hpt366: add hpt3xx_disable_fast_irq() helper
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Fri, 10 Oct 2008 20:39:32 +0000 (22:39 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Fri, 10 Oct 2008 20:39:32 +0000 (22:39 +0200)
* Factor out disabling of "fast interrupt" prediction from
  init_hwif_hpt366() to hpt3xx_disable_fast_irq() helper.

* Use hpt3xx_disable_fast_irq() in ->init_chipset instead of
  ->init_hwif method.

  This is a preparation for adding proper PCI PM support.

While at it:

* Cache chip type in chip_type variable in hpt3xx_disable_fast_irq().

There should be no functional changes caused by this patch.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/pci/hpt366.c

index 9056e3acc78b41b95d942d86ac1a51c13ee3a256..ab6c217f104efe0051d33adda4fc48f344bda858 100644 (file)
@@ -971,6 +971,36 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f
        return 1;
 }
 
+static void __devinit hpt3xx_disable_fast_irq(struct pci_dev *dev, u8 mcr_addr)
+{
+       struct ide_host *host   = pci_get_drvdata(dev);
+       struct hpt_info *info   = host->host_priv + (&dev->dev == host->dev[1]);
+       u8  chip_type           = info->chip_type;
+       u8  new_mcr, old_mcr    = 0;
+
+       /*
+        * Disable the "fast interrupt" prediction.  Don't hold off
+        * on interrupts. (== 0x01 despite what the docs say)
+        */
+       pci_read_config_byte(dev, mcr_addr + 1, &old_mcr);
+
+       if (chip_type >= HPT374)
+               new_mcr = old_mcr & ~0x07;
+       else if (chip_type >= HPT370) {
+               new_mcr = old_mcr;
+               new_mcr &= ~0x02;
+#ifdef HPT_DELAY_INTERRUPT
+               new_mcr &= ~0x01;
+#else
+               new_mcr |=  0x01;
+#endif
+       } else                                  /* HPT366 and HPT368  */
+               new_mcr = old_mcr & ~0x80;
+
+       if (new_mcr != old_mcr)
+               pci_write_config_byte(dev, mcr_addr + 1, new_mcr);
+}
+
 static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
 {
        unsigned long io_base   = pci_resource_start(dev, 4);
@@ -1208,9 +1238,11 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
         * NOTE: This register is only writeable via I/O space.
         */
        if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ)
-
                outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c);
 
+       hpt3xx_disable_fast_irq(dev, 0x50);
+       hpt3xx_disable_fast_irq(dev, 0x54);
+
        return dev->irq;
 }
 
@@ -1264,7 +1296,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
        struct hpt_info *info   = hpt3xx_get_info(hwif->dev);
        int serialize           = HPT_SERIALIZE_IO;
        u8  chip_type           = info->chip_type;
-       u8  new_mcr, old_mcr    = 0;
 
        /* Cache the channel's MISC. control registers' offset */
        hwif->select_data       = hwif->channel ? 0x54 : 0x50;
@@ -1287,29 +1318,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
        /* Serialize access to this device if needed */
        if (serialize && hwif->mate)
                hwif->serialized = hwif->mate->serialized = 1;
-
-       /*
-        * Disable the "fast interrupt" prediction.  Don't hold off
-        * on interrupts. (== 0x01 despite what the docs say)
-        */
-       pci_read_config_byte(dev, hwif->select_data + 1, &old_mcr);
-
-       if (info->chip_type >= HPT374)
-               new_mcr = old_mcr & ~0x07;
-       else if (info->chip_type >= HPT370) {
-               new_mcr = old_mcr;
-               new_mcr &= ~0x02;
-
-#ifdef HPT_DELAY_INTERRUPT
-               new_mcr &= ~0x01;
-#else
-               new_mcr |=  0x01;
-#endif
-       } else                                  /* HPT366 and HPT368  */
-               new_mcr = old_mcr & ~0x80;
-
-       if (new_mcr != old_mcr)
-               pci_write_config_byte(dev, hwif->select_data + 1, new_mcr);
 }
 
 static int __devinit init_dma_hpt366(ide_hwif_t *hwif,