Staging: rtxxx0: unify RT{USB,MP}FilterCalibration()

RTMP_BBP_IO_{READ,WRITE}8_BY_REG_ID equals RTUSB{Read,Write}BBPRegister
in case of USB chipsets so unify RT30xx and !RT30xx code.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c
index 88c0615bf6c3e335e3a3e4a57770985de0e6a190..2dc3297c26d1fe07cd3d2303eea7537e38553a52 100644 (file)
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -1099,145 +1099,6 @@ NDIS_STATUS     NICReadRegParameters(
 
        ========================================================================
 */
-#ifndef RT30xx
-VOID RTUSBFilterCalibration(
-       IN PRTMP_ADAPTER pAd)
-{
-       UCHAR   R55x = 0, value, FilterTarget = 0x1E, BBPValue;
-       UINT    loop = 0, count = 0, loopcnt = 0, ReTry = 0;
-       UCHAR   RF_R24_Value = 0;
-
-       // Give bbp filter initial value
-       pAd->Mlme.CaliBW20RfR24 = 0x16;
-       pAd->Mlme.CaliBW40RfR24 = 0x36;  //Bit[5] must be 1 for BW 40
-
-       do
-       {
-               if (loop == 1)  //BandWidth = 40 MHz
-               {
-                       // Write 0x27 to RF_R24 to program filter
-                       RF_R24_Value = 0x27;
-                       RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-                       FilterTarget = 0x19;
-
-                       // when calibrate BW40, BBP mask must set to BW40.
-                       RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue);
-                       BBPValue&= (~0x18);
-                       BBPValue|= (0x10);
-                       RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue);
-               }
-               else                    //BandWidth = 20 MHz
-               {
-                       // Write 0x07 to RF_R24 to program filter
-                       RF_R24_Value = 0x07;
-                       RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-                       FilterTarget = 0x16;
-               }
-
-               // Write 0x01 to RF_R22 to enable baseband loopback mode
-               RT30xxReadRFRegister(pAd, RF_R22, &value);
-               value |= 0x01;
-               RT30xxWriteRFRegister(pAd, RF_R22, value);
-
-               // Write 0x00 to BBP_R24 to set power & frequency of passband test tone
-               RTUSBWriteBBPRegister(pAd, BBP_R24, 0);
-
-               do
-               {
-                       // Write 0x90 to BBP_R25 to transmit test tone
-                       RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90);
-
-                       RTMPusecDelay(1000);
-                       // Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0]
-                       RTUSBReadBBPRegister(pAd, BBP_R55, &value);
-                       R55x = value & 0xFF;
-
-               } while ((ReTry++ < 100) && (R55x == 0));
-
-               // Write 0x06 to BBP_R24 to set power & frequency of stopband test tone
-               RTUSBWriteBBPRegister(pAd, BBP_R24, 0x06);
-
-               while(TRUE)
-               {
-                       // Write 0x90 to BBP_R25 to transmit test tone
-                       RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90);
-
-                       //We need to wait for calibration
-                       RTMPusecDelay(1000);
-                       RTUSBReadBBPRegister(pAd, BBP_R55, &value);
-                       value &= 0xFF;
-                       if ((R55x - value) < FilterTarget)
-                       {
-                               RF_R24_Value ++;
-                       }
-                       else if ((R55x - value) == FilterTarget)
-                       {
-                               RF_R24_Value ++;
-                               count ++;
-                       }
-                       else
-                       {
-                               break;
-                       }
-
-                       // prevent infinite loop cause driver hang.
-                       if (loopcnt++ > 100)
-                       {
-                               DBGPRINT(RT_DEBUG_ERROR, ("RTUSBFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt));
-                               break;
-                       }
-
-                       // Write RF_R24 to program filter
-                       RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-               }
-
-               if (count > 0)
-               {
-                       RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0));
-               }
-
-               // Store for future usage
-               if (loopcnt < 100)
-               {
-                       if (loop++ == 0)
-                       {
-                               //BandWidth = 20 MHz
-                               pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value;
-                       }
-                       else
-                       {
-                               //BandWidth = 40 MHz
-                               pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value;
-                               break;
-                       }
-               }
-               else
-                       break;
-
-               RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-
-               // reset count
-               count = 0;
-       } while(TRUE);
-
-       //
-       // Set back to initial state
-       //
-       RTUSBWriteBBPRegister(pAd, BBP_R24, 0);
-
-       RT30xxReadRFRegister(pAd, RF_R22, &value);
-       value &= ~(0x01);
-       RT30xxWriteRFRegister(pAd, RF_R22, value);
-
-       // set BBP back to BW20
-       RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue);
-       BBPValue&= (~0x18);
-       RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue);
-
-       DBGPRINT(RT_DEBUG_TRACE, ("RTUSBFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
-}
-#endif /* RT30xx */
-#ifdef RT30xx
 VOID RTMPFilterCalibration(
        IN PRTMP_ADAPTER pAd)
 {
@@ -1246,9 +1107,13 @@ VOID RTMPFilterCalibration(
        UCHAR   RF_R24_Value = 0;
 
        // Give bbp filter initial value
+#ifndef RT30xx
+       pAd->Mlme.CaliBW20RfR24 = 0x16;
+       pAd->Mlme.CaliBW40RfR24 = 0x36;  //Bit[5] must be 1 for BW 40
+#else
        pAd->Mlme.CaliBW20RfR24 = 0x1F;
        pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40
-
+#endif
        do
        {
                if (loop == 1)  //BandWidth = 40 MHz
@@ -1266,11 +1131,12 @@ VOID RTMPFilterCalibration(
                        BBPValue&= (~0x18);
                        BBPValue|= (0x10);
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-
+#ifdef RT30xx
                        // set to BW40
                        RT30xxReadRFRegister(pAd, RF_R31, &value);
                        value |= 0x20;
                        RT30xxWriteRFRegister(pAd, RF_R31, value);
+#endif
                }
                else                    //BandWidth = 20 MHz
                {
@@ -1281,11 +1147,12 @@ VOID RTMPFilterCalibration(
                                FilterTarget = 0x13;
                        else
                                FilterTarget = 0x16;
-
+#ifdef RT30xx
                        // set to BW20
                        RT30xxReadRFRegister(pAd, RF_R31, &value);
                        value &= (~0x20);
                        RT30xxWriteRFRegister(pAd, RF_R31, value);
+#endif
                }
 
                // Write 0x01 to RF_R22 to enable baseband loopback mode
@@ -1390,7 +1257,6 @@ VOID RTMPFilterCalibration(
 
        DBGPRINT(RT_DEBUG_TRACE, ("RTMPFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
 }
-#endif /* RT30xx */
 
 VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
 {
@@ -1417,7 +1283,7 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
                 }
 
                 //For RF filter Calibration
-                RTUSBFilterCalibration(pAd);
+               RTMPFilterCalibration(pAd);
         }
 #endif
 #ifdef RT30xx