#define pte_none(x) (!(x).pte_low)
/*
- * Bits 0, 6 and 7 are taken, split up the 29 bits of offset
- * into this range:
+ * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE and _PAGE_BIT_PROTNONE are taken,
+ * split up the 29 bits of offset into this range:
*/
#define PTE_FILE_MAX_BITS 29
+#define PTE_FILE_SHIFT1 (_PAGE_BIT_PRESENT + 1)
+#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
+#define PTE_FILE_SHIFT2 (_PAGE_BIT_FILE + 1)
+#define PTE_FILE_SHIFT3 (_PAGE_BIT_PROTNONE + 1)
+#else
+#define PTE_FILE_SHIFT2 (_PAGE_BIT_PROTNONE + 1)
+#define PTE_FILE_SHIFT3 (_PAGE_BIT_FILE + 1)
+#endif
+#define PTE_FILE_BITS1 (PTE_FILE_SHIFT2 - PTE_FILE_SHIFT1 - 1)
+#define PTE_FILE_BITS2 (PTE_FILE_SHIFT3 - PTE_FILE_SHIFT2 - 1)
#define pte_to_pgoff(pte) \
- ((((pte).pte_low >> 1) & 0x1f) + (((pte).pte_low >> 8) << 5))
+ ((((pte).pte_low >> PTE_FILE_SHIFT1) \
+ & ((1U << PTE_FILE_BITS1) - 1)) \
+ + ((((pte).pte_low >> PTE_FILE_SHIFT2) \
+ & ((1U << PTE_FILE_BITS2) - 1)) << PTE_FILE_BITS1) \
+ + (((pte).pte_low >> PTE_FILE_SHIFT3) \
+ << (PTE_FILE_BITS1 + PTE_FILE_BITS2)))
#define pgoff_to_pte(off) \
- ((pte_t) { .pte_low = (((off) & 0x1f) << 1) + \
- (((off) >> 5) << 8) + _PAGE_FILE })
+ ((pte_t) { .pte_low = \
+ (((off) & ((1U << PTE_FILE_BITS1) - 1)) << PTE_FILE_SHIFT1) \
+ + ((((off) >> PTE_FILE_BITS1) & ((1U << PTE_FILE_BITS2) - 1)) \
+ << PTE_FILE_SHIFT2) \
+ + (((off) >> (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \
+ << PTE_FILE_SHIFT3) \
+ + _PAGE_FILE })
/* Encode and de-code a swap entry */
-#define __swp_type(x) (((x).val >> 1) & 0x1f)
-#define __swp_offset(x) ((x).val >> 8)
-#define __swp_entry(type, offset) \
- ((swp_entry_t) { ((type) << 1) | ((offset) << 8) })
+#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
+#define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1)
+#define SWP_OFFSET_SHIFT (_PAGE_BIT_PROTNONE + 1)
+#else
+#define SWP_TYPE_BITS (_PAGE_BIT_PROTNONE - _PAGE_BIT_PRESENT - 1)
+#define SWP_OFFSET_SHIFT (_PAGE_BIT_FILE + 1)
+#endif
+
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS)
+
+#define __swp_type(x) (((x).val >> (_PAGE_BIT_PRESENT + 1)) \
+ & ((1U << SWP_TYPE_BITS) - 1))
+#define __swp_offset(x) ((x).val >> SWP_OFFSET_SHIFT)
+#define __swp_entry(type, offset) ((swp_entry_t) { \
+ ((type) << (_PAGE_BIT_PRESENT + 1)) \
+ | ((offset) << SWP_OFFSET_SHIFT) })
#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_low })
#define __swp_entry_to_pte(x) ((pte_t) { .pte = (x).val })
#define PTE_FILE_MAX_BITS 32
/* Encode and de-code a swap entry */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > 5)
#define __swp_type(x) (((x).val) & 0x1f)
#define __swp_offset(x) ((x).val >> 5)
#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) << 5})
#define _PAGE_BIT_PCD 4 /* page cache disabled */
#define _PAGE_BIT_ACCESSED 5 /* was accessed (raised by CPU) */
#define _PAGE_BIT_DIRTY 6 /* was written to (raised by CPU) */
-#define _PAGE_BIT_FILE 6
#define _PAGE_BIT_PSE 7 /* 4 MB (or 2MB) page */
#define _PAGE_BIT_PAT 7 /* on 4KB pages */
#define _PAGE_BIT_GLOBAL 8 /* Global TLB entry PPro+ */
#define _PAGE_BIT_CPA_TEST _PAGE_BIT_UNUSED1
#define _PAGE_BIT_NX 63 /* No execute: only valid after cpuid check */
+/* If _PAGE_BIT_PRESENT is clear, we use these: */
+/* - if the user mapped it with PROT_NONE; pte_present gives true */
+#define _PAGE_BIT_PROTNONE _PAGE_BIT_GLOBAL
+/* - set: nonlinear file mapping, saved PTE; unset:swap */
+#define _PAGE_BIT_FILE _PAGE_BIT_DIRTY
+
#define _PAGE_PRESENT (_AT(pteval_t, 1) << _PAGE_BIT_PRESENT)
#define _PAGE_RW (_AT(pteval_t, 1) << _PAGE_BIT_RW)
#define _PAGE_USER (_AT(pteval_t, 1) << _PAGE_BIT_USER)
#define _PAGE_NX (_AT(pteval_t, 0))
#endif
-/* If _PAGE_PRESENT is clear, we use these: */
-#define _PAGE_FILE _PAGE_DIRTY /* nonlinear file mapping,
- * saved PTE; unset:swap */
-#define _PAGE_PROTNONE _PAGE_PSE /* if the user mapped it with PROT_NONE;
- pte_present gives true */
+#define _PAGE_FILE (_AT(pteval_t, 1) << _PAGE_BIT_FILE)
+#define _PAGE_PROTNONE (_AT(pteval_t, 1) << _PAGE_BIT_PROTNONE)
#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
_PAGE_ACCESSED | _PAGE_DIRTY)
extern int direct_gbpages;
/* Encode and de-code a swap entry */
-#define __swp_type(x) (((x).val >> 1) & 0x3f)
-#define __swp_offset(x) ((x).val >> 8)
-#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 1) | \
- ((offset) << 8) })
+#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
+#define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1)
+#define SWP_OFFSET_SHIFT (_PAGE_BIT_PROTNONE + 1)
+#else
+#define SWP_TYPE_BITS (_PAGE_BIT_PROTNONE - _PAGE_BIT_PRESENT - 1)
+#define SWP_OFFSET_SHIFT (_PAGE_BIT_FILE + 1)
+#endif
+
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS)
+
+#define __swp_type(x) (((x).val >> (_PAGE_BIT_PRESENT + 1)) \
+ & ((1U << SWP_TYPE_BITS) - 1))
+#define __swp_offset(x) ((x).val >> SWP_OFFSET_SHIFT)
+#define __swp_entry(type, offset) ((swp_entry_t) { \
+ ((type) << (_PAGE_BIT_PRESENT + 1)) \
+ | ((offset) << SWP_OFFSET_SHIFT) })
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val((pte)) })
#define __swp_entry_to_pte(x) ((pte_t) { .pte = (x).val })
__initcall(procswaps_init);
#endif /* CONFIG_PROC_FS */
+#ifdef MAX_SWAPFILES_CHECK
+static int __init max_swapfiles_check(void)
+{
+ MAX_SWAPFILES_CHECK();
+ return 0;
+}
+late_initcall(max_swapfiles_check);
+#endif
+
/*
* Written 01/25/92 by Simmule Turner, heavily changed by Linus.
*