u32 phy_id = 0;
s32 ret_val;
u16 retry_count;
+ u32 mac_reg = 0;
for (retry_count = 0; retry_count < 2; retry_count++) {
ret_val = e1e_rphy_locked(hw, MII_PHYSID1, &phy_reg);
if (hw->phy.id) {
if (hw->phy.id == phy_id)
- return true;
+ goto out;
} else if (phy_id) {
hw->phy.id = phy_id;
hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK);
- return true;
+ goto out;
}
/* In case the PHY needs to be in mdio slow mode,
ret_val = e1000e_get_phy_id(hw);
hw->phy.ops.acquire(hw);
- return !ret_val;
+ if (ret_val)
+ return false;
+out:
+ if (hw->mac.type == e1000_pch_lpt) {
+ /* Unforce SMBus mode in PHY */
+ e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg);
+ phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
+ e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg);
+
+ /* Unforce SMBus mode in MAC */
+ mac_reg = er32(CTRL_EXT);
+ mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_reg);
+ }
+
+ return true;
}
/**
{
u32 mac_reg, fwsm = er32(FWSM);
s32 ret_val;
- u16 phy_reg;
/* Gate automatic PHY configuration by hardware on managed and
* non-managed 82579 and newer adapters.
mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
ew32(CTRL_EXT, mac_reg);
+ /* Wait 50 milliseconds for MAC to finish any retries
+ * that it might be trying to perform from previous
+ * attempts to acknowledge any phy read requests.
+ */
+ msleep(50);
+
/* fall-through */
case e1000_pch2lan:
- if (e1000_phy_is_accessible_pchlan(hw)) {
- if (hw->mac.type == e1000_pch_lpt) {
- /* Unforce SMBus mode in PHY */
- e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg);
- phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
- e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg);
-
- /* Unforce SMBus mode in MAC */
- mac_reg = er32(CTRL_EXT);
- mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
- ew32(CTRL_EXT, mac_reg);
- }
+ if (e1000_phy_is_accessible_pchlan(hw))
break;
- }
/* fall-through */
case e1000_pchlan:
if (hw->phy.ops.check_reset_block(hw)) {
e_dbg("Required LANPHYPC toggle blocked by ME\n");
+ ret_val = -E1000_ERR_PHY;
break;
}
mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
ew32(FEXTNVM3, mac_reg);
- if (hw->mac.type == e1000_pch_lpt) {
- /* Toggling LANPHYPC brings the PHY out of SMBus mode
- * So ensure that the MAC is also out of SMBus mode
- */
- mac_reg = er32(CTRL_EXT);
- mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
- ew32(CTRL_EXT, mac_reg);
- }
-
/* Toggle LANPHYPC Value bit */
mac_reg = er32(CTRL);
mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
usleep_range(5000, 10000);
} while (!(er32(CTRL_EXT) &
E1000_CTRL_EXT_LPCD) && count--);
+ usleep_range(30000, 60000);
+ if (e1000_phy_is_accessible_pchlan(hw))
+ break;
+
+ /* Toggling LANPHYPC brings the PHY out of SMBus mode
+ * so ensure that the MAC is also out of SMBus mode
+ */
+ mac_reg = er32(CTRL_EXT);
+ mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_reg);
+
+ if (e1000_phy_is_accessible_pchlan(hw))
+ break;
+
+ ret_val = -E1000_ERR_PHY;
}
break;
default:
}
hw->phy.ops.release(hw);
-
- /* Reset the PHY before any access to it. Doing so, ensures
- * that the PHY is in a known good state before we read/write
- * PHY registers. The generic reset is sufficient here,
- * because we haven't determined the PHY type yet.
- */
- ret_val = e1000e_phy_hw_reset_generic(hw);
+ if (!ret_val) {
+ /* Reset the PHY before any access to it. Doing so, ensures
+ * that the PHY is in a known good state before we read/write
+ * PHY registers. The generic reset is sufficient here,
+ * because we haven't determined the PHY type yet.
+ */
+ ret_val = e1000e_phy_hw_reset_generic(hw);
+ }
out:
/* Ungate automatic PHY configuration on non-managed 82579 */