$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
vdso_install:
-ifeq ($(CONFIG_IA32_EMULATION),y)
- $(Q)$(MAKE) $(build)=arch/x86/ia32 $@
-endif
$(Q)$(MAKE) $(build)=arch/x86/vdso $@
archclean:
audit-class-$(CONFIG_AUDIT) := audit.o
obj-$(CONFIG_IA32_EMULATION) += $(audit-class-y)
-
-$(obj)/syscall32_syscall.o: \
- $(foreach F,sysenter syscall,$(obj)/vsyscall-$F.so)
-
-# Teach kbuild about targets
-targets := $(foreach F,$(addprefix vsyscall-,sysenter syscall),\
- $F.o $F.so $F.so.dbg)
-
-# The DSO images are built using a special linker script
-quiet_cmd_syscall = SYSCALL $@
- cmd_syscall = $(CC) -m32 -nostdlib -shared \
- $(call ld-option, -Wl$(comma)--hash-style=sysv) \
- -Wl,-soname=linux-gate.so.1 -o $@ \
- -Wl,-T,$(filter-out FORCE,$^)
-
-$(obj)/%.so: OBJCOPYFLAGS := -S
-$(obj)/%.so: $(obj)/%.so.dbg FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vsyscall-sysenter.so.dbg $(obj)/vsyscall-syscall.so.dbg: \
-$(obj)/vsyscall-%.so.dbg: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
- $(call if_changed,syscall)
-
-AFLAGS_vsyscall-sysenter.o = -m32 -Wa,-32
-AFLAGS_vsyscall-syscall.o = -m32 -Wa,-32
-
-vdsos := vdso32-sysenter.so vdso32-syscall.so
-
-quiet_cmd_vdso_install = INSTALL $@
- cmd_vdso_install = cp $(@:vdso32-%.so=$(obj)/vsyscall-%.so.dbg) \
- $(MODLIB)/vdso/$@
-
-$(vdsos):
- @mkdir -p $(MODLIB)/vdso
- $(call cmd,vdso_install)
-
-vdso_install: $(vdsos)
+++ /dev/null
-/*
- * Copyright 2002,2003 Andi Kleen, SuSE Labs
- *
- * vsyscall handling for 32bit processes. Map a stub page into it on
- * demand because 32bit cannot reach the kernel's fixmaps
- */
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/stringify.h>
-#include <linux/security.h>
-#include <asm/proto.h>
-#include <asm/tlbflush.h>
-#include <asm/ia32_unistd.h>
-#include <asm/vsyscall32.h>
-
-extern unsigned char syscall32_syscall[], syscall32_syscall_end[];
-extern unsigned char syscall32_sysenter[], syscall32_sysenter_end[];
-extern int sysctl_vsyscall32;
-
-static struct page *syscall32_pages[1];
-static int use_sysenter = -1;
-
-struct linux_binprm;
-
-/* Setup a VMA at program startup for the vsyscall page */
-int syscall32_setup_pages(struct linux_binprm *bprm, int exstack)
-{
- struct mm_struct *mm = current->mm;
- int ret;
-
- down_write(&mm->mmap_sem);
- /*
- * MAYWRITE to allow gdb to COW and set breakpoints
- *
- * Make sure the vDSO gets into every core dump.
- * Dumping its contents makes post-mortem fully interpretable later
- * without matching up the same kernel and hardware config to see
- * what PC values meant.
- */
- /* Could randomize here */
- ret = install_special_mapping(mm, VSYSCALL32_BASE, PAGE_SIZE,
- VM_READ|VM_EXEC|
- VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
- VM_ALWAYSDUMP,
- syscall32_pages);
- if (ret == 0) {
- current->mm->context.vdso = (void __user *)VSYSCALL32_BASE;
- current_thread_info()->sysenter_return = VSYSCALL32_SYSEXIT;
- }
- up_write(&mm->mmap_sem);
- return ret;
-}
-
-static int __init init_syscall32(void)
-{
- char *syscall32_page = (void *)get_zeroed_page(GFP_KERNEL);
-
- if (!syscall32_page)
- panic("Cannot allocate syscall32 page");
- syscall32_pages[0] = virt_to_page(syscall32_page);
- if (use_sysenter > 0) {
- memcpy(syscall32_page, syscall32_sysenter,
- syscall32_sysenter_end - syscall32_sysenter);
- } else {
- memcpy(syscall32_page, syscall32_syscall,
- syscall32_syscall_end - syscall32_syscall);
- }
- return 0;
-}
-__initcall(init_syscall32);
-
-/* May not be __init: called during resume */
-void syscall32_cpu_init(void)
-{
- if (use_sysenter < 0)
- use_sysenter = (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL);
-
- /*
- * Load these always in case some future AMD CPU supports
- * SYSENTER from compat mode too.
- */
- checking_wrmsrl(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
- checking_wrmsrl(MSR_IA32_SYSENTER_ESP, 0ULL);
- checking_wrmsrl(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target);
-
- wrmsrl(MSR_CSTAR, ia32_cstar_target);
-}
+++ /dev/null
-/* 32bit VDSOs mapped into user space. */
-
- .section ".init.data","aw"
-
- .globl syscall32_syscall
- .globl syscall32_syscall_end
-
-syscall32_syscall:
- .incbin "arch/x86/ia32/vsyscall-syscall.so"
-syscall32_syscall_end:
-
- .globl syscall32_sysenter
- .globl syscall32_sysenter_end
-
-syscall32_sysenter:
- .incbin "arch/x86/ia32/vsyscall-sysenter.so"
-syscall32_sysenter_end:
+++ /dev/null
-/*
- * Common code for the sigreturn entry points on the vsyscall page.
- * This code uses SYSCALL_ENTER_KERNEL (either syscall or int $0x80)
- * to enter the kernel.
- * This file is #include'd by vsyscall-*.S to define them after the
- * vsyscall entry point. The addresses we get for these entry points
- * by doing ".balign 32" must match in both versions of the page.
- */
-
- .code32
- .section .text.sigreturn,"ax"
- .balign 32
- .globl __kernel_sigreturn
- .type __kernel_sigreturn,@function
-__kernel_sigreturn:
-.LSTART_sigreturn:
- popl %eax
- movl $__NR_ia32_sigreturn, %eax
- SYSCALL_ENTER_KERNEL
-.LEND_sigreturn:
- .size __kernel_sigreturn,.-.LSTART_sigreturn
-
- .section .text.rtsigreturn,"ax"
- .balign 32
- .globl __kernel_rt_sigreturn
- .type __kernel_rt_sigreturn,@function
-__kernel_rt_sigreturn:
-.LSTART_rt_sigreturn:
- movl $__NR_ia32_rt_sigreturn, %eax
- SYSCALL_ENTER_KERNEL
-.LEND_rt_sigreturn:
- .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
-
- .section .eh_frame,"a",@progbits
-.LSTARTFRAMES:
- .long .LENDCIES-.LSTARTCIES
-.LSTARTCIES:
- .long 0 /* CIE ID */
- .byte 1 /* Version number */
- .string "zRS" /* NUL-terminated augmentation string */
- .uleb128 1 /* Code alignment factor */
- .sleb128 -4 /* Data alignment factor */
- .byte 8 /* Return address register column */
- .uleb128 1 /* Augmentation value length */
- .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
- .byte 0x0c /* DW_CFA_def_cfa */
- .uleb128 4
- .uleb128 4
- .byte 0x88 /* DW_CFA_offset, column 0x8 */
- .uleb128 1
- .align 4
-.LENDCIES:
-
- .long .LENDFDE2-.LSTARTFDE2 /* Length FDE */
-.LSTARTFDE2:
- .long .LSTARTFDE2-.LSTARTFRAMES /* CIE pointer */
- /* HACK: The dwarf2 unwind routines will subtract 1 from the
- return address to get an address in the middle of the
- presumed call instruction. Since we didn't get here via
- a call, we need to include the nop before the real start
- to make up for it. */
- .long .LSTART_sigreturn-1-. /* PC-relative start address */
- .long .LEND_sigreturn-.LSTART_sigreturn+1
- .uleb128 0 /* Augmentation length */
- /* What follows are the instructions for the table generation.
- We record the locations of each register saved. This is
- complicated by the fact that the "CFA" is always assumed to
- be the value of the stack pointer in the caller. This means
- that we must define the CFA of this body of code to be the
- saved value of the stack pointer in the sigcontext. Which
- also means that there is no fixed relation to the other
- saved registers, which means that we must use DW_CFA_expression
- to compute their addresses. It also means that when we
- adjust the stack with the popl, we have to do it all over again. */
-
-#define do_cfa_expr(offset) \
- .byte 0x0f; /* DW_CFA_def_cfa_expression */ \
- .uleb128 1f-0f; /* length */ \
-0: .byte 0x74; /* DW_OP_breg4 */ \
- .sleb128 offset; /* offset */ \
- .byte 0x06; /* DW_OP_deref */ \
-1:
-
-#define do_expr(regno, offset) \
- .byte 0x10; /* DW_CFA_expression */ \
- .uleb128 regno; /* regno */ \
- .uleb128 1f-0f; /* length */ \
-0: .byte 0x74; /* DW_OP_breg4 */ \
- .sleb128 offset; /* offset */ \
-1:
-
- do_cfa_expr(IA32_SIGCONTEXT_esp+4)
- do_expr(0, IA32_SIGCONTEXT_eax+4)
- do_expr(1, IA32_SIGCONTEXT_ecx+4)
- do_expr(2, IA32_SIGCONTEXT_edx+4)
- do_expr(3, IA32_SIGCONTEXT_ebx+4)
- do_expr(5, IA32_SIGCONTEXT_ebp+4)
- do_expr(6, IA32_SIGCONTEXT_esi+4)
- do_expr(7, IA32_SIGCONTEXT_edi+4)
- do_expr(8, IA32_SIGCONTEXT_eip+4)
-
- .byte 0x42 /* DW_CFA_advance_loc 2 -- nop; popl eax. */
-
- do_cfa_expr(IA32_SIGCONTEXT_esp)
- do_expr(0, IA32_SIGCONTEXT_eax)
- do_expr(1, IA32_SIGCONTEXT_ecx)
- do_expr(2, IA32_SIGCONTEXT_edx)
- do_expr(3, IA32_SIGCONTEXT_ebx)
- do_expr(5, IA32_SIGCONTEXT_ebp)
- do_expr(6, IA32_SIGCONTEXT_esi)
- do_expr(7, IA32_SIGCONTEXT_edi)
- do_expr(8, IA32_SIGCONTEXT_eip)
-
- .align 4
-.LENDFDE2:
-
- .long .LENDFDE3-.LSTARTFDE3 /* Length FDE */
-.LSTARTFDE3:
- .long .LSTARTFDE3-.LSTARTFRAMES /* CIE pointer */
- /* HACK: See above wrt unwind library assumptions. */
- .long .LSTART_rt_sigreturn-1-. /* PC-relative start address */
- .long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1
- .uleb128 0 /* Augmentation */
- /* What follows are the instructions for the table generation.
- We record the locations of each register saved. This is
- slightly less complicated than the above, since we don't
- modify the stack pointer in the process. */
-
- do_cfa_expr(IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_esp)
- do_expr(0, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_eax)
- do_expr(1, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ecx)
- do_expr(2, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_edx)
- do_expr(3, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ebx)
- do_expr(5, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ebp)
- do_expr(6, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_esi)
- do_expr(7, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_edi)
- do_expr(8, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_eip)
-
- .align 4
-.LENDFDE3:
-
-#include "../vdso/vdso32/note.S"
+++ /dev/null
-/*
- * Code for the vsyscall page. This version uses the syscall instruction.
- */
-
-#include <asm/ia32_unistd.h>
-#include <asm/asm-offsets.h>
-#include <asm/segment.h>
-
- .code32
- .text
- .section .text.vsyscall,"ax"
- .globl __kernel_vsyscall
- .type __kernel_vsyscall,@function
-__kernel_vsyscall:
-.LSTART_vsyscall:
- push %ebp
-.Lpush_ebp:
- movl %ecx, %ebp
- syscall
- movl $__USER32_DS, %ecx
- movl %ecx, %ss
- movl %ebp, %ecx
- popl %ebp
-.Lpop_ebp:
- ret
-.LEND_vsyscall:
- .size __kernel_vsyscall,.-.LSTART_vsyscall
-
- .section .eh_frame,"a",@progbits
-.LSTARTFRAME:
- .long .LENDCIE-.LSTARTCIE
-.LSTARTCIE:
- .long 0 /* CIE ID */
- .byte 1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
- .uleb128 1 /* Code alignment factor */
- .sleb128 -4 /* Data alignment factor */
- .byte 8 /* Return address register column */
- .uleb128 1 /* Augmentation value length */
- .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
- .byte 0x0c /* DW_CFA_def_cfa */
- .uleb128 4
- .uleb128 4
- .byte 0x88 /* DW_CFA_offset, column 0x8 */
- .uleb128 1
- .align 4
-.LENDCIE:
-
- .long .LENDFDE1-.LSTARTFDE1 /* Length FDE */
-.LSTARTFDE1:
- .long .LSTARTFDE1-.LSTARTFRAME /* CIE pointer */
- .long .LSTART_vsyscall-. /* PC-relative start address */
- .long .LEND_vsyscall-.LSTART_vsyscall
- .uleb128 0 /* Augmentation length */
- /* What follows are the instructions for the table generation.
- We have to record all changes of the stack pointer. */
- .byte 0x40 + .Lpush_ebp-.LSTART_vsyscall /* DW_CFA_advance_loc */
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .uleb128 8
- .byte 0x85, 0x02 /* DW_CFA_offset %ebp -8 */
- .byte 0x40 + .Lpop_ebp-.Lpush_ebp /* DW_CFA_advance_loc */
- .byte 0xc5 /* DW_CFA_restore %ebp */
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .uleb128 4
- .align 4
-.LENDFDE1:
-
-#define SYSCALL_ENTER_KERNEL syscall
-#include "vsyscall-sigreturn.S"
+++ /dev/null
-/*
- * Code for the vsyscall page. This version uses the sysenter instruction.
- */
-
-#include <asm/ia32_unistd.h>
-#include <asm/asm-offsets.h>
-
- .code32
- .text
- .section .text.vsyscall,"ax"
- .globl __kernel_vsyscall
- .type __kernel_vsyscall,@function
-__kernel_vsyscall:
-.LSTART_vsyscall:
- push %ecx
-.Lpush_ecx:
- push %edx
-.Lpush_edx:
- push %ebp
-.Lenter_kernel:
- movl %esp,%ebp
- sysenter
- .space 7,0x90
- jmp .Lenter_kernel
- /* 16: System call normal return point is here! */
- pop %ebp
-.Lpop_ebp:
- pop %edx
-.Lpop_edx:
- pop %ecx
-.Lpop_ecx:
- ret
-.LEND_vsyscall:
- .size __kernel_vsyscall,.-.LSTART_vsyscall
-
- .section .eh_frame,"a",@progbits
-.LSTARTFRAME:
- .long .LENDCIE-.LSTARTCIE
-.LSTARTCIE:
- .long 0 /* CIE ID */
- .byte 1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
- .uleb128 1 /* Code alignment factor */
- .sleb128 -4 /* Data alignment factor */
- .byte 8 /* Return address register column */
- .uleb128 1 /* Augmentation value length */
- .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
- .byte 0x0c /* DW_CFA_def_cfa */
- .uleb128 4
- .uleb128 4
- .byte 0x88 /* DW_CFA_offset, column 0x8 */
- .uleb128 1
- .align 4
-.LENDCIE:
-
- .long .LENDFDE1-.LSTARTFDE1 /* Length FDE */
-.LSTARTFDE1:
- .long .LSTARTFDE1-.LSTARTFRAME /* CIE pointer */
- .long .LSTART_vsyscall-. /* PC-relative start address */
- .long .LEND_vsyscall-.LSTART_vsyscall
- .uleb128 0 /* Augmentation length */
- /* What follows are the instructions for the table generation.
- We have to record all changes of the stack pointer. */
- .byte 0x04 /* DW_CFA_advance_loc4 */
- .long .Lpush_ecx-.LSTART_vsyscall
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .byte 0x08 /* RA at offset 8 now */
- .byte 0x04 /* DW_CFA_advance_loc4 */
- .long .Lpush_edx-.Lpush_ecx
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .byte 0x0c /* RA at offset 12 now */
- .byte 0x04 /* DW_CFA_advance_loc4 */
- .long .Lenter_kernel-.Lpush_edx
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .byte 0x10 /* RA at offset 16 now */
- .byte 0x85, 0x04 /* DW_CFA_offset %ebp -16 */
- /* Finally the epilogue. */
- .byte 0x04 /* DW_CFA_advance_loc4 */
- .long .Lpop_ebp-.Lenter_kernel
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .byte 0x12 /* RA at offset 12 now */
- .byte 0xc5 /* DW_CFA_restore %ebp */
- .byte 0x04 /* DW_CFA_advance_loc4 */
- .long .Lpop_edx-.Lpop_ebp
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .byte 0x08 /* RA at offset 8 now */
- .byte 0x04 /* DW_CFA_advance_loc4 */
- .long .Lpop_ecx-.Lpop_edx
- .byte 0x0e /* DW_CFA_def_cfa_offset */
- .byte 0x04 /* RA at offset 4 now */
- .align 4
-.LENDFDE1:
-
-#define SYSCALL_ENTER_KERNEL int $0x80
-#include "vsyscall-sigreturn.S"
+++ /dev/null
-/*
- * Linker script for vsyscall DSO. The vsyscall page is an ELF shared
- * object prelinked to its virtual address. This script controls its layout.
- */
-
-/* This must match <asm/fixmap.h>. */
-VSYSCALL_BASE = 0xffffe000;
-
-SECTIONS
-{
- . = VSYSCALL_BASE + SIZEOF_HEADERS;
-
- .hash : { *(.hash) } :text
- .gnu.hash : { *(.gnu.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
-
- /* This linker script is used both with -r and with -shared.
- For the layouts to match, we need to skip more than enough
- space for the dynamic symbol table et al. If this amount
- is insufficient, ld -shared will barf. Just increase it here. */
- . = VSYSCALL_BASE + 0x400;
-
- .text.vsyscall : { *(.text.vsyscall) } :text =0x90909090
-
- /* This is an 32bit object and we cannot easily get the offsets
- into the 64bit kernel. Just hardcode them here. This assumes
- that all the stubs don't need more than 0x100 bytes. */
- . = VSYSCALL_BASE + 0x500;
-
- .text.sigreturn : { *(.text.sigreturn) } :text =0x90909090
-
- . = VSYSCALL_BASE + 0x600;
-
- .text.rtsigreturn : { *(.text.rtsigreturn) } :text =0x90909090
-
- .note : { *(.note.*) } :text :note
- .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr
- .eh_frame : { KEEP (*(.eh_frame)) } :text
- .dynamic : { *(.dynamic) } :text :dynamic
- .useless : {
- *(.got.plt) *(.got)
- *(.data .data.* .gnu.linkonce.d.*)
- *(.dynbss)
- *(.bss .bss.* .gnu.linkonce.b.*)
- } :text
-}
-
-/*
- * We must supply the ELF program headers explicitly to get just one
- * PT_LOAD segment, and set the flags explicitly to make segments read-only.
- */
-PHDRS
-{
- text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
- dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
- note PT_NOTE FLAGS(4); /* PF_R */
- eh_frame_hdr 0x6474e550; /* PT_GNU_EH_FRAME, but ld doesn't match the name */
-}
-
-/*
- * This controls what symbols we export from the DSO.
- */
-VERSION
-{
- LINUX_2.5 {
- global:
- __kernel_vsyscall;
- __kernel_sigreturn;
- __kernel_rt_sigreturn;
-
- local: *;
- };
-}
-
-/* The ELF entry point can be used to set the AT_SYSINFO value. */
-ENTRY(__kernel_vsyscall);
header-y += ptrace-abi.h
header-y += sigcontext32.h
header-y += ucontext.h
-header-y += vsyscall32.h
unifdef-y += e820.h
unifdef-y += ist.h
+++ /dev/null
-#ifndef _ASM_VSYSCALL32_H
-#define _ASM_VSYSCALL32_H 1
-
-/* Values need to match arch/x86_64/ia32/vsyscall.lds */
-
-#ifdef __ASSEMBLY__
-#define VSYSCALL32_BASE 0xffffe000
-#define VSYSCALL32_SYSEXIT (VSYSCALL32_BASE + 0x410)
-#else
-#define VSYSCALL32_BASE 0xffffe000UL
-#define VSYSCALL32_END (VSYSCALL32_BASE + PAGE_SIZE)
-#define VSYSCALL32_EHDR ((const struct elf32_hdr *) VSYSCALL32_BASE)
-
-#define VSYSCALL32_VSYSCALL ((void *)VSYSCALL32_BASE + 0x400)
-#define VSYSCALL32_SYSEXIT ((void *)VSYSCALL32_BASE + 0x410)
-#define VSYSCALL32_SIGRETURN ((void __user *)VSYSCALL32_BASE + 0x500)
-#define VSYSCALL32_RTSIGRETURN ((void __user *)VSYSCALL32_BASE + 0x600)
-#endif
-
-#endif
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff