".word  0xf4e8\n\t"
-               "addl   #0x10,%%a0\n\t"
-               "cmpl   %1,%%a0\n\t"
-               "blt    2b\n\t"
-               "addql  #1,%%d0\n\t"
-               "cmpil  #4,%%d0\n\t"
-               "bne    1b"
-               : : "a" (sset), "a" (eset) : "d0", "a0" );
-}
-
-#else
-#define        cache_invalidate_lines(a,b)
-#endif
-
-
-/*
- * cache_push() semantics: Write back any dirty cache data in the given area,
- * and invalidate the range in the instruction cache. It needs not (but may)
- * invalidate those entries also in the data cache. The range is defined by a
- * _physical_ address.
- */
-
-void cache_push (unsigned long paddr, int len)
-{
-       cache_invalidate_lines(paddr, len);
-}
-
-
-/*
- * cache_push_v() semantics: Write back any dirty cache data in the given
- * area, and invalidate those entries at least in the instruction cache. This
- * is intended to be used after data has been written that can be executed as
- * code later. The range is defined by a _user_mode_ _virtual_ address  (or,
- * more exactly, the space is defined by the %sfc/%dfc register.)
- */
-
-void cache_push_v (unsigned long vaddr, int len)
-{
-       cache_invalidate_lines(vaddr, len);
-}
-
-/* Map some physical address range into the kernel address space. The
- * code is copied and adapted from map_chunk().
+ * Map some physical address range into the kernel address space.
+ * The code is copied and adapted from map_chunk().
  */
 
 unsigned long kernel_map(unsigned long paddr, unsigned long size,