tg3: Relocate tg3_find_peer

This patch relocates tg3_find_peer to eliminate a prototype.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index bbe1394b11ad6608e4357eb501b493c661a9b3bc..cc092170dfa3c1f78924fed845cbd64388650df2 100644 (file)
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -13847,8 +13847,6 @@ done:
        tp->fw_ver[TG3_VER_SIZE - 1] = 0;
 }
 
-static struct pci_dev * __devinit tg3_find_peer(struct tg3 *);
-
 static inline u32 tg3_rx_ret_ring_size(struct tg3 *tp)
 {
        if (tg3_flag(tp, LRG_PROD_RING_CAP))
@@ -13866,6 +13864,34 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_write_reorder_chipsets) = {
        { },
 };
 
+static struct pci_dev * __devinit tg3_find_peer(struct tg3 *tp)
+{
+       struct pci_dev *peer;
+       unsigned int func, devnr = tp->pdev->devfn & ~7;
+
+       for (func = 0; func < 8; func++) {
+               peer = pci_get_slot(tp->pdev->bus, devnr | func);
+               if (peer && peer != tp->pdev)
+                       break;
+               pci_dev_put(peer);
+       }
+       /* 5704 can be configured in single-port mode, set peer to
+        * tp->pdev in that case.
+        */
+       if (!peer) {
+               peer = tp->pdev;
+               return peer;
+       }
+
+       /*
+        * We don't need to keep the refcount elevated; there's no way
+        * to remove one half of this device without removing the other
+        */
+       pci_dev_put(peer);
+
+       return peer;
+}
+
 static int __devinit tg3_get_invariants(struct tg3 *tp)
 {
        u32 misc_ctrl_reg;
@@ -15364,34 +15390,6 @@ static char * __devinit tg3_bus_string(struct tg3 *tp, char *str)
        return str;
 }
 
-static struct pci_dev * __devinit tg3_find_peer(struct tg3 *tp)
-{
-       struct pci_dev *peer;
-       unsigned int func, devnr = tp->pdev->devfn & ~7;
-
-       for (func = 0; func < 8; func++) {
-               peer = pci_get_slot(tp->pdev->bus, devnr | func);
-               if (peer && peer != tp->pdev)
-                       break;
-               pci_dev_put(peer);
-       }
-       /* 5704 can be configured in single-port mode, set peer to
-        * tp->pdev in that case.
-        */
-       if (!peer) {
-               peer = tp->pdev;
-               return peer;
-       }
-
-       /*
-        * We don't need to keep the refcount elevated; there's no way
-        * to remove one half of this device without removing the other
-        */
-       pci_dev_put(peer);
-
-       return peer;
-}
-
 static void __devinit tg3_init_coal(struct tg3 *tp)
 {
        struct ethtool_coalesce *ec = &tp->coal;